B&HQuality, Service and Warranty, Surpassing All Others

CANOPY

B&H Fabrication & Erection

designs, engineers, fabricates,

and installs all sizes and

shapes of canopies. We also

build fascias for new and

existing buildings.

STRUCTURAL:B&H Canopies are made with bolt together construction and are engineered using ground snow loading, specific to your locale. Columns are 10 inch square or 16 inch round ASTM A500 Grade B. Wide flange beams conform to ASTM A992. All structural components are primed prior to shipping. Engineered drawings and anchor bolts, nuts and washers will be supplied to your footing installer.

DECKING:B&H Fabrication uses 20 gauge, 80 gloss white coated galvanized steel for their decking. 12 inch wide deck pans provide over 30% more deck to structural steel connection points than 16 inch deck pans. This will give you the increased strength you deserve without the increased cost. Bronze decking is also available for diesel canopy applications.

SEALED DRAINAGE SYSTEM:Our unique Sealed Drainage System provides continuous PVC from perimeter gutters to exits at columns or to underground systems.

FASCIA MATERIALS:Fascia Materials provide ultimate stiffness to eliminate “Oil Canning”. There are no visible fasteners, no vertical trim pieces and no corner trim pieces, providing a “Clean Look” for your canopy or building.

B&H FABRICATION & ERECTION320 Sheridan Road Foley, MN 56329-8523

Phone: (320) 968-8955 Fax: (320) 205-5002

www.BHCanopy.com

Jim Beyl and Eric Humphreys

Proudly fabricating quality

canopies since 1989.