01 General

GOLDEN ISLAND APARTMENT

Phu Huu Ward, Dist.9, HCMC

Electrical & Mechanical Specification

Part A: General Requirements

Revision Date Approved by

001 Aug 2011 NVL

VHT Engineering 158 Bau Cat 3 street, Tan Binh Dist., HCMC Telephone: (84) 8 89492076 Fax: (84) 8 89492075

TABLE OF CONTENTS

VHT Engineering 2 Aug-11

Contents

0117 APPLIED STANDARDS ............................................................................................................................. 4

0171 GENERAL REQUIREMENTS ................................................................................................................ 30 1 GENERAL ................................................................................................................................................... 30

1.1 Precedence ........................................................................................................................................ 30 1.2 Cross references ................................................................................................................................ 30 1.3 Referenced documents ....................................................................................................................... 30 1.4 Interpretation .................................................................................................................................... 31 1.5 Contract documents .......................................................................................................................... 33 1.6 Performance ...................................................................................................................................... 33 1.7 Notice ................................................................................................................................................ 33 1.8 Submissions ....................................................................................................................................... 34 1.9 DESIGN ............................................................................................................................................ 36

2 PRODUCTS ................................................................................................................................................. 36 2.1 GENERAL ......................................................................................................................................... 36 2.2 Tests .................................................................................................................................................. 37 2.3 Materials and components ................................................................................................................ 37

3 EXECUTION ................................................................................................................................................ 38 3.1 Wall chasing ...................................................................................................................................... 38 3.2 Fixing ................................................................................................................................................ 38 3.3 Completion ........................................................................................................................................ 38 3.4 Record drawings ............................................................................................................................... 39 3.5 Operation and maintenance manuals ................................................................................................ 39 3.6 Cleaning ............................................................................................................................................ 41 3.7 Post-construction mandatory inspections and maintenance ............................................................. 41

181 ADHESIVES, SEALANTS AND FASTENERS ........................................................................................ 43 1 GENERAL ................................................................................................................................................... 43

1.1 Cross references ................................................................................................................................ 43 1.2 Submissions ....................................................................................................................................... 43 1.3 Inspection .......................................................................................................................................... 43 1.4 Performance ...................................................................................................................................... 43

2 PRODUCTS ................................................................................................................................................. 44 2.1 Adhesives ........................................................................................................................................... 44 2.2 Sealants ............................................................................................................................................. 44 2.3 Fasteners ........................................................................................................................................... 45

0182 FIRE-STOPPING ...................................................................................................................................... 52 1 GENERAL ................................................................................................................................................... 52

1.1 Cross references ................................................................................................................................ 52 1.2 General standards ............................................................................................................................. 52 1.3 Inspection .......................................................................................................................................... 52 1.4 Tests .................................................................................................................................................. 52 1.5 Samples ............................................................................................................................................. 52 1.6 Submissions ....................................................................................................................................... 52

PHYSICAL PERFORMANCE: SUBMIT REPORT TO AS 4072.1 APPENDIX C. ................................... 53 1 PRODUCTS ................................................................................................................................................. 53

1.1 Materials ........................................................................................................................................... 53 1.2 Components ....................................................................................................................................... 54

2 EXECUTION ................................................................................................................................................ 54 2.1 Execution generally ........................................................................................................................... 54 2.2 Systems .............................................................................................................................................. 55 2.3 Completion submissions .................................................................................................................... 56 2.4 Maintenance ...................................................................................................................................... 56

0183 METALS AND PREFINISHES ................................................................................................................ 57 1 GENERAL ................................................................................................................................................... 57

TABLE OF CONTENTS


1.1 Cross references ................................................................................................................................ 57 2 PRODUCTS ................................................................................................................................................. 57

2.1 Metals ................................................................................................................................................ 57 3 EXECUTION ................................................................................................................................................ 58

3.1 General.............................................................................................................................................. 58 3.2 Self finishing ...................................................................................................................................... 59 3.3 Electroplating .................................................................................................................................... 59 3.4 Anodising .......................................................................................................................................... 59 3.5 Metal spraying .................................................................................................................................. 59 3.6 Powder coating ................................................................................................................................. 60

THERMOSET POWDER COATING GENERALLY ...................................................................................................... 60 3.7 Prepainting ........................................................................................................................................ 61 3.8 Completion ........................................................................................................................................ 62

0186 BUILDING IT COMPONENTS ............................................................................................................... 63 1 GENERAL ................................................................................................................................................... 63

1.1 Aims ................................................................................................................................................... 63 1.2 Cross references ................................................................................................................................ 63 1.3 Submissions ....................................................................................................................................... 63

2 PRODUCTS ................................................................................................................................................. 63 2.1 Active computer hardware ................................................................................................................ 63 2.2 Software ............................................................................................................................................ 64

3 EXECUTION ................................................................................................................................................ 65 3.1 Installation ........................................................................................................................................ 65 3.2 Completion ........................................................................................................................................ 65

0223 SERVICE TRENCHING .......................................................................................................................... 66 1 GENERAL ................................................................................................................................................... 66

1.1 Cross references ................................................................................................................................ 66 1.2 Design ............................................................................................................................................... 66 1.3 Inspection .......................................................................................................................................... 66 1.4 Tests .................................................................................................................................................. 66 1.5 Submissions ....................................................................................................................................... 66

2 EXECUTION ................................................................................................................................................ 67 2.1 Excavating ......................................................................................................................................... 67 2.2 Boring ............................................................................................................................................... 67 2.3 Backfilling ......................................................................................................................................... 68 2.4 Reinstatement of surfaces .................................................................................................................. 68

GENERRAL GOLDEN ISLAND Project


0117 APPLIED STANDARDS

Viet Nam

11TCN 19-84 Elec.Line - B in Lc VN 11TCN 21-84 Power station -B in Lc VN 11TCN 20-84 Protection - B in Lc VN TCVN 2622:1995 Fire fighting for building TCVN 6160:1996 Fire fighting for highrise Building TCVN 5040:1980 Fire Fighting Equipment TCVN 5760:1993 Fire Fighting system-Require for design, installation and use TCXD 95:1983 Exterior Lighting TCXD 25:1991 Elec.Wiring TCXD 27:1991 Elec. Installation TCXD 46:1991 Lightning Protection

Australian

AS/NZS CISPR15 2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 12:2000, MOD)

AS 150 1980 Road tars for pavements AS ISO 354 2006 Acoustics - Measurement of sound absorption in a reverberation room AS/NZS ISO 717 Acoustics - Rating of sound insulation in buildings and of building elements AS/NZS ISO 717.1 2004 Airborne sound insulation AS ISO 717.2 2004 Impact sound insulation AS 1012 Methods of testing concrete AS 1012.1 1993 Sampling of fresh concrete AS 1012.2 1994 Preparation of concrete mixes in the laboratory AS 1012.3.1 1998 Determination of properties related to the consistency of concrete - Slump test AS 1012.3.3 1998 Determination of properties related to the consistency of concrete - Vebe test AS 1012.3.4 1998 Determination of properties related to the consistency of concrete - Compactibility

index AS 1012.4.2 1999 Determination of air content of freshly mixed concrete - Measuring reduction in air

pressure in chamber above concrete AS 1012.5 1999 Determination of mass per unit volume of freshly mixed concrete AS 1012.8.1 2000 Method for making and curing concrete - Compression and indirect tensile test

specimens AS 1012.8.2 2000 Method for making and curing concrete - Flexure test specimens AS 1012.9 1999 Determination of the compressive strength of concrete specimens AS 1012.10 2000 Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting

test) AS 1012.11 2000 Determination of the modulus of rupture AS 1012.12.2 1998 Determination of mass per unit volume of hardened concrete - Water displacement

method AS 1012.13 1992 Determination of the drying shrinkage of concrete for samples prepared in the field

or in the laboratory AS 1012.14 1991 Method for securing and testing cores from hardened concrete for compressive

strength AS 1055 Acoustics - Description and measurement of environment noise AS 1055.1 1997 General procedures AS 1074 1989 Steel tubes and tubulars for ordinary service AS/NZS 1080 Timber - Methods of test AS/NZS 1080.1 1997 Moisture content AS 1085 Railway track material AS 1085.1 2002 Steel rails AS 1100 Technical drawing AS 1100.101 1992 General principles AS 1100.201 1992 Mechanical engineering drawing AS 1100.301 1985 Architectural drawing AS 1100.401 1984 Engineering survey and engineering survey design drawing AS/NZS 1100.501 2002 Structural engineering drawing



AS 1102 Graphical symbols for electrotechnical documentation AS 1102.101 1989 General information and general index AS 1102.102 1997 Symbol elements, qualifying symbols and other symbols having general application AS 1102.103 1997 Conductors and connecting devices AS 1102.106 1997 Production and conversion of electrical energy AS 1102.107 1997 Switchgear, controlgear and protective devices AS 1102.108 1997 Measuring instruments, lamps and signalling devices AS 1102.111 1997 Architectural and topographical installation plans and diagrams AS 1110 ISO metric hexagon bolts and screws - Product grades A and B AS 1110.1 2000 Bolts AS 1110.2 2000 Screws AS 1111 ISO metric hexagon bolts and screws - Product grade C AS 1111.1 2000 Bolts AS 1111.2 2000 Screws AS 1112 ISO metric hexagon nuts AS 1112.1 2000 Style 1 - Product grades A and B AS 1112.2 2000 Style 2 - Product grades A and B AS 1112.3 2000 Product grade C AS 1112.4 2000 Chamfered thin nuts - Product grades A and B AS 1141 Methods for sampling and testing aggregates AS 1141.0 1999 List of methods AS 1141.4 2000 Bulk density of aggregate AS 1141.6.1 2000 Particle density and water absorption of coarse aggregate - Weighing-in-water

method AS 1141.6.2 1996 Particle density and water absorption of coarse aggregate - Prycnometer AS 1141.11 1996 Particle size distribution by sieving AS 1141.12 1996 Materials finer than 75 m in aggregates (by washing) AS 1141.13 2007 Material finer than 2m AS 1141.14 1995 Particle shape, by proportional calliper AS 1141.15 1999 Flakiness index AS 1141.18 1996 Crushed particles in coarse aggregate derived from gravel AS 1141.21 1997 Aggregate crushing value AS 1141.22 1996 Wet/dry strength variation AS 1141.23 1995 Los Angeles value AS 1141.24 1997 Aggregate soundness - Evaluation by exposure to sodium sulfate solution AS 1141.25.1 2003 Degradation factor - Source rock AS 1141.25.2 203 Degradation factor - Coarse aggregate AS 1141.25.3 2003 Degradation factor - Fine aggregate AS 1141.32 1995 Weak particles (including clay lumps, soft and friable particles) in coarse aggregates AS 1141.37 1995 Iron unsoundness AS 1141.42 1999 Pendulum friction test AS 1141.50 1998 Resistance to stripping of cover aggregates from binders AS 1141.51 1996 Unconfined compressive strength of compacted materials AS 1141.6.1 2000 Particle density and water absorption of coarse aggregate - Weighing-in-water

method AS 1141.6.2 1996 Particle density and water absorption of coarse aggregate Prycnometer AS/NZS 1148 2001 Timber - Nomenclature - Australian, New Zealand and imported species AS 1152 1993 Specification for test sieves AS/NZS 1158 Lighting for roads and public spaces AS/NZS 1158.0 2005 Road lighting Introduction AS/NZS 1158.1.1 2005 Road lighting - Vehicular traffic (Category V) lighting - Performance and installation

design requirements AS/NZS 1158.1.3 1997 Road lighting - Vehicular traffic (Category V) lighting - Guide to design, installation,

operation and maintenance AS 1158.2 2005 The lighting of urban roads and other public thoroughfares - Computer procedures

for the calculation of light technical parameters for category A lighting AS/NZS 1158.3.1 2005 Pedestrian area (Category P) lighting - Performance and installation design

requirements AS 1158.4 1987 The lighting of urban roads and other public thoroughfares - Supplementary lighting

at pedestrian crossings AS/NZS 1158.6 2004 Luminaires AS 1160 1996 Bitumen emulsions for construction and maintenance of pavements AS 1163 1991 Structural steel hollow sections AS/NZS 1167 Welding and brazing - Filler metals



AS/NZS 1167.1 2005 Filler metal for brazing and braze welding AS/NZS 1170 Structural design actions AS/NZS 1170.0 2002 General principles AS/NZS 1170.1 2002 Permanent, imposed and other actions AS/NZS 1170.2 2002 Wind actions AS 1170.4 1993 Minimum design loads on structures Earthquake loads AS 1181 1982 Method of measurement of civil engineering works and associated building works AS 1191 2002 Acoustics - Method for laboratory measurement of airborne sound insulation of building

elements AS 1192 2004 Electroplated coatings - Nickel and chromium AS 1210 1997 Pressure vessels AS 1214 1983 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1221 1997 Fire hose reels AS 1228 2006 Pressure equipment - Boilers AS/NZS 1229 2002 Laundry troughs and tubs AS 1231 2000 Aluminium and aluminium alloys - Anodic oxidation coatings AS 1237 Plain washers for metric bolts, screws and nuts for general purposes AS 1237.1 2002 General plan AS/NZS 1252 1996 High strength steel bolts with associated nuts and washers for structural engineering AS/NZS 1254 2002 PVC (UPVC) pipes and fittings for storm and surface water applications AS/NZS 1260 2002 PVC-U pipes and fittings for drain, waste and vent application AS 1271 2003 Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired

pressure vessels AS 1272 1974 Unsintered PTFE tape for thread sealing applications AS 1273 1991 Unplasticized PVC (UPVC) downpipe and fittings for rainwater AS/NZS 1276 Acoustics - Rating of sound insulation in buildings and of building elements AS/NZS 1276.1 1999 Airborne sound insulation AS 1277 1983 Acoustics - Measurement procedures for ducted silencers AS 1281 2001 Cement mortar lining of steel pipes and fittings AS 1284 Electricity metering AS 1284.1 2004 General purpose induction watthour meters AS 1284.4 2006 Socket mounting system AS 1288 2006 Glass in buildings - Selection and installation AS 1289 Methods of testing soils for engineering purposes AS 1289.2.1.1 2005 Soil moisture content tests - Determination of the moisture content of a soil - Oven

drying method (standard method) AS 1289.3.1.1 1995 Soil classification tests - Determination of the liquid limit of a soil - Four point

Casagrande method AS 1289.3.2.1 1995 Soil classification tests - Determination of the plastic limit of a soil - Standard

method AS 1289.3.3.1 1995 Soil classification tests - Calculation of the plasticity index of a soil AS 1289.3.6.1 1995 Soil classification tests - Determination of the particle size distribution of a soil -

Standard method of analysis by sieving AS 1289.3.6.3 2003 Determination of particle size distribution of a soil - Standard method of fine analysis

using a hydrometer AS 1289.3.7.1 2002 Soil classification tests - Determination of the sand equivalent of a soil using a

power-operated shaker AS 1289.4.2.1 1997 Determination of the sulfate content of a natural soil and the sulfate content of the

groundwater - Normal method AS 1289.4.3.1 1997 Determination of the pH value of a soil - Electrometric method AS 1289.4.4.1 1997 Determination of the electrical resistivity of a soil - Method for sands and granular

materials AS 1289.5.1.1 2003 Soil compaction and density tests- Determination of dry density/moisture content

relation of a soil using standard compactive effort AS 1289.5.2.1 2003 Soil compaction and density tests- Determination of dry density/moisture content

relation of a soil using modified compactive effort AS 1289.5.3.1 2004 Sand replacement method using a sand-cone pouring apparatus AS 1289.5.3.2 2004 Sand replacement method using a sand pouring can, with or without a volume

displacer AS 1289.5.4.1 2007 Soil compaction and density tests - Compaction control test - Dry density ratio,

moisture variation and moisture ratio AS 1289.5.4.2 1993 Methods of testing soils for engineering purposes AS 1289.5.5.1 1998 Soil compaction and density tests - Determination of the minimum and maximum

dry density of a cohesionless material - Standard method



AS 1289.5.6.1 1998 Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material

AS 1289.5.7.1 2006 Soil compaction and density tests- Compaction control test - Hilf density ratio and Hilf moisture variation

AS 1289.5.8.1 2007 Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode

AS 1289.6.1.1 1998 Soil strength and consolidation tests- Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen

AS 1289.6.1.2 1998 Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for an undisturbed specimen

AS/NZS 1301 Methods of test for pulp and paper AS 1301 419s 2004 Water vapour transmission rate of paper AS 1316 2003 Masonry cement AS 1319 1994 Safety signs for the occupational environment AS 1324 Air filters for use in general ventilation and airconditioning AS 1324.1 2001 Application, performance and construction AS 1324.2 2003 Methods of test AS/NZS 1328 Glued laminated structural timber AS/NZS 1328.1 1998 Performance requirements and minimum production requirements AS 1345 1995 Identification of the contents of pipes, conduits and ducts AS 1348 2002 Roads and traffic engineering - Glossary of terms AS 1349 1986 Bourdon tube pressure and vacuum gauges AS 1359 Rotating electrical machines-General requirements AS 1359.0 1998 Introduction and list of Parts AS 1359.5 2004 Three-phase cage induction motors - High efficiency and minimum energy -

performance standards requirements AS 1359.30 1997 Preferred outputs and frame sizes AS 1359.31 1997 Three-phase induction motors - Operation on unbalanced voltages AS 1359.101 1997 Rating and performance AS 1359.102.1 1997 Methods for determining losses and efficiency - General AS 1359.102.2 1997 Methods for determining losses and efficiency - Calorimetric method AS 1359.106 1996 Methods of cooling (IC Code) AS 1359.107 1996 Classification of types of construction and mounting arrangements (IM Code) AS 1359.109 1998 Noise limits AS 1359.114 1997 Vibration measurement and limits AS 1366 Rigid cellular plastics sheets for thermal insulation AS 1366.1 1992 Rigid cellular polyurethane (RC/PUR) AS 1366.2 1992 Rigid cellular polyisocyanurate (RC/PIR) AS 1366.3 1992 Rigid cellular polystyrene - Moulded (RC/PS - M) AS 1366.4 1989 Rigid cellular plastics sheets for thermal insulation Rigid cellular polystyrene -

Extruded (RC/PS-E) AS/NZS 1367 2000 Coaxial cable systems for the distribution of analogue television and sound signals in

single and multiple unit installations AS 1375 1985 Industrial fuel-fired appliances (known as the SAA Industrial Fuel-fired Appliances

Code) AS 1379 1997 Specification and supply of concrete AS 1385 1985 Textile floor coverings - Metric units and commercial tolerances for measurement AS/NZS 1390 1997 Cup head bolts with ISO metric coarse pitch threads AS/NZS 1393 1996 Coach screws - Metric series with ISO hexagon heads AS 1397 2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated AS 1417 Receiving antennas for radio and television in the frequency range 30 MHz to 1 GHz AS 1417.1 1987 Construction and installation AS 1420 2001 ISO metric hexagon socket head cap screws AS/NZS 1421 1996 ISO metric hexagon socket set screws AS/NZS 1427 1996 ISO metric machine screws AS 1428 Design for access and mobility AS 1428.1 2001 General requirements for access - New building work AS 1428.2 1992 Enhanced and additional requirements - Buildings and facilities AS 1428.3 1992 Requirements for children and adolescents with physical disabilities AS/NZS 1428.4 2002 Tactile indicators AS 1432 2004 Copper tubes for plumbing, gasfitting and drainage applications AS 1443 2004 Carbon steels and carbon-manganese steel - Cold-finished bars AS 1444 1996 Wrought alloy steels - Standard , hardenability (H) series and hardened and tempered

to designated mechanical properties



AS 1445 1986 Hot-dipped zinc-coated or aluminium/zinc-coated sheet - 76 mm pitch corrugated AS 1450 1983 Steel tubes for mechanical purposes AS 1470 1986 Health and safety at work - Principles and practices AS/NZS 1477 2006 PVC pipes and fittings for pressure applications AS 1478 Chemical admixtures for concrete, mortar and grout AS 1478.1 2000 Admixtures for concrete AS 1530 Methods for fire tests on building materials, components and structures AS 1530.1 1994 Combustibility test for materials AS 1530.2 1993 Test for flammability of materials AS/NZS 1530.3 1999 Simultaneous determination of ignitability, flame propagation, heat release and

smoke release AS 1530.4 2005 Fire-resistance tests of elements of building construction AS/NZS 1546 On-site domestic wastewater treatment units AS/NZS 1546.1 1998 Septic tanks AS/NZS 1546.2 2001 Waterless composting toilets AS/NZS 1547 2000 On-site domestic wastewater management AS 1548 1995 Steel plates for pressure equipment AS/NZS 1554 Structural steel welding AS/NZS 1554.1 2004 Welding of steel structures AS/NZS 1554.3 2002 Welding of reinforcing steel AS/NZS 1554.6 1994 Welding stainless steels for structural purposes AS 1562 Design and installation of sheet roof and wall cladding AS 1562.1 1992 Metal AS/NZS 1562.2 1999 Corrugated fibre-reinforced cement AS 1562.3 2006 Plastic AS 1565 1996 Copper and copper alloys - Ingots and castings AS 1566 1997 Copper and copper alloys - Rolled flat products AS/NZS 1567 1997 Copper and copper alloys-Wrought rods, bars and sections AS 1569 1998 Copper and copper alloys - Seamless tubes for heat exchangers AS/NZS 1571 1995 Copper - Seamless tubes for airconditioning and refrigeration AS 1572 1998 Copper and copper alloys - Seamless tubes for engineering purposes AS 1579 2001 Arc welded steel pipes and fittings for water and waste water AS 1580 Paints and related materials - Methods of test AS/NZS 1580.107.3 1997 Determination of wet film thickness by gauge AS/NZS 1580.108.2 2004 Dry film thickness - Paint inspection gauge AS/NZS 1580.481.1.2 1998 Coatings - Exposed to weathering - Discolouration (including bronzing) AS/NZS 1580.602.2 1995 Measurement of specular gloss of non-metallic paint films at 20 degrees, 60

degrees and 85 degrees (ISO 2813:1994) AS 1589 2001 Copper and copper alloy waste fittings AS/NZS 1594 2002 Hot-rolled steel flat products AS/NZS 1595 1998 Cold-rolled, unalloyed, steel sheet and strip AS/NZS 1596 2002 Storage and handling of LP Gas AS 1597 Precast reinforced concrete box culverts AS 1597.2 1996 Large culverts (from 1500 mm span and up to and including 4200 mm span and

4200 mm height) AS 1599 2006 Pressure-sensitive and water activated adhesive tape for packaging and office

applications AS 1603 Automatic fire detection and alarm systems AS 1603.2 1997 Point type smoke detectors AS 1603.3 1996 Heat alarms AS 1603.5 1996 Manual call points AS 1603.7 1996 Optical beam smoke detectors AS 1603.8 1996 Multi-point aspirated smoke detectors AS 1603.11 2001 Visual warning devices AS 1603.13 1998 Duct sampling units AS 1603.15 2002 Remote indicators AS 1603.16 2002 In situ testers AS/NZS 1604 Specification for preservative treatment AS 1604.1 2005 Sawn and round timber AS/NZS 1604.2 2004 Reconstituted wood-based products AS/NZS 1604.3 2004 Plywood AS/NZS 1604.4 2004 Specification for preservative treatment Laminated veneer lumber (LVL) AS/NZS 1604.5 2005 Specification for preservative treatment Glued laminated timber products AS 1627 Metal finishing - Preparation and pretreatment of surfaces



AS 1627.1 2003 Removal of oil, grease and related contaimination AS 1627.2 2002 Power tool cleaning AS 1627.4 2005 Abrasive blast cleaning AS 1627.5 2003 Pickling AS 1627.9 2002 Pictorial surface preparation standards for painting steel surfaces AS 1628 1999 Water supply - Metallic gate, globe and non-return valves AS 1631 1994 Cast grey and ductile iron non-pressure pipes and fittings AS 1646 various Elastomeric seals for waterworks purposes AS 1657 1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation AS/NZS 1664 Aluminium structures AS/NZS 1664.1 1997 Limit state design AS/NZS 1664.2 1997 Allowable stress design AS 1665 2004 Welding of aluminium structures AS/NZS 1668 The use of ventilation and airconditioning in buildings AS/NZS 1668.1 1998 Fire and smoke control in multi-compartment buildings AS 1668.2 1991 Mechanical ventilation for acceptable indoor quality AS 1668.2 2002 Ventilation design for indoor air contaminant control AS 1668.3 2001 Smoke control systems for large single compartments or smoke reservoirs AS 1670 Fire detection, warning control and intercom systems - System design, installation and

commissioning AS 1670.1 2004 Fire AS 1670.3 2004 Fire alarm monitoring AS 1670.4 2004 Sound systems and intercom systems for emergency purposes AS 1670.6 1997 Smoke alarms AS 1672 Limes and limestones AS 1672.1 1997 Limes for building AS/NZS 1677 Refrigerating systems AS/NZS 1677.1 1998 Refrigerant classification AS/NZS 1677.2 1998 Safety requirements for fixed applications AS/NZS 1680 Interior lighting AS/NZS 1680.0 1998 Safe movement AS/NZS 1680.1 2006 General principles and recommendations AS 1680.2.1 1993 Circulation spaces and other general areas AS 1680.2.2 1994 Office and screen-based tasks AS 1680.2.3 1994 Educational and training facilities AS/NZS 1680.2.4 1997 Industrial tasks and processes AS 1680.2.5 1997 Hospital and medical tasks AS 1680.3 1991 Measurement, calculation and presentation of photometric data. AS 1682 Fire dampers AS 1682.1 1990 Specification AS 1682.2 1990 Installation AS 1683 Methods of test for elastomers AS 1683.23 2000 Rubber - Vulcanized - Determination of resistance to liquids AS 1684 Residential timber-framed construction AS 1684.2 2006 Non-cyclonic areas AS 1684.3 2006 Cyclonic areas AS 1684.4 2006 Simplified - Non-cyclonic areas AS 1692 2006 Steel tanks for flammable and combustible liquids AS 1697 2005 Installation and maintenance of steel pipe systems for gas AS 1710 2007 Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate - Test

methods and quality classification AS/NZS 1715 1994 Selection, use and maintenance of respiratory protective devices AS 1720 Timber structures AS 1720.1 1997 Design methods AS 1720.2 2006 Timber properties AS 1720.4 2006 Fire-resistance for structural adequacy of timber members AS 1722 Pipe threads of Whitworth form AS 1722.1 1975 Sealing pipe threads AS 1725 2003 Galvanized rail-less chain-link security fencing and gates AS 1726 1993 Geotechnical site investigations AS/NZS 1730 1996 Washbasins AS/NZS 1734 1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate AS 1735 Lifts, escalators and moving walks AS 1735.1 2003 General requirements



AS 1735.2 2001 Passenger and goods lifts Electric AS 1735.5 2003 Escalators and moving walks (BS EN 115:1995, MOD) AS 1735.11 1986 Fire-rated landing doors AS 1735.12 1999 Facilities for persons with disabilities AS 1741 1991 Vitrified clay pipes and fittings with flexible joints - Sewer quality AS 1742 Various Manual of uniform traffic control devices AS 1742.2 1994 Traffic control devices for general use AS 1742.3 2002 Traffic control devices for works on roads AS 1742.14 1996 Traffic signals AS 1743 2001 Road signs - Specifications AS 1744 1975 Forms of letters and numerals for road signs (known as Standard alphabets for road

signs) AS/NZS 1748 2006 Timber - Stress-graded - Product requirements for mechanically stress-graded timber AS 1761 1985 Helical lock-seam corrugated steel pipes AS 1762 1984 Helical lock-seam corrugated steel pipe - Design and installation AS/NZS 1768 2007 Lightning protection AS 1769 1975 Welded stainless steel tubes for plumbing applications AS 1789 2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) AS 1796 2001 Certification of welders and welding supervisors AS 1798 1992 Lighting poles and bracket arms-Preferred dimensions AS/NZS 1801 1997 Occupational protective helmets AS 1804 1976 Soft lead sheet and strip AS 1807 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of

test AS 1807.6 2000 Determination of integrity of termination mounted HEPA filter installations AS 1810 1995 Timber - Seasoned cypress pine - Milled products AS 1830 2007 Grey cast iron AS 1831 2007 Ductile cast iron AS 1841 Portable fire extinguishers AS/NZS 1841.1 1997 General requirements AS/NZS 1841.2 1997 Specific requirements for water type extinguishers AS/NZS 1841.3 1997 Special requirements for wet-chemical type extinguishers AS/NZS 1841.4 1997 Specific requirements for foam type extinguishers AS/NZS 1841.5 1997 Special requirements for powder type extinguishers AS/NZS 1841.6 1997 Specific requirements for carbon dioxide type extinguishers AS/NZS 1841.8 1997 Specific requirements for non-rechargeable type extinguishers AS 1851 2005 Maintenance of fire protection systems and equipment AS/NZS 1859 Reconstituted wood-based panels Specifications AS/NZS 1859.1 2004 Particleboard AS/NZS 1859.2 2004 Dry-processed fibreboard AS/NZS 1859.3 2005 Decorative overlaid wood panels AS/NZS 1859.4 2004 Wet-processed fibreboard AS 1860 Installation of particleboard flooring AS/NZS 1860.1 2002 Specifications AS 1860.2 2006 Installation AS/NZS 1865 1997 Aluminium and aluminium alloys - Drawn wire, rod, bar and strip AS/NZS 1866 1997 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes AS/NZS 1867 1997 Aluminium and aluminium alloys - Drawn tubes AS/NZS 1873 Powder-actuated (PA) hand-held fastening tools AS/NZS 1873.4 2003 Fasteners AS 1874 2000 Aluminium and aluminium alloys - ingots and castings AS 1882 2002 Earth and bonding clamps AS 1891 Industrial fall-arrest systems and devices AS 1891.4 2000 Selection, use and maintenance AS/NZS 1892 Portable ladders AS/NZS 1892.1 1996 Metal AS 1897 1976 Electroplated coatings on threaded components (metric coarse series) AS 1905 Components for the protection of openings in fire-resistant walls AS 1905.1 2005 Fire-resistant doorsets AS 1905.2 2005 Fire-resistant roller shutters AS 1906 Retroreflective materials and devices for road traffic control purposes AS/NZS 1906.1 2007 Retroreflective sheeting AS/NZS 1906.2 2007 Retroreflective devices (non-pavement application) AS 1906.3 1992 Raised pavement markers (retroreflective and non-retroreflective



AS 1910 2004 Water supply - Float control valves for use in hot and cold water AS 1926 Swimming pool safety AS 1926.1 2007 Safety barriers for swimming pools AS 1926.2 2007 Location of safety barriers for swimming pools AS 1926.3 2003 Water recirculation and filtration systems AS 1940 2004 The storage and handling of flammable and combustible liquids AS 2001 Methods of test for textiles AS 2001.2.14 1987 Physical tests - Determination of twist in yarns AS 2001.2.23 1990 Physical tests - Determination of linear density of textile yarn from packages AS 2001.3.4 1995 Chemical tests - Determination of solvent extractable matter AS 2001.4.16 1981 Colourfastness tests - Determination of colourfastness to dry cleaning solvents AS 2001.4.21 2006 Colourfastness tests - Determination of colourfastness to light using an artificial light

source (mercury vapour, tungsten filament, internally phosphor-coated lamp) AS 2001.4.E01 2001 Colourfastness tests - Colourfastness to water AS 2001.6.1 1980 Miscellaneous tests - Determination of the resistance of textiles to certain insect

pests AS 2001.7 2005 Methods of test for textiles. AS 2008 1997 Residual bitumen for pavements AS/NZS 2009 2006 Glass beads for pavement-marking materials AS/NZS 2022 2003 Anhydrous ammonia - Storage and handling AS/NZS 2023 1995 Baths for ablutionary purposes AS/NZS 2032 2006 Code of practice for installation of UPVC pipe systems AS 2033 1980 Installation of polyethylene pipe systems AS/NZS 2041 1998 Buried corrugated metal structures AS 2047 1999 Windows in buildings - Selection and installation AS 2049 2002 Roof tiles AS 2050 2002 Installation of roof tiles AS/NZS 2053 Conduits and fittings for electrical installations AS/NZS 2053.1 2001 General requirements AS/NZS 2053.2 2001 Rigid plain conduits and fittings of insulating material AS/NZS 2053.3 1995 Rigid plain conduits and fittings of fibre-reinforced concrete material AS/NZS 2053.4 1995 To be read in conjunction with AS/NZS 2053.1. AS/NZS 2053.5 2001 Corrugated conduits and fittings of insulating material AS/NZS 2053.6 2001 Profile-wall, smooth-bore conduits and fittings of insulating material AS/NZS 2053.7 2002 Rigid metal conduits and fittings AS/NZS 2053.8 1995 Flexible conduits and fittings of metal or composite material AS 2070 1999 Plastics materials for food contact use AS 2074 2003 Cast steels AS 2082 2000 Timber - Hardwood - Visually stress-graded for structural purposes AS/NZS 2098 Methods of test for veneer and plywood AS/NZS 2098.11 2005 Determination of formaldehyde emissions for plywood AS/NZS 2107 2000 Acoustics - Recommended design sound levels and reverberation times for building

interiors AS/NZS 2111 Textile floor coverings - Tests and measurements AS/NZS 2111.3 1996 Determination of mass per unit area AS/NZS 2111.4 1996 Determination of surface pile mass above the substrate AS/NZS 2111.9 1996 Determination of the number of tufts per unit length and per unit area AS/NZS 2111.11 1996 Determination of total pile mass per unit area by complete dissection of textile floor

coverings AS/NZS 2111.15 1996 Determination of withdrawal force required to remove tufts or pile from a textile floor

covering AS/NZS 2111.16 1996 Determination of bond strength between backing components of a textile floor

covering AS/NZS 2111.18 1997 Burning behaviour - Tablet test at ambient temperature AS/NZS 2111.19.1 1996 Colourfastness tests - Rubbing AS/NZS 2111.19.2 1996 Colourfastness tests - Shampoo solution AS 2118 Automatic fire sprinkler systems AS 2118.1 2006 General requirements AS 2118.2 1995 Wall wetting sprinklers (Drenchers) AS 2118.3 1997 Deluge AS 2118.4 1995 Residential AS 2118.6 1995 Combined sprinkler and hydrant AS/NZS 2119 1997 Textile floor coverings - Machine-made - Sampling and cutting specimens for physical

tests



AS 2120 Medical suction equipment AS 2120.3 1992 Suction equipment powered from a vacuum or pressure source AS 2124 1992 General conditions of contract AS 2127 1992 Form of formal instrument of agreement AS 2129 2000 Flanges for pipes, valves and fittings AS 2143 1978 Industrial and commercial steel shelving (Obsolescent) AS 2150 2005 Hot mix asphalt AS 2156 Walking tracks AS 2156.1 2001 Classification and signage AS 2156.2 2001 Infrastructure design AS 2157 1997 Cutback bitumen AS 2159 1995 Piling - Design and installation AS/NZS 2179 Specifications for rainwater goods, accessories and fasteners AS/NZS 2179.1 1994 Metal shape or sheet rainwater goods, and metal accessories and fasteners AS 2184 1985 Low voltage switchgear and controlgear

Moulded-case circuit breakers for rated voltages up to and including 600 V a.c. and 250 V d.c.

AS 2187 Explosives - Storage, transport and use AS 2187.1 1998 Storage AS 2187.2 2006 Use of explosives AS 2200 2006 Design charts for water supply and sewerage AS/NZS 2201 Intruder alarm systems AS/NZS 2201.1 2007 Client's premises - Design, installation, commissioning and maintenance AS 2201.2 2004 Monitoring centres AS 2201.3 1991 Detection devices for internal use AS 2201.4 1990 Wire-free systems installed in client's premises AS 2201.5 1992 Alarm transmission systems AS/NZS 2208 1996 Safety glazing materials in buildings AS 2209 1994 Timber - Poles for overhead lines AS/NZS 2269 2004 Plywood Structural AS/NZS 2270 2006 Plywood and blockboard for interior use AS/NZS 2271 2004 Plywood and blockboard for exterior use AS 2273 1979 Steel library shelving (Obsolescent) AS/NZS 2280 2004 Ductile iron pressure pipes and fittings AS 2281 1993 Flexible cellular polyurethane for seat cushioning and bedding AS 2293 Emergency escape lighting and exit signs for buildings AS 2293.1 2005 System design, installation and operation AS/NZS 2293.2 1995 Inspection and maintenance AS 2293.3 2005 Emergency escape luminaires and exit signs AS/NZS 2310 2002 Glossary of paint and painting terms AS/NZS 2311 2000 Guide to the painting of buildings AS/NZS 2312 2002 Guide to the protection of structural steel against atmospheric corrosion by the use of

protective coatings AS 2325 1993 Tungsten filament lamps for general service - Performance requirements AS 2327 Composite structures AS 2327.1 2003 Simply supported beams AS 2329 1999 Mastic adhesives for fixing wallboards AS 2331 Methods of test for metallic and related coatings AS 2331.1.3 2001 Local thickness tests - Magnetic method AS 2334 1980 Steel nails - Metric series AS 2338 2004 Preferred dimensions of wrought metal products AS 2341 various Methods of testing bitumen and related roadmaking products AS/NZS 2343 1997 Bullet-resistant panels and elements AS 2350 Methods of testing portland and blended cements AS/NZS 2350.0 1999 General introduction and list of methods AS/NZS 2350.1 2006 Sampling AS 2350.2 2006 Chemical composition AS/NZS 2350.3 2006 Normal consistency AS/NZS 2350.4 2006 Setting time AS/NZS 2350.5 2006 Determination of soundness AS 2350.7 2006 Determination of temperature rise during hydration of portland and blended cements AS/NZS 2350.8 2006 Fineness index by air permeability method AS 2350.9 2006 Determination of residue on the 45 m sieve AS 2350.10 2006 Acid soluble calcium oxide content of blended cement



AS/NZS 2350.11 2006 Compressive strength AS 2350.12 2006 Preparation of a standard mortar and moulding of specimens AS 2350.13 2006 Determination of drying shrinkage of cement mortars AS 2350.14 2006 Length change of portland and blended cement mortars exposed to a sulfate

solution AS 2350.15 1995 Water-soluble chromate content of portland cement AS/NZS 2350.16 2006 Determination of air content of masonry cement AS/NZS 2350.17 2006 Determination of soundness of masonry cements AS/NZS 2350.18 2006 Determination of water retention of masonry cement AS 2358 1990 Adhesives - For fixing ceramic tiles AS 2381 Electrical equipment for explosive atmospheres-Selection, installation and maintenance AS 2381.6 1993 Increased safety e AS 2381.7 1989 Intrinsic safety i AS 2417 2001 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 AS 2419 Fire hydrant installations AS 2419.1 2005 System design, installation and commissioning AS 2419.2 1994 Fire hydrant valves AS 2419.3 1996 Fire brigade booster connections AS 2423 2002 Coated steel wire fencing products for terrestrial, aquatic and general use AS 2439 Perforated plastics drainage and effluent pipe and fittings AS 2439.1 1981 Perforated drainage pipe and associated fittings AS 2439.2 1983 Perforated effluent pipe and associated fittings for sewerage applications AS 2441 2005 Installation of fire hose reels AS 2444 2001 Portable fire extinguishers and fire blankets - Selection and location AS 2454 1993 Textile floor coverings - Terminology AS/NZS 2455 Textile floor coverings - Installation practice AS/NZS 2455.1 1995 General AS/NZS 2455.2 1996 Carpet tiles AS/NZS 2465 1999 Unified hexagon bolts, screws and nuts (UNC and UNF threads) AS 2507 1998 The storage and handling of agricultural and veterinary chemicals AS 2528 1982 Bolts, studbolts and nuts for flanges and other high and low temperature applications AS/NZS 2544 1995 Grey iron pressure fittings AS/NZS 2566 Buried flexible pipelines AS/NZS 2566.1 1998 Structural design AS/NZS 2566.2 2002 Installation AS 2568 1991 Medical gases - Purity of compressed medical breathing air AS 2578 Traffic signal controllers AS 2578.1 1983 Physical and electrical compatibility AS/NZS 2588 1998 Gypsum plasterboard AS/NZS 2589 Gypsum linings in residential and light commercial construction - Application and

finishing AS/NZS 2589.1 1997 Gypsum plasterboard AS/NZS 2589.2 1997 Fibre reinforced gypsum plaster AS 2601 2001 The demolition of structures AS 2625 Mechanical vibration - Evaluation of machine vibration by measurements on non-

rotating parts AS 2625.1 2003 General guidelines AS 2625.4 2003 Industrial machines with nominal power above 15 kW and nominal speeds between

120 r/min and 15 000 r/min when measured in situ. AS 2634 1983 Chemical plant equipment made from glass-fibre reinforced plastics (GRP) based on

thermosetting resins (Obsolescent) AS 2638 Sluice valves for water works purposes AS 2638.1 2002 Metal seated AS 2638.2 2002 Resilient seated AS/NZS 2648 Underground marking tape AS/NZS 2648.1 1995 Non-detectable tape AS 2657 1985 Powered rotary lawnmowers AS 2658 2003 LP Gas - Portable and mobile appliances AS 2663 Textiles - Fabrics for window furnishings AS 2663.1 1997 Uncoated fabrics AS 2663.2 1999 Coated curtain fabrics AS 2663.3 1999 Vertical and holland blinds AS 2665 2001 Smoke/heat venting systems- Design, installation and commissioning



AS 2676 Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings

AS 2676.1 1992 Vented cells AS 2687 1997 Textiles - Upholstery fabrics for domestic and commercial use (excluding face-coated

fabrics) AS 2688 1984 Timber doors (Obsolescent) AS/NZS 2699 Built-in components for masonry construction AS/NZS 2699.1 2000 Wall ties AS/NZS 2699.2 2000 Connectors and accessories AS/NZS 2699.3 2002 Lintels and shelf angles (durability requirements) AS 2700 1996 Colour standards for general purposes AS 2701 2001 Methods of sampling and testing mortar for masonry constructions AS/NZS 2712 2007 Solar and heat pump water heaters - Design and construction AS 2714 1993 The storage and handling of hazardous chemical materials - Class 5.2 substances

(organic peroxides) AS 2726 Chainsaws - Safety requirements AS 2726.2 2004 Chainsaws for tree service AS 2727 1997 Chainsaws - Guide to safe working practices AS/NZS 2728 2007 Prefinished/prepainted sheet metal products for interior/exterior building applications -

Performance requirements AS 2729 1994 Rolling bearings - Dynamic load ratings and rating life AS 2738 2000 Copper and copper alloys - Compositions and designations of refinery products,

wrought products, ingots and castings AS 2754 Adhesives for timber and timber products AS 2754.2 1991 Polymer emulsion adhesives AS 2758 Aggregates and rock for engineering purposes AS 2758.1 1998 Concrete aggregates AS 2758.2 1996 Aggregate for sprayed bituminous surfacing AS 2758.4 2000 Aggregate for gabion baskets and wire mattresses AS 2758.5 1996 Asphalt aggregates AS 2784 2002 Endless wedge belt and V-belt drives AS/NZS 2785 2000 Suspended ceilings - Design and installation AS 2796 Timber - Hardwood - Sawn and milled products AS 2796.1 1999 Product specification AS 2796.2 2006 Grade description AS 2796.3 1999 Timber for furniture components AS/NZS 2832 Cathodic protection of metals AS/NZS 2832.1 2004 Pipes and ables AS 2832.2 2003 Compact buried structures AS 2832.4 2006 Internal surfaces AS 2834 1995 Computer accommodation AS/NZS 2845 Water supply - Backflow prevention devices AS/NZS 2845.1 1998 Materials, design and performance requirements AS 2845.2 1996 Air gaps and break tanks AS 2845.3 1993 Field testing and maintenance AS 2848 Aluminium and aluminium alloys - Compositions and designations AS 2848.1 1998 Wrought products AS 2858 2004 Timber - Softwood - Visually graded for structural purposes AS/NZS 2865 2001 Safe working in a confined space AS 2867 1986 Farm structures - General requirements for structural design AS 2870 1996 Residential slabs and footings - Construction AS 2876 2000 Concrete kerbs and channels (gutters) - Manually or machine placed AS/NZS 2878 2000 Timber - Classification into strength groups AS 2887 1993 Plastic waste fittings AS 2890 Parking facilities AS 2890.1 2004 Off-street car parking AS 2890.3 1993 Bicycle parking facilities AS 2891 Methods of sampling and testing asphalt AS 2891.1 1986 Sampling of asphalt AS 2891.2.1 1995 Sample preparation - Mixing, quartering and conditioning of asphalt in the laboratory AS 2891.2.2 1995 Sample preparation - Compaction of asphalt test specimens using a gyratory

compactor AS/NZS 2891.3.1 1997 Bitumen content and aggregate grading - Reflux method AS/NZS 2891.3.3 1997 Bitumen content and aggregate grading - Pressure filter method



AS 2891.5 2004 Determination of stability and flow - Marshall procedure AS 2891.6 1993 Determination of stability by the modified Hubbard-Field procedure AS 2891.8 2005 Voids and density relationships for compacted asphalt mixes AS 2891.9.3 2005 Determination of bulk density of compacted asphalt - Mensuration method AS 2891.10 2005 Water and volatile oils content AS 2896 1998 Medical gas systems - Installation and testing of non-flammable medical gas pipeline

systems AS/NZS 2904 1995 Damp-proof courses and flashings AS/NZS 2908 Cellulose-cement products AS/NZS 2908.1 2000 Corrugated sheets AS/NZS 2908.2 2000 Flat sheets AS 2913 2000 Evaporative airconditioning equipment AS/NZS 2918 2001 Domestic solid fuel burning appliances - Installation AS/NZS 2924 High pressure decorative laminates - Sheets made from thermosetting resins AS/NZS 2924.1 1998 Classification and specifications AS 2927 2001 The storage and handling of liquefied chlorine gas AS 2941 2002 Fixed fire protection installations - Pumpset systems AS 2946 1991 Suspended ceilings, recessed luminaries and air diffusers - Interface requirements for

physical compatibility AS 2971 2002 Serially produced pressure vessels AS/NZS 3000 2007 Wiring rules AS/NZS 3002 2002 Electrical installations - Shows and carnivals AS/NZS 3003 2003 Electrical installations - Patient treatment areas of hospitals and medical and dental

practices and dialyzing locations AS/ANZ 3008 Electrical installations - Selection of cables AS/ANZ 3008.1.1 1998 Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian

installation conditions AS/ANZ 3009 1998 Electrical installations - Emergency power supplies in hospitals AS/NZS 3010 2005 Electrical installations - Generating set AS 3011 Electrical installations - Secondary batteries installed in buildings AS/NZS 3011.2 1992 Sealed cells AS/NZS 3013 2005 Electrical installations - Classification of the fire and mechanical performance of wiring

systems AS/NZS 3017 2001 Electrical installations - Testing and inspection guidelines AS/NZS 3080 2003 Telecommunications installations - Generic cabling for commercial premises (ISO/IEC

11801:2002, MOD) AS/NZS 3084 2003 Telecommunications installations - Telecommunications pathways and spaces for

commercial buildings AS/NZS 3085 Telecommunications installations - Administration of communications cabling systems AS/NZS 3085.1 2004 Basic requirements AS/NZS 3100 2002 Approval and test specification - General requirements for electrical equipment AS/NZS 3102 2002 Electric duct heaters AS/NZS 3105 2007 Approval and test specification - Electrical portable outlet devices AS 3111 1994 Approval and test specification for miniature overcurrent circuit-breakers AS/NZS 3112 2004 Approval and test specification - Plugs and socket-outlets AS/NZS 3123 2005 Approval and test specification - Plugs, socket-outlets and couplers for general industrial

application. AS/NZS 3131 2001 Approval and test specification - Plugs and socket-outlets for stationary appliances AS/NZS 3161 2005 Approval and test specification - Thermostats and energy regulators AS/NZS 3190 2002 Approval and test specification - Residual current devices (current-operated earth-

leakage devices) AS/NZS 3350 Safety of household and similar electrical appliances AS/NZS 3350.2.34 2001 Particular requirements - Motor-compressors AS/NZS 3350.2.40 2001 Particular requirements for electrical heat pumps, airconditioners and dehumidifiers AS/NZS 3350.2.78 1996 Particular requirements - Outdoor barbecues AS/NZS 3439 Low-voltage switchgear and controlgear assemblies AS/NZS 3439.1 2002 Type-tested and partially type-tested assemblies AS/NZS 3439.2 2002 Particular requirements for busbar trunking systems (busways) AS/NZS 3439.3 2002 Particular requirements for low-voltage switchgear and controlgear assemblies

intended to be installed in places where unskilled persons have access for their use - Distribution boards

AS 3494 1997 Bidettes and bidets AS 3497 1998 Drinking water treatment units - Plumbing requirements AS/NZS 3500 Plumbing and Drainage AS/NZS 3500.0 2003 Glossary of terms



AS/NZS 3500.1 2003 Water services AS/NZS 3500.2 2003 Sanitary plumbing and drainage AS/NZS 3500.3 2003 Stormwater drainage AS/NZS 3500.4 2003 Heated water services AS/NZS 3500.5 2000 Domestic installations AS/NZS 3504 2006 Fire blankets AS/NZS 3518 2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure

applications AS 3519 2005 Timber - Machine proof-grading AS 3541 Synthetic sporting surfaces AS 3541.1 1988 General principles AS 3566 Self-drilling screws for the building and construction industries AS 3566.1 2002 General requirements and mechanical properties AS 3566.2 2002 Corrosion resistance requirements AS 3568 1999 Oils for reducing the viscosity of residual bitumen for pavements AS 3571 1989 Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water

supply, sewerage and drainage applications AS 3575 1995 Clearing saws, brushcutters and grass trimmers - Safety requirements AS 3576 1998 Clearing saws, brushcutters and grass trimmers - Guide to safe working practices AS 3578 1993 Cast iron non-return valves for general purposes AS 3582 Supplementary cementitious materials for use with portland and blended cement AS 3582.1 1998 Fly ash AS 3582.2 2001 Slag - Ground granulated iron blast-furnace AS 3583 Methods of test for supplementary cementitous materials for use with portland cement AS 3583.1 1998 Determination of fineness by the 45 m sieve AS 3583.2 1991 Determination of fmoisture content AS 3583.3 1991 Determination of loss on ignition S 3583.12 1991 Determination of available alkali AS 3583.13 1991 Determination of chloride ion content AS 3583.14 1991 Determination of insoluble residue content AS 3590 Screen-based workstations AS 3590.2 1990 Workstation furniture AS 3600 2001 Concrete structures AS 3610 1995 Formwork for concrete AS 3623 1993 Domestic metal framing AS 3660 Termite management AS 3660.1 2000 New building work AS/NZS 3662 2005 Performance of showers for bathing AS/NZS 3666 Air-handling and water systems of buildings - Microbial control AS/NZS 3666.1 2002 Design, installation and commissioning AS/NZS 3666.2 2002 Operation and maintenance AS/NZS 3666.3 2000 Performance-based maintenance of cooling water systems AS/NZS 3678 1996 Structural steel - Hot-rolled plates, floorplates and slabs AS/NZS 3679 Structural steel AS/NZS 3679.1 1996 Hot-rolled bars and sections AS/NZS 3679.2 1996 Welded I sections AS 3680 1989 Polyethylene sleeving for ductile iron pipelines AS 3681 1989 Guidelines for the application of polyethylene sleeving to ductile iron pipelines and

fittings AS 3688 2005 Water supply - Metallic fittings and end connectors AS 3690 1989 Installation of ABS pipe systems AS 3691 1989 Solvent cement and priming (cleaning) fluids for use with ABS pipes and fittings AS 3700 2001 Masonry structures AS 3705 2003 Geotextiles - Identification, marking, and general data AS 3706 Geotextiles - Methods of test ASD 3706.11 2004 Determination of durability - Resistance to degradation by light, heat and moisture AS 3715 2002 Metal finishing - Thermoset powder coatings for architectural applications of aluminium

and aluminium alloys AS 3725 2007 Loads on buried concrete pipes AS 3725 Supp 1 2007 Loads on buried concrete pipes - Commentary (Supplement to AS 3725-1989) AS 3727 1993 Guide to residential pavements AS 3730 Guide to the properties of paints for buildings AS 3730.1 2006 Latex - Interior - Flat AS 3730.2 2006 Latex - Interior - Semi-gloss



AS 3730.3 2006 Guide to the properties of paints for buildings AS 3730.5 2006 Solvent-borne - Interior - Semi-gloss AS 3730.6 2006 Solvent-borne - Interior/exterior - Full gloss enamel AS 3730.7 2006 Latex - Exterior - Flat AS 3730.8 2006 Latex - Exterior - Low gloss AS 3730.9 2006 Latex - Exterior - Semi-gloss AS 3730.10 2006 Latex - Exterior - Gloss AS 3730.12 2006 Latex - Interior - Gloss AS 3730.13 2006 Primer - Wood - Solvent-borne - Interior/exterior AS 3730.14 2006 Undercoat - Solvent-borne - Interior/exterior AS 3730.15 2006 Primer - Latex - For metallic zinc surfaces AS 3730.16 2006 Latex - Self-priming timber finish - Exterior AS 3730.17 2006 Primer - Wood - Latex - Interior/exterior AS 3730.18 2006 Undercoat/sealer - Latex - Interior/exterior AS 3730.21 2006 Primer - Solvent-borne - For ferrous metallic surfaces AS 3730.22 2006 Concrete and masonry sealer - Solvent-borne - Interior/exterior AS 3730.25 2006 Clear finish - Solvent-borne - Interior AS 3730.27 2006 Clear coatings for interior timber floors AS 3730.28 2006 Wood stain - Solvent-borne - Exterior AS 3730.29 2006 Solvent-borne - Exterior/interior - Paving paint AS 3731 Stationary batteries-Nickel-cadmium AS 3731.1 1995 Vented type AS 3731.2 1995 Valve-regulated type AS/NZS 3733 1995 Textile floor coverings - Cleaning maintenance of residential and commercial carpeting AS 3735 2001 Concrete structures retaining liquids AS 3740 2004 Waterproofing of wet areas within residential buildings AS 3743 2003 Potting mixes AS/NZS 3750 Paints for steel structures AS/NZS 3750.1 1994 Epoxy mastic (two-pack) - For rusted steel AS/NZS 3750.4 1994 Bitumen paint AS/NZS 3750.6 1994 Full gloss polyurethane (two-pack) AS/NZS 3750.9 1994 Organic zinc-rich primer AS 3750.13 1997 Epoxy primer (two pack) AS/NZS 3750.15 1998 Inorganic zinc silicate paint AS/NZS 3750.17 1998 Etch primers (single pack and two pack) AS/NZS 3760 2003 In-service safety inspection and testing of electrical equipment AS 3768 1990 Guide to the effects of temperature on electrical equipment AS 3780 1994 The storage and handling of corrosive substances AS 3784 Coatings for fire protection of building elements AS 3784.1 1990 Guide to selection and installation of sprayed mineral coatings AS 3786 1993 Smoke alarms AS/NZS 3788 2006 Pressure equipment - In-service inspection AS 3792 Ride-on lawnmowers AS 3792.1 1990 Powered rotary ride-on mowers AS 3798 2007 Guidelines on earthworks for commercial and residential developments AS 3799 1998 Liquid membrane-forming curing compounds for concrete AS/NSZ 3813 1998 Plastic monobloc chairs AS 3814 2005 Industrial and commercial gas-fired appliances AS 3818 Timber - Heavy structural products - Visually graded AS 3818.2 2004 Railway track timbers AS 3818.3 2001 Piles AS/NZS 3823 Performance of electrical appliances - Airconditioners and heat pumps AS/NZS 3823.1.1 1998 Non-ducted airconditioners and heat pumps - Testing and rating for performance AS/NZS 3823.1.2 2001 Test Methods - Ducted airconditioners and air-to-air heat pumps - Testing and rating

for performance AS/NZS 3823.2 2005 Energy labelling and minimum energy performance standard (MEPS) requirements AS/NZS 3837 1998 Method of test for heat and smoke release rates for materials and products using an

oxygen consumption calorimeter AS/NZS 3845 1999 Road safety barrier systems AS 3850 2003 Tilt-up concrete construction AS 3862 2002 External fusion-bonded epoxy coating for steel pipes AS 3865 1991 Calculation of the effects of short-circuit currents AS 3873 2001 Pressure equipment - Operation and maintenance



AS/NZS 3879 2006 Solvent cements and priming fluids for use with unplasticized PVC (UPVC) pipes and fittings

AS 3894 Site testing of protective coatings AS 3894.3 2002 Determination of dry film thickness AS 3894.5 2002 Determination of surface profile AS 3894.6 2002 Determination of residual contaminants. AS 3894.10 2002 Inspection report - Daily surface and ambient conditions AS 3894.11 2002 Equipment report AS 3894.12 2002 Inspection report Coating AS 3894.13 2002 Inspection report Daily AS 3894.14 2002 Inspection report - Daily painting AS/NZS 3896 1998 Waters - Examination for legionella including Legionella pneumophila AS/NZS 3947 Low voltage switchgear and controlgear AS/NZS 3947.3 2001 Switches, disconnectors, switch-disconnectors and fuse-combination units AS/NZS 3947.4.3 2000 Contactors and motor-starters - A.C. semiconductor controllers and contactors for

non-motor loads AS/NZS 3947.5.5 2000 Control circuit devices and switching elements - Electrical emergency stop device

with mechanical latching function AS/NZS 3947.5.6 2000 Control circuit devices and switching elements - D.C.interface for proximity sensors

and switching amplifiers (NAMUR) AS/NZS 3947.6.1 2001 Multiple function equipment - Automatic transfer switching equipment AS 3952 2002 Water supply - spring hydrant valve for waterworks purposes AS 3958 Ceramic tiles AS 3958.1 2007 Guide to the installation of ceramic tiles AS 3958.2 1992 Guide to the selection of a ceramic tiling system AS 3959 1999 Construction of buildings in bushfire-prone areas AS 3972 1997 Portland and blended cements AS 3996 2006 Metal access covers, road grates and frames AS 3999 1992 Thermal insulation of dwellings - Bulk insulation - Installation requirements AS 4000 1997 General conditions of contract AS/NZS 4020 2005 Testing of products for use in contact with drinking water AS/NZS 4025 Paints for equipment including ships AS/NZS 4025.1 1992 Solvent-borne - Interior and exterior - Full gloss enamel AS/NZS 4026 2001 Electric cables - For underground residential distribution systems AS/NZS 4029 Stationary batteries-Lead-acid AS 4029.1 1994 Vented type AS/NZS 4029.2 2000 Valve-regulated sealed type AS 4029.3 1993 Pure lead positive pasted plate type AS 4032 Water supply - Valves for the control of hot water supply temperatures AS 4032.3 2004 Requirements for field testing, maintenance or replacement of thermostatic mixing

valves, tempering valves and end of line temperature control devices AS 4041 2006 Pressure piping AS 4044 1992 Battery chargers for stationary batteries AS 4049 Paints and related materials - Pavement marking materials AS 4049.1 2005 Solvent-borne paint - For use with surface applied glass beads AS 4049.2 2005 Thermoplastic pavement marking materials - For use with surface applied glass

beads AS 4049.3 2005 Waterborne paint - For use with drop-on beads AS 4049.4 2006 High performance pavement marking systems AS 4055 2006 Wind loads for housing AS 4057 1992 Powered walk-behind and hand-held lawn trimmers and lawn edge trimmers -

Mechanical safety requirements and test methods AS/NZS 4058 2007 Precast concrete pipes (pressure and non-pressure) AS 4060 1992 Loads on buried vitrified clay pipes AS 4070 1992 Protection of low-voltage electrical installations and equipment in MEN systems from

transient overvoltages AS 4072 Components for the protection of openings in fire-resistant separating elements AS 4072.1 2005 Service penetrations and control joints AS 4085 1992 Automatic sliding door assemblies AS 4087 2004 Metallic flanges for waterworks purposes AS 4089 1993 Priming paint for steel - Single component - General purpose AS 4100 1998 Steel structures AS 4111 1993 Starters for fluorescent lamps - Performance requirements AS 4114 Spray painting booths, designated spray painting areas and paint mixing rooms.



AS 4114.1 2003 Design, construction and testing AS 4114.2 2003 Installation and maintenance AS 4118 Fire sprinkler systems AS 4118.1.4 1994 Components - Valve monitors AS 4120 1994 Code of Tendering AS/NZS 4129 2000 Fittings for polyethylene (PE) pipes for pressure applications AS/NZS 4130 2003 Polyethylene (PE) pipes for pressure applications AS/NZS 4131 2003 Polyethylene (PE) compounds for pressure pipes and fittings AS 4139 2003 Fibre-reinforced concrete pipes and fittings AS 4145 Locksets AS 4145.1 1993 Glossary of terms AS 4145.2 1993 Mechanical locksets for doors in buildings AS 4145.3 2001 Mechanical locksets for windows in buildings AS 4145.4 2002 Padlocks AS 4154 1993 General access floors (elevated floors) AS 4155 Test methods for general access floors AS 4155.1 1993 Test for concavity and convexity AS 4155.2 1993 Test for twist AS 4155.3 1993 Test for panel squareness AS 4155.6 1993 Test for floor resistance for electrostatic control AS 4155.7 1993 Test for 300 mm x 300 mm concentrated load AS 4155.8 1993 Test for 25 mm x 25 mm concentrated load AS 4155.9 1993 Test for ultimate test load (safety factor tests for concentrated load) AS 4155.10 1993 Test for dynamic soft body impact load AS 4155.11 1993 Test for dynamic rolling loads with the tread made from resinous polymer AS 4155.12 1993 Test for pedestal strength by concentrated vertical load AS 4155.13 1993 Test for pedestal free movement by horizontal load AS 4155.14 1993 Test for pedestal strength by horizontal moment AS 4158 2003 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes AS 4174 1994 Synthetic shade cloth AS 4178 1994 Electromagnetic door holders AS 4180 Drift loss from cooling towers - Laboratory measurement AS 4180.1 1994 Chloride balance method AS 4191 1994 Portable traffic signal systems AS 4192 2006 Illuminated flashing arrow signs AS 4198 1994 Precast concrete chambers for sewerage applications AS/NZS 4200 Pliable building membranes and underlays AS/NZS 4200.1 1994 Materials AS/NZS 4200.2 1994 Installation requirements AS/NZS 4251 Electromagnetic compatibility - Generic emission standard AS/NZS 4251.1 1999 Residential, commercial and light industry AS/NZS 4253 1994 Mailboxes AS 4254 2002 Ductwork for air-handling systems in buildings AS 4256 Plastic roof and wall cladding materials AS 4256.1 2006 General requirements AS 4256.2 2006 Unplasticized polyvinyl chloride (uPVC) building sheets AS 4256.3 2006 Glass fibre reinforced polyester (GRP) AS 4256.4 2006 Unplasticized polyvinyl chloride (uPVC) wall cladding boards AS 4256.5 2006 Polycarbonate AS 4260 1997 High efficiency particulate air (HEPA) filters - Classification, construction and

performance AS/NZS 4266 Reconstituted wood-based panels - Methods of test AS/NZS 4266.16 2004 Formaldehyde emission - Dessicator method AS 4276 Water microbiology AS/NZS 4276.3.1 2007 Heterotrophic colony count methods - Pour plate method using plate count agar AS/NZS 4276.3.2 2003 Heterotrophic colony count methods - Plate count of water containing biocides AS/NZS 4284 1995 Testing of building facades AS 4285 2007 Skylights AS 4288 2003 Soft underlays for textile floor coverings AS 4290 2000 Design and installation of revolving doors AS/NZS 4296 1995 Cable trunking systems AS 4321 2001 Fusion-bonded medium density polyethelene coating and lining for pipes and fittings AS/NZS 4357 Structural Laminated Veneer Lumber AS/NZS 4357.0 2005 Specifications



AS 4373 2007 Pruning of amenity trees AS/NZS 4383 Various Preparation of documents used in electro-technology AS/NZS 4386 Domestic kitchen assemblies AS/NZS 4386.1 1996 Kitchen units AS 4388 1996 A method of temperature-rise assessment by extrapolation for partially type-tested

assemblies (PTTA) of low-voltage switchgear and controlgear AS/NZS 4389 1996 Safety mesh AS 4397 2007 Electroplated coatings of zinc on steel fasteners with imperial threads AS/NZS 4402 1996 Hexagon head tapping screws AS/NZS 4403 1996 Slotted pan head tapping screws AS/NZS 4404 1996 Slotted countersunk (flat) head tapping screws (common head style) AS/NZS 4405 1996 Slotted raised countersunk (oval) head tapping screws (common head style) AS/NZS 4406 1996 Cross recessed pan head tapping screws AS/NZS 4407 1996 Crossed recessed countersunk (flat) head tapping screws (common head style) AS/NZS 4408 1996 Crossed recessed raised countersunk (oval) head tapping screws AS/NZS 4409 1996 Hexagon washer head tapping screws AS/NZS 4410 1996 Hexagon flange head tapping screws AS 4419 2003 Soils for landscaping and garden use AS 4428 Fire detection, warning, control and intercom systems - Control and indicating

equipment AS 4428.1 1998 Fire AS 4428.3 2004 Fire brigade panel AS 4428.4 2004 Intercommunication systems for emergency purposes AS 4428.5 1998 Power supply units AS 4428.6 1997 Alarm signalling equipment AS 4428.7 1999 Air-handling fire mode control panel AS 4428.9 2006 Requirements for wire-free alarm zone circuits AS 4428.10 1998 Alarm investigation AS 4429 1999 Methods of test and rating requirements for smoke-spill fans AS/NZS 4438 1997 Height adjustable swivel chairs AS 4440 2004 Installation of nailplated timber roof trusses AS 4441(Int) 2003 Oriented PVC (PVC-O) pipes for pressure applications AS/NZS 4442 1997 Office desks AS/NZS 4443 1997 Office panel systems - Workstations AS 4446 1999 Manufacture of nailplate-joined timber products AS 4454 2003 Composts, soil conditioners and mulches AS/NZS 4455 1997 Masonry units and segmental pavers AS/NZS 4456 Masonry units and segmental pavers - Methods of test AS 4456.0 2003 General introduction and list of methods AS 4456.3 2003 Determining dimensions AS 4456.5 2003 Determining breaking load of segmental paving units AS 4456.9 2003 Determining abrasion resistance AS/NZS 4456.10 2003 Determining resistance to salt attack AS 4484 2004 Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour

coding AS 4486 Playgrounds and playground equipment AS 4486.1 1997 Development, installation, inspection, maintenance and operation AS/NZS 4491 1997 Timber - Glossary of terms in timber related Standards AS/NZS 4494 1998 Discharge of commercial and industrial liquid waste to sewer - General performance

requirements AS/NZS 4505 1998 Domestic garage doors AS/NZS 4506 2005 Metal finishing - Thermoset powder coatings AS 4508 1999 Thermal resistance of insulation for ductwork used in building airconditioning AS/NZS 4534 2006 Zinc and zinc/aluminium-alloy coatings on steel wire AS/NZS 4548 Guide to long-life coatings for concrete and masonry AS/NZS 4548.1 1999 Wall coatings - Latex extensible AS/NZS 4548.2 1999 Latex finish coatings - High-build, low profile AS/NZS 4548.3 1999 Latex - Textured coatings - Non-aggregate AS/NZS 4548.4 1999 Latex - Textured coatings - Aggregate filled AS 4552 2005 Gas fired water heaters heaters for hot water supply and/or central heating AS 4566 2005 Flue cowls - Gas appliances AS/NZS 4586 2004 Slip resistance classification of new pedestrian surface materials AS 4594 Internal combustion engines - Performance AS 4594.0 1999 Application



AS 4594.1 1999 Standard reference conditions, declarations of power, fuel and lubricating oil consumption and test methods

AS 4597 1999 Installation of roof slates and shingles (Non-interlocking type) AS/NZS 4600 2005 Cold-formed steel structures AS/NZS 4602 1999 High visibility safety garments AS/NZS 4610 Furniture - School and educational AS/NZS 4610.2 1999 Chairs - Strength, durability and stability AS/NZS 4610.3 1999 Tables and storage furniture - Strength, durability and stability AS 4662 2003 Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998) AS/NZS 4663 2004 Slip resistance measurement of existing pedestrian surfaces AS/NZS 4666 2000 Insulating glass units AS/NZS 4667 2000 Quality requirements for cut-to-size and processed glass AS/NZS 4668 2000 Glossary of terms used in the glass and glazing industry AS/NZS 4671 2001 Steel reinforcing materials AS/NZS 4672 Steel prestressing materials AS/NZS 4672.1 2007 General requirements AS/NZS 4672.2 2007 Testing requirements AS 4678 2002 Earth-retaining structures AS/NZS 4680 2006 Hot-dipped galvanized (zinc) coatings on fabricated ferrous articles AS/NZS 4688 Furniture - Fixed height chairs AS/NZS 4688.1 2000 Ergonomic and general requirements AS/NZS 4692 Electric water heaters AS/NZS 4692.1 2005 Energy consumption, performance and general requirements AS/NZS 4692.2 2005 Minimum Energy Performance Standard (MEPS) requirements and energy labelling AS 4744 Steel shoring and trench lining AS 4744.1 2000 Design AS 4750 2003 Electrogalvanized (zinc) coatings on ferrous hollow and open sections AS 4765 (Int) 2000 Modified PVC (PVC-M) pipes for pressure applications AS/NZS 4766 2006 Polyethylene storage tanks for water and chemicals AS/NZS 4782 Double-capped fluorescent lamps - Performance specifications AS/NZS 4782.1 2004 General (IEC 60081:2000, MOD) AS/NZS 4782.2 2004 Minimum Energy Performance Standard (MEPS) AS/NZS 4783 Performance of electrical lighting equipment - Ballasts for fluorescent lamps AS/NZS 4783.1 2001 Method of measurement to determine energy consumption and performance of

ballasts lamp circuits AS/NZS 4783.2 2002 Energy labelling and minimum energy performance standards requirements AS 4785 Timber - Softwood - Sawn and milled products AS 4785.1 2002 Product specification AS 4785.2 2002 Grade description AS 4785.3 2002 Timber for furniture components AS 4786 Timber flooring AS 4786.2 2005 Sanding and finishing AS/NZS 4791 2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line

process AS/NZS 4792 2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous

or a specialized process AS 4794 2001 Non-return valves - Swing check and tilting disc AS 4806 Closed circuit television (CCTV) AS 4806.2 2006 Application guidelines AS 4809 2003 Copper pipe and fittings - Installation and commissioning AS 4843 2001 Synthetic weed blocking fabric AS/NZS 4858 2004 Wet area membranes AS/NZS 4859 Materials for the thermal insulation of buildings AS/NZS 4859.1 2002 General criteria and technical provisions AS 4902 2000 General conditions of contract for design and construct AS 4905 2002 Minor works contract conditions (Superintendent administered) AS/NZS 4911 2003 General conditions of contract for the supply of equipment without installation AS/NZS 4961 2003 Electric cables - Polymeric insulated - For distribution and service applications AS 4992 Ceramic tiles: Products for installation AS 4992.1 2006 Terms, definitions and specifications for adhesives AS/NZS 5000 Electric cables - Polymeric insulated AS/NZS 5000.1 2005 For working voltages up to and including 0.6/1 Kv (1.2) kV AS 5008 2001 Hygienic rendering of animal products AS 5010 2001 Hygienic production of ratite (emu/ostrich) meat for human consumption



AS 5011 2001 Hygienic production of natural casings for human consumption AS 5039 2003 Security screen doors and security window grilles AS 5040 2003 Installation of security screen doors and window grilles AS/NZS 5065 2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage

applications AS 5067 2003 Timber - Non-structural glued laminated - Performance and production requirements AS 5068 2006 Timber - Finger joints in structural products AS 5079 Filing cabinets AS 5079.1 2003 Lateral filing cabinets (ANSI BIFMA X3.2-1997, MOD) AS 5079.2 2003 Vertical filing cabinets ANSI BIFMA X3.3-1997, MOD) AS 5079.3 2003 Mobile pedestals (ANSI BIFMA X3.3-1998, MOD) ATS 5200 Technical specification for plumbing and drainage products ATS 5200.026 2004 Cold water storage tanks AS 5601 2004 Gas installations AS 5604 2005 Timber - Natural durability ratings AS ISO 5801 2004 Industrial fans - performance testing using standardized airways AS 6002 1999 Domestic electric meter enclosures AS/NZS 6400 2005 Water efficient products - Rating and labelling AS 7240 Fire detection and alarm systems AS 7240.2 2004 Control and indicating equipment AS 7240.5 2004 Point-type heat detectors AS 7240.6 2006 Carbon monoxide fire detectors using electro-chemical cells AS 7240.7 2004 Point-type smoke detectors using scattered light, transmitted light or ionisation AS 7240.13 2006 Compatibility assessment of system components AS 7240.15 2004 Multisensor fire detectors AS 7240.21 2006 Routing equipment AS/NZS ISO 9000 2006 Quality management and quality assuranace standards AS/NZS ISO 9001 2000 Quality management systems - Requirements AS ISO 9239 Reaction to fire tests for floor coverings AS ISO 9239.1 2003 Determination of the burning behaviour using a radiiant heat source AS ISO 9705 2003 Fire tests - Full-scale room test for surface products AS/NZS ISO 10005 2006 Quality management systems - Guidelines for quality plans AS/ISO 10013 2003 Guidelines for quality management system documentation AS ISO 11654 2002 Acoustics - Rating of sound absorption - Materials and systems AS 12239 2004 Fire detection and alarm systems - Smoke alarms (ISO 12239:2003, MOD) AS/NZS ISO/IEC 15018 2005 Information technology - Generic cabling for homes AS/NZS ISO 19011 2003 Guidelines for quality and/or environmental management systems auditing (ISO

19011:2002) AS/NZS ISO/IEC 24702 2007 Telecommunications installations - Generic cabling - Industrial premises AS 60044 Instrument transformers AS 60044.1 2007 Current transformers AS 60146 Semiconductor convertors AS 60146.1.1 2002 General requirements and line commutated converters - Specifications of basic

requirements AS 60146.2 2001 Self-commutated semiconductor converters including direct d.c. converters AS/NZS 60155 2000 Glow-starters for fluorescent lamps AS 60269 Low voltage fuses AS 60269.1 2005 General requirements AS 60269.2.0 2005 Supplementary requirements for fuses for use by authorized persons (fuses mainly

for industrial application) AS 60269.2.1 2005 Supplementary requirements for fuses for use by authorized persons (fuses mainly

for industrial application) - Sections I TO VI: Examples of types of standardised fuses

AS 60529 2004 Degrees of protection provided by enclosures (IP Code) AS/NZS 60598 Luminaires AS/NZS 60598.1 2003 General requirements and tests AS/NZS 60598.2.1 1998 Particular requirements - Fixed general purpose luminaires AS/NZS 60598.2.2 2001 Particular requirements - Recessed luminaires (IEC 60598-2-2:1996, MOD) AS/NZS 60598.2.4 2005 Particular requirements - Portable general purpose luminaries AS/NZS 60598.2.5 2002 Particular requirements - Floodlights AS/NZS 60598.2.6 1998 Particular requirements - Luminaires with built-in transformers or convertors for

filament lamps AS/NZS 60598.2.18 1998 Particular requirements - Luminaires for swimming pools and similar applications



AS/NZS 60598.2.19 2001 Particular requirements - Air handling luminaires (safety requirements) (IEC 60598.2.19:1981, MOD)

AS/NZS 60598.2.25 2001 Particular requirements - Lminaires for use in clinical areas of hospitals and health care buildings (IEC 60598.2.25:1994 MOD)

AS/NZS 60898 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations

AS/NZS 60898.1 2004 Circuit-breakers for a.c. operation AS/NZS 60901 2003 Single-capped fluorescent lamps - Performance specifications AS/NZS 60921 2002 Ballasts for tubular fluorescent lamps - Performance requirements (IEC 60921:1988,

MOD) AS/NZS 60923 1998 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps)

- Performance requirements AS/NZS 60929 2005 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance

requirements AS 60947 Low voltage switchgear and controlgear AS 60947.1 2004 General rules AS 60947.2 2005 Circuit-breakers AS 60947.4.1 2004 Contactors and motor-starters - Electromechanical contactors and motor-starters AS 60947.4.2 2004 Contactors and motor-starters - A.C. semiconductor motor controllers and starters AS 60947.5.1 2004 Control circuit devices and switching elements - Electromechanical control circuit

devices AS 60947.5.2 2004 Control circuit devices and switching elements - Proximity switches AS 60947.5.4 2004 Control circuit devices and switching elements - Methods of assessing the

performance of low-energy contacts - Special tests AS 60947.6.2 2004 Multiple function equipment - Control and protective switching devices (or

equipment) (CPS) AS 60947.8 2005 Control units for built-in thermal protection (PTC) for rotating electrical machines AS/NZS 60968 2001 Self ballasted lamps for general lighting services - Safety requirements (IEC

60968:1988, MOD) AS/NZS 60969 2001 Self ballasted lamps for general lighting services - Performance requirements AS/NZS 61000 Electromagnetic compatibility (EMC) AS/NZS 61000.3.2 2007 Limits - Limits for harmonic current emissions (equipment input current less than or

equal to 16 A per phase) AS/NZS 6100.6.1 2006 Generic standards - Immunity for residential, commercial and light-industrial

environments AS/NZS 61008 Residual current operated circuit-breakers without integral overcurrent protection for

household and similar uses (rcbos) AS/NZS 61008.1 2004 General rules AS/NZS 61009 Residual current operated circuit-breakers with integral overcurrent protection for

household and similar uses (RCBOs) AS/NZS 61009.1 2004 General rules AS/NZS 61048 2002 Auxiliaries for lamps - Capacitators for use in tubular fluorescent and other discharge

lamp circuits - General safety requirements AS/NZS 61049 2002 Auxiliaries for lamps - Capacitators for use in tubular fluorescent and other discharge

lamp circuits - Performance requirements AS/NZS 61347 Lamp controlgear AS/NZS 61347.1 2002 General and safety requirements (IEC 61347-1:2000, MOD) AS/NZS 61347.2.3 2004 Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps AS/NZS 61347.2.8 2003 Particular requirements for ballasts for fluorescent lamps AS/NZS 61558 Safety of power transformers, power supply units and similar AS/NZS 61558.1 2000 General requirements and tests. (IEC 61558-1:1997, MOD) AS 61800 Adjustable speed electrical power drive systems AS 61800.2 2004 General requirements - Rating specifications for low voltage adjustable frequency

a.c. power drive systems AS 61800.3 2005 EMC product standard including specific test methods AS/NZS 61935 Testing of balanced communication cabling in accordance with ISO/IEC 11801 AS/NZS 61935.1 2006 Installed cabling AS/NZS 61935.2 2006 Patch cords and work area cords AS/NZS 62026 Low-voltage switchgear - Controller-device interfaces (CDI's) AS/NZS 62026.1 2001 General rules AS/NZS 6

Documents

01 General