Upload
buikhuong
View
266
Download
0
Embed Size (px)
Citation preview
�
�
� �
�
�
� �
����������� ������ ���������������������������������
���� �������������� ���!������������������������� �����
LiTE
Zenith LiTE 3D AOI with RevolutionaryNew 3D Measurement
The Zenith LiTE 3D AOI system provides full 3D inspection of components,patterns, holes and even foreign material on assembled PCBs with true 3D measurement. Koh Young Technology offers accurate and fast 3D inspection overcoming the shortcomings and vulnerabilities of conventional 2D AOI.
Using 3D measurement values to program and to set inspection conditions, Zenith LiTE 3D AOI system provides users with intuitive and user friendly software. Results can be reviewed together with Koh Young’s 3D SPI inspection results, to enable easier verification and analysis of defects.
Flags and Quantifies All DefectsMissing, Offset, Rotation, Polarity, Upside Down, OCV, Solder Fillet, Billboarding, Lifted Lead, Lifted Body, Tombstone, Bridging and more.
Lifted Body
LED Component Defect
No Solder
Judging Solder Fillet DefectsUsing 3D Height and Volume Measurement Values
Using patented 4-way projection technology and multi-frequency height measurement, Zenith LiTE provides a wide range of measurement while maintaining the high resolution.
Lifted Body(Body Coplanarity)
Solder Joint Defects
Lifted Lead(Lead Coplanarity)
Judge Defect by Measured Component Height Profile
Full 3D Inspection of Solder Joint
Judge Defect by Measured Lead Shape Profile
Measured lead height valueexceeds tolerance
Dynamic PCB Environment
Flexible PCB
Slope
Height Difference
Local Board Warp/ Rotation/ Shrinkage/ Expansion
The Perfect Warp Compensation SolutionPCB warp becomes more pronounced during the reflow process in the applications using FPCB or building large boards, due to the high temperature required for reflow process. Zenith LiTE compensates serious FPCB warp in real time while not sacrificing inspection speed and without false calls. Koh Young’s KSMART Warp offers a simple and easy solution by teaching bare board prior to inspection to recognize pattern information without PCB CAD data.
����������� ���
�����������������Y����������� ���
Inspects Connector on FPCBwith Serious Warp
������������
Fast and Easy Programming Using 3D Measurement ValuesKoh Young’s innovative programming tool offers the new concept of easy programming by using 3D measurement value. Koh Young’s own 3D Component Library, threshold values and inspection results are all based on true measurement values. Users can eliminate lengthy fine tuning process, and programming is much easier for all user levels.
Intuitive and Accurate Defect Judgement
After Warp Compensation
������������ �����
www.kohyoung.com
�
© Koh Young Technology Inc. 2012-2014
0.32sec/FOV, 50cm2/sec, 7.7in2/sec 0.30sec/FOV, 30cm2/sec, 4.6in2/sec
20μm�
4MPix High Speed Camera
RGB LED Dome Illumination
40x40mm (1.57x1.57inch)
(Basic) PCB Gerber, Placement file, Mounter job file, Mentor Neutral, FabMaster, FabMaster Pin CAD file, Zuken
(Optional) ODB++, Allegro, GenCAD
Windows 7 Ultimate 64 bit
50mm (1.96inch)
200-240VAC, 50/60Hz Single Phase, 5kgf/cm2
Above specifications are subject to change without notice
14&15th Floor, Halla Sigma Valley Bldg, 53 Gasan Digital 2-ro, Geumcheon-gu, Seoul, Korea (153-706)Tel. +82-2-6343-6000 / Fax. +82-2-6343-6001 / E-mail. [email protected]
SpecificationsRequirements Solutions
3D Shadow Free Moiré Technology & 4 Way Projection
Multi Frequency Moiré Technology
Pad Referencing + Multi Frequency Moiré Technology
True 3D Measurement
Full 3D Inspection of All Components
Wide Measurement Range + Accuracy
Real Time PCB Warp Compensation
Dark Component & White Body Component Location
Legending and Specular Regions on PCB
Lifted Lead Measurement
Shallow Polarity Dimple Measurement
Inspection Items
Inspection Task Missing, Offset, Rotation, Polarity, Upside down, OCV, OCR, Coplanarity,
Solder fillet, Lifted lead, Lifted body, Billboarding, Tombstone, Bridging, Dimension
Inspection Performance
Inspection Speed
Height Accuracy(on a KY Calibration Target)
Camera Pixel Resolution
Camera
Illumination
FOV Size
Conveyor Width Adjustment
Conveyor Fix Type Automatic
Front/Rear Fixed (factory setting)
PCB Thickness
Max. PCB Size
PCB Handling
Software
Supported Input Format
Operating System
Barcode Reading Software using System CameraBarcode Recognition
Installation Specifications
Options
Machine Weight
Machine Size
Top/Bottom Side Clearance
Supplies
�����
��������� ���� ����� ���� ���
����������� �������� ����� ��� ����� ����
Max. PCB Weight
+ 3%_
��������������� ���������!��� ���
�������"#
15μm
��$'�*�:'��������� �;������ ��� ��$'�*�:'�< ���=����� �;������ ���
30x30mm (1.18x1.18inch)
M
DL
0.4-5mm (0.015-0.20inch)
0.4-5mm (0.015-0.20inch)
0.4-5mm (0.015-0.20inch)
Ring Belt 2kg (4.4lbs), Timing Belt 5kg (11lbs) 10kg (22lbs)
0.5-8mm (0.02-0.31inch)
330x330mm (13x13inch)
L
510x510mm (20x20inch)
XL
850x690mm (33.4x27.1inch)
Dual 510x320mm (20x12.6inch) Single 510x580mm (20x22.8inch)
M DL
550kg (1212lbs) 700kg (1543lbs)
820x1265x1627mm (32.2x49.8x64inch)
1000x1445x1627mm (39.3x56.9x64inch)
L XL
600kg (1322lbs) 850kg (1874lbs)
1000x1265x1627mm (39.3x49.8x64inch)
1350x1445x1627mm (53.1x56.9x64inch)