E1 TAPES & ROLLS

TAPE TACK PLASTIC BODY SIDE MOLDING ADHESION PROMOTER Apply Tape Tack to the back side of a plastic molding prior to attaching your double faced tape. Peel the backing strip and attach the molding to the car body. Dauber in cap. 8 oz. Can # BTT

THIX STIX ACRYLIC MOLDING TAPE This tape is designed to conform to the irregular surfaces commonly found on moldings that are reused. This new solid acrylic core offers superior strength is formulated with the most aggressive acrylic adhesive currently available. .045 thickness to provide extra clearance between molding and body. Provides instant and permanent adhesion to all types of moldings and automotive finishes. Resistant to heat and ultraviolet Especially suited for moldings with edges that may prevent effective bonding to the body side when thinner tapes are used. 1/4” x 72’ # RXX-1/4 3/8” # RXX-3/8 1/2” # RXX-1/2 5/8” # RXX-5/8 1” # RXX-1

.045 for Lipped Moldings

.030 .063 .045

E2 TAPES & ROLLS

PERMA STIK ACRYLIC MOLDING TAPE .030 thickness is ideal for flush mount moldings. This new solid acrylic core offers superior strength is formulated with the most aggressive acrylic adhesive currently available. This tape is designed to conform to the irregular surfaces commonly found on moldings that are reused. Provides instant and permanent adhesion to all types of moldings and automotive finishes. Resistant to heat and ultraviolet 1/8” x 72’ # RPS-1/8 1/4” # RPS-1/4 3/8” # RPS-3/8 1/2” # RPS-1/2 5/8” # RPS-5/8 1” # RPS-1

.030 for Standard Moldings

MEGA STIK ACRYLIC MOLDING TAPE .063 thickness is ideal for the ridicules molding on today's cars. The same high tech solid acrylic core as our other two sided molding tapes, just designed to go the distance required on the new OEM applications of today’s vehicles. 1/4” x 65’ # RMM-1/4 3/8” # RMM-3/8 1/2” # RMM-1/2 5/8” # RMM-5/8 1” # RMM-1

.063 Thickness

NEW

3/8”

1/4”

1/2”

5/8”

1”

1/8”

E3 TAPES & ROLLS

CLEAR MOLDING TAPE EXTREMELY STRONG ACRYLIC ADHESIVE Excellent for when you can remove a molding perfectly intact, ready to go right back on… if it was just sticky. 1/2”x 108’ T4965-1/2 3/4” T4965-3/4

Painting Just Got Easier!

Painting Just Got Easier!

LIFT MASKING TAPE 2 Formulas, More Flexible ! The 10 mm plastic strip bends more easily then other types which allows masking more easily around corners. Use with both solvent and water based paints. Save time and labor by lifting rather than removing to paint under moldings. These specialized masking tapes with a 10 mm band that slides under trim moldings (flush mount windshield, side and back glass moldings) to lift the molding and allow the technician to spray paint underneath the molding. They are perforated every 1 7/8 “. No razor required to cut these tapes. The Natural color masking tape has been reinforced for greater strength and resistance to tearing. 1 roll per box. 10 mm band x 1.75” width x 10.94 yards. Natural # RLT10N 10 mm band x 1.75” width x 10.94 yards. Blue # RLT10

CLEAR EMBLEM TAPE Glue on a roll. Perfect for script emblems.

5/8”x 180’ RME 5/8 1” RME 1

NEW

E4 TAPES & ROLLS

BLUE FINE LINE Premium tape, good for curved line work, very flexible, excellent adhesion. Edges will not curl up in heated paint booth. 1/8” x 36 yrds. # ZFL-1/8 B 1/4” “ # ZFL-1/4 B 1/2” “ # ZFL-1/2 B

NEW

SPONGEE CORD DOOR APERTURE FOAM MASKING TAPE Advanced foam masking tape for masking of all gaps on vehicles. Provides a soft edge to prevent tape lines in the jamb areas. Temperature resistant. 13mm x 50M # RSC13 17mm x 40M # RSC17

E5 TAPES & ROLLS

MOLESKIN / FELT TAPE Ideal for squeaks and vibration elimination. 1” x 50’ # RMS 1 2” x 50’ # RMS 2

SILVER DUCT TAPE Strong yet Economical. 2” X 180’ Roll # ZRDT

AEROSPACE MASKING TAPE Finest quality, Approved for up to 3OO Degrees F°. 3/4” x 48 per case # ZMT-3/4 2” x 24 per case # ZMT-2 ELECTRICAL TAPE Made in America. U.L. approved 3/4” x 60’ /10 Sleeve # RTT1

RMS-2

RMS-1

ZRDT

PAPER TAPE Ideal for a backing tape for plastic repairs as well as for windshields and special masking jobs. Water resistant. 2” x 180’ # RPT

E6 TAPES & ROLLS

PLASTIC PACKING TAPE HD PREMIUM Clear 2” x 55 yards 3.0 mil # ZPVCH Economy Clear 2” x 110 yards 1.7 mil # ZPVCE Dispensor # ZPVCD

ZPVCE

T317-3/4 T317-2

ZPVCD

ZPVCH

WATERPROOF CLOTH PROTECTIVE TAPE Excellent GRINDING TAPE Agressive, heavy duty adhesive 100 M.P.H. tape Army type Multipurpose,every garage needs one

165’ Length Rolls 2” Red # RCR-2 2” Olive # RCO-2 2” Gray # RCG-2 2” Black # RCB-2 4” Black # RCB-4

NYLON STRAPPING TAPE 3/4” 60 yards # T317-3/4 2” “ “ # T317-2

SPONGE RUBBER SHIM STOCK Preasure Sensitive Adhesive Backing Closed cell construction. Just strip off proitective backing and press into place

RRS-1 5/32 x 5/8 x 10’

RRS-4 5/32 x 1 x 50’

RRS-5 5/16 x 1 x 50’

RRS-6 5/16 x 3/8 x 50’

RRS-9 7/16 x 3/4 x 50’

(ACTUAL SIZE)

E7 TAPES & ROLLS

WHEEL OPENING SEALER TAPE MATCH OEM - TOYOTA, LEXUS & HONDA INNER / OUTER PANEL WELD FLANGE The Simple Solution to duplicate OEM wheel openings. Duplicate Toyota and Import look with this flexible tape with excellent adhesion that is paintable immediately! 2 mm H x 12 mm W x 1 M Length” # RWOS2 3 mm H x 12 mm W x 1 M Length” # RWOS3 ( 1/2” W x 3’3” Length)

RWOS2 RWOS3 RWOS2 RWOS3

E8 TAPES & ROLLS

8 mm or 5/16”

10 mm or 3/8”

8 mm/ 5/16” x 8M / 26’3” # RTW 8 10 mm/ 3/8” x 8M / 26’3” # RTW10 Deluxe Seam Tape Roller # WSR2

INSTA-SEAL SEAM TAPE MATCH OEM The Simple Solution to duplicate OEM appearance on doors, hoods and deck lids that were sealed with tape at the factory. Duplicate Toyota and Import look with this flexible tape with excellent adhesion, that is paintable immediately!

INSTA SEAL KIT # RTWK Contains: 8 mm/ 5/16” # RTW 8 10 mm/ 3/8” # RTW10 Deluxe Seam Tape Roller # WSR2 Gray Etch Coat # APE