· Web viewProjected Mounting Brackets with a 10/14 inch (254 ... Matching the viewing surface is standard for AV format, ... Universal hanging brackets for attachment to wall

SECTION 11 52 13.50SURFACE MOUNTED FRONT PROJECTION SCREENS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2015 - 2015 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Manually operated, surface mounted, front projection screens.

B. Electrically operated, surface mounted, front projection screens.

C. Fixed, surface mounted, projection screen.

1.2 RELATED SECTIONS

A. Division 5 - Metal Fabrications: Suspension systems for projection screens.

B. Section 06 40 00 - Architectural Woodwork.

C. Section 09 22 26 - Suspension Systems.

D. Section 09 26 13 - Gypsum Veneer Plastering.

E. Section 09 21 16.23 - Gypsum Board Shaft Wall Assemblies.

F. Section 09 51 23 - Acoustical Tile Ceilings.

G. Division 16 for electrical wiring, connections, and installation of remote control switches for electrically operated projection screens.

1.3 REFERENCES

A. NFPA 70 - National Electrical Code.

B. NFPA 701-99 - Fire Tests for Flame-Resistant Textiles and Films.

C. GREENGUARD Environmental Institute Gold.

D. US Green Building Council.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

11 52 13.50-1

C. Wiring diagram for electrically operated units.

D. Shop Drawings: Shop drawings showing layout and types of projection screens. Show the following:1. Location of screen centerline.2. Location of wiring connections.3. Seams in viewing surfaces.4. Detailed drawings for concealed mounting.5. Connections to suspension systems.6. Anchorage details.7. Accessories.8. Frame details.

E. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

F. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

1.5 QUALITY ASSURANCE

A. Single Source Responsibility: Obtain each type of projection screen required from a single manufacturer as a complete unit, including necessary mounting hardware and accessories.

B. Coordination of Work: Coordinate layout and installation of projection screens with other construction supported by, or penetrating through, ceilings, including light fixtures, HVAC equipment, fire-suppression system, and partitions.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Do not deliver projection screens until building is enclosed and other construction where screens will be installed is substantially complete.

B. Store products in manufacturer's unopened packaging until ready for installation.

C. Protect screens from damage during delivery, handling, storage, and installation.

1.7 COORDINATION

A. Coordinate work with installation of ceilings, walls, electric service power characteristics, and location.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Draper, Inc., which is located at: 411 S. Pearl P. O. Box 425; Spiceland, IN 47385-0425; Toll Free Tel: 800-238-7999; Tel: 765-987-7999; Fax: 866-637-5611; Email:request info ([email protected]); Web:www.draperinc.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 MANUALLY OPERATED, SURFACE MOUNTED, FRONT PROJECTION SCREENS

A. Silhouette/Series M: Spring roller operated, extruded aluminum case. Contoured aluminum

11 52 13.50-2

case with removable front cover, which conceals all mounting devices and fasteners including viewing surfaces that retract completely inside the case.1. System Options:

a. Contoured aluminum case finished in a white color.b. Contoured aluminum case finished in a light grey color.c. Contoured aluminum case finished in a black color.d. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.e. Projected Mounting Brackets with a 10/14 inch (254/356 mm) clearance from

wall.f. Wall mount Z-clips.g. Projected mounting brackets shall have a white finish.h. Projected mounting brackets shall have a black finish.i. No projected mounting bracket required.j. Auto Return spring roller with built-in inertia reduction mechanism to ensure

viewing surface retracts slowly, smoothly and quietly into case. Provide intermediate stop positions.

2. Projection Viewing Surface:a. Matt White XT1000E - On Axis gain of 1.0. 180 degree viewing cone. Washable

surface. GREENGUARD Gold certified.b. Argent White XH1500E - On Axis gain of 1.5. High reflectivity fabric with broad

viewing cone. Excellent resolution and color balance. Flame and Mildew resistant.

c. Pearl White CH1900E - On Axis gain of 1.9. Matt white surface with reflective pearlescent coating.

d. Contrast Grey XH800E - 0.8 On Axis gain. Smooth grey surface provides excellent resolution and enhances color contrast. 180 degree viewing cone. GREENGUARD Gold certified.

e. Contrast White XH1100E - On Axis gain of 1.1. Diffuse white coating over a grey base material. Recommended for use with low to moderate light output digital projectors, where some provision for light control exists.

f. ClearSound Perf XT950E - On Axis gain of 0.95. 180 degree viewing cone. Acoustically transparent. Textile backed matt white perforated surface.

g. ClearSound White Weave XT900E - On Axis gain of 0.9. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Acoustical properties are comparable to the highest quality speaker grille cloth. Some control of ambient light is recommended. Flame and mildew resistant.

h. ClearSound Grey Weave XH600E - On Axis gain of 0.6. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Grey material for higher contrast. Acoustical properties are comparable to the highest quality speaker grille cloth. Flame and mildew resistant.

i. Chroma Key Blue - Blue flexible PVC surface for video production where you need the background to "disappear." Matte finish. Flame retardant, tear resistant, and wrinkle resistant. Offers excellent uniformity and consistent surface color edge to edge. Works effectively throughout 180 degree viewable range.

j. Chroma Key Green - Green flexible PVC surface for video production where you need the background to "disappear." Matte finish. Flame retardant, tear resistant, and wrinkle resistant. Offers excellent uniformity and consistent surface color edge to edge. Works effectively throughout 180 degree viewable range.

3. Viewing Area H x W.a. NTSC Format (4:3). Black masking borders standard.

1) 6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).

2) 7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).

11 52 13.50-3

3) 100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).

4) 10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).b. HDTV Format (16:9). Black masking borders standard.

1) 65 inch (1651 mm) 31-3/4 inches x 56-1/2 inches (806 mm x 1435 mm).2) 73 inch (1854 mm) 36 inches x 64 inches (914 mm x 1626 mm).3) 82 inch (2083 mm) 40-1/2 inches x 72 inches (1029 mm x 1829 mm).4) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032

mm).5) 100 inch (2540 mm) diagonal, 49 inches x 87 inches (1245 mm x 2210


mm).c. 16:10 Format. Black masking borders standard.

1) 67 inch (1702 mm) diagonal, 35-1/4 inches x 56-1/2 inches (895 mm x 1435 mm).

2) 76 inch (1930 mm) diagonal, 40 inches x 64 inches3) 85 inch (2159 mm) diagonal, 45 inches x 72 inches (1143 mm x 1829


mm).5) 109 inch (2769 mm) diagonal, 57-1/2 inches x 92 inches (1461 mm x

2337 mm).4. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with

top border matching the viewing surface.5. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with

a black masking top border.

B. Silhouette/Series C: Crank operated, tab tensioned, extruded aluminum case. Wall or ceiling mounted screen system. Contoured aluminum case with removable front cover, which conceals all mounting devices and fasteners including viewing surfaces that retract completely inside the case.1. System Options:

a. Contoured aluminum case finished in a white color.b. Contoured aluminum case finished in a light grey color.c. Contoured aluminum case finished in a black color.d. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.e. Projected Mounting Brackets with a 10/14 inch (254/356 mm) clearance from

wall.f. Wall mount Z-clips.g. Projected mounting brackets shall have a white finish.h. Projected mounting brackets shall have a black finish

2. Projection Viewing Surface:a. Matt White XT1000V - On Axis gain of 1.0. 180 degree viewing cone.

GREENGUARD Gold certified. Available with or without black backing.b. Pure White XT1300V - On Axis gain of 1.3. 180 degree viewing cone. For use

in situations where lighting is well controlled and where enhanced brightness is needed due to limited projector brightness. Available with or without black backing.

c. Grey XH600V - On Axis gain of 0.6. Provides excellent contrast and color reproduction. GREENGUARD Gold certified.

d. Pearl White MH1500V - On Axis gain of 1.5. Matt white surface with reflective pearlescent coating with black backing.

e. ReAct MS1000V - On Axis gain of 1.0. 60 degree viewing cone. Silver/grey surface provides superior performance in ambient light conditions, offers excellent contrast, optimal color rendition, and is fully HD compliant.

11 52 13.50-4

f. ClearSound NanoPerf XT800V - On Axis gain of 0.8. 180 degree viewing cone. Acoustically transparent white PVC fabric with microscopic perforations.

g. ClearSound Perf XT900V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent. Flexible matt white perforated surface. Reasonable control of ambient light is recommended.

h. TecVision XH700X Grey - On Axis gain of 0.7. 180 degree viewing cone. Designed for blending applications on curved or flat screens where ambient light is present. Provides very good contrast and color reproduction. Imaging Science Foundation certified and 4K ready. Dark backing.

i. TecVision XT1100X White - On-Axis gain of 1.1. 180 degree viewing cone. Designed for use when the projector brightness and size of screen require a minimal increase in gain. Imaging Science Foundation certified and 4K ready. Dark backing.

j. TecVision XH900X Grey - On Axis gain of 0.9. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 4K ready. Dark backing.

k. TecVision MS1000X Grey - On Axis gain of 1.0. 70 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 4K ready. Dark backing.

l. TecVision XT1000X White - On Axis gain of 1.0. 180 degree viewing cone. Imaging Science Foundation certified. 4K ready reference screen surface for blending applications, precise resolution, and color accuracy. Dark backing.

m. TecVision XT1300X White - On Axis gain of 1.3. 180 degree viewing cone. Imaging Science Foundation certified. 4K ready. Dark backing.

n. TecVision XT1600X White - On Axis gain of 1.6. 180 degree viewing cone. Imaging Science Foundation certified. 4K ready. Dark backing.

o. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone. Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 4K ready. Dark backing.

p. CineFlex CH1200V - On Axis gain of 1.2. 60 degree viewing cone. Neutral grey rear projection diffusing surface. Provides high resolution and excellent contrast, even in lighted rooms. Recommended for use with low to medium output projectors.

q. CineFlex XT600V - On Axis gain of 0.6. 180 degree viewing cone. White rear projection surface works well for edge matching or edge blending applications, and also for short throw rear projection. Reasonable control of ambient light is recommended.

r. CineFlex MH800V - On Axis gain of 0.8. 78 degree viewing cone. Low gain flexible rear material. Designed for use with high light output projectors and wide audience seating patterns.

3. Tab-Tensioning System:a. Viewing surface with integrated tabs and cable on each side of fabric to provide

tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable. Warranted for 5 years against tab separation

b. Viewing surface inserted into aluminum bottom dowel.4. Viewing Area H x W.

a. Custom: Custom Size: ________ H x ____________ W.b. NTSC Format (4:3). Black masking borders standard.




11 52 13.50-5

4) 10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).c. HDTV Format (16:9). Black masking borders standard.



5. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with top border matching the viewing surface.

6. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with a black masking top border.

C. Luma 2: Heavy duty, spring roller operated, steel case. Pentagonal, flat back design, steel case with scratch-resistant white textured finish. Universal hanging brackets for attachment to wall or ceiling. Case 22 gauge steel with matching end caps with integral roller brackets.1. System Options:

a. Projected Adjustable Mounting Brackets with an 18-1/2 to 24 inch (470 to 610 mm) clearance from wall. White finish.

b. Fixed Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall. White finish.

c. Fixed Projected Mounting Brackets with a 10/14 inch (254/356 mm) clearance from wall. White finish.

d. No projected mounting bracket required.e. Floating Mounting Brackets for mounting screen to wall or ceiling.f. Ceiling Trim Kit for recessing above acoustical tile ceiling grid.g. Auto Return spring roller with built-in inertia reduction mechanism to ensure

viewing surface retracts slowly, smoothly and quietly into case. Provide intermediate stop positions.

h. Aluminum Operating Pole:1) 4 feet.2) 6 feet.3) None.










i. Chroma Key Blue - Blue flexible PVC surface for video production where you

11 52 13.50-6

need the background to "disappear." Matte finish. Flame retardant, tear resistant, and wrinkle resistant. Offers excellent uniformity and consistent surface color edge to edge. Works effectively throughout 180 degree viewable range.


3. Viewing Area H x W.a. Custom: Custom Size: ________ H x ____________ W.b. NTSC Format (4:3). Black masking borders standard.


2) 10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).3) 11 foot (3.35 m) diagonal, 78 inches x 104 inches (1981 mm x 2642


mm).5) 15 foot (4.57 m) diagonal, 105 inches x 140 inches (2667 mm x 3556

mm).c. HDTV Format (16:9). Black masking borders standard.


2) 100 inch (2540 mm) diagonal, 49 inches x 87 inches (1245 mm x 2210 mm)






d. 16:10 Format. Black masking borders standard.1) 94 inch (2438 mm) diagonal, 50 inches x 80 inches (1270 mm x 2032


2337 mm).3) 113 inch (2870 mm) diagonal, 60 inches x 96 inches (1524 mm x 2438

mm).4) 123 inch (3124 mm) diagonal, 65 inches x 104 inches (1351mm x 2642

mm).5) 137 inch (3480) diagonal, 72-1/2 inches x 116 inches (1842 mm by 2946

mm).6) 165 inch (4191 mm) diagonal, 87-1/2 inches x 140 inches (2223 mm by




2.3 MOTORIZED, SURFACE MOUNTED, FRONT PROJECTION SCREENS

11 52 13.50-7

A. Artisan/Series V: Electric motor operated, hardwood or plastic laminate case, tab tensioned. Wall or ceiling mounted. Housing designed with internal junction box and plug-in wiring connections to allow housing to be installed and connected to building power supply separately from motor and viewing surface.1. Case Options:

a. Hardwood Case1) Styles.

a) Radius.b) Rectilinear.c) Traditional.d) Bevel.

2) Solid Hardwood Case Material.a) Natural Maple.b) Natural Cherry.c) Light Oak.d) Medium Oak.e) Walnut.f) Medium Cherry.g) Mahogany.h) Custom Wood _________.

b. Plastic Laminate Case (7/16 inch particleboard, 45 lb. Density, rectilinear styling).1) White.2) Beige3) Dove Grey.4) Burgundy.5) Black.6) Custom Color _________.

2. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake.

3. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake.

4. Motor Screen Controls, UL certified.a. Single station control rated 115V AC, 60 Hz with 3-position rocker switch with

cover plate to stop or reverse screen at any point.b. Multiple station control rated 115V AC, 60 Hz with 3-position rocker switches

with cover plates to stop or reverse screen at any point. Automatic override allows only one signal to reach the motor when operated simultaneously

c. Low voltage control unit with three button 24V switches and cover plate to stop or reverse screen at any point, built-in RF receiver, built-in Video Interface Control trigger for 3V-28V, RS232, and dry contact relays.

d. Low voltage 24V control unit with hand held RF remote three button control switch to stop or reverse screen at any point, built-in RF receiver, built-in Video Interface Control trigger for 3V-28V, RS232, and dry contact relays.

e. Low voltage 24V control unit with hand held IR remote three button control switch to stop or reverse screen at any point, built-in RF receiver, built-in Video Interface Control trigger for 3V-28V, RS232, and dry contact relays.

f. Key Operated power supply switch to control power to control system.g. Locking switch cover plate for limited access to three position switch.h. Key operated 3-position control switch rated 115V AC, 60 Hz to stop or reverse

screen at any point.i. 3-position low voltage control switch key locking cover plate rated 24V to stop

or reverse screen at any point.

11 52 13.50-8

j. Video Interface Control for use with equipment with a 115V switched outlet.k. Video Interface Control for use with equipment with a 12V switched outlet..l. Video Interface Control for use with equipment with a 6V switched outlet.m. Motor shall be right mounted (screen will be reverse rolled).n. Motor shall be left mounted.




c. Grey XH600V - On Axis gain of 0.6. Provides excellent contrast and color reproduction. GREENGUARD Gold certified.

d. Pearl White CH1900E - On Axis gain of 1.9. Matt white surface with reflective pearlescent coating.














11 52 13.50-9



tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable. Viewing surface inserted into aluminum bottom dowel. Warranted for 5 years against tab separation.

7. Viewing Area H x W.a. Custom Size: ________ H x ____________ W.b. NTSC Format (4:3). Black masking borders standard.










top border matching viewing surface color.9. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with


B. Artisan/Series E: Electric motor operated, hardwood or plastic laminate case. Wall or ceiling mounted. Housing designed with internal junction box and plug-in wiring connections to allow housing to be installed and connected to building power supply separately from motor and viewing surface.1. Case Options:

a. Hardwood Case1) Styles.

a) Radius.b) Rectilinear.c) Traditional.d) Bevel.

2) Solid Hardwood Case Material.a) Natural Maple.b) Natural Cherry.c) Light Oak.d) Medium Oak.e) Walnut.f) Medium Cherry.g) Mahogany.h) Custom Wood _________.

b. Plastic Laminate Case (7/16 inch particleboard, 45 lb. Density, rectilinear styling).

11 52 13.50-10

1) White.2) Beige3) Dove Grey.4) Burgundy.5) Black.6) Custom Color _________.

2. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.

3. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.








screen at any point.i. 3-position low voltage control switch with key locking cover plate rated 24V to

stop or reverse screen at any point.j. Video Interface Control for use with equipment with a 115V switched outlet.k. Video Interface Control for use with equipment with a 12V switched outlet..l. Video Interface Control for use with equipment with a 6V switched outlet.m. Motor shall be right mounted (screen will be reverse rolled).n. Motor shall be left mounted.








g. ClearSound White Weave XT900E - On Axis gain of 0.9. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Acoustical

11 52 13.50-11

properties are comparable to the highest quality speaker grille cloth. Some control of ambient light is recommended. Flame and mildew resistant.
















C. Silhouette/Series V: Electric motor operated, extruded aluminum case, tab tensioned. Wall or ceiling mounted. Contoured aluminum case with removable front cover, which conceals all mounting devices and fasteners including viewing surfaces that retract completely inside the case.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,

rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.




with cover plates to stop or reverse screen at any point. Automatic override

11 52 13.50-12

allows only one signal to reach the motor when operated simultaneouslyc. Low voltage control unit with three button 24V switches and cover plate to stop

or reverse screen at any point, built-in RF receiver, built-in Video Interface Control trigger for 3V-28V, RS232, and dry contact relays.






4. System Options:a. Contoured aluminum case finished in a white color.b. Contoured aluminum case finished in a light grey color.c. Contoured aluminum case finished in a black color.d. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.e. Projected Mounting Brackets with a 10/14 inch (254/356 mm) clearance from

wall.f. Wall Mount: Z-clip.g. Projected mounting brackets shall have a white finish.h. Projected mounting brackets shall have a black finish




c. Grey XH600V - On Axis gain of 0.6. Provides excellent contrast and color reproduction. GREENGUARD Gold certified. Available with or without black backing.

d. Pearl White CH1900E - On Axis gain of 1.9. Matt white surface with reflective pearlescent coating.




h. TecVision XH700X Grey - On Axis gain of 0.7. 180 degree viewing cone. Designed for blending applications on curved or flat screens where ambient light is present. Provides very good contrast and color reproduction. Imaging Science Foundation certified and 4K ready.

i. TecVision XT1100X White - On-Axis gain of 1.1. 180 degree viewing cone.

11 52 13.50-13

Designed for use when the projector brightness and size of screen require a minimal increase in gain. Imaging Science Foundation certified and 4K ready.

















1) 65 inch (1651 mm) 31-3/4 inches x 56-1/2 inches (806 mm x 1435 mm).2) 73 inch (1854 mm) 36 inches x 64 inches (914 mm x 1626 mm).3) 82 inch (2083 mm) 40-1/2 inches x 72 inches (1029 mm x 1829 mm).4) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032


mm)6) 106 inch (2692 mm) diagonal, 52 inches x 92 inches (1321 mm x 2337


11 52 13.50-14

mm)d. 16:10 Format. Black masking borders standard.






mm).8. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with



D. Silhouette/Series E: Electric motor operated, extruded aluminum case. Contoured aluminum case with removable front cover, which conceals all mounting devices and fasteners including viewing surfaces that retract completely inside the case.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,












4. System Options:a. Contoured aluminum case finished in a white color.b. Contoured aluminum case finished in a light grey color.

11 52 13.50-15

c. Contoured aluminum case finished in a black color.d. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.e. Projected Mounting Brackets with a 10 to 14 inch (254 to 356 mm) clearance

from wall.f. Projected mounting brackets shall have a white finish.g. Projected mounting brackets shall have a black finish

















1) 65 inch (1651 mm) diagonal, 31.75 inches x 56.5 inches (808 mm x 1435 mm).

2) 73 inch (1854 mm) diagonal, 36 x 64 inches (914 mm x 1626 mm)3) 82 inch (2083 mm) diagonal, 40.5 inches x 72 inches (1029 mm x 1829

mm).

11 52 13.50-16





d. 16:10 Format. Black masking borders standard.1) 67 inch (1702 mm) diagonal, 35-1/4 inches x 56-1/2 inches (895 mm x

1435 mm).2) 76 inch (1930 mm) diagonal, 40 inches x 64 inches3) 85 inch (2159 mm) diagonal, 45 inches x 72 inches (1143 mm x 1829







E. Premier: Electric motor operated, pentagonal-shaped steel case, tab tensioned. Metal roller mounted on rubber isolation mounts. Case for sizes through 12 feet x 12 feet AV, 200 inch NTSC, 184 inch HDTV and 189 inch 16:10, is one piece 22 gauge steel with end caps forming universal wall or ceiling hanging bracket. Case for sizes above 12 feet x 12 feet AV, 200 inch NTSC, 184 inch HDTV and 189 inch 16:10, consists of a curved front and L-shaped back/top cover fabricated of extruded aluminum, with endcaps forming ceiling hanging bracket. Case and tensioning dowel finished in flat black.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,










11 52 13.50-17



4. System Options:a. Case finished black (standard).b. Case finished white.c. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.

Finished black.d. Floating Mounting Brackets for mounting screen to wall or ceiling.e. Ceiling Trim Kit for recessing above acoustical tile ceiling grid.

5. Projection Viewing Surface: Mildew resistant 100 percent vinyl with black masking borders and 12 inch (305 mm) black drop.a. Matt White XT1000V - On Axis gain of 1.0. 180 degree viewing cone.



c. Grey XH600V - On Axis gain of 0.6. Provides excellent contrast and color reproduction. GREENGUARD Gold certified. Available with or without black backing.

d. Pearl White CH1900E - On Axis gain of 1.9. Matt white surface with reflective pearlescent coating and black backing.










n. TecVision XT1600X White - On Axis gain of 1.6. 180 degree viewing cone.

11 52 13.50-18

Imaging Science Foundation certified. 4K ready. Dark backing.o. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone.

Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 4K ready. Dark backing.






7. Viewing Area H x W. Black masking borders standard. 12 inch (305 mm) black drop standard.a. Custom Size: ________ H x ____________ W.b. NTSC Format (4:3).








mm).9) 210 inch (5.33 m) diagonal, 126 inches x 168 inches (3200 mm x 4267




mm).c. HDTV Format (16:9).



3) 82 inch (2083 mm) diagonal, 40-1/2 inches x 42 inches (1029 mm x 1067 mm).

4) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032

11 52 13.50-19








mm).12) 193 inch (4.90 m) diagonal, 94-1/2 inches x 168 inches (2400 mm x 4267


mm).d. 16:10 Format. Black masking borders standard.















F. Targa: Electric motor operated, steel case. Cases for sizes through 12 feet x 12 feet AV, 200 inch NTSC, 184 inch HDTV and 189 inch 16:10, are one piece 22 gauge steel with end caps forming universal wall or ceiling hanging bracket. Cases for sizes above 12 feet x 12 feet AV, 200 inch NTSC, 184 inch HDTV and 189 inch 16:10 consists of a curved front and L-shaped back/top cover fabricated of extruded aluminum, with endcaps forming ceiling hanging bracket. White scratch resistant textured finish.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,

rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-

11 52 13.50-20

set accessible limit switches.2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor

operates at 44db. UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.







f. Key Operated power supply switch to control power to control system.g. Locking switch cover plate for limited access to three position switch.h. Key operated 3-position control switch with key locking cover plate rated 115V

AC, 60 Hz to stop or reverse screen at any point.i. 3-position low voltage control switch rated 24V to stop or reverse screen at any

point.j. Video Interface Control for use with equipment with a 115V switched outlet.k. Video Interface Control for use with equipment with a 12V switched outlet..l. Video Interface Control for use with equipment with a 6V switched outlet.m. Motor shall be right mounted (screen will be reverse rolled).n. Motor shall be left mounted.

4. System Options:a. Case finished black (standard).b. Case finished white.c. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.

Finished white or black.d. Floating Mounting Brackets for mounting screen to wall or ceiling.e. Ceiling Trim Kit for recessing above acoustical tile ceiling grid.








g. ClearSound White Weave XT900E - On Axis gain of 0.9. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Acoustical properties are comparable to the highest quality speaker grille cloth. Some

11 52 13.50-21

control of ambient light is recommended. Flame and mildew resistant.h. ClearSound Grey Weave XH600E - On Axis gain of 0.6. 180 degree viewing

cone. Acoustically transparent woven blend of fiberglass and PVC. Grey material for higher contrast. Acoustical properties are comparable to the highest quality speaker grille cloth. Flame and mildew resistant.













mm).c. HDTV Format (16:9). Black masking borders standard.

1) 65 inch (1651 mm) diagonal, 31-3/4 inch by 56-1/2 inch (781 mm by 1435 mm).

2) 73 inch (1854 mm) diagonal, 36 inches x 64 inches (3) 82 inch (2083 mm) diagonal, 40-1/2 inches x 72 inches (4) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032







mm).

11 52 13.50-22


12) 193 inch (4.90 m) diagonal, 94-1/2 inches x 168 inches (2400 mm x 4268 mm).

13) 220 inch (5.59 m) diagonal, 106 inches x 188 inches (2692 mm x 4776 mm).

d. 16:10 Format. Black masking borders standard.1) 67 inch (1702 mm) diagonal, 35-1/4 inches x 56-1/2 inches (895 mm x

1435 mm).2) 76 inch (1930 mm) diagonal, 40 inches x 64 inches3) 85 inch (2159 mm) diagonal, 45 inches x 72 inches (1143 mm x 1829













2.4 FIXED, SURFACE MOUNTED, FRONT PROJECTION SCREENS

A. Scribe - Write-On Fixed Projection Screen: Magnetic whiteboard surface with low profile black bezel frame. Flush wall mounting with sliding brackets, integrated in the back of the frame. Includes tray, eraser, markers and liquid cleaner.1. Size Options: Image format 16:10

a. Image Diagonal: 87 inches (2210 mm).1) Viewable Area: 46-1/8 inches x 73-3/4 inches 1172 mm x 1873 mm).2) Overall Size: 46-5/8 inches x 74-1/4 inches (1184 mm x 1886 mm.

b. Image Diagonal: 68 inches (1727 mm).1) Viewable Area: 36 inches x 57-1/2 inches (914 mm x 1461 mm).2) Overall Size: 36-1/2 inches x 58 inches (927 mm x 1473 mm).

2. Size Options: Image format HDTV 16:9a. Image Diagonal: 94 inches (2388 mm).

1) Viewable Area: 46-1/8 inches x 82-1/8 inches (1172 mm x 2086 mm).2) Overall Size: 46-5/8 inches x 82-5/8 inches (1184 x 2091 mm.

b. Image Diagonal: 73 inches (1854 mm).1) Viewable Area: 36 inches x 64 inches (914 mm x 1626 mm).2) Overall Size: 36-1/2 inches x 64-1/2 inches (927 mm x 1638 mm).

PART 3 EXECUTION

11 52 13.50-23

3.1 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. Verify rough-in openings are properly prepared.

C. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

A. Clean surfaces thoroughly prior to installation.

B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

A. Install in accordance with manufacturer's instructions.

B. Install front projection screens with screen cases in position and relationship to adjoining construction as indicated, securely anchored to supporting substrate, and in manner that produces a smoothly operating screen with plumb and straight vertical edges and plumb and flat viewing surfaces when screen is lowered.

C. Test manually operated units to verify that screen operating components are in optimum functioning condition

D. Test electrically operated units to verify that screen, controls, limit switches, closure and other operating components are in optimum functioning condition.

3.4 PROTECTION

A. Protect installed products until completion of project.

B. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

11 52 13.50-24

Documents

· Web viewProjected Mounting Brackets with a 10/14 inch (254 ... Matching the viewing surface is standard for AV format, ... Universal hanging brackets for attachment to wall