01 41 00 Regulatory Requirements REV 2

8/10/2019 01 41 00 Regulatory Requirements REV 2

1/3

Sulvaris Vitasul Facili ty December 07, 2013Strachan, Alberta, Canada 1 (3)

H:\2012\2262SUL\20\000\Purchasing\RFQ's\RFQ 046 Electric Traction Elevator\For Bid - 2-4-13\01 41 00 Regulatory Requirements REV2.docx

01 41 00 - 1

SECTION 01 41 00REGULATORY REQUIREMENTS

CONTENTS

PART 1 - GENERAL 2PART 2 - PRODUCTS (NOT USED) 2PART 3 - EXECUTION (NOT USED) 3

INITIAL/DATE/APPROVAL

Rev. DateIssued

DisciplineEngineer

ProjectLeader

BusinessLeader

Pages Revised and Comments

Orig 12/07/12 DGF CJM For Review

1 12/27/12 DGF CJM For Bid

2 1/28/13 RDB DGF CJM For Bid

Pyry Project No. 43B2262.20


2/3

SULVARIS - VITASUL FACILITYSECTION 01 41 00REGULATORY REQUIREMENTS


01 41 00 - 2

Pyry Project No.: 43B2262.20December 07, 2013

Page 2 of 3

PART 1 - GENERAL

1.1 RELATED DOCUMENTS

A. Drawings and general provisions of the Specification, as listed in SECTION 00 01 10(Table of Contents) apply to this Section.

1.2 SUMMARY

A. Design, materials and workmanship of the equipment, including the variousaccessories furnished herein, will fully comply with the requirements of the latesteditions, as of the Effective Date of the Purchase Order of all local, province and

Canadian laws, codes and regulations. The following listed standards and codes willgovern the design and selection of equipment and material supplied, in the event ofdifferences between codes and/or standards, the most stringent shall apply:

1.3 STANDARDS AND CODES

A. The following listed standards and codes in effect as of the date of purchase and anysubsections thereof as applicable, shall govern the design and selection of theequipment and materials supplied.

ABSA - Alberta Boilers Safety Association

ACI American Concrete Institute

AFBMA - Anti-Friction Bearings Manufacturers Association

AFC Alberta Fire Code

AGMA - American Gear Manufacturers Association

ANMAC - Air Moving and Control Association

ANSI - American National Standards Institute

CPI - Canadian Petroleum Institute

CSCE - Canadian Society of Civil Engineers

ASHRAE American Society of Heating, Refrigeration and Air ConditioningEngineers

CSME - Canadian Society of Mechanical Engineers

ASTM - American Society for Testing and Materials

CAC - The Cement Association of Canada

CEC Canadian Institute of Mining, Metallurgy and Petroleum

CIPH Canadian Institute of Plumbing and Heating


3/3

SULVARIS - VITASUL FACILITYSECTION 01 41 00REGULATORY REQUIREMENTS


01 41 00 - 3

Pyry Project No.: 43B2262.20December 07, 2013

Page 3 of 3

CISC - Canadian Institute of Steel Construction

CMAA Crane Manufacturers Association of America

CRN Canadian Registration Number (for Alberta) CSA - Canadian Standards Association

CWB - Canadian Welding Bureau

EFC Electro Federation of Canada

ESA - Electrical Safety Authority

HEI - Heat Exchanger Institute

HI - Hydraulic Institute

ABC - Alberta Building Code

ICC - International Code Council

IEEE - Institute of Electrical and Electronics Engineers

ISA - International Society of Automation

ISO - International Organization for Standardization

JIC - Joint Industrial Council

MSS - Manufacturers Standardization Society

NACE - National Association of Corrosion Engineers

NBA - National Building Code

CEC - Canadian Electrical Code (ANSI/NFPA-709)

NEMA - National Electrical Manufacturers Association

NEMA IS1.1 - Enclosures for Industrial Control

NFPA - National Fire Protection Association

OHS - Occupational Health and Safety Act of Alberta

RMA - Rubber Manufacturers Association

SAMA - Scientific Apparatus Makers Association

SSPC - The Society for Protective Coatings

TEMA - Tubular Exchanger Manufacturers Association

ULC - Underwriters Laboratory of Canada

PART 2 - PRODUCTS (NOT USED)

PART 3 - EXECUTION (NOT USED)

END OF SECTION 01 41 00

Documents

01 41 00 Regulatory Requirements REV 2