Upload
vannga
View
213
Download
0
Embed Size (px)
Citation preview
What’s in the box . . .
Power cord
Soundtracksoundbar
Grille
Feet
On-wall brackets
Subwoofer feet and screws
Soundtracksubwoofer with cradle
(Adaptor for use in horizontal position, wired connection only)
#2 Phillips (not supplied)
3.5 mm Cable Remote
Paradigm, Soundtrack and associated proprietary and patented designs and technologies are registered trademarks of Paradigm Electronics Inc. Copyright © Paradigm Electronics Inc. All rights reserved. All other trademarks are the property of their respective owner(s). Paradigm Electronics reserves the right to change specifications and/or features without notice as design improvements are incorporated.
Paradigm Electronics Inc. 205 Annagem Blvd., Mississauga, ON Canada L5T 2V1
REV. 100912
For more information visit www.paradigm.com/shift
Set-Up Guide
The O�cial Sound of YOU™
Power cordDigital optical cableAmpli�ed Soundbar and Wireless Subwoofer
AB
Dual RCA cable
B C DYour Soundtrack System is capable of learning codes from remote controls you are using for other sources. See manual for details.
Paradigm_Soundtrack_Set-Up_Guide_EN.indd 1 12-10-09 2:33 PM
BEFORE YOU BEGIN, READ THE SAFETY PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS INCLUDED IN THE OWNERS MANUAL.
OPTIONAL Setting up the soundbar
To �nd your iOS version:SETTINGS GENERAL ABOUTIf your version is not 4.3, upgrade now.
YES
NO
50’or 15 Meters
Wireless Range
Wireless pairing
2 31
5
+ BASS
– BASS
+ BASS
– BASS
50’or 15 Meters
Wireless Range
1 2 3 4 5
+ BASS
– BASS
NOTE: Choose analogOR digital connections
OPTIONAL: For wall mounting instructions, refer to Owners Manual.
3.5-mm to mobile audio device,not included
Connecting to source Power connection
Adjust subwoofer loundness
Analog connection to TV (use for good audio)
Digital connection to TV (use for best audio)
B
C
*If the soundbar Wireless Status Indicator alternates between red and blue blinking, pairing has failed and the process must be repeated.
Power on, sync to subwoofer Wireless setting Power connection Wireless status indicator Adjust subwoofer loundness
Volume
Power
Input Selector
Wireless Sync
Attach the Feet Attach feet to subwoofer for horizontal positioning
TV
Lay your soundbar face down on a soft surface. Insert feet as shown, press �rmly until you hear a 'click'.
Attach the feet.
Your subwoofer’s LEVEL switch is set to 12 o’clock to suit average preferences. If desired, adjust up or down to match sound level of your speakers.
Move switch to “wireless” setting on subwoofer.
Connect to power source.Using the Remote or Onboard Interface. Turn Power ON and repeatedly press Input Selector until you hear audio. Press the Wireless Sync button to initiate connection to subwoofer. NOTE: Within 15 seconds plug in subwoofer.
The Wireless Status Indicator on the soundbar should blink blue for less than 30 seconds and then go back to normal operation.
Your subwoofer’s LEVEL switch is set to 12 o’clock to suit average preferences. If desired, adjust up or down to match sound level of your speakers.
Connect to power source.
C
A
B
E
Feet must be attached for heat dissipation clearance
#2 Phillips (not supplied)
2
*If the soundbar Wireless Status Indicator alternates between red and blue blinking, pairing has failed and the process must be repeated.
Wireless status indicator
The Wireless Status Indicator on the soundbar should blink blue for less than 30 seconds and then go back to normal operation.
1 Power on, sync to subwoofer
Volume
Power
Input Selector
Wireless Sync
Using the Remote or Onboard Interface. Turn Power ON and repeatedly press Input Selector until you hear audio. Press the Wireless Sync button to initiate connection to subwoofer.
50’or 15 Meters
Wireless Range
43 Wireless settingPower connectionMove switch to “wireless” setting on subwoofer.
Connect to power source.
D
Paradigm_Soundtrack_Set-Up_Guide_EN.indd 2 12-10-09 2:33 PM