7/30/2019 014_AR500F Product Data Sheet 2012 04 01
1/2
ABRASION RESISTANT PLATE Product Data Sheet 2012 04 01
P a g e | 1
www.ssab.com
AR500FAbrasion Resistant Steel Plate
General Product DescriptionAR500F is a through-hardened,
abrasion-resistant product with a nominal hardness level of 500
HBW.This product is ideal for applications where a good combination
of abrasion resistance, formability, andweldability is desired.
AR500F is produced by austenitizing, water quenching, and
tempering.
ApplicationsAR500F abrasion-resistant plate is used in equipment
subjected to abrasive wear. Common applicationsfor AR500F
abrasion-resistant plate include mining and raw material handling,
recycling, and constructionequipment where AR500F may be employed
in hoppers, chutes, crushers, conveyors, screens, shovelsand
buckets, cutting edges, truck dump bodies, and other components
exposed to abrasive wear
Dimensions AvailableThickness: 0.250 - 1.250 (6.4 31.8 mm)Width:
72- 102 (1,830mm 2,590 mm)Maximum Length: 600 (15.24 m)
Standard pattern sizes, 96 wide x 288 long (2.44 m x 7.32 m) are
available in thicknesses of , 3/8,, 1, and 1-1/4 (6.4, 9.5, 12.7,
19.0, 24.5, and 31.8 mm) Please inquire for other sizes.
Mechanical PropertiesAR500F has a nominal hardness of 500
HBW.
Hardness, HBWMinimum
Hardness, HBWMaximum
457 543
AR500F typical transverse tensile properties (standard
plate-type tensile specimen per ASTM A370) andtypical Charpy
V-notch impact toughness for [19 mm] thick plate:0.2% Yield
Strength, ksi [MPa],Typical
Tensile Strength,ksi [MPa],
Typical
Elongation, %,in 2 [50mm],
Typical
TypicalLongitudinal CVNEnergy at -40 F[-40 C], ft-lbf [J]
TypicalTransverse CVNEnergy at -40 F[-40 C], ft-lbf [J]
175 [1,200] 225 [1,550] 20% 20 [27] 15 [20]
Chemical Composition (ladle analysis, wt. %, max. except
wherenoted)Plate Thickness,
t, (in)C Mn P S Si Ni Cr Mo B
Min.CEV
TypicalCET
Typical
t 0.787 0.27 1.60 0.025 0.010 0.70 0.30 1.00 0.25 0.0005 0.52
0.370.787 < t 1.25 0.29 1.60 0.025 0.010 0.70 0.30 1.00 0.25
0.0005 0.63 0.43
