77
 Easy CramBible Lab 000-104 Aix 6.1 Administration ** Single-user License ** This copy can be only used by yourself for educational purposes  Web: http://www.crambible.com/  E-mail: [email protected]  

000-104 AIX Bible Study

Embed Size (px)

Citation preview

Page 1: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 1/76

 

Easy CramBible Lab

000-104

Aix 6.1 Administration 

** Single-user License **

This copy can be only used by yourself for educational purposes。 

Web: http://www.crambible.com/  

E-mail: [email protected]  

Page 2: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 2/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

Important Note

Please Read Carefully Study Tips

This  product will  provide  you questions  and  answers  along with  carefully  compiled  and 

written by

 our

 experts.

 Try

 to

 understand

 the

 concepts

 behind

 the

 questions

 instead

 of 

 

cramming the questions. 

Go  through  the  entire document  at  least  twice  so  that  you make  sure  that  you  are not 

missing anything. 

Latest Version

We  are  constantly  reviewing  our  products.  New  material  is  added  and  old  material  is 

revised. Free updates are available for 90 days after the purchase. You should check your 

member zone at CramBible an update 3‐4 days before the scheduled exam date. 

Here is the procedure to get the latest version: 

1. Go to www.CramBible.com 

2. Click on Member zone/Log in 

3. The latest versions of  all purchased products are download from here. Just click the links. 

For most updates, it is enough  just to print the new questions at the end of  the new version, 

not the whole document. 

FeedbackFeedback on specific questions should be send to [email protected]. You should state: 

Exam number and version, question number, and login ID. 

Our experts will answer your mail promptly. 

Copyright 

Each pdf   file  contains  a unique  serial number  associated with  your particular name  and 

contact information for security purposes. So if  we find out that a particular pdf  file is being 

distributed by you, CramBible reserves the right to take  legal action against you according 

to 

the 

International 

Copyright 

Laws. 

Page 3: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 3/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

THE TOTAL NUMBER OF QUESTIONS IS 226

QUESTION NO 1.A booting system appears to be hanging with an LED code of 0c54.

What is the likely cause?

A. An AIX install is in progress.

B. The rootvg volume group is corrupt.

C. The TCPIP configuration is incorrect

D. At least one paging device cannot be varied on.

Answser:A

QUESTION NO 2.An LPAR has hung during a reboot, reporting a 0552 LED code. What

does this signify?

A. varyon of the paging device failed.

B. fsck of the root (/) filesystem failed.

C. varvon of the root volume group failed.

D. IPL device could not be opened or a read failed.

Answser:C

QUESTION NO 3.An administrator is installing AIX 6.1 on a new LPAR and the boot

sequence has stalled with reference code 0c31.

What is the most likely cause?

A. The system is waiting for user input to define console type Ift0.

B. The system is waiting for user input to define console type tty0.

C. The system is waiting for user input to define console type vtv0.

D. The system is waiting for user input to define console type vsa0.

Answser:C

QUESTION NO 4.NIM fails to successfully network-boot an LPAR and install AIX. The

administrator wants to first rule out network 

configuration or routing to be the cause. Which sequence of steps can be employed to debug

the network-boot process?

A. 1. Comment out the bootps entry from the /etc/inetd.conf file on the LPAR.2. Stop all running processes.

Page 4: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 4/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

3. Restart inetd using the 'refresh -s inetd1 command.

4. Flush the ARP table on the NIM master.

5. Initiate the network boot of the LPAR.

B. 1. Comment out the bootps entry from the /etc/inetd.conf file on the NIMmaster.

2. Stop all running bootpd processes.

3. Restart inetd using the 'refresh -s inetd' command.

4. Start bootpd from the command line : '/usr/sbin/bootpd -s -d -d -d'

5. Initiate the network boot of the LPAR.

C. 1. Comment out the bootps entry from the /etc/inetd.conf file on the NIM

master.

2. Stop all running bootpd processes.

3. Restart inetd using the 'refresh -s inetd' command.

4. Start bootpd from the command line : /usr/sbin/bootpd -g nfs -d -d d

5. Initiate the network boot of the LPAR.

D. 1. Comment out the bootps entry from the /etc/inetd.conf file on the NIM

master.

2. Stop all running bootpd processes.

3. Restart the effected daemons using the '/etc/rc.tcpip' command.

4. Start bootpd from the command line : '/usr/sbin/bootpd -s -d -d -d'

5. Initiate the network boot of the LPAR.

Answser:B

QUESTION NO 5.What can be done to enable the debug information for functions to be

displayed when using 'ksh -x' to debug a script?

A. Run the script using 'ksh -fx'.

B. Run the script using 'ksh -a function -x'.

C Edit the script and add 'set -x' at the beginning.

D. Edit the script and add 'set -x' at the beginning of each function.

Answser:D

QUESTION NO 6: While reducing a file system, an administrator receives the following

error message: root@aixserver:/home/root# df -k /var Filesystem 1024-blocks Free %Used

Iused %Iused Mounted on /dev/hd9var 3538944 2686256 25% 14370 3% /var

root@aixserver:/home/root# chfs -a size=-512M /var chfs: There is not enough free space to

Page 5: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 5/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

shrink the file system. What is the most likely cause of the problem?

A.The jfs2log is corrupt.

B.The bos.rte.filesystem fileset is broken.

C.The file system cannot be reduced by a multiple of 512 megabytes.

D.The df command does not reflect fragmentation or the size of the metadata.

Answser: D

QUESTION NO 7: An administrator created a .env file in a user's home directory to

configure a number of custom environment variables for a local application. However, afterthe user logs out and then logs back into the system, the custom variables are not being set.

What is the most likely reason that the custom .env file is being ignored?

A.A shell other than ksh is being used by the user.

B.The line 'export ENV=$HOME/.env' is missing from /etc/profile.

C.The line 'export ENV=$HOME/.env' is missing from the user's .profile.

D.The env_profile attribute is not defined for the user within /etc/security/user.

Answser: C

QUESTION NO 8: Which command will configure a directory /commonfiles so that a user

cannot delete files owned by other users in the same group? A.chmod +S /commonfiles

B.chmod 4775 /commonfiles

C.chmod 1777 /commonfiles

D.chmod -orgx /commonfiles

Answser: C

QUESTION NO 9: An administrator has an existing HMC and POWER6 570 connected to

a network switch. The administrator is planning to install two POWER6 570s with a

dedicated HMC. Which infrastructure is required for the new HMC?

Page 6: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 6/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A.An additional switch for the new HMC.

B.Asynchronous adapters on the new HMC.

C.The two 570 servers are directly connected to the new HMC.

D.One 570 is directly connected to the new HMC and the other is directly connected to the

existing HMC.

Answser: A

QUESTION NO 10: What is the purpose of configuring Workload Manager on a server

used for development and QA? A.To experiment with shared processor pools B.To isolate

physical hardware between workloads

C.To control resource utilization on an application-by-application basis D.To leverage

Workload Partition Manager for performance trending and analysis

Answser: C

QUESTION NO 11: Which best describes the main purpose of Service Update

Management Assistant (SUMA)? A.Schedules the install AIX APARs and updates

B.Automatically installs AIX APARs and updates via the HMC C.Schedules and automates

the download of AIX APARS and updates D.Automatically queries existing machines and

alerts when APARS and updates are available

Answser: C

QUESTION NO 12: What is the minimum number of CECs required to avoid single points

of failure on a Power 570 server?

A.1

Page 7: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 7/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

B.2

C.3

D.4

Answser: B

QUESTION NO 13: What is the likely cause of a system hanging at boot code 557?

A.The system is configuring network adapters.

B.The system is configuring fibre channel devices.

C.The system is unable to mount the rootvg filesystems.

D.The system is unable to access the installation media.

Answser: C

QUESTION NO 14: Which action enables an administrator to make a VIO Server

automatically activate when the

physical machine is powered on?

A.Ensure the /etc/auto_start file exists on the VIOS.

B.Ensure the 'cfgdev -a boot=yes' command has been executed.

C.Select the 'Automatically start when the managed system is powered on' option within the

VIO Server LPAR profile.

D.Add the VIO Server to the 'Automatically start when the managed system is powered on'

field on the Managed System properties.

Answser: C

QUESTION NO 15: Which of the following commands should be used to delete an entry

from the /etc/inittab?

A.xitab

Page 8: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 8/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

B.rmitab

C.chitab

D.delitab

Answser: B

QUESTION NO 16: Which command shows all the paging spaces available on a system?

A.lsps -a

B.showps -a

C.psdisplay -l

D.swaplist -ALL

Answser: A

QUESTION NO 17: Which reference code is displayed during the boot process that signals

that an administrator may interrupt the boot process to enter the SMS Menu?

A.517

B.B0G1

C.E1F1

D.00A8

Answser: C

QUESTION NO 18: An administrator has mirrored the root volume group to a second disk,

but 'bootlist' is failing to correctly add the second disk. What is the likely cause of the

Page 9: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 9/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

problem?

A.The administrator has failed to run 'bosboot -ad <2nd disk>' prior to the bootlist

command.

B.The administrator has failed to run 'bootinfo -B <2nd disk>' prior to the bootlistcommand.

C.The administrator has failed to run 'mirrorvg -m rootvg <2nd disk>' prior to the bootlist

command.

D.The administrator has failed to run 'bosboot -ad /dev/ipldevice <2nd disk>' prior to the

bootlist command.

Answser: A

QUESTION NO 19: What facilitates the installation of the base fileset for the Data

Encryption Standard (DES)

Library Routines?

A.Fix Central

B.AIX 6.1 disc

C.IBM AIX Toolbox

D.AIX Expansion Pack 

Answser: D

QUESTION NO 20: What is the effect of using Capacity on Demand on LPARs

configured on a managed system?

A.It allows dynamic increase of CPU and memory allocation for all LPARs.

B.It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired'

and 'Maximum' partition profile values are equal.

C.It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired'

partition profile values are less than the 'Maximum' values.

D.It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired'

partition profile values are greater than the 'Maximum' values.

Page 10: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 10/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

Answser: C

QUESTION NO 21: Which PowerVM feature will allow LPARs to be configured with

different configurations of resources?

A.Dynamic LPARs

B.LPAR profiles

C.Live Partition Configurability

D.Multiple shared processor pools

Answser: B

QUESTION NO 22: What is the minimum amount of memory required for a new LPAR to

be built via NIM on AIX 6.1? A.128M B.256M

C.512M

D.1024M

Answser: B

QUESTION NO 23: Which command will list ODM class descriptions to provide the

format needed to create a new class?

A.odmadd

B.odmget

C.odmshow

D.odmcreate

Answser: C

QUESTION NO 24: What is the implication of using Deferred versus Concurrent firmware

updates?

A.Deferred firmware updates require a reboot to be applied, while concurrent updates do

Page 11: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 11/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

not.

B.Deferred firmware updates require a full power IPL to be applied while concurrent

updates do not.

C.Concurrent firmware updates require all LPARs to be quiesced and shutdown prior to

initiating the update, while deferred updates do not.

D.Concurrent firmware updates can be applied to multiple managed systems in parallel,

while deferred updates must be applied sequentially.

Answser: B

QUESTION NO 25: An administrator attempts to create a link of /etc/db_conf to the target

directory /db/v9.7/install/config. The following n?command failed toAn administrator

attempts to create a link of /etc/db_conf to the target directory /db/v9.7/install/config. The

following ?n?command failed to create the link: ln /db/v9.7/install/config /etc/db_conf 

Which option should be used when re-running the command to resolve the problem?

A.-s flag to create a soft link 

B.-n flag to force create a hard link 

C.-N flag to force create a hard link 

D.-S flag to force create a soft link 

Answser: A

QUESTION NO 26: Which command(s) will result in the smallest sized backup of the text

files contained in the /staticFS filesystem? A.tar -cvf file_system.tar /staticFS ; gzip

file_system.tar B.tar -xvf /staticFS file_system.tar ; gzip file_system.tar

C.tar -cvf /staticFS file_system.tar ; compress file_system.tar

D.tar -xvf file_system.tar /staticFS ; compress file_system.tar

Answser: A

QUESTION NO 27: An administrator is investigating why a non-prompted NIM rte install

is failing after the successful netboot of the spot. A matching spot and lpp_source arecorrectly allocated to the NIM client in addition to a bosinst_data. What is the most likely

Page 12: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 12/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

cause of the install failure?

A.The bosinst_data has an incorrect console defined.

B.The bosinst_data is incompatible with the level of spot.

C.The bosinst_data has an incorrect disk location defined.

D.The bosinst_data has an incorrect language option defined.

Answser: C

QUESTION NO 28: An administrator tries to change the checksum_offload setting on ent0,

but the chdev

command responds that the adapter is busy. What can be done to resolve this?

A.Use chdev with -P flag and run cfgmgr.

B.Use chdev with -R flag and run cfgmgr.

C.Use chdev with -P flag and reboot the system.

D.Use chdev with -R flag and reboot the system.

Answser: C

QUESTION NO 29: Which command manages interim fixes applied as concurrent

updates?

A.emgr

B.instfix

C.installp

D.smit concurrent_update

Answser: A

Page 13: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 13/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 30: What type of network connection is recommended for HMC and

POWER6 Service Processor

communication?

A.Open B.Public

C.Private D.Virtual

Answser: C

QUESTION NO 31: After mirroring rootvg, a system administrator wants to validate that

the system will boot correctly. Which of the following tasks must be performed before

changing the boot order? A.Run a bosboot -a command B.Mirror the hd5 on the two disks

C.Set up another service mode bootlist D.Check the disks using a lsvg -p rootvg command

Answser: C

QUESTION NO 32: Which cfgmgr flag will display additional information during device

configuration?

A.cfgmgr -a

B.cfgmgr -v

C.cfgmgr -x

D.cfgmgr -o

Answser: B

QUESTION NO 33: Which website provides access to AIX

Technology Level updates?

Page 14: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 14/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A.AIX Tips

B.Fix Central

C.Critical Fixes

D.pSeries and AIX Information Center

Answser: B

QUESTION NO 34: Which command will determine if the Trusted Computer Base is

enabled on a system?

A.getrunmode

B.getsecconf 

C.tcbck -display

D.odmget -q attribute=TCB_STATE PdAt

Answser: D

QUESTION NO 35: A system administrator is creating four LPARs on a Power 550. ThePower 550 has 64GB of memory installed and 32GB activated. The system administrator

sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating

three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the

problem?

A.The Power 550 is licensed for three LPARs only.

B.There is not enough memory to meet the minimum dedicated memory requirement for the

fourth LPAR. A faulty memory DIMM is detected in the POWER5 550.

Page 15: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 15/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

C.There is not enough memory to meet the minimum dedicated memory requirement for the

fourth LPAR. The HMC reserves some memory to perform logical partition tasks.

D.There is not enough memory to meet the minimum dedicated memory requirement for the

fourth LPAR. The hypervisor reserves some memory to perform logical partition tasks.

Answser: D

QUESTION NO 36: IBM remote support for hardware maintenance is required for several

mission critical Power 595 servers. The data center is very security conscious and does not

allow internet access. How should an administrator configure outbound connectivity of 

Electronic Service Agent?

A.VPN

B.Modem

C.Private LAN

D.Pass-through systems

Answser: B

QUESTION NO 37: What must an administrator do to prevent new telnet users from

connecting to the system?

A.rmdev -l /dev/pts

B.touch /etc/nologin

C.chdev -l sys0 -a nologin

D.chuser -a login=false ALL

Answser: B

Page 16: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 16/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 38: During an attempt to 'scp' between two hosts, an error indicating

PRNG is not seeded is

displayed. What is the likely cause of the error?

A.The sshd user id is locked.

B.The /var/empty directory needs to be created.

C.PRNG is set to 'no' in the /etc/ssh/sshd_config file.

D.The permissions on /dev/random and /dev/urandom are incorrect.

Answser: D

QUESTION NO 39: Which system provides redundant system clocks?

A.Power 595

B.Power 560

C.Power 570

D.Power 550

Answser: A

QUESTION NO 40: How can the administrator use file 'a' containing '-El sys0' to view the

attributes of a device?

A.lsdev -fv a

B.lsattr -f a

C.lsattr | `cat a`

D.lsdev -Cc | cat a

Page 17: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 17/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

Answser: B

QUESTION NO 41: A filesystem failed to successfully mount, indicating the errormessage: 0506-324 -cannot mount media not formatted or invalid format 0506-342

-Superblock is dirty run fsck Which parameter can be passed to the fsck command to

automatically take any remedial action required?

A.-p

B.-y

C.-f 

Answser: B

QUESTION NO 42: Which method will configure an e-mail notification when permanent

hardware errors are logged in the errorlog?

A.Create or update the errnotify stanza in the ODM.

B.Update errpt daemon configuration file /etc/errpt.conf.

C.Update errpt daemon configuration file /var/adm/errpt.conf.

D.Define a notification alias in the /etc/syslog.conf file with the *.error stanza

Answser: A

QUESTION NO 43: Which command shows dump components and controls live dump

attributes?

A.dumpctrl

B.sysdumpdev

C.livedumpdev

D.livedumpctrl

Page 18: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 18/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

Answser: B

QUESTION NO 44: Which command will create a group called 'delivery' and set the

administrators to 'john' and 'mary'?

A.mkgroup -A=john,mary delivery

B.groupadd -A=john,mary delivery

C.mkgroup adms=john,mary delivery

D.groupadd adms=john,mary delivery

Answser: C

QUESTION NO 45: Which of the following is the correct command to document a Power

Systems server using sysplan?

A.mksysp -m Server-9117-MMA-SN10FC123 > Server-9117-MMA-SN10FC123.sysplan

B.mksysplan -f Server-9117-MMA-SN10FC123.sysplan -m

Server-9117-MMA-SN10FC123

C.sysplan -new Server-9117-MMA-SN10FC123.sysplan -m

Server-9117-MMA-SN10FC123

D.sysplancreate -m Server-9117-MMA-SN10FC123.sysplan -f 

Server-9117-MMA-SN10FC123

Answser: B

QUESTION NO 46: Which command will list the top 5 memory intensive processes?

A.lsmem -pu 5 B.lsps -psu 5 C.svmon -Put 5 D.ps -au | sort -rn +4 | head -5

Answser: C

Page 19: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 19/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 47: An administrator is supporting an AIX 6.1 LPAR remotely and needs

a tape operator to plug a cable into an Ethernet adapter. The tape operator does not have

POWER6 595 knowledge. What can the administrator do to assist the tape operator to locatethe correct adapter?

A.Advise the tape operator to review the hardware service guide.

B.Use the diag command to set the Ethernet adapter slot LED to flash.

C.Advise the tape operator to check the WWN stickers of all Ethernet adapter in the I/O

drawers.

D.Create a login account for tape operator on the HMC and advise the tape operator to

locate the adapter using the GUI step by step.

Answser: B

QUESTION NO 48: A previously functional, scheduled snapshot operation against a JFS2filesystem has failed. The JFS2 filesystem is mounted and appears intact. What is the most

likely cause of the failure and how should it be resolved?

A.The associated JFS2 log device has failed. Check the log device and varyon the device.

B.The logical volume that hosts the snapshots is full. Increase the size of the logical volume.

C.Fifteen snapshots already exist for the given JFS2 filesystem. Delete at least one existing

snapshot.

D.The volume group that hosts both the snapshots and JFS2 filesystem has lost quorum.

Check and correct the integrity of the volume group.

Answser: C

QUESTION NO 49: Which command should be used to capture network traffic between

the localhost and a host named 'webserver'?

A.tcpdump webserver

Page 20: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 20/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

B.tcpdump host webserver

C.tcpdump -hostname webserver

D.tcpdump -print -h webserver

Answser: B

QUESTION NO 50: A system is being booted into maintenance mode due to root

password recovery. After accessing the root volume group and starting a shell without

mounting the file systems, what is the next step?

A.Delete root's password from the /etc/security/passwd file.

B.Use the diag recovery tool option to reset root's password.

C.Execute the 'passwd' command and assign a new passwd to root UID.

D.Mount the / and /usr filesystems on alternative mount points to edit the password file.

Answser: D

QUESTION NO 51: Which command will allow an administrator to view the primary and

secondary dump devices?

A.sysdumpdev -l

B.dumpmgr -ALL

C.lsdev -Cc dump

D.diag -dump=show

Answser: A

QUESTION NO 52: Which command should an administrator use to view files and volume

group backup information from a mksysb called server1.mksysb that is found in /backups?

A.lsmksysb -l /backups/server1.mksysb

B.showmksysb -f /backups/server1.mksysb

C.listvgbackup -f /backups/server1.mksysb

Page 21: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 21/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

D.showvgbackup -l /backups/server1.mksysb

Answser: C

QUESTION NO 53: During a NIM install, the system stops with the LED code 611. What

is the cause of the issue?

A.A failure to NFS mount filesystems from the NIM client

B.A failure to NFS mount filesystems from the NIM master

C.A failure to retrieve the tftp client info from the NIM master

D.A failure to retrieve the tftp server info from the NIM master

Answser: B

QUESTION NO 54: Which smit fastpath should be used to configure Link Aggregation on

a server?

A.tcpip

B.linkAgg

C.failover

D.etherchannel

Answser: D

QUESTION NO 55: The virtual disk hdisk12 has multiple paths. The disk belongs to

volume group vg01. The volume group is currently in use.

Which command will remove the path connected to vscsi0?

A.rmdev hdsik12 vscsi0rmdev ? hdsik12 ? vscsi0

B.rmpath hdisk12 vscsi0rmpath ? hdisk12 ? vscsi0

Page 22: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 22/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

C.chpath hdisk12 vscsi0 -dchpath ? hdisk12 ? vscsi0 -d

D.varyoffvg vg01; rmdev hdisk12 vscsi0 varyoffvg vg01; rmdev ? hdisk12 ? vscsi0

Answser: B

QUESTION NO 56: What are the steps required to perform a Preservation install on a

server?

A.Shutdown the server and boot it into SMS.

Select SMS menu option OS Upgrade, Preservation install for the install type, and allow

upgrade to run.

B.Shut down the server and perform a network boot from a local NIM

server.

Select Preservation install for the install type, and allow upgrade to run.

C.Shutdown the server and boot it into SMS.

Select SMS menu option OS Upgrade, Preservation install for the install type, and allow for

upgrade to run.

D.Re-boot the server and NFS mount the bos images from a local NIM server.

Run smit install.

Select Preservation install for the install type, and allow upgrade to run.

Answser: A

QUESTION NO 57: Where is the run date for an 'at' job located?

A.Within the job environment set up

B.Within the user data of the at job

C.In the file name preceeded with a userid

Page 23: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 23/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

D.In a special file used by the cron daemon

Answser: A

QUESTION NO 58: While running 'lsvg -l rootvg', an administrator notices that the

quantity of LPs and PPs are different. What is the likely cause?

A.The LPs represent a section of logical storage that can be mapped to multiple PPs.

B.The PPs represent the mapping to the physical disk. There will always be either equal or

fewer PPs than LPs.

C.The LPs represent a section of logical storage that is mapped to a PP that spans over

multiple physical disks.

D.The LP represents a section of logical storage. This is mirrored on the filesystem level

which creates a greater number of PPs.

Answser: A

QUESTION NO 59: An administrator wants to restore the /etc/resolv.conf file from a

mksysb backup onto server1. After the mksysb is mounted in /mnt/backup/ from the local

nim server, which command should be run to restore the file?

A.tar -xvf /mnt/backup/server1.mksysb ./etc/resolv.conf B.restore -Tvf 

 /mnt/backup/server1.mksysb ./etc/resolv.conf C.listvgbackup -f 

 /mnt/backup/server1.mksysb -r ./etc/resolv.conf D.restorevgfiles -xrm

  /mnt/backup/server1.mksysb ./etc/resolv.conf 

Answser: C

QUESTION NO 60: Prior to installing a new system, an administrator needs to provide the

SAN administrators with the WWN of the fibre channel cards to allow them to allocate andzone bootable storage. Due to the lack of installed operating system, the administrator will

Page 24: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 24/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

use a bootable diagnostic CD. Which option within the diag utility will display the required

information?

A.Task Selection > Display Hardware Vital Product Data

B.Advanced Diagnostic Routines > Display Resource Attributes

C.Diagnostic Routines > Display Configuration and Resource List

D.Task Selection > Display Multipath I/O (MPIO) Device Configuration

Answser: A

QUESTION NO 61: Which command identifies broken or missing filesets?

A.lppchk -v

B.oslevel -chk 

C.bffstate -int

D.geninstall -lsstate

Answser: A

QUESTION NO 62: A system is experiencing name resolution issues. The administrator

has verified that /etc/resolv.conf is suitably configured using correct syntax. However,

processes run by non-root users are failing to resolve any hostnames to IP addresses with the

error 'No response from server'. Which tool will help trace the nslookup command in an

attempt to investigate the problem?

A.kdb

B.dbx

Page 25: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 25/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

C.trace

D.truss

Answser: D

QUESTION NO 63: How can the administrator display the boot paths from

which AIX can boot?

A.bootinfo -r

B.lspath -boot

C.bosboot -ad hdisk0

D.bootlist -m normal -rv

Answser: D

QUESTION NO 64: An administrator is trying to extend an existing volume group with a

new hard disk, but the extendvg command returns the following error: 0516-1162

 /usr/sbin/extendvg: Warning, The Physical Partition Size of 64 requires the creation of 8924

partitions for hdisk11. The limitation for volume group datavg is 1016 physical partitions

per physical volume. Use chvg command with -t option to attempt to change the maximum

Physical Partitions per Physical volume for this volume group. The chvg -t may or may not

allow the extendvg command to succeed. What is the implication of using this option?

A.It reduces the maximum file size allowed within the given volume group.

B.It reduces the maximum number of files allowed within the given volume group.

C.It reduces the maximum number of logical volumes allowed within the given volume

group.

D.It reduces the maximum number of physical volumes allowed within the given volume

Page 26: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 26/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

group.

Answser: D

QUESTION NO 65: For NIM to install client machines located in a non-adjacent network,

which routing must be defined?

A.Boot/install servers will be required on each intermediate network.

B.When an install is initiated by the client, routing is only required from the LPAR back to

the NIM master.

C.When an install is initiated by the NIM master, routing is only required from the NIM

master to the client.

D.Appropriate network NIM resources need to be defined to the NIM master to allow

routing in both directions.

Answser: D

QUESTION NO 66: A user has written a script that is not running correctly and asks an

administrator for help. Without adding anything to the script, how can the administratordetermine the cause of the problem?

A.Run the script with an 'sh -x' in front.

B.Run the script with a 'ksh -v' in front.

C.Type debug into the command line before running the script.

D.Type 'set -x' into the command line before running the script.

Answser: A

QUESTION NO 67: A log logical volume is created as indicated below: root@host1:/#

mklv -a c -t jfs2log -b y datavg 1 loglv00 root@host1:/# lsvg -l datavg datavg: LV NAME

TYPE LPs PPs PVs LV STATE MOUNT POINT loglv00 jfs2log 1 1 1 closed/syncd N/A A

new filesystem is then created using the new log logical volume. When the administrator

attempts to mount the filesystem, the following error occurs: root@host1:/# mount /newfs

mount: 0506-324 Cannot mount /dev/lv00 on /newfs: A system call received a parameter

that is not valid. Which of the following actions will resolve this error?

Page 27: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 27/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A.Recreate the file system with -p rw flags and re-mount.

B.Run 'logform /dev/loglv00' and hit 'y' to destroy all data.

C.Run 'clrginfo -p' to clear the invalid filesystem parameter.

D.Change 'account = true' value in /etc/filesystem to 'account = false'.

Answser: B

QUESTION NO 68: An administrator wants to test the performance of an application at

different memory sizes. What is the most effective way to perform the test and collect

statistical information for each test? A.Run DLPAR to change the LPAR memory for each

test.

B.Run rmss command to simulate different memory for each test.

C.Run chdev command to limit the system memory size for each test.

D.Run chattr command to limit the system memory size for each test.

Answser: B

QUESTION NO 69: What is the objective of the superstrict option that can be used when

creating mirrors?

A.Allows the mirror partitions to spread across a maximum number of disks.

B.Allows the copy of a partition to be on the same physical volume as the mirrored partition.

C.Prevents partitions allocated to one logical volume mirror from sharing a physical volume

with partitions from another logical volume mirror.

D.Forces copies of logical partitions to be housed on different physical volumes, while

allowing a single physical volume to be shared by logical volume mirrors.

Answser: C

QUESTION NO 70: Which of the following will identify the largest file in a given

Page 28: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 28/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

filesystem?

A.df -r /<filesystem> | sort -rn +4

B.ls -lR /<filesystem> | sort -rn +1

C.fuser -f /<filesystem> | sort -rn +6

D.find /<filesystem> -type f -xdev -ls | sort -rn +6

Answser: D

QUESTION NO 71: A SAN needs to undergo disruptive maintenance, which will effect a

hosted production system with multiple applications and related volume groups, one of 

which, datavg, resides on the SAN. There is one spare disk in the system but it is smaller

than datavg. How can application outages and risk of corruption be minimized?

A.Stop the applications in all data volume groups and shut the system down during the

outage period.

B.Stop the applications in datavg, unmount all datavg filesystems, varyoff datavg, and

export datavg.

C.Stop the applications in datavg, unmount all datavg filesystems, and reduce datavg by the

SAN disks.

D.Use the 'cpvg' command with the -z option to copy and compress datavg to different

physical volumes.

Answser: B

QUESTION NO 72: Which command will purge the errorlog of all recorded occurrences

of a given SRN?

A.errclear 0

B.errpt -r -j <SRN>

Page 29: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 29/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

C.errclear -j <SRN>

D.errclear -k <SRN>

Answser: C

QUESTION NO 73: Which files can be used together to allow remote command execution

on a server?

A./etc/.rhosts and $HOME/hosts.equiv

B./etc/hosts.equiv and $HOME/.rhosts

C./etc/rhosts.equiv and $HOST/.rhosts

D./etc/hosts.equiv and $HOME/.hosts.equiv

Answser: B

QUESTION NO 74: How should TCP/IP be configured on the ent0 network adapter?

A.ifconfig en0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254

B.ifconfig ent0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254

C.mktcpip test61 -a 192.168.10.1 -i en0 255.255.255.0 192.168.10.254 -smktcpip ? test61 -a

192.168.10.1 -i en0 ? 255.255.255.0 ? 192.168.10.254 -s

D.mktcpip test61 -a 192.168.10.1 -i ent0 255.255.255.0 192.168.10.254 -smktcpip ? test61

-a 192.168.10.1 -i ent0 ? 255.255.255.0 ? 192.168.10.254 -s

Answser: C

QUESTION NO 75: What are the minimal resources to perform a NIM BOS install?

Page 30: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 30/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A.spot, lpp_source B.mksysb, lpp_source

C.boot, bundle, nim_script

D.aix disks, spot, lpp_source

Answser: A

QUESTION NO 76: A system has a mirrored data volume group that has a filesystem /data

of 10 logical partitions. How many physical partitions will the filesystem have?

A.1

B.2

C.10

D.20

Answser: D

QUESTION NO 77: Which is a supported method to upgrade firmware on an IBM Power

Systems 570?

A.Use the /usr/sbin/invscout AIX command.

B.Use the 'Updates' panel on the managing HMC.

C.Boot the 570 using an IBM-provided microcode CD.

D.Use the /usr/lpp/diagnostics/bin/update_flash AIX command.

Answser: B

QUESTION NO 78: A server is experiencing performance issues and the SAN could be a

potential bottleneck.

Page 31: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 31/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

Which command will show the queue depth of hdisk1?

A.lspv hdisk1

B.lscfg hdisk1lscfg ? hdisk1

C.lsdev c hdisk1lsdev ?c hdisk1

D.lsattr l hdisk1lsattr ?l hdisk1

Answser: D

QUESTION NO 79: An administrator learns that users are unable to login to a server via

ssh. After making a telnet connection to the server, how can the administrator check the

status of the sshd subsystem?

A.lssys -a com

B.lssys -a sshd

C.lssrc -s sshd

D.lssrc -s tcpip

Answser: C

QUESTION NO 80: An administrator wants to run topas as their own userid but gets the

following error when trying: user1>$ topas topas: Unable to initialize Spmi interface Spmi:

Error 13 opening file /etc/Spmi_shm_hook Which of the following is the most likely cause

of the error?

A.The /dev/kmem file must be at 777 permissions.

B.The administrator is using other shell than ksh.

C.The number of pipe handles at /etc/tunables is too low.

D.The topas command must be run with root at least once previously.

Answser: D

QUESTION NO 81: An administrator needs to configure a server (192.168.22.22) as a

temporary solution for an NTP master that has stopped working. What is the process forconfiguring the NTP master?

Page 32: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 32/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A.Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line

'fudge

127.127.1.0 stratum 0', and then refresh the daemon.

B.Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line'master

127.127.1.0 stratum 0', and then refresh the daemon.

C.Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the

line 'fudge 192.168.22.22 stratum 0', and then refresh the daemon.

D.Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the

line 'master 192.168.22.22 stratum 0', and then refresh the daemon.

Answser: C

QUESTION NO 82: An administrator is moving a volume group from one server to

another. The disks will be physically moved between the two systems. Which two

operations are required on the volume group prior to the physical disk switch?

A.'varyoffvg' and 'exportvg'

B.'varyofflv' and 'importvg'

C.'varyofflv' and 'migratepv'

D.'varyoffvg' and 'migratevg'

Answser: A

QUESTION NO 83: During system boot, rootvg fails to vary on, causing an LED code of 

0552. What is the most likely cause for rootvg not varying on?

A.Missing blv

B.Network problem

C.Wrong boot table

D.Corrupted file system

Page 33: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 33/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

Answser: D

QUESTION NO 84: The system administrator is making system wide changes to a server,

which will add to the PATH variable for the server environment. Where is the PATH

variable found for the system?

A./profile

B./etc/envpath

C./etc/profile

D./etc/environment

Answser: D

QUESTION NO 85: During which phase of the boot process is the rootvg volume group

varied on and the root file system (hd4) checked?

A.Boot phase 1

B.Boot phase 2

C.Boot phase 3

D.Boot phase 4

Answser: B

QUESTION NO 86: An administrator has recently added a VLAN to the VIO server and

wants to update the documentation. Which command displays the current VIO server

VLAN configuration?

A.lsmap -all

B.lsmap -net

C.lsmap -ent

Page 34: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 34/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

D.lsmap -vlan

Answser: B

QUESTION NO 87: An application fails to start after a Technology Level upgrade. The

application vendor recommends that two filesets upgraded as part of the new Technology

Level be rejected. What is the recommended method for performing this task?

A.Run instfix -u to reject the filesets.

B.Run installp -r to reject the filesets.

C.Run installp -u to uninstall the filesets.

D.Restore the system to previous state from the system backup.

Answser: D

QUESTION NO 88: AIX shows the boot order in the following output: hdisk0 hdisk1

blv=hd5 cd0 What will

happen when the system administrator reboots the server?

A.The server will boot from cd0

B.The server will boot from hdisk0.

C.The server will boot into SMS mode

D.The server will boot from hdisk1.

Answser: D

QUESTION NO 89: An administrator is testing the alt_disk_copy command and has

cloned the active rootvg volume group. The copied volume group is spread across 2 disks. #

lspv hdisk0 00006091aef8b687 old_rootvg hdisk1 00076443210a72ea rootvg hdisk2

0000875f48998649 old_rootvg Which command will identify the boot disk for the cloned

volume group?

A.bootlist -m normal -o

B.bootlist -m alternate -o

Page 35: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 35/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

C.alt_rootvg_op -q -d hdisk0

D.alt_rootvg_op -b -v old_rootvg

Answser: C

QUESTION NO 90: Which command will activate a defined paging space?

A.swapon paging01

B.chps y paging01chps ? y paging01

C.mkps /dev/paging01mkps ? /dev/paging01

D.swap /dev/paging01swap ? /dev/paging01

Answser: A

QUESTION NO 91: Which presents the heirarchical relationship

between LVM entities?

A.Volume Group > Physical Volume > Logical Volume > Filesystem

B.Physical Volume > Volume Group > Logical Volume > Filesystem

C.Volume Group > Physical Volume > Filesystem > Logical Volume

D.Physical Volume > Volume Group > Filesystem > Logical Volume

Answser: A

Page 36: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 36/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 92: After the /etc/tunables/nextboot file has been edited, which command

can be used to validate changes to the IO performance tuning settings?

A.ioo -v nextboot

B.ioo -c nextboot

C.valcheck -f nextboot

D.tuncheck -r -f nextboot

Answser: D

QUESTION NO 93: Which command will remove the 'stale' status from a logical volume?

A.syncvg -p

B.syncvg -l

C.synclv -p

D.synclv -l

Answser: B

QUESTION NO 94: Which command displays the number of packets transmitted for each

NIC available on the system?

A.entstat -v

B.netstat -i

C.entstat -aon

D.netstat -na

Answser: B

Page 37: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 37/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 95: An administrator wants to host several LPARs on a JS23 Blade server.

To achieve this what additional management software is required?

A.HMC B.IVM

C.VIOS

D.IBM

Director

Answser: C

QUESTION NO 96: Which communication protocols are valid between the NIM master

and standalone clients?

A.shell and ldap

B.shell and nimsh

C.shell and kerberos

D.shell, nimsh and ldap

Answser: B

QUESTION NO 97: The server host1 has been set up as a backup system with the

following /etc/exports:

 /backups -rw How can a second server regularly use this disk space?

A./usr/sbin/mkfs -s 8G -o nbpi=2048,frag=512 /dev/lv00 -b -l host1

B./usr/sbin/crnfsmnt -d /backups -l /backups host1 -R -X -v -S -b bg

C./usr/sbin/mknfsmnt -f /backups -d /backups -h host1 -a -S -t rw -w bg -g

Page 38: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 38/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

D./usr/sbin/crfs -v nfs -g vg1 -A yes -p rw -m /backups -a logname=/dev/lv00

Answser: C

QUESTION NO 98: An administrator wants to do a backup of the HMC but sees that there

are two options on the HMC menu: Backup Critical Console Data and Save Upgrade Data.

Which of the following describes the differences between the two options?

A.The ave Upgrade Data?should be performed prior to updating HMC software. The ackup

Critical Console Data?should be performedThe ?ave Upgrade Data?should be performed

prior to updating HMC software. The ?ackup Critical Console Data?should be performed

whenever configuration changes are made to the HMC.

B.The ave Upgrade Data?should be performed prior to updating the Operating System on an

LPAR. The ackup Critical Console Data?The ?ave Upgrade Data?should be performed prior

to updating the Operating System on an LPAR. The ?ackup Critical Console Data should be

performed prior to changing the network topology.

C.The ackup Critical Console Data?should be performed prior to updating HMC software.

The ave Upgrade Data?should be performedThe ?ackup Critical Console Data?should be

performed prior to updating HMC software. The ?ave Upgrade Data?should be performed

whenever any managed hardware configuration is changed or upgraded.

D.The ackup Critical Console Data?should be performed prior to making changes to Service

Agent or Service Focal Point. The aveThe ?ackup Critical Console Data?should be

performed prior to making changes to Service Agent or Service Focal Point. The ?ave

Upgrade Data?should be performed prior to changing the network topology.

Answser: A

QUESTION NO 99: While attempting to expand a file system, an administrator receives an

error message indicating that the filesystem is not recognized. Running the 'lsfs' command

fails to display any output, but the 'df' command is working and displays normal filesystems.

What is the likely cause of the problem?

A.The /etc/filesystems file is missing.

B.The /dev/hd8 logical volume is corrupt.

C.The hosting volume group is not varied on.

D.The /var and /tmp filesystems may be full.

Page 39: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 39/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

Answser: A

QUESTION NO 100: Which command will enable RBAC on a server?

A.setkst -t enable ; reboot

B.chrbac -a enable ; reboot

C.enable enhanced_RBAC ; reboot

D.chdev -l sys0 -a enhanced_RBAC='true' ; reboot

Answser: D

QUESTION NO 101: An administrator analyzes a poorly performing system and suspects

that the issue is related to CPU resource. Upon reviewing output of vmstat, the administratoris concerned with the values in the 'pc' and 'ec' columns. Which definition describes these

two headings?

A.'pc' refers to the number of physical processors consumed, while 'ec' refers to the

percentage of entitled capacity consumed.

B.'pc' refers to the 'physical CPUs' and lists how many are left un-allocated, while ec' refers

to the 'entitled CPUs' and lists what amount is currently allocated to the LPAR.

C.'pc' refers to the 'processor count' and reflects how many CPUs are allocated to the LPAR,

while 'ec' refers to the 'extra capacity' and lists how much above the LPAR entitlement is

being consumed.

D.'pc' refers to 'processor cards' and reflects how many MCM modules are actually being

used by this LPAR, while 'ec' refers to the 'entitled CPUs'"" and lists what amount is

currently allocated to the LPAR.

Answser: A

QUESTION NO 102: A client has a temporary deployment of a new static application thatneeds to run for a short period of time and is not going to change. How can this deployment

Page 40: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 40/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

be achieved with a minimum of effort and time?

A.Run a system WPAR and deploy the application.

B.Create a new LPAR and deploy the application.

C.Create an application WPAR to deploy the application.

D.Create an LPAR hosted by a VIO server and deploy the application.

Answser: C

QUESTION NO 103: A customer needs to create a number of LPARs on a new POWER6

server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual

Ethernet via a VIO server. Which limitation must be considered when planning the system

configuration?

A.A VIO server requires a dedicated LHEA port.

B.There is a limit of 32 LPARs per virtual LAN.

C.Two VIO servers will be required. A single VIO server can only provide virtual storage or

virtual Ethernet.

D.Two VIO servers will be required. One to provide virtual networking and another to

provide dedicated networking.

Answser: A

QUESTION NO 104: Which procedure should be used to configure the system to prevent

all users from using the 'at' command?

A.Create a /var/adm/cron/at.allow file with no entries

B.Create a /var/adm/cron/at.deny file with '*' as the only entry

C.Create a /var/adm/at/at.deny file with 'ALL' as the only entry

D.Create a /var/adm/at/at.allow file with 'NONE' as the only entry

Answser: A

Page 41: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 41/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 105: The IP address of POWER6 595 is showing up in the HMC instead

of the server name. Next to the IP address is the status, which shows ailedThe IP address of 

POWER6 595 is showing up in the HMC instead of the server name. Next to the IP address

is the status, which shows ?ailed Authentication? The system administrator needs to enter a

password. Which password is needed to restore connection for the POWER6 595 to theHMC?

A.The hscroot user password.

B.The CE password.

C.The HMC password.

D.The ASM admin password.

Answser: C

QUESTION NO 106: An administrator notices that some of their systems are reporting a

number in the eferred Level?column on the HMC pdates?panel. WhatAn administrator

notices that some of their systems are reporting a number in the ?eferred Level?column on

the HMC ?pdates?panel. What is the meaning of the eferred Level?is the meaning of 

the ?eferred Level?

A.The number denotes the firmware level which will be activated when AIX is next

rebooted.

B.The number denotes the firmware level which will be activated when all LPARs are next

started.

C.The number denotes the firmware level which will be activated when the managed system

is next restarted.

D.The number denotes how many days have elapsed since the firmware was installed

without the LPARs being reactivated.

Answser: C

QUESTION NO 107: The output of the s?command displays the following: The output of 

the ?s?command displays the following: F S UID PID PPID C PRI NI ADDR SZ TTY

TIME CMD 120005 A 0 40931 39241 2 67 20 1b23 201 pts/0 0:00 scriptA 100023 A 0

34596 23441 4 69 20 a328 341 pts/0 0:00 scriptB What must be done to ensure scriptB

receives dispatching priority over scriptA?

Page 42: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 42/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A.Run 'nice' command to increase the the NI value of scriptB.

B.Run 'nice' command to increase the the NI value of scriptA.

C.Run 'renice' command to increase the the NI value of scriptB.

D.Run 'renice' command to increase the the NI value of scriptA.

Answser: C

QUESTION NO 108: While configuring a new adapter using cfgmgr, an administrator

receives a warning message indicating that some device packages are not installed.

Additionally, the adapter displays in the Defined state. Which command will resolve the

issue and make the adapter available?

A.shutdown -Fr

B.cfgmgr -i <lpp_source>

C.mkdev -l <device_name>

D.mknode /dev/<device_name>

Answser: B

QUESTION NO 109: Running the s?command provides the following output: Running

the ?s?command provides the following output: PID TTY STAT TIME PGIN SIZE RSS

LIM TSIZ TRS %CPU %MEM COMMAND 22752 -A 0:08 2611 1960 3980 6276 4652 20

0.0 0.0 /usr/bin/find 20700 -A 0:07 2712 1868 2906 6379 950 28 0.0 0.0 /usr/dt/b What is

the amount of RAM, in kilobytes, used for the text and data segments for the 'find'

command?

A.1960

B.3980

C.2611

D.4652

Answser: B

QUESTION NO 110: Which single compound 'chmod' command would achieve the same

Page 43: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 43/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

result as these four commands? chmod g-w mydir chmod o-w mydir chmod g+x mydir

chmod o+x mydir A.chmod go+w mydir

B.chmod go-w mydir

C.chmod go-w-x mydir

D.chmod go-w+x mydir

Answser: D

QUESTION NO 111: An administrator is configuring an LPAR for a NIM installation and

is unsure if the 'Ping Test' option within SMS is a required configuration step. Which

statement best describes the 'Ping Test' option?

A.The 'Ping Test' is a recommended step to verify the IP information entered into the RIPL

SMS panel.

B.The 'Ping Test' is a mandatory step required to commit the IP information entered into the

RIPL SMS panel.

C.The 'Ping Test' is an optional step to verify network configuration entered into the RIPLSMS panel on older copper-based networks.

D.The 'Ping Test' is an optional step to verify network connectivity between client and

server, where ICMP traffic is allowed on the connecting network.

Answser: D

QUESTION NO 112: An administrator trying to restore a backup from tape encounters

read errors. The administrator suspects that it could be an issue with the block device. What

is the appropriate method to resolve this issue?

A.Set the block size to 0.

B.Read the tape using the tctl command.

C.Use the 'cpio' command to override tape device settings.

D.Run the 'dd' command to identify the block size from the tape.

Answser: A

Page 44: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 44/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 113: What is the correct command for creating a new user ID

authenticated with LDAP?

A.mkuser -R LDAP <new uid>

B.mkuser -L LDAP <new uid>

C.mkuser -auth LDAP <new uid>

D.mkuser -a auth1=LDAP <new uid>

Answser: A

QUESTION NO 114: On which product media can the IVM install code be located?

A.Base AIX Install media.

B.Base VIOS Install media.

C.AIX Expansion Pack media.

D.VIOS Expansion Pack media.

Answser: B

QUESTION NO 115: An administrator wants to have the flexibility to dynamically move a

fibre channel PCI card between given LPARs. For each given LPAR how should they add

the PCI card to the LPAR profile?

A.Add the fibre channel card as hared?Add the fibre channel card as ?hared?

B.Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?

C.Add the fibre channel card as esired?Add the fibre channel card as ?esired?

D.Add the fibre channel card as equired?Add the fibre channel card as ?equired?

Answser: C

QUESTION NO 116: Which command displays the contents of the /var/adm/wtmp file?

A.view

Page 45: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 45/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

B.strings

C./usr/sbin/viwtmp

D./usr/sbin/acct/fwtmp

Answser: D

QUESTION NO 117: Which command should an administrator use to put a system in

maintenance mode without rebooting?

A.init 0

B.telinit m

C.shutdown -FM

D.sh /etc/rc.maint

Answser: B

QUESTION NO 118. Which command restores files from a volume group backup on a

specified media?

A.mksysb -r

B.savevg -r

C.restorevg -rD.restorevgfiles

Answer: A

QUESTION NO 119. Which of the following can an operator use to shutdown a system

into single-user mode?

A.shutdown -d

B.shutdown -s

C.shutdown -m

D.shutdown -Fr -s 1

Answer: C

QUESTION NO 120. A non-root user can run rsh commands from serverA to serverB, but

attempts to run rsh commands by the root user return with a permission error message. What

action will resolve the problem?

A.Add root user to the /etc/hosts.equiv on serverB.

Page 46: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 46/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

B.Create $HOME/.rhosts file for the root user on serverB.

C.Restart the rshd daemon with root enabled option on serverB.

D.Add entry to allow root user from serverA to the /etc/hosts.allow on serverB.

Answer: D

QUESTION NO 121. A recently installed package needs to be rolled back to a previous

version. Which of the following commands will perform the task?

A.reject

B.cleanup

C.deinstall

D.uninstall

Answer: A

QUESTION NO 122. How can a JFS2 filesystem be added to a volume group that has

insufficient space to host a log LV?

A.Create the filesystem with an inline log.

B.Create the filesystem referring to the jfs2log in rootvg.

C.Create the filesystem and format the logical volume with 'logform'.

D.Create the filesystem's underlying logical volume with an inline log.

Answer: C

QUESTION NO 123. Which of the following allows multiple applications to share a single

operating system resource?

A.Logical Partition

B.Workload Partition

C.Dynamic Logical Partition

D.Shared Processor Logical Partition

Answer: B

QUESTION NO 124. When ordering a new IBM Power Systems server, a customer is

given the option of two types of Hardware Management Console: 7042-CR4 and 7042-C06.

Which main difference between the options would influence the customer's decision?

A.The 7042-CR4 is a rack mounted model, compared to the 7042-C06, which is a desktop.

B.The 7042-CR4 is limited to 16 managed systems, compared to a limit of 32 for the

Page 47: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 47/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

7042-C06.

C.The 7042-C06 has faster CPUs and twice the RAM compared to the 7042-CR4, which is

suited to large enterprise deployments.

D.The 7042-C06 can manage POWER5-based hardware, in addition to POWER6, while the7042-CR4 can only manage POWER6-based hardware.

Answer: C

QUESTION NO 125. Which port must be open on the HMC to allow remote web access?

A.22

B.80

C.443

D.8080

Answer: C

QUESTION NO 126. Which are the two main uses of a VIO server?

A.Virtualize network and memory to LPARs.

B.Virtualize network and storage to LPARs.

C.Virtualize memory and processors to LPARs.

D.Virtualize storage and processors to LPARs.

Answer: B

QUESTION NO 127. Which POWER6 virtualization technology is the minimum to enable

multiple shared processor pool

functionality?

A.PowerHA Standard Edition

B.PowerVM Standard Edition

C.Power6 Management Edition

D.Power6 Virtualization Edition

Answer: B

QUESTION NO 128. What is the minimum amount of memory required for a new LPAR

to be built via NIM on AIX6.1?

A.128 MB

B.256 MB

Page 48: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 48/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

C.512 MB

D.1024 MB

Answer: B

QUESTION NO 129. What is the theoretical maximum number of logical ports that a one

port of a 2-port 10Gb IVE can provide if no VIO Server is connected to the IVE?

A.2

B.4

C.8

D.16

Answer: D

QUESTION NO 130. An administrator wants to deploy a complex LPAR environment on

a 595.

What is the most current tool available for documenting the proposed LPAR configuration

and determining if there are adequate IO resources?

A.LPAR Planning Tool.

B.System Planning Tool.

C.LPAR Validation Tool.

D.System Validation Tool.

Answer: B

QUESTION NO 131. Where will an administrator find documents in PDF format that

include detailed architecture and step-by-step installation instructions for Power servers?

A.AIX Fix Central

B.IBM Developer Works

C.IBM Systems Software Information Center

D.IBM Systems Hardware Information Center

Answer: D

QUESTION NO 132. Which of the following is a situation where dual (redundant) HMCs

are recommended?

A.When managing more than four VIO servers.

B.When installed with Power 570 and larger hardware.

Page 49: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 49/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

C.When hosting both Linux and AIX on the same physical hardware.

D.When unexpected outage on a single HMC would prove an untenable risk for the hosted

LPARs.

Answer: D

QUESTION NO 133. A customer has a requirement for a single AIX LPAR to be highly

available. The customer only has enough funding to purchase a single system.

Which would be the most critical option to mitigate AIX availability?

A.Dual power supplies.

B.Twice the amount of disk.

C.Two dual-port LHEA adapters.

D.Two dual-port fibre channel adapters.

Answer: A

QUESTION NO 134. What is the difference between the CUoD and Utility Capacity On

Demand?

A.Utility allows for activation of resources by the hour. CUoD allows for permanent access

to additional resources installed into the system.

B.Utility allows for permanent access to additional resources installed into the system.

CuOD allows for activation of resources by the hour.

C.Utility allows for activation of resources by the minute. CUoD allows for permanent

access to additional resources installed into the system.

D.Utility allows for a 30 day usage of additional resources installed into the system. CUoD

allows for permanent access to additional resources installed into the system.

Answer: C

QUESTION NO 135. An administrator plans to use bootable AIX media to boot a system

into maintenance mode.

The system is running AIX 5.3 TL09 with a 64-bit kernel. The administrator has a selection

of media available.

Which media should the administrator use?

A.Any AIX bootable media, providing it is a 64-bit variant

B.Any AIX bootable media, providing it is AIX 5.1 or later

C.Any AIX 5.3 bootable media, providing it is TL09 or later

Page 50: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 50/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

D.Any AIX 6.1 bootable media, providing it is TL02 or later

Answer: C

QUESTION NO 136. In which file created by a mksysb would an administrator findfilesystem and logical volume information?

A./fs.data

B./image.data

C./bosinst.data

D./install.data

Answer: B

QUESTION NO 137. Which command can be used to show volume group information

about filesystems and OS levels for a specified mksysb called server1.mksysb?

A.lsmksysb -lf server1.mksysb

B.restore -mrT server1.mksysb

C.listbackup -fT server1.mksysb

D.listvgbackup -l server1.mksysb

Answer: A

QUESTION NO 138. A backup is taken using the following command:

tar -cvf abcdef.tar /usr/local/include/tcpd.h

The operator is in the directory /usr/local/restores and runs the following command:

tar -xvf abcdef.tar

Where will the file be restored?

A./usr/local/include/tcpd.h

B./usr/local/restores/tcpd.h

C./usr/local/restores/include/tcpd.h

D./usr/local/restores/usr/local/include/tcpd.h

Answer: A

QUESTION NO 139. An administrator is applying a corrective service to their HMC. The

corrective service has been shipped on 3 DVDs. Which action will ensure the corrective

service is correctly installed?

A.Select the option to automatically reboot the HMC.

Page 51: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 51/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

B.Select the option to automatically reboot the HMC after each disk.

C.Shutdown all managed LPARs prior to beginning the install process.

D.Copy all disks into the ""SERVICE"" directory and select concurrent install.

Answer: A

QUESTION NO 140. A POWER6 595 LPAR has two dedicated processors. The LPAR is

active and running AIX 6.1.

What must be done to donate any unused processing capacity to the shared processor pool?

A.In the HMC Properties, select the options to allow processor sharing when the partition is

inactive and active.

B.In the LPAR Properties, select the options to allow processor sharing when the partition is

inactive and active.

C.In the LPAR Profile Properties, select the options to allow processor sharing when the

partition is inactive and active.

D.In the 595 Managed System Properties, select the options to allow processor sharing

when partitions are inactive and active.

Answer: C

QUESTION NO 141. The administrator changed the number of virtual processors from 1

to 2 in the default_profile of an LPAR. The operator ran the cfgmgr command expecting to

see 2 processors after that, but did not see them.

What action must be done to apply the changes?

A.Reboot AIX within the LPAR.

B.Run cfgmgr against the device sys0.

C.Shutdown and then activate the default_profile.

D.Ensure the RSCT daemon is operative and run cfgmgr again.

Answer: C

QUESTION NO 142. An administrator needs to recover an HMC due to a failed disk. The

disk has been replaced, allowing the administrator to reinstall the HMC back to the required

release of software. Backups of both the HMC Console Data and Upgrade Data are

available.

After reloading the HMC with the Recovery DVDs, what are the next steps to restore the

HMC

Page 52: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 52/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

configuration?

A.Use the 'HMC Management > Restore HMC Data' option to first restore just the HMC

Data..

B.Use the 'HMC Management > Restore Upgrade Data' option to first restore just theUpgrade Data.

C.Use the 'HMC Management > Restore HMC Data' option to first restore the HMC Data

and then the Upgrade Data.

D.Use the 'HMC Management > Restore Upgrade Data' option to first restore the Upgrade

Data, and then the HMC Data.

Answer: A

QUESTION NO 143. An administrator is looking for the "Open Restricted Shell Terminal"

option on the HMC GUI. Under

which panel is this option available?

A.HMC Management, but only from a local connection

B.Service Management, but only from a local connection.

C.Systems Management, but only from a local connection.

D.Systems Management, but only from a remote connection.

Answer: A

QUESTION NO 144. Following an unscheduled power outage, the administrator needs to

power up an IVM-managed system. For the given system, what is the first step in this

process?

A.Physically press the appropriate button on the system.

B.Physically disconnect and reconnect the power cable on the system.

C.Log into the IVM using a Web Browser, select the managed-system and select the Power

on option from the Operations menu.

D.Log into the HMC using a Web Browser, select the managed-system and select the Power

on option from the Operations menu.

Answer: A

QUESTION NO 145. An administrator wants to host several LPARs on a JS23 Blade

server. To achieve this, what

additional management software is required?

Page 53: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 53/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A.HMC

B.IVM

C.VIOS

D.IBM DirectorAnswer: C

QUESTION NO 146. On which HMC GUI panel can the 'Enable Electronic Service Agent'

option be found?

A.HMC Management

B.Systems Management

C.Service Management

D.Electronic Management

Answer: C

QUESTION NO 147. The system hangs at boot time after starting NFS services. What is

the most likely cause?

A.The action parameter of rcnfs in /etc/inittab is 'off' and the script called is not exiting.

B.The action parameter of rcnfs in /etc/inittab is 'wait' and the script called is not exiting.

C.The action parameter of rcnfs in /etc/inittab is 'once' and the script called is not exiting.

D.The action parameter of rcnfs in /etc/inittab is 'respawn' and the script called is not

exiting.

Answer: B

QUESTION NO 148. The administrator created an entry in the inittab for run level 2. The

system was already booted in normal mode. Which will start the newly created entry?

A.init 1

B./etc/rc

C.telinit q

D./etc/rc.d/rc2.d

Answer: C

QUESTION NO 149. The 'fsck -p /dev/lv00' command returned the following message:

Not a recognized filesystem type

What is the likely cause of the problem and how should it be resolved?

Page 54: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 54/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A.The file system superblock is dirty. It can be replaced from the VGDA.

B.The logical volume superblock is dirty. It can be replaced from the VGDA.

C.The file system superblock is dirty. It can be replaced from the secondary copy.

D.The logical volume superblock is dirty. It can be replaced from the secondary copy.Answer: C

QUESTION NO 150. Which command will list all subsystem resources on a server?

A.lssrc a

B.lssrc g

C.lssrc l

D.lssrc -s

Answer: A

QUESTION NO 151. Which command starts Workload Manager?

A.wlmrun

B.wlmstart

C.wlmcntrl

D.wlmstartup

Answer: C

QUESTION NO 152. Where is the run date for an 'at' job located?

A.Within the job environment set up

B.Within the user data of the at job

C.In the file name preceeded with a userid

D.In a special file used by the cron daemon

Answer: A

QUESTION NO 153.How can an administrator view the service bootlist?

A. service -1 bootlist

B. bosboot -ad service

C. listboot -1 service

D. bootlist -om service

Answser:D

Page 55: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 55/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 154.An administrator has mirrored rootvg onto hdiskl, after the physical

volumes finished syncing the administrator

wants to add the new disk to the boot order.

Currently the boot order looks like:hdiskO blv=hd5

Which of the following commands will add hdiskl to the current boot order?

A. bootset -a hdiskl

B. bootlist -om normal hdiskl

C. setbootlist -m hdiskO hdiskl

D. bootlist -om normal hdiskO hdiskl

Answser:D

QUESTION NO 155.After mirroring rootvg, a system administrator wants to validate that

the system will boot correctly.Which of the following tasks must be performed before

changing the boot order?

A. Run a bosboot -a command

B. Mirror the hd5 on the two disks

C. Set up another service mode bootiist

D. Check the disks using a Isvg -p rootvg command

Answser:C

QUESTION NO 156.A system was rebooted and is taking a long time to return. The

administrator has logged into the HMC and sees

reference code 0c9.

What does this mean?

A. The system is configuring a device.

B. A system initiated dump has started*

C. The system is varyingon a volume group.

D. The system is running an inbuilt self test.

Answser:B

QUESTION NO 157.Which key should be pressed on an ASCII terminal during the system

Page 56: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 56/76

Page 57: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 57/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

C. Force a umount of the filesystem with 'umount -F /dev/fslv02', and then run 'fsck -p

 /dev/fslv02' while the filesystem is unmounted.

D.Force a umount of the filesystem by varying off the hosting volume group and then

varyon the volume group. This will permit 'fsck -y' to be run against the failing filesystem.Answser:B

QUESTION NO 160.A system has two configured fibre channel cards, one of which, fscO,

has failed and must be replaced. Which command should an administrator use to remove the

card device and attached child devices?

A. rmdev -Rdl fcsO

B. rmdev -cdl fcsO

C. rmdev -cdl fscsiO

D. rmdev -Rdl fscsiO

Answser:A

QUESTION NO 161.Which command enables new devices that are connected to the scsi5

adapter without performing a full scan of the system?

A. cfgmgr -f scsi5

B. cfgmgr -i scsi5

C. cfgmgr -t scsi5

D. cfgmgr -l scs/S

Answser:D

QUESTION NO 162.Which command will enable the administrator to query the current

network adapter configuration?

A. netstat -v

B. entstat -d

C. Isattr-EI

D. Isdev -C -attr

Answser:A

QUESTION NO 163.Which command can be used to display information from the PvDv

object class in the ODM?

A. odmlist

Page 58: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 58/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

B. odmshow

C. Isdev -P

D. Isattr-EI

Answser:C

QUESTION NO 164.Which command will allow the creation of a 10-character login user

name?

A. chlogin -a log_name=10

B. chdev -I svsO -a max logname=10

C. chusr extended_logname=true [userid]

D. chuser login_name=10 extended_logname=true [userid]

Answser:B

QUESTION NO 165.What is the correct method for deleting 'paging04' paging space?

A. swapoff paging04 rmps paging04

B. swapofffdevfpaging04 rmps paging04

C. swapoff paging04 rmps /dev/paging04

D. swapoff /dev/paging04 rmps /dev/paging04

Answser:B

QUESTION NO 166.Which command will activate a defined paging space?

A.swapon pagingOl

B.chps a y pagingOl

C.mkps a /dev/pagingOl

D.swap a /dev/pagingOl

Answser:A

QUESTION NO 167.How is the default print queue identified?

A The first queue in queue config We

B.The stanza 'default = 1' is present in the queue config file

C.The backend @server has 'remback -p default' in the queue config file

D.The stanza 'default = [queuename]' is present in the queue config file

Answser:A

Page 59: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 59/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 168.A user is unable to determine the default system text editor. How can

the local administrator assist the user by identifying the default text editor for the system?

A. Login as the user and run 'echo $ENV.

B. Login as root and run the 'env' command.C. Login as root and 'cat /etc/environment'.

D. Login as the user and run the 'env' command.

Answser:B

QUESTION NO 169.Which command will migrate a filesystem from one volume group to

another?

A. cpfs

B. cplv

C. mkfscopy

D. migratepv

Answser:B

QUESTION NO 170.A new LPAR has been created that needs SAN attached disk for a

database. After AIX has been installed, the fibre cables are attached to the adapters.How

should the administrator configure the disks?

A. Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to

the server, run'cfgmgr1 to discover and configure the disks.

B. Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned

to the server, run 'cfgmgr' to discover and configure the disks.

C. Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to

the server, run 'cfgmgr' to discover and configure the disks.

IX Run 'cfgmgr1 to force the FC adapter to log into the SAN, have the SAN LUNs zoned to

the server^ run 'cfgmgr1 to discover and configure the disks.

Answser:D

QUESTION NO 171.Which command synchronizes or rebuilds the logical volume control

block, the device configuration database, and the volume group descriptor areas on the

physical volumes?

A.syncvg rootvg

B.synclvm rootvg

Page 60: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 60/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

C.varyonvg rootvg

D. syndvodm rootvg

Answser:D

QUESTION NO 172.An administrator needs to configure a server (192.168.22.22) as a

temporary solution for an NTP master that has stopped working.What is the process for

configuring the NTP master?

A. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line

'fudge 127.127.1.0 stratum

0', and then refresh the daemon.

B.Edit the/etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line

'master 127.127.1.0 stratum

0', and then refresh the daemon.

C.Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the

line 'fudge 192.168.22.22

stratum O'. and then refresh

D.Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the

line 'master 192.168.22.22

stratum 0', and then refresh the daemon.

Answser:C

QUESTION NO 173.How should a DNS client be configured?

A. Edit the /etc/netsvc.conf file to have a nameserver and a domain search order.

B. Edit the /etc/resolv.conf file to have a nameserver and a domain search order.

C. Edit the /etc/resolv.conf file to have a nameserver. domain, and domain search order.

D. Edit the /etc/netsvc.conf file to have a nameserver, domain, and domain search order.

Answser:C

QUESTION NO 174.An administrator issued a command to update the firmware of an

Ethernet adapter on a partitioned system, but received an error. What is the most likely

cause of the problem?

A. The adapter must be taken offline prior to the firmware update.

B. The system has not been rebooted since the adapter was added to the LPAR.

C. The adapter must be assigned to the service partition prior to updating the firmware.

Page 61: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 61/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

D. The adapter must be dynamically removed from the LPAR prior to updating the

firmware.

Answser:A

QUESTION NO 175.A system is experiencing packet routing problems, when the

administrator runs netstat -nr the following default

routes are displayed:

defaultl65.253.251.1UG51601304en8--

defaultl92.168.50.1UGH01590450en4--

Assuming the first route is correct, how can the administrator remove the incorrect default

route?

A. route delete default 192.168.50.1

B. access smit with the route_remove shortcut

C.chdev -IinetO -a delroute=net -hopcountfO.. 192.168.50.1

D. flush the routing table from the console and configuring the 165.253.251.1 route

Answser:C

QUESTION NO 176.An administrator has set up serverA and serverB to use the

 /etc/hosts.equiv file so that applications on serverA can remotely run commands on serverB.

Which command will verify if a new user from serverA is trusted on serverB?

A. As the root user from serverA run the command rhost serverB.

B. As the root user from serverA run the command riogin serverB.

C. As the desired user from serverB run the command rhost serverA.

D. As the desired user from serverA run the command riogin serverB.

Answser: D

QUESTION NO 177.The ping Ioopback hangs with no output. Which of the following is

the most likely cause?

A. The Ioopback interface is down and resolv.conf is configured.

B. The Ioopback is not in /etc/hosts and resolv.conf is configured.

C. The Ioopback interface is down and resolv.conf is not configured.

D. The ioopback is not in /etc/hosts and resolv.conf is not configured.

Answser: D

Page 62: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 62/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 178.After updating serverB's network configurations, an administrator

notices that serverA, which resides in a different subnet, is unable to communicate with

serverB via ssh or telnet. As ping's to the server fail,the administrator logs onto serverB via

a console and finds an available interface enO in the 'up1 state. From the console connection,enO can communicate with other servers in the same subnet What is the most likely cause

of the problem?

A. enO has no associated ip address.

B. serverB is missing its default route.

C. serverB and serverA cannot connect due to a firewall.

D. enO has been set up to block traffic from servers that are in different subnets.

Answser:B

QUESTION NO 179.A project requires a new server to be set up with the ability to

automatically fail over its Ethernet connection to a second connection if a network failure

occurs. Which of the following provides greatest resiliency?

A.Two switch ports will be needed on a switch, two Ethernet cables will be needed for the

server each connecting to two different Ethernet cards, and one IP address will be needed.

B.Two switch ports will be needed on two different switches, two Ethernet cables will be

needed for the server each connecting to two different Ethernet cards? and one IP address

will be needed.

C. Two switch ports will be needed on two different switches, two Ethernet cables will be

needed for the server each connecting to two different Ethernet cards, two different IP

addresses will be needed.

D. One switch port will be needed on one switch, a splitter will be needed to split the

connection, two Ethernet cables will be needed for the server each connecting to two

different Ethernet cards, and two different IP addresses will be needed.

Answser:B

QUESTION NO 180.Which daemon identifies available filesystems through the /etc/xtab

file?

A. nfsd

B. biod

C. rpc.lockd

D.rpc.mountd

Page 63: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 63/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

Answser:D

QUESTION NO 181.Which file contains the attributes used to setup a new user account

when executing Ynkuser' without any flags?A. /etc/security/user

B. /etc/security/passwd

C. /etc/security/mkuser.sys

D./etc/security/mkuser.default

Answser:D

QUESTION NO 182.Which command should be used to reset a failed login count?

A. chsec

B. chusr

C. passwd

D. chgusrprf 

Answser:A

QUESTION NO 183.Which command will set the core size file to unlimited for the user

'webapp?

A. no-p'core=-l'webapp

B. chaser 'core=-l' webapp

C. setsenv -attr lcore=unlimitedl webapp

D. chsec -f '/etc/security/limits1 'core=-l' webapp

Answser:B

QUESTION NO 184.Which environment variable must be changed in a users profile so

that upon login, the command prompt identifies the server?

A.PMT

B.PS1

C.PRT

D.PT1

Answser:B

QUESTION NO 185.Which command will change the user webserver's shell to ksh93?

A.chshell -ksh93 webserver

Page 64: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 64/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

B.chsh webserver /usr/bin/ksh93

C.chuser -a shell=/usr/bin/ksh93 webserver

D.setuid -a SHELL=/usr/bin/ksh93 -u webserver

Answser:B

QUESTION NO 186.Which command will display the current control key settings?

A. 'tty-l'

B. 'sttv-a'

C. 'Istty-a'

D. 'terminfo-I'

Answser:B

QUESTION NO 187.How should read, write and execute permissions for 'group1 and

'other1 be granted to all files and directories

within the /app filesystem?

A chmod -R 677 /app

B. chmod -R 664 /app

C. chmod -r 677 /app

D. chmod -r 664 /app

Answser:A

QUESTION NO 188.What should an administrator do to set up a required role for a user id

that will allow it to start/stop WPARs on the server?

A. On the desired WPAR:

mkrole authorizations=aix.wpar.system newRole

setkst -t role

chuser roles=newRole default_roles=newRole userl

B. On the global environment:

mkrole authorizations=aix.wpar.svstem newRole

setkst -t role

chuser roles=newRole default roles=newRole userl

C. On the desired WPAR:

Edit the /etc/security/authorizations file adding:

Page 65: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 65/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

'newRole authorizations=aix.wpar.system'

setkst -t role

chuser roles=newRole default_roles=newRole user!

D. On the global environment:Edit the /etc/security/authorizations file adding:

'newRole authorizations=aix.wpar.system'

setkst -t role

chuser roles=newRole default_roles=newRole userl

Answser:B

QUESTION NO 189.Which installation method enables the quickest recovery in the event

of failure when upgrading from AIX 5.3 to AIX 6.1?

A. Use alt disk install.

B. Apply the upgrade without commit.

C. Use a backup image from a NIM server.

D. Use a mksysb image from a locally attached DVD-RAM.

Answser:A

QUESTION NO 190.An administrator is installing AIX. The SMS panel lists the following

network adapter:

NIC Adapters

DeviceLocation CodeHardware

l.Interpartition Logical LANU9123.710.1008B1A-V4-C2-T15e5a00004002

The NIM server is running in another LPAR on the same managed system. What speed and

duplex should be configured on this adapter?

A. 100/Full

B. 1000/Half 

C. 1000/Auto

D. Auto/Auto

Answser:D

QUESTION NO 191.An administrator migrates from AIX 5.3 to AIX 6.1. Upon

completion, a client questions why files are missing from /tmp. How should the

administrator respond to the client?

Page 66: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 66/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A. Explain that the files never existed in the first place.

B. Explain that during a Migration install the /tmp filesvstem is overwritten.

C. Explain that after a Migration install, all system filesystems will be empty.

D. Explain that /tmp is temporary storage and files are automatically removed every30 days.

Answser:B

QUESTION NO 192.What are the steps required to perform a Preservation install on a

server?

A. Shutdown the server and boot it into SMS.

Se/ect SMS menu option OS Upgrade, Preservation install for the install tvper and allow

upgrade to run.

B. Shut down the server and perform a network boot from a local NIM server.

Select Presevation install for the install type, and allow upgrade to run.

C. Shutdown the server and boot it into SMS.

Select SMS menu option OS Upgrade, Presevation install for the install type, and allow for

upgrade to run.

D. Re-boot the server and NFS mount the bos images from a local NIM server. Run smit

install. Select Presevation install for the install type, and allow upgrade to run.

Answser:A

QUESTION NO 193.The output from an oslevel command results in the following warning

message:

Not all filesets for 6i-00-040815_SP were found.

Which command will display the filesets that are missing from this service pack?

A. islpp-l Igrep'SP'

B. Islpp -i 61-00-040815_SP

C. insfflx -icqv /arep ':-:'

D. instfix -1 61-00-040815_SP

Answser:C

QUESTION NO 194.Which LPP status signifies the inability to return to a previous

version of a fileset because the saved files have been removed?

Page 67: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 67/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A. APPLIED

B. REMOVED

C. REJECTED

D. COMMITTEDAnswser:D

QUESTION NO 195.Which tool validates firmware and HMC compatibility for a proposed

AIX upgrade?

A. SPT

B. LVT

C. FLRT

D. SSIC

Answser:C

QUESTION NO 196.Where can the Open Source prerequisite filesets that allow the

installation of the Firefox Web browser be found?

A. Fix Central

B. IBM AIX Too/box

C. AIX Expansion Pack 

D. Common base AIX CDs

Answser:B

QUESTION NO 197.Which command is used to initialize and configure a NIM master?

A. /usr/sbin/nim_init

B. /usr/bin/installnim

C. /usr/sbin/nimconfia

D. /usr/sbin/setup_server

Answser:C

QUESTION NO 198.An administrator is defining an lpp_source called lpp_AIX6 in NIM

when the following warning message is displayed in

the output:

warning: 0042-267 c_mk_lpp_source: The defined !pp_source does not have the 'simages1

Page 68: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 68/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

attribute because one or more of the following packages are missing:

bos

bos.net

bos.diagbos.sysmgt

bos.terminfo

bos.terminfo. all. data

bos.mp64

devices, common

bos.64bit

What does this warning message mean?

A. The lpp_AIX6 is not a valid lpp_source NIM resource.

B. The lpp_AIX6 can be used in NIM BOS operations to install AIX only on standalone

clients.

C. The Ipp AIX6 can be used in NIM CUST operations to install software on SPOTs and

running machines.

D. The lpp_AIX6 does not contain all of the required software packages for NIM CUST

installation operations.WArialCourier

NewTimes New RomanZ

Answser:C

QUESTION NO 199.Refer to the following output:

The current permanent system firmware image is EM340_041

The current temporary system firmware image is EM340_075

The system is currently booted from the temporary firmware image.

Which command will display similar information?

A. Ism code

B. diag -S 1

C. prtconf | grep firmware image

D. invscout -vf [Server system name]

Answser:A

QUESTION NO 200.Which describes the operation required to move to a new release

level of system firmware?

Page 69: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 69/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

A. Deferred

B. Transient

C. Concurrent

D. DisruptiveAnswser:D

QUESTION NO 201.An administrator needs to apply a Technology Level update. During

the preview install, the output indicates that there is insufficient space in the /usr filesystem.

Review of the root volume group indicates there are no available physical partitions, but the

 /test jfs2 filesystem is only 8% used. What is the most efficient method to use the available

space in the /test filesystem to apply the update?

A. Use chfs to reduce the/test filesystem

B. Use cplv to copy the /test filesystem to a smaller logical volume

C. Use migratepv I to move the /test filesystem to a different volume group

D. Backup the /test filesystem, remove it, and recreate it with a smaller size

Answser:A

QUESTION NO 202.How can an administrator verify that the disk is still usable when the

output of 'Ispv' shows 'hdiskl' is in a missing state?

A. Ispv -I hdiskl

B. Iscfg -I hdiskl

C. Isattr-I hdiskl

D. dd if=/dev/hdiskl bs=512kcount=10of=/tmp/disk.txt

Answser:D

QUESTION NO 203.Which of the following explains the relationship between a physical

and logical partition?

A.A physical partition is hosted on one or more logical partitions. A logical partition is used

when describing storage.

B.A logical partition is hosted on one or more physical partitions. A physical partition is

used when describing storage.

C.A physical partition is used when describing only a SCSI or SAS disk. A logical partition

is used when describing a SAN LUN.

D.A logical partition is used when describing only a SATA or SAS disk. A physical

Page 70: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 70/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

partition is used when describing RAID or mirrored arrays.

Answser:B

QUESTION NO 204.A system has a mirrored data volume group that has a filesystem /data of 10 logical partitions. How many physical partitions will the filesystem have?

A. 1

B. 2

C. 10

D.2Q

Answser:D

QUESTION NO 205.What must an administrator do to create two new volume groups on a

system with only one spare disk?

A. Run the 'mkvg -M' command to create multiple volume groups on a single disk.

B. Add a new disk to the system or re/ease a disk from the one of the existing volume

groups.

C. Run the 'mkvg' command to create multiple volume groups on a single disk 

providing the disk does not have a PVID.

D. Run the 'mkvg1 command to create multiple volume groups on a single disk 

providing the volume groups have the same PP size.

Answser:B

QUESTION NO 206.The 'Isvg -o1 command is run with an output of only rootvg, but the

server has another volume group named datavg,

which is not displayed. What is the likely cause?

A. datavg is in an offline state.

B. 'Isvg -o' only displays the root volume group.

C. 'Isvg -o' only displays the fist volume group.

D. datavg has no filesystems and therefore, is inactive.

Answser:A

QUESTION NO 207.An administrator wants to mirror an important filesystem between

two disks without mirroring the entire volume group. Which command should be used?

A. CplV

Page 71: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 71/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

B. mirrorvg

C. mklvcopy

D. migratelv

Answser:C

QUESTION NO 208.The server hostl has been set up as a backup system with the

following /etc/exports:

 /backups -rw

How can a second server regularly use this disk space?

A. /usr/sbin/mkfs -s 8G -o nbpi=2048,frag=512 /dev/lvOO -b -I hostl

B. /usr/sbin/crnfsmnt -d /backups -I /backups hostl -R -X -v -S -b bg

C. /usr/sbin/mknfsmnt -f/backups -d /backups -h hostl -a -S -t rw -w bg -g

D. /usr/sbin/crfs -v nfs -g vgl -A yes -p rw -m /backups -a Iogname=/dev/lv00

Answser:C

QUESTION NO 209.A log logical volume is created as indicated below:

root@hostl:/# mklv -a c -t jfs2log -b y datavg 1

loglvOO

root@hostl:/# Isvg -I datavg

datavg:

LV NAMETYPELPsPPsPVsLV STATEMOUNT POINT

loglv00jfs2loglllciosed/syncdN/A

A new filesytem is then created using the new log logical volume. When the administrator

attempts to mount the filesytem,

the following error occurs:

root@hostl:/# mount/newfs

mount: 0506-324 Cannot mount /dev/lvOO on /newfs: A system call received a parameter

that is not valid.

Which of the following actions will resolve this error?

A. Recreate the file system with -p rw flags and re-mount.

B. Run 'foaform /dev/loalvOO' and hit V to destroy all data.

C. Run 'clrginfo -p1 to clear the invalid filesystem parameter.

D. Change 'account = true1 value in /etc/filesystem to 'account = false1.

Page 72: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 72/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

Answser:B

QUESTION NO 210.Files /tmp/file2 and /tmp/file3 are hard linked to /tmp/filel. What will

the result be if a user makes changes to /tmp/file2 at the same time another user tries todelete /tmp/filel?

A. All three files will contain the updates and will remain available.

B. All three files will be deleted and no changes will be made to /tmp/file2.

C. Only /tmp/file2 will contain the updates, but /tmp/file3 will remain available.

D. Both /tmp/file2 andftmpffile3 will contain the updates and will remain available.

Answser:D

QUESTION NO 211.LPARl is configured to have the same 2 LUNs virtualized by a

redundant pair of VIO servers. Which command will validate that both storage paths are

available?

A. Ispath

B. sdd query adapter

C. pcmpath query adapter

D. datapath query device

Answser:A

QUESTION NO 212.Which command will check the errorlog size?

A. Issrc -s errord

B. errorlog -histsize

C. /usr/fib/errdemon -/ 

D. Is -I /var/adm/ras/errlog

Answser:C

QUESTION NO 213.Which command will display messages directed to the system

console?

A. slog -t console -o

B. cat /var/adm/ras/conslog

C. cat /var/log/all/console.log

D. grep CONSOLE /var/adm/messages

Answser:A

Page 73: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 73/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 214.Which command must be run to log a hardware repair entry in the

errorlog?

A.diaqB.cfgmgr

C.errlog

D.errlogger

Answser:A

QUESTION NO 215.An administrator suspects problems on a SCSI hard disk, but upon

running diagnostics, no errors were found.

What must be done to check the condition of the drive?

A. Run diag and select the 'Certify Media'task.

B. Perform a read and write test on the disk and monitor errorlog.

C. Update the disk firmware to the latest level and monitor errorlog.

D. Format the disk to ensure bad blocks are omitted from the disk layout.

Answser:A

QUESTION NO 216.Which command will debug the AIX kernel?

A. kdb

B. snap

C. truss

D. trace

Answser:A

QUESTION NO 217.Which command will determine if the Trusted Computer Base is

enabled on a system?

A. getrunmode

B. getsecconf 

C. tcbck -display

D. odmaet -q attribute= TCB STA TE PdAt

Answser:D

QUESTION NO 218.Which command will list ODM class descriptions to provide the

Page 74: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 74/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

format needed to create a new class?

A. odmadd

B. odmget

C. odmshowD. odmcreate

Answser:C

QUESTION NO 219.Which command shows dump components and controls live dump

attributes?

A. dumpctrl

B. sysdumpdev

C. livedumpdev

D. livedumpctrl

Answser:B

QUESTION NO 220.Which command will retrieve /unix and dump from the dump device?

A. snap -R

B.snap -D

C. snap -U

D. snap -N

Answser:B

QUESTION NO 221.An application writes to a log file in the /logs filesystem that is full.

After the log file is deleted, 'df still shows the filesystem as 100% full. What is the likely

cause of the problem and what will resolve it?

A. The deleted file is still open by the application. The system must be rebooted before 'df 

will show the reduction in the filesystem.

B. The deleted file is still open by the application. The application must be stopped before

'df* will show the reduction in the filesystem.

C.The filesystem is still marked as full in the /etc/fs.status file. The system must be rebooted

before 'df will show the reduction in the filesystem.

D. The filesystem is still marked as full in the /etc/fs.status file. The application must be

stopped before 'df will show the reduction in the filesystem.

Answser:B

Page 75: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 75/76

  000‐104 

(C) Copyright 1998 Easy CramBible Lab, All Rights Reserved. 

QUESTION NO 222: What should an administrator do to allow the logon of a user to a

local system without limitations from the host 'webserver'?

A.configure the /etc/.rhosts with:webserver <user>

B.configure the root'$HOME/.rhost file with:

+webserver <user>

C.configure each user's $HOME/.rhosts file with:

webserver <user>

D.configure the root'$HOME/.rhost file with:<webserver ip> <user>

Answser: C

QUESTION NO 223: What is the process for creating an NFS mount between two servers

in the same network zone?

A.Export the desired filesystem in the /etc/nfs file, run 'exportfs -a', create a mount directory

on the desired server, and mount the NFS filesystem.

B.Run 'exportfs -a', export the desired filesystem in the /etc/nfs file, create a mount directory

on the desired server, and mount the NFS filesystem.

C.Export the desired filesystem in the /etc/exports file, run 'exportfs -a', create a mount

directory on the desired server, and mount the NFS filesystem.

D.Run 'exportfs -u', export the desired filesystem in the /etc/exports file, create a mount

directory on the desired server, and mount the NFS filesystem.

Answser: C

QUESTION NO 224: How should an administrator change the order in which host name

lookup is performed so that

it reads the host file before using DNS?

A.Edit the /etc/inetd.conf file so that it reads 'local, bind'.

B.Edit the /etc/resolv.conf file so that it reads 'local, bind'.

Page 76: 000-104 AIX Bible Study

8/3/2019 000-104 AIX Bible Study

http://slidepdf.com/reader/full/000-104-aix-bible-study 76/76

  000‐104 

C.Edit the /etc/netsvc.conf file so that it reads 'local, bind'.

D.Edit the /etc/nslookup.conf file so that it reads 'local, bind'.

Answser: C

QUESTION NO 225: Which file should be edited to manually add a printer?

A./etc/prtconf 

B./etc/qconfig

C./etc/lpconfig

D./etc/prtconfig

Answser: B

QUESTION NO 226: Which install method should be used to recycle an LPAR without

retaining any information from its original configuration?

A.Migration

B.Preservation

C.New and Complete Overwrite

D.Alternate disk installation

Answser: C