• THREADLOCKERS • THREAD SEALANTS • … (Vibra-TITE) Interchange...• THREADLOCKERS • THREAD SEALANTS • RETAINING COMPOUNDS • LIQUID GASKETING • CYANOACRYLATES • ANTI-SEIZE

• THREADLOCKERS • THREAD SEALANTS

• RETAINING COMPOUNDS • LIQUID GASKETING

• CYANOACRYLATES • ANTI-SEIZE COMPOUNDS

• UV CURABLES • EPOXIES • AND MORE!

• THREADLOCKERS • THREAD SEALANTS

• RETAINING COMPOUNDS • LIQUID GASKETING

• CYANOACRYLATES • ANTI-SEIZE COMPOUNDS

• UV CURABLES • EPOXIES • AND MORE!

A Company You Can Rely On

Since 1955, ND Industries has been providing

top quality fastening and assembly related

products and services to a wide variety of

industries including automotive, electronics,

aerospace, appliance,

and many more.

ND's commitment to

improvement has led to

a continuous investment

in the best equipment,

facilities, and people to serve you.

A Single-Source Supplier

ND is a vertically integrated company and has

achieved a unique position in today’s market place with

a wide range of products designed to seal, cushion,

insulate, temporarily retain, and control noise and

vibration. ND's high quality line of products, customer

driven solutions and on-time-delivery is the reason why

more companies are turning to ND as their

single-source supplier.

Vibra-TITETM– A Trademark of ND Industries

Vibra-TITE is one of the world’s market leaders in

anaerobics, cyanoacrylates, epoxies and ultra-violet

technologies. Vibra-TITE is quickly becoming one of

the most highly respected names in the adhesive

industry. And, as a result

of ND’s low overhead

expenses and in-house

capabilities, Vibra-TITE

products offer the same

high quality and superior

performance of other name brand products

AT A COST SAVING OF UP TO 40%.

A Global Presence

ND owns and operates numerous facilities in North

America. ND’s latest state of the art expansion includes

facilities in Taiwan and China with licensees located

throughout the world. No matter where they are

located, each ND facility is a fully supported member of

the ND family dedicated to providing innovative,

affordable fastening and assembly related products

and services.

A Trademark of ND Industries

2

Table of Contents

Anaerobic Threadlockers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Vibra-TITE® VC-3TM Original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Thread Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9

Retaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11

Liquid Gasketing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Anti-Seize Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Cyanoacrylates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15

Light Cure Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Structural Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Primers, Accelerators & Activators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Epoxies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Hot-melts / Urethane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

MMA’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Vibra-TITE Specialty Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ND R & D, Chemical Blending, and Private Label Services . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21

ND Pre-Applied Products and Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23

Call: 800-521-2663 or visit: www.threadlockers.com or www.ndindustries.com®ND, ND logo and ND Industries are registered trademarks of ND Industries, Inc. Vibra-TITETM is a trademark of ND Industries, Inc. 3

4

AnaerobicTHREADLOCKERS

• Locks and seals threaded fasteners• Stops fasteners from loosening from shock and vibration• Performs better than lock washers, bevel washers, and

other forms of mechanical locking devices• Alleviates rust-lock• Prevents leakage

Vibra-TITE Available Loctite® Product Color Approx. Max Gap Torque Strength, Temperature Fixture Time Specific Suggested AgencyPart # Sizes Part # Description Viscosity (cP) (FILL, IN) Break/Prevail (in LB) Range (MIN) Gravity Primer Approvals111111 222222 LOW STRENGTH11102 2 ml bullet __ *__ Easy to remove – Purple 1,200/5,000 0.007 75/25 -65°F to +300°F 10 to 30 1.05 T or N MIL-S-46163A11110 10 ml bottle 21463 for fasteners smaller Thixotropic ASTM D-536311150 50 ml bottle 21464 than 1/4" in diameter. NSF11125 250 ml bottle __ *__11100 1L bottle __ *__112211 224422®® MEDIUM STRENGTH12102 2 ml bullet __ *__ Removable Grade Blue 1,200/5,000 0.007 120/45 -65°F to +300°F 10 to 30 1.07 T or N MIL-S-46163A12110 10 ml bottle 24221 for bolts 1/4" to 3/4” Thixotropic ASTM D-536312150 50 ml bottle 24231 in diameter. NSF12125 250 ml bottle 2424112100 1L bottle 24243112255 MEDIUM STRENGTH GEL

12535 35 ml pump Removable Grade Blue Gel 0.015 120/45 -65°F to +300°F 10 to 30 1.1 T or Nfor nuts or bolts1/4" to 3/4”in diameter.

112222 224433 OIL TOLERANT12202 2 ml bullet __ *__ Used on fasteners Blue 2,250-12,000 0.015 195/70 -65°F to +300°F 5-10 1.08 T or N12210 10 ml bottle 24077 from 1/4" to 3/4" Thixotropic12250 50 ml bottle 24078 in diameter.12225 250 ml bottle 2407912200 1L bottle 21433113311 226622 PERMANENT STRENGTH13102 2 ml bullet __ *__ Permanently locks Red 1,800/5,000 0.007 200/100 -65°F to +300°F 5 to 20 1.05 T or N MIL-S-46163A13110 10 ml bottle 26221 nuts or bolts up to Thixotropic ASTM D-536313150 50 ml bottle 26231 than 3/4” in diameter. NSF13125 250 ml bottle 2624113100 1L bottle 26243113355 PERMANENT STRENGTH GEL13535 35 ml pump Locks nuts or bolts Red Gel 0.015 200/100 -65°F to +300°F 5 to 20 1.1 T or N

up to 1/4”in diameter.

113377 227722 HIGH TEMP / HIGH STRENGTH13750 50 ml bottle 27240 Locks nuts and bolts up Red 9,500 0.007 300/250 -65°F to +450°F 5 to 60 1.11 T or N13725 250 ml bottle 27270 to 1 1/2” in diameter in13700 1L bottle 27285 high temp applications.114400 227711 HIGH STRENGTH14002 2 ml bullet __ *__ Permanently locks Red 500 0.007 250/275 -65°F to +300°F 10 to 30 1.10 T or N MIL-S-46163A 14010 10 ml bottle 27121 nuts or bolts ASTM D-536314050 50 ml bottle 27131 up to 1” in diameter.14025 250 ml bottle 2714114000 1L bottle 27143114466 227777 LARGE DIAMETER / HIGH STRENGTH14602 2 ml bullet __ *__ Permanently locks Red 7,000 0.010 300/250 -65°F to +300°F 10 to 20 1.12 T or N MIL-S-46163A 14610 10 ml bottle 21434 nuts or bolts up to ASTM D-536314650 50 ml bottle 27731 1 1/2” in diameter14625 250 ml bottle 2774114600 1L bottle 27743115500 229900 WICKING GRADE / MEDIUM STRENGTH15002 2 ml bullet __ *__ Used on pre-assembled Green 12 0.004 85/250 -65°F to +300°F 5 to 20 1.08 T or N MIL-S-46163A15010 10 ml bottle 29021 fasteners up to 1/2” in ASTM D-536315050 50 ml bottle 29031 diameter and porous NSF15025 250 ml bottle 29041 die castings.15000 1L bottle 29043

*Corresponding size not available.

NEW!

NEW!

TH

RE

AD

LO

CK

ER

S

Low StrengthTypical uses:

• Soft metal fasteners• Locking fasteners smaller

than ¼" in diameter.

Medium StrengthTypical uses:

• Locking nuts or bolts larger than ¼" in diameter.

High StrengthTypical uses:

• Permanently locking nuts or bolts larger than ¼" in diameter.

Wicking GradeTypical uses:

• Pre-assembled fasteners and porous die castings.

Call: 800-521-2663 or visit: www.threadlockers.com or www.ndindustries.comVibra-TITETM is a trademark of ND Industries, Inc. ®Loctite and Loctite 242 are registered trademarks of the Henkel Corporation

Anaerobic Threadlockers

Vibra-Tite Anaerobic Threadlockers lock and seal threaded fasteners. Liquid thread-lockers are considered to be themost effective method of lockingthreaded fasteners because theyutilize the entire assembly. Theyperform better than traditionalmechanical devices such as lockwashers preventing any loosen-ing from shock and vibration.

Vibra-TITE 111 Low Strength Threadlocker that eliminates vibrationalloosening and seals against leakage and corrosion. Ideal for use on assem-blies requiring periodic adjustment. Typical uses include soft metal fasteners,precision screws, and locking fasteners smaller than 1/4” in (6mm) diameter.COMPARE TO LOCTITE® 222

Vibra-TITE 121 Medium, Removable Strength Threadlocker that sealsnuts and bolts allowing disassembly using standard tools. Typical usesinclude locking nuts or bolts from 1/4” to 3/4” (6-60mm) in diameter.COMPARE TO LOCTITE 242®

Vibra-TITE 122 Medium Strength Threadlocker with greater oil tolerance.Typical uses include locking nuts or bolts ranging from 1/4” to 3/4” (20-60mm)in diameter. COMPARE TO LOCTITE 243

Vibra-TITE 131 High Strength Permanent Threadlocker for maximumsecurity suitable for most applications where disassembly is not required.Designed to withstand extreme environmental conditions and chemicalexposure. Ideal for the prevention of rust and corrosion. Typical uses includepermanently locking nuts or bolts up to 3/4” (60mm) in diameter. Heat andhand tools are needed for disassembly. COMPARE TO LOCTITE 262

Vibra-TITE 137 High Strength Threadlocker for maximum security thatwithstands temperatures to 4500 F. Typical uses include bolts up to 1 1/2” indiameter. Heat and hand tools are needed for disassembly.COMPARE TO LOCTITE 272

Vibra-TITE 140 High Strength Threadlocker for maximum security.Suitable for most applications where disassembly is not required. Typicaluses include permanently locking nuts or bolts up to 1” (25mm) in diameter.Heat and hand tools are needed for disassembly. COMPARE TO LOCTITE 271

Vibra-TITE 146 High Strength Threadlocker. Typical uses include perma-nently locking nuts or bolts up to 1 1/2” in diameter. Heat and hand tools areneeded for disassembly. COMPARE TO LOCTITE 277

Vibra-TITE 150 Wicking Grade, Medium Strength Threadlockerdesigned specifically for use on pre-assembled connections. Seals small gapsthrough capillary action. Typical uses include pre-assembled fasteners up to 1/2”in diameter and porous die castings. Protects welds from rust and corrosion. Handtools are needed for disassembly. COMPARE TO LOCTITE 290

5

2 ml ResealableBullet Tubes

15-25 Applications in each Tube!

NEWIntroduction!

NEWIntroduction!

100 ct. 2ml Bullet Tubesin handy counter-top fishbowl display. Available with 121 and 131 threadlockers.

AnaerobicThreadlockers

#13535 High Strength Threadlocker Gel

#12535 Medium Strength Threadlocker Gel

Part #12199VViibbrraa--TTIITTEE 121* Fishbowl with 100 ct. 2ml Bullet TubesMedium Strength Threadlocker *COMPARE TO LOCTITE® 242®

Part #13199VViibbrraa--TTIITTEE 131* Fishbowl with 100 ct. 2ml Bullet TubesMedium Strength Threadlocker*COMPARE TO LOCTITE® 262

No Mess! No Waste!

No-drip formulas

provide completecoverage

every time!

Part #12535Medium Strength Threadlockerin 35ml pump dispenser.Part #13535

High Strength Threadlockerin 35ml pump dispenser.

NEWIntroduction!

NEWIntroduction!

NEWIntroduction!

NEWIntroduction!

6

Vibra-Tite VC-3 Original meets or exceeds the performance requirements of the following

specifications and/or standards:

MILITARY • Mis-28867 • U.S. Air Force Part # 19207 • U.S. Army Tank Automotive Command

(General Dynamics) Part #11663357 • National Stock Number NSN-8030-00-163-5792

OEM • Detroit Diesel 9S244 & 9S256 • Grumman Aerospace Standard GF105VP1, CA1 • Allied Signal Aerospace Company Part #EMS73314

• Stops fasteners from loosening from extreme shock and vibration• Works with metal, wood, plastic and more• Fasteners are easily adjusted, removed and reused • Works on fasteners of any shape or size, from tiny eyeglass screws to large construction bolts• Works with internal or external threads

Not an Adhesive!Not an Anaerobic!Vibra-TITE VC-3 “Original” is apowerful locking and sealing coating forthreaded fasteners that works on theprinciple of "friction through viscosity".Vibra-TITE VC-3 Original utilizes aspecial blend of acrylic resins to preventfasteners from loosening even underthe stress of prolonged andextreme shock and vibration.Vibra-TITE VC-3 also works toresist leakage at fasteningpoints by acting as a dambetween mated threads.

Reusable 5 or more times!

Part #21330 – 30cc bottle withbrush/cap applicator.

Part #21325 – 250cc can.

One Tough Application!

This product is approved by TACOM* for use on the US Army’s main battle tank!*US Army Tank-automotive and Armaments Command Part# 11663357

TH

RE

AD

LO

CK

ER

S

Call: 800-521-2663 or visit: www.threadlockers.com or www.ndindustries.com®Vibra-TITE VC-3 Original is a registered trademark and Vibra-TITETM is a trademark of ND Industries, Inc.®Loctite and Loctite 242 are registered trademarks of the Henkel Corporation 7

Vibra-TITE VC-3 Original Specifications• Container size (manual application) . . . .1oz. (30 cc), 8 oz. (250 cc), or larger containers• Color . . . . . . . . . . . . . . . . . . . . . . . . . . . .Red (custom colors are also available)• Solvent . . . . . . . . . . . . . . . . . . . . . . . . . .Methyl ethyl ketone• Cured form . . . . . . . . . . . . . . . . . . . . . . .Resilient plastic• Shelf life . . . . . . . . . . . . . . . . . . . . . . . . .Indefinite (under ideal storage conditions)• Chemical resistance . . . . . . . . . . . . . . . .Offers resistance to most solvents (acts as a partial corrosion barrier)• Total resistance . . . . . . . . . . . . . . . . . . .Fresh and salt water• Dries to touch . . . . . . . . . . . . . . . . . . . . .In seconds• Dries for use . . . . . . . . . . . . . . . . . . . . . .In minutes• Drying method for bulk production . . . . .Best achieved using considerable airflow in addition to temperature

not exceeding 130oF• Operational temperature range . . . . . . .-65oF to +165oF (-54oC to +74oC)

For other temperature applications, please consult factory• Reusable . . . . . . . . . . . . . . . . . . . . . . . .5 or more times• Engagement torque . . . . . . . . . . . . . . . .Moderate• Breakaway . . . . . . . . . . . . . . . . . . . . . . .No distinct break; slow, fluid release as material cold flows• Standard coating length . . . . . . . . . . . . .1 to 1 1/2 times diameter• Lead thread requirement . . . . . . . . . . . .None• Thread fill requirement . . . . . . . . . . . . . .30 – 50% of the thread root areaNote: See MSDS for Safety & Material Handling Instructions

8

Vibra-TITE Available Loctite® Product Color Approx. Max Gap Sealing Pressure Temperature Cure Speed Suggested AgencyPart # Sizes Part # Description Viscosity (cP) (FILL, IN) (cP) (PSI) Range (MIN) Primer Approvals442200 556655//559922 INDUSTRIAL GRADE SEALANT42050 50 ml tube 56531/ Industrial grade, White 150,000 to 0.012 10,000 -65°F to +300°F 60 T or N_____ __________ 59231 controlled locking 550,000 42025 250 ml tube 56541/ strength, metal fit. (Paste)_____ __________ 59241 High temp & high 42016 16 oz. jar performance._____ with Brush Top __ *__42000 1L bottle 56543/

59243444400 554455 PNEUMATIC / HYDRAULIC SEALANT44050 50 ml bottle 54531 Pneumatic and Purple 16,000 0.007 10,000 -65°F to +300°F 30 T or N44025 250 ml bottle 54541 hydraulic sealant44000 1L bottle * for fluid, power

and gas system connections.

444444 556699 HYDRAULIC SEALANT44450 50 ml bottle 54531 Hydraulic sealant, Brown 300 to 500 0.007 10,000 -65°F to +300°F 10 T44425 250 ml bottle 54541 non shrink, high44400 1L bottle * vibration and shock

resistant.444466 555544 REFRIGERANT SEALANT44650 50 ml bottle __ *__ Refrigerant sealant. Red 6000 to 8000 10,000 -65°F to +300°F 10 T or N44625 250 ml bottle 55441 Maximum solvent 44600 1L bottle * resistance.446600 556677 HIGH TEMP / STAINLESS STEEL SEALANT46050 50 ml bottle 56747 General purpose White 350,000 0.012 10,000 -65°F to +400°F 60 T or N GM 118260746025 250 ml bottle 56765 stainless steel and NFS46000 1L bottle 56790 other inert metal

threaded pipe andfittings.

442277 557777 HIGH STRENGTH / YELLOW42750 50 ml tube 21456 High performance Yellow 420,000 0.012 10,000 -65°F to +300°F 90 T or N

sealant.


THREAD SEALANTS• Seals and secures metal pipes and fittings• Fills the space between threaded metal parts• Prevents leakage caused by tape shredding, vibration

loosening, solvent evaporation, damaged threads• Prevents corrosion and galling of threads• Low and high pressure applications• Seals to the pipe burst strength • Facilitates assembly• Service removable

NEW!

NEW!

NEW!

TH

RE

AD

SE

AL

AN

TS

Vibra-TITE 420 Industrial Grade Sealant cures rapidly with controlledlubricity preventing galling while protecting from corrosion and rust. Partsmay be repositioned up to 24 hours after assembly. Typical uses includestainless steel and all other metal fittings. COMPARE TO LOCTITE® 565/592

Vibra-TITE 440 Hydraulic & Pneumatic High Pressure Sealant withexcellent solvent resistance. It locks hydraulic and pneumatic connectionsproducing a high strength, high pressure seal, while allowing easy disassemblywith standard tools. Typical uses include pneumatic fittings, small pipethreads, and hydraulic fittings up to 2” in diameter. COMPARE TO LOCTITE® 545

Vibra-TITE 444 High Pressure Sealant is a general purpose pipe sealantthat creates an instant seal on threaded joints with a high resistance to sol-vents and withstands temperatures to 300o F (149o C). Typical uses: Smallpipe threads and hydraulic fittings. COMPARE TO LOCTITE® 569

Vibra-TITE 446 High Pressure Sealant – Refrigerant Sealant providesexcellent resistance to solvents on threaded pipes and fittings up to 3” indiameter. Typical uses include refrigeration systems and service with volatilechemicals. COMPARE TO LOCTITE® 554

Vibra-TITE 460 PTFE Instant Pipe Sealant prevents galling and providesan instant low pressure seal on coarse fitting threads which is furtherstrengthened as the product cures. Assembled parts can withstandtemperatures up to 400o F and may be repositioned up to 24 hours afterassembly. Typical uses include stainless steel, aluminum, galvanized metaland other inert metal threaded pipe fittings. COMPARE TO LOCTITE® 567

Vibra-TITE 427 High Pressure Yellow Sealant – High Viscosity locksand seals threaded fittings with high performance withstanding temperaturesup to 300oF.

Benefits :• Lubricates during assembly• Seals regardless of assembly torque• Seals to the burst rating of the pipe• Provides controlled disassembly

torque• Easy dispensing• Good chemical and temperature

resistance, 300°F (150°C)• Instant seal• Seals and secures metal fittings

Typical Applications:• Fire protection industry• Chemical processing industry• Petroleum refining industry• Waste treatment facilities• Utilities and power generation • Gas compression and

distribution• Automotive and industrial

equipment

Thread SealantsSeal up to Pressures of 10,000 psi

Call: 800-521-2663 or visit: www.threadlockers.com or www.ndindustries.comVibra-TITETM is a trademark of ND Industries, Inc. ®Loctite and Loctite is a registered trademark of the Henkel Corporation 9

Vibra-Tite AnaerobicThread Sealants seal and secure metal pipes and fittings, by filling the spacebetween threaded metal parts.Thread sealants prevent leakagecaused by tape shredding,vibration loosening, solventevaporation, and damagedthreads. Vibra-TITE products aredesigned for both low and highpressure applications. Threadsealants seal to the burst strengthof most piping systems. Becauseof the lubricating properties,Vibra-TITE thread sealants makeit easy to assemble fittings aswell as prevent galling of thethreads. For repairs, parts maybe disassembled with basic handtools.

RETAINING COMPOUNDS

10

Vibra-TITE Available Loctite® Product Color Approx. Max Gap Shear Strength Temperature Fixture Time Specific Suggested AgencyPart # Sizes Part # Description Viscosity (cP) (FILL, IN) (PSI) Range (MIN) Gravity Primer Approvals553300 660099//667755 GENERAL PURPOSE RETAINING COMPOUND53002 2 ml bullet __ *__ Retaining Compound Green 125 0.005 >2000 -65°F to +300°F 10 to 20 1.10 T or N MIL-R-4608253010 10 ml bottle 60921 Typical uses: rotors, ASTM D-536353050 50 ml bottle 60931 augment press fits, GM-118302453025 250 ml bottle 60941/ shafts, bushings,_____ __________ 67541 bearings, and pulleys.53000 1L bottle 60943553388 663388 HIGH STRENGTH RETAINING COMPOUND53850 50 ml bottle 21448 High strength for loose Green 2500 0.015 >4000 -65°F to +300°F 5 1.09 T or N53825 250 ml bottle 21449 fitting parts.53800 1L bottle *554411 668800 HIGH STRENGTH RETAINING COMPOUND54110 10 ml bottle 68015 High strength gap filling Green 1200 0.015 >3000 -65°F to +300°F 20 to 40 1.11 T54150 50 ml bottle 68035 product. Permanently54125 250 ml bottle 68060 retains slip-fit.54100 1L bottle 68090 Typical uses:

rotors, shafts,impellers, and splines.

554422 663355 HIGH STRENGTH RETAINING COMPOUND54210 10 ml bottle __ *__ High viscosity Green 2000 0.015 >4000 -65°F to +300°F 20 to 40 1.05 T MIL-R-4608254250 50 ml bottle 63531 permits larger machine ASTM D-536354225 250 ml bottle 63541 tolerances.Typical uses:54200 1L bottle * rotors, shafts, impellers,

and splines.554466 NN//AA IMPACT RESISTANT RETAINING COMPOUND

54650 50 ml bottle __ *__ Flexible for impact Green 600 0.015 >2000 -65°F to +300°F 20 to 40 1.09 N54625 250 ml bottle __ *__ resistance.54600 1L bottle *554488 664488 RAPID CURING RETAINING COMPOUND

54850 50 ml bottle 21444 Fast fixturing for close Green 500 0.007 >3500 -65°F to +350°F 5 1.09 T or N54825 250 ml bottle 21445 fitting parts, high 54800 1L bottle * strength for

stainless steel.555500 1111335588 CORE PLUG SEALANT

55050 50 ml bottle 11358 Blue 8500 0.02 >2300 -65°F to +300°F 10 to 20 1.09 N556600 664400 HIGH TEMPERATURE RETAINING COMPOUND

56010 10 ml bottle __ *__ High strength adhesive Green 600 0.007 >3000 -65°F to +400°F 5 to 60 1.12 T or N MIL-R-4608256050 50 ml bottle 64031 Typical uses: rotors, ASTM D-536356025 250 ml bottle 64041 shafts, bushings,56000 1L bottle * bearings, and pulleys.556677 662200 HIGH TEMPERATURE RETAINING COMPOUND

56710 10 ml bottle 62015 High strength adhesive Green 7000 0.015 >3500 -65°F to +450°F 20 to 30 1.16 T or N GM-118302656750 50 ml bottle 62040 Typical uses: rotors,56725 250 ml bottle 62070 shafts, bushings,56700 1L bottle 62085 bearings, and pulleys.


• Increases the shear strength on non-threaded,cylindrical metal assemblies

• Fills voids between close-fitting metal assemblies• Creates a solid one-piece assembly• Seals joints against leakage• Prevents corrosion

RE

TAIN

ING

RetainingCompounds

Vibra-TITE 530 General Purpose Retaining Compound bonds metalassemblies. A low viscosity retaining compound recommended for diametral gapdistances up to 0.005” to augment press fits. Withstands temperatures of up to 300o

F providing a shear strength of 3,000psi after 24 hours with a fixture time of10 minutes. Typical uses: Rotors, shafts, bushings, bearings, and pulleys.COMPARE TO LOCTITE® 609/675

Vibra-TITE 538 Slip Fit / High Strength Retaining Compound – maximumstrength for use where high dynamic force or cyclic loading is anticipated.COMPARE TO LOCTITE® 638

Vibra-TITE 541 High Strength Retaining Compound that cures in room tem-peratures filling diametral gaps up to 0.015”. Typical uses include fitted cylindricalparts replacing set screws, clamp rings, and snap rings. It provides a shearstrength greater than 3,000psi after 24 hours with a fixture time of 10 minutes.COMPARE TO LOCTITE® 680

Vibra-TITE 542 High Strength Retaining Compound is a high viscosityretaining compound that allows parts to be adjusted during assembly. It provides ashear strength greater than 4,000psi. Typical uses include slip fit components,rotors, shafts, impellers, and splines. COMPARE TO LOCTITE® 635

Vibra-TITE 546 Substantial Impact Resistance – flexible for high shock/impactperformance from hub to rotor.

Vibra-TITE 548 Press Fit / Rapid Cure – works with continuous operatingtemperatures up to 350OF. It provides a shear strength greater than 3,500psi.COMPARE TO LOCTITE® 648

Vibra-TITE 550 Core Plug Sealant COMPARE TO LOCTITE® 11358

Vibra-TITE 560 High Temperature Retaining Compound is a high temperature(400o F), high strength adhesive for retention of cylindrical components, wheredisassembly is not required on press-fit assemblies. It provides a shear strengthgreater than 3,000psi. Typical uses: Rotors, shafts, bushings, bearings, and pulleyswith temperatures up to 400OF. COMPARE TO LOCTITE® 640

Vibra-TITE 567 High Temperature Retaining Compound locks metalcylindrical assemblies with diametral clearances up to 0.015”. Provides a shearstrength greater than 3,500 psi on steel sealing against leakage while preventingcorrosion. Typical uses: Rotors, shafts, bushings, bearings, and pulleys.COMPARE TO LOCTITE® 620

Vibra-Tite Anaerobic Retaining Compoundsare designed to increase shear strength on non-threaded,cylindrical metal assemblies.The liquid anaerobic materialfills voids between close-fittingmetal assemblies. It cures to atoughened thermoset-plasticwhich creates a solid onepiece assembly. Retainingcompounds seal jointsagainst leakage and preventcorrosion. These materialshave gained wide acceptanceas a standard method forassembling press-fit andslip-fitted parts.

Benefits:• Reduce machining costs• Press/shrink fits can be replaced

with slip fits• No expensive finishes required• Increase mechanical strength

of the assembly• 100% surface contact• Retains and seals, eliminate

corrosion and seizure • Restore fit to worn or out-of-

tolerance assemblies• Eliminate part replacement• Part distortion is eliminated

Typical Applications• Mount bearings in housings or shafts• Mount motors, gears, sprockets and pulleys on shafts

• Retain cylindrical linings• Replace keys and set screws• Augment slip fits• Lock keyways• Secure splines, Bushings, Bearings,

Oil seals, Water pumps, Core plugs


LIQUID GASKETINGForm-In-Place Gasket for close fitting rigid metalflanges. Ideal for flanges that move in service.

Vibra-TITE Available Loctite® Product Color Approx. Max Gap Temperature Cure Speed Specific Suggested AgencyPart # Sizes Part # Description Viscosity (cP) (FILL, IN) Range Gravity Primer Approvals770099 550099 GASKET MAKER70950 50 ml tube * Flexible flange sealant Blue 65,000/ Unprimed: -65°F to +300°F Unprimed: 1.12 T or N N/A

withstands minor 200,000 0.010 6 - 48 hrs.movements caused by Thixotropic Primed: Primed:vibrations. Fluorescent 0.020 1 - 6 hrs.blue color aid visualassembly inspections.

771100 551100 HIGH TEMPERATURE RIGID FLANGE SEALANT71050 50 ml tube 51031 High temperature Red 188,000/ Unprimed: -65°F to +400°F Unprimed: 1.16 T or N N/A71025 250 ml tube 51041 rigid flange sealant 500,000 0.010 4 - 24 hrs.

withstands temperatures Thixotropic Primed: Primed:to 400°F with excellent 0.020 30 min. - 4 hrs.chemical and solventresistance.

773300 551188 FLEXIBLE GASKET MAKER73050 50 ml tube 51831 Solvent resistant – Red 800,000/ Unprimed: -65°F to +300°F Unprimed: 1.13 N GM-118286373025 250 ml tube __ *__ Aluminum flange 3,750,000 0.010 1 - 12 hrs.73030 300 ml 51845 surfaces, flexible Thixotropic *Primed: Primed:

cartridge parts.Flexible gasket 0.050 15 min. - 2 hrs.for rigid machine flanges.Eliminates pre-formed,pre-cut paper, rubber and cork gaskets.

773322 551155 FLEXIBLE GASKET MAKER73250 50 ml tube 51531 General purpose Purple 275,000/ Unprimed: -65°F to +300°F Unprimed: 1.10 N N/A73225 250 ml tube * gasket maker that 950,000 0.010 4 - 24 hrs.

flexes with flanges. Thixotropic *Primed: Primed:Eliminates pre-formed, 0.050 30 min. - 4 hrs.pre-cut paper, rubber and cork gaskets.


VViibbrraa--TTIITTEE Anaerobic Liquid Gasketing is designedprimarily for close fitting (small gap) rigid metal flanges.The Anaerobic material remains liquid when exposed toair, but cures when confined between mating flanges.

Anaerobic liquid gasketing can fill gaps of 0.050(primed) and alleviates the need for preformed gaskets.It is ideal for flanges that move in service and can beused as form-in-place gaskets.

Typical Applications:Can be used as a Form-In-Place Gasket for:• Thermostats • Compressors• Pumps • Transmission housings• Gearboxes • Axle covers

Benefits:• Remains liquid when exposed to air• Cures when confined between mating flanges • Can fill gaps as large as 0.050*• Alleviates the need for preformed gaskets

12

The Anti-Seize 907 family of lubricantsis specially formulated to preventseizing, galling, pitting, excessive wear,and corrosion. The lubricating formulationis a protective paste consisting of fineflakes of graphite suspended in a blendof lubricants and oils. It will not wash,squeeze or burn out, even at elevatedtemperatures and high pressures.

The Anti-Seize 907 family of lubricantsis specially formulated to preventseizing, galling, pitting, excessive wear,and corrosion. The lubricating formulationis a protective paste consisting of fineflakes of graphite suspended in a blendof lubricants and oils. It will not wash,squeeze or burn out, even at elevatedtemperatures and high pressures.

ANTI-SEIZE LUBRICANTS

1) 907A Aluminum-graphite is a general purpose lubricant.Resists seizing, galling, galvanicattack, and excessive wear.

2) 907C Copper-graphite is ageneral purpose lubricant. Idealfor soft metal parts, plastics andnonmetallic gasketing.

3) 907N Nickel-graphite is a high temperature lubricant suitable wheredifferent metals (such as brass and steel)come in contact. This product is alsoavailable Pre-Applied.

Versatile: Vibra-TITE Anti-Seize 907 is available in four different formulas:

Vibra-TITE Available Loctite® Product Color Approx. Temperature K-Value AgencyPart # Sizes Part # Description Viscosity (cP) Resistance Approvals907A Silver ANTI-SEIZE COMPOUND ALUMINUM

__90702__ 2 ml bullet__ __ *__ Lubricant ideal for all Silver 120,000 - 1600°F (871°C) 0.18 MIL A-907E90704 4 oz. 80209 metals to prevent 175,000 GM-6108M

___________ brush-top can _____ seizing, galling and Paste90708 8 oz. 76732 excessive wear.

___________ brush-top can ______ Resists harsh chemical 90706 16oz. 76764 environments.

brush-top can907C C5-A ANTI-SEIZE COMPOUND COPPER

__90712__ 2 ml bullet__ __ *__ Lubricant ideal for use Copper 120,000 - 1800°F (982°C) 0.1690713 3 oz tube __ *__ on softer metal parts 175,00090714 4 oz. 51144 such as copper and Paste

___________ brush-top can ______ brass. Protects from 90718 8 oz. 51147 rust and corrosion as

___________ brush-top can ______ well as prevents 90716 16oz. 51007 seizing, galling and

brush-top can excessive wear.Excellent resistanceto harsh chemicalenvironments.

907N Nickel ANTI-SEIZE COMPOUND NICKEL__90722__ 2 ml bullet__ __ *__ Lubricant ideal for Silver 500,000 - 2400°F (1315°C) 0.13

90724 4 oz. extreme temperature 350,000___________ brush-top can __ *__ copper free base. Paste

90728 8 oz. 77124 Resistant to harsh___________ brush-top can ______ chemical environments.

90726 16oz. 77164 Excellent for stainlessbrush-top can steel and other metal

fittings.


2 ml Bullet TubesMultiple Applications in each Tube!

NEW!

NEWIntroduction!

NEWIntroduction!

GA

SK

ET

ING

& L

UB

RIC

AT

ING


#39502 2ml Resealable Bullet Tubes15-25Applications in each Tube!

Typical Applications• Wire tacking on PC boards• Ceramic, fabric, metal and leather bonding• Bonding molded parts such as

automotive weather striping, wiper blades• Speaker cones• Identification tags to equipment• Bonding control panel switches• Bond rubber pads to equipment base or legs

CYANOACRYLATESare single-part clear adhesives that rapidlypolymerize at room temperature and developstrength extremely fast (fixture 0 to 60seconds). They are initiated by moisture onthe parts surface or by accelerators.

Cyanoacrylates, commonly known asSuper Glues, are highly useful in virtuallyevery industry. Some of the higher volumeapplications include printed circuit boardwires and a broad range of medicaldevices.

OEM applications include small and largeappliances, automotive applications, toys,and cosmetic packaging.

MRO applications include repair ofplastic, rubber and metal parts.

Everyday consumers are a large volumeuser of Super Glues for use and repair oneverything from crafts to broken toys andhousehold gadgets.

14

Factors that Effect CA Performance• Low humidity = slower cure speed• Low viscosity for small gaps• Difficult to bond surfaces: Teflon, Silicone,

Polyethylene, Polypropylene • Excess adhesive - Less is best

Call: 800-521-2663 or visit: www.threadlockers.com or www.ndindustries.comVibra-TITETM is a trademark of ND Industries, Inc. ®Loctite and Loctite is a registered trademark of the Henkel Corporation

NEWIntroduction!

NEWIntroduction!

CY

AN

OA

CR

YL

AT

ES

15

Vibra-TITE Available Loctite® Product Category Color Approx. Max Gap Shear Temperature Fixture Specific AgencyPart # Sizes Part # Description Viscosity (cPA) (FILL, IN) Strength (PSI) Range Time Gravity Approvals

GENERAL PURPOSE INSTANT SUPERGLUE332200 442200

32002 2 ml bullet __ *__ Wicking type plastic Ethyl Clear 2 0.002 2,900 -65°F to +180°F 20 1.05 A-A3097 Type II32028 1 oz bottle 42050 bonder. seconds CL1 Ethyl32054 1 lb bottle 42061 CL 2 Ethyl_______________________________________________________________________________________________________________________________________________________________339955 449955

39502 2 ml bullet __ *__ General purpose. Ethyl Clear 45 0.004 2,750 -65°F to +180°F 20 1.05 A-A3097 Type II39528 1 oz bottle 49550 seconds CL1 Ethyl 39554 1 lb bottle 49561 GM-1183022_______________________________________________________________________________________________________________________________________________________________331144 441144

31402 2 ml bullet __ *__ Plastic bonder. Ethyl Clear 110 0.006 3,200 -65°F to +180°F 20 1.05 GM-118302331428 1 oz bottle 4145031454 1 lb bottle 41461 seconds_______________________________________________________________________________________________________________________________________________________________336622 449988

36202 2 ml bullet __ *__ Thermal cycling. Ethyl Clear 125 0.006 3,600 -65°F to +180°F 30 1.09 N/A36220 20 gm bottle __ *__ seconds36254 1 lb bottle 49861_______________________________________________________________________________________________________________________________________________________________330000

30002 2 ml bullet General purpose. Ethyl Clear 250-350 0.006 2,500-3000 -65°F to +180°F 20 1.05 N/A30028 1 oz tube seconds30054 1 lb bottle _______________________________________________________________________________________________________________________________________________________________334444 444444

34402 2 ml bullet __ *__ Wire tacking. Ethyl Clear 700 0.002 2,900 -65°F to +180°F 30 1.05 N/A34428 1 oz bottle __ *__ seconds34454 1 lb bottle 12294_______________________________________________________________________________________________________________________________________________________________331166 441166

31602 2 ml bullet __ *__ Gap filling Clear 1,500 0.008 3,200 -65°F to +180°F 30 1.05 A-A3097 Type II31628 1 oz bottle 41650 plastic bonder. Ethyl seconds CL3 Ethyl31654 1 lb bottle 41661_______________________________________________________________________________________________________________________________________________________________332222 442222

32202 2 ml bullet __ *__ Gap filling plastic Ethyl Clear 2,500 0.008 3,200 -65°F to +180°F 30 1.09 A-A3097 Type II32228 1 oz bottle 42250 bonder. seconds CL3 Ethyl32254 1 lb bottle 42261_______________________________________________________________________________________________________________________________________________________________331111 338822

31102 2 ml bullet __ *__ Gap filling – Ethyl Clear 5,000 0.008 3,200 -65°F to +180°F 30 1.05 N/A31120 20 gm bottle 38240 wire tacking seconds31154 1 lb bottle 38261_______________________________________________________________________________________________________________________________________________________________330099 440099

30903 3 gm tube __ *__ General purpose gel. Ethyl Clear Thixo Gel 0.01 3,200 -65°F to +180°F 75 1.10 A-A3097 Type II30920 20 gm tube 40945 seconds CL3 Ethyl

SURFACE INSENSITIVE SUPERGLUE330066 440066

30602 2 ml bullet __ *__ Surface Insensitive Ethyl Clear 20 0.004 3,200 -65°F to +180°F 15 1.05 N/A30620 20 gm bottle 40640 wicking grade. seconds30654 1 lb bottle 40661_______________________________________________________________________________________________________________________________________________________________330011 440011

30102 2 ml bullet __ *__ General purpose Ethyl Clear 90-120 0.005 3,200 -65°F to +180°F 15 1.05 N/A30120 20 gm bottle 40140 surface Insensitive. seconds30154 1 lb bottle 40161_______________________________________________________________________________________________________________________________________________________________336600 44447711

36020 20 gm tube __ *__ Surface Insensitive. Ethyl Clear 500-600 0.007 3,000-3,500 -65°F to +180°F 15 1.0536054 1 lb bottle * seconds_______________________________________________________________________________________________________________________________________________________________333311

33120 20 gm tube __ *__ Surface Insensitive. Ethyl Clear 1,000-1,500 0.002 3,000-3,500 -65°F to +180°F 15 1.05 N/A33154 1 lb bottle * seconds_______________________________________________________________________________________________________________________________________________________________335544 445544

35403 3 gm tube 45404 Surface Insensitive Ethyl Clear Thixo Gel 0.01 3,000-3,500 -65°F to +180°F 30 GM-118302135420 20 gm tube 45440 for porous surfaces. seconds

TOUGHENED SUPERGLUE338888 338800

38802 2 ml bullet __ *__ Close fitting parts. Ethyl Black 300 0.006 3,750 -65°F to +225°F 90 1.10 GM-118302538828 1 oz bottle 38050 seconds38854 1 lb bottle 38061_______________________________________________________________________________________________________________________________________________________________331100 441100

31002 2 ml bullet __ *__ Gap filling. Ethyl Black 3,500 0.008 3,200 -65°F to +180°F 90 1.07 N/A31020 20 gm bottle 41045 seconds31054 1 lb bottle 41061

METAL AND RUBBER BONDER333300 443300

33028 1 oz bottle 43050 Metal bonder for Methyl Clear 80 0.005 3,600 -65°F to +180°F 30 1.09 A-A3097 Type I 33054 1 lb bottle 43061 close fitting parts. seconds CL 2 Methyl


See page 18 for Vibra-TITE Accelerators and other surface preparation products.

CYANOACRYLATES

LIGHT CUREADHESIVES Benefits:

• Almost instant cure• Some cure with very low intensity• Flexible or rigid products available• High optical clarity & non-yellowing • Bond a wide range of substrates• Will not shadow-cure

Typical Applications• Jewelry-crystal and stone setting• Glass ornaments, house-hold

objects and more• One of the substrates must be clear

and transmit UV light

Special Note• Vibra-TITE Light Cure Adhesives

are available in 10 ml and 30 ml syringes if needed.

Vibra-TITE Light Cure Adhesivesare single part photo-initiatedcuring acrylates that cure ondemand when exposed to UV-light.

16 Call: 800-521-2663 or visit: www.threadlockers.com or www.ndindustries.comVibra-TITETM is a trademark of ND Industries, Inc. ®Loctite and Loctite is a registered trademark of the Henkel Corporation

Vibra-TITE Available Loctite Product Cure Type Color Key Viscosity Elongation Shore Temperature Fixture Shear SuggestedPart # Sizes Part # Description Substrates Brookfield (cP) At Break (%) Hardness Range Time Strength (PSI) Activator221111 LIGHT CURE ADHESIVE 21150 50 ml bottle Low viscosity glass Ultraviolet/ Clear Glass 100 100 D 80 -65°F to 10 230021100 1 L bottle bonder. Visible +250°F Seconds222200 LIGHT CURE ADHESIVE

22050 50 ml bottle Medium viscosity Ultraviolet/ Amber Glass 1,200 -65°F to 3 200022025 250 ml bottle Glass bonder. Visible +250°F Seconds22000 1 L Bottle222299 334499 LIGHT CURE ADHESIVE

22950 50 ml bottle 34931 High viscosity Ultraviolet Clear/ Glass, Metal 9,500 300 D 70 -65°F to 1,60022900 1 L bottle 34990 Glass bonder. Straw +266°F220088 UV STRUCTURAL ADHESIVE 20850 50 ml bottle Impact resistant UV/ Opaque Glass, Gel 100 D 70 -65°F to 10 2500 63820800 1 L bottle gel. Primer Metal +250°F Seconds223300 335522 UV STRUCTURAL ADHESIVE

23050 50 ml bottle 35241 Impact resistant Ultraviolet/ Clear/ Glass, Metal 19,500 290 D 60 -65°F to 2,400 600/63823000 1 L bottle 35286 adhesive. Heat/ Light +374°F

Activator Amber229911 33992211 ACRYLIC UV/VISIBLE WITH FLUORESCENCE

29150 50 ml bottle __ *__ Medical device Ultraviolet/ Clear to Glass, Metal 150 -65°F to29100 1 L bottle 36485 bonder. Visible Hazy/ Thermoplastic, +300°F

Fluorescent Polycarbonate,Polyvinylchloride

229977 33997711 ACRYLIC UV/VISIBLE WITH FLUORESCENCE29750 50 ml bottle __ *__ Needle bonder. Ultraviolet/ Clear to Metal 320 -65°F to29700 1 L bottle 36805 Visible Hazy/ Thermoplastic, +300°F

FluorescentPolyvinylchloride,Polyurethane

225500 LIGHT CURE ADHESIVE 25050 50 ml bottle Doming product for Ultraviolet/ Clear Plastics 6,00025000 1 L bottle plastics. Visible225555 LIGHT CURE ADHESIVE 25550 50 ml bottle Doming product for Ultraviolet/ Clear Metals 6,00025500 1 L bottle metals. Visible229944 LIGHT CURE ADHESIVE 29450 50 ml bottle __ *__ UV plastics bonder. Ultraviolet/ Clear Plastics 7,500 300 D 60 -55°F to 3 300029400 1 L bottle * Visible +188°F Seconds226655 LIGHT CURE ADHESIVE 26550 50 ml bottle Light tacking Ultraviolet/ Clear Glass, 200 10 -65°F to 3 290026500 1 L bottle adhesive. Visible Plastics +188°F Seconds221155 LIGHT CURE ADHESIVE 21550 50 ml bottle UV/Visible potting Ultraviolet/ Clear Glass, 8,000 200 521500 1 L bottle material. Visible Plastics Seconds


BO

ND

ING

PR

OD

UC

TS

STRUCTURAL ADHESIVES

Vibra-TITETM is a trademark of ND Industries, Inc. ®Loctite is a registered trademark of the Henkel Corporation. 17

Vibra-TITE Available Loctite® Product Color Viscosity (cP) Max Gap Shear Temperature Fixture Time Specific Suggested Part # Sizes Part # Description at 20 RPM (FILL, IN) Strength (PSI) Range Gravity Activator

221122 331122 NO-MIX STRUCTURAL ACRYLICS21250 50 ml bottle 31231 Fast cure on close Amber 1,000 0.003 3,000 -65°F to +300°F 30 seconds 1.08 63821200 1 L Bottle 31243 fitting parts.222255 332255 NO-MIX STRUCTURAL ACRYLICS

22550 50 ml bottle 32530 Severe environment Trans- 20,000 0.040 2,200 -65°F to +300°F 5 minutes 1.11 63822500 1 L bottle 32586 applications. parent

Solvent resistant. DarkBrown

222266 332266 NO-MIX STRUCTURAL ACRYLICS22650 50 ml bottle 32629 Fast fixturing Trans- 18,000 0.0420 3,500 -65°F to +250°F 1 minute 1.10 63822600 1 L bottle 32685 applications. parent

DarkBrown

223333 333300 NO-MIX STRUCTURAL ACRYLICS23325 25 mlcartridge __ *__ Rough or porous Pale 67,500 0.005 3,300 -65°F to +250°F 5 minutes 1.05 63823300 1 L bottle 33081 surfaces. Yellow224400 339922 NO-MIX STRUCTURAL ACRYLICS

24050 50 ml bottle 39250 Fast fixturing Amber 6,500/17,500 0.025 2,500 -65°F to +300°F 1 minute 1.16 638 / 60024000 1 L Bottle 39280 magnet bonder. Thixotropic227744 NO-MIX STRUCTURAL ACRYLICS

27450 50 ml bottle Amber 3200 0.01 2,300 -65°F to +250°F 1 minute 1.1 61127400 1 L Bottle

Vibra-TITE Available Loctite® Product Color Viscosity Base On-Part Life Dry Time ApplicationPart # Sizes Part # Description (cP)

660000 77338800 Structural Activator60028 1 oz bottle __ *__ Structural Light 43 Monomer 2 Hrs None Structurals60025 250 cc bottle __ *__ activator. Brown60000 1 L *663388 77338877 Structural Activator

63800 1 L * General structural Light 1.5 Heptane/ 2 Hrs None Structuralsactivator. Brown Isopropanol

661111 77664499 Excel Primer N61102 2 oz bottle __ *__ General purpose Clear/ 2 Acetone 30 Days 30-70 Seconds Anaerobics61108 8 oz bottle __ *__ primer. Green61100 1 gal can 19266661122 77447711 Excel Primer T61202 2 oz bottle __ *__ Fast acting Amber Acetone/ 7 Days 30-70 Seconds Anaerobics61208 8 oz bottle __ *__ primer. 2 Isopropanol61200 1 gal can 19268662211 77111133 Excel Accelerator

62102 2 oz bottle __ *__ Clear 0.4 Heptane 24 Hrs 1 Minute All62104 4 oz bottle __ *__ Cyanoacrylates62108 8 oz bottle __ *__62100 1 gal can 19606662233 Excel Accelerator62302 2 oz bottle General purpose Clear/ 1 Heptane 1 Minute 1 Minute All62304 4 oz bottle accelerator. Amber Cyanoacrylates62308 8 oz bottle 62300 1 gal can662244 771122 Excel Accelerator62402 2 oz bottle __ *__ Accelerator for Clear/ 1 Isopropanol 1 Minute <30 Seconds All62404 4 oz bottle __ *__ plastics. Amber Cyanoacrylates62408 8 oz bottle __ *__62400 1 gal can 18390


Structural Adhesives, a Methacrylate technology,are room temperature curing, 2-part, no-mix systemscomprised of resin and hardener that form structuralbonds on metal, composite, plastic, wood, ceramic &many other substrates. They are ideal for parts whereextended open time is needed.

Benefits:• Kits comprise brush-on initiator

and resin (from a syringe)• Toughened - high peel strength

and impact resistance• Very rapid curing• Rapid curing • High shear strength• Good chemical resistance

Vibra-TITE surfacepreparation productspromote maximumperformance ofadhesives and sealants.

Primers, Accelerators & Activators

18

Hot-melts

Hot-melts / Urethane

Vibra-TITE Available Product Color Viscosity (cP) Max Gap Shear Temperature Fixture Time SpecificPart # Sizes Description (FILL, IN) Strength (PSI) Range Gravity

221100 UNIQUE SINGLE-USE NO MEASURING EPOXY21006 6 pk clamshell 2-part Epoxy System Clear 100,000 550 Metal to Metal 40 C to 100 C 30-60 Min.21000 400 pc. bulk in a single-use pack. to 460 Wood to Wood

No Mess - No Waste Gray 65 Nylon to Nylon991100 2-PART EPOXY

91050 50 ml dual cartridge Compare to White 125,000 0.25 1400 -65°F to +300°F 5 minutes 1.191040 400 ml dual cartridge 3M DP190®

999900 FLEXIBLE TOUGHENED 2-PART EPOXY99050 50 ml dual cartridge Compare to Amber 8,000 0.07 1500 -55°F to +200°F 240 Minutes 1.1499040 400 ml dual cartridge 3M DP420®

992200 HIGH PEEL / HIGH SHEAR 2-PART EPOXY92050 50 ml dual cartridge White 25,000 0.1 3500 -55°F to +250°F 120 Minutes 1.1492040 400 ml dual cartridge or

Black

Epoxies

Vibra-TITE Available Plexus® Product Color Viscosity (cP) Max Gap Shear Mix Ratio Temperature Fixture Specific Part # Sizes Product Description at 20 RPM (FILL, IN) Strength (PSI) by Volume Range Time Gravity

228855 330000 MMA 5 MINUTE28550 50 ml * General purpose. Off 100,000 0.1 4500 1 to 1 -40°F to +250°F 5 Minutes 1.1

cartridge White228811 331100 MMA 10 MINUTE

28150 50 ml * High strength. Off 100,000 0.1 4600 1 to 1 -40°F to +250°F 10 Minutes 1.1cartridge White

228822 332200 MMA 28237 37 ml cart. __ *__ Flexible. White 150,000 0.125 2000 10 to 1 -40°F to +180°F 12 Minutes 1.128240 370 ml cart. *

MMA’s

BONDING PRODUCTS

Vibra-TITE offers a wide range of bonding products including Epoxies, Hot-melts,Urethane, and MMA’s designed to meet a variety of assembly requirements. Ask yoursales representative for a complete list of dispensers and mix nozzles.

Vibra-TITE Available Product Color Viscosity (cP) Max Gap Strength Temperature Fixture Time Specific Part # Sizes Description at 20 RPM (FILL, IN) Range Gravity

991177 PRESSURE SENSITIVE HOT MELT91755 5 lb brick White 36,000 N/A 12.5 pli -65°F to +200°F N/A 0.91

@350°F996633 HOT MELT GASKETING COMPOUND

96355 5 lb brick White 36,000 N/A 0.5 -65°F to +210°F N/A 0.92

998899 URETHANE98902 2oz. Light 7,000 0.05 Typical Values: -40°F to +200°F 90 Minutes 1.198904 4oz. Brown Substrate failure98900 1 L bottle

Vibra-TITETM is a trademark of ND Industries, Inc.®Plexus is a registered trademark of Illlinois Tool Works Inc.


SP

EC

IALT

Y P

RO

DU

CT

S

VViibbrraa--TITE Bench Pack 5is a handy assortment of ourmost popular threadlockers,a retaining compound andDriveGrip anti cam-out fluidin a light weight clear plasticcontainer.Part #27005

Prevents StrippedScrews

Reduces WorkerFatigue

Prevents DriverSlippage

DDrriivveeGGrriipp

Vibra-TITE 121Medium, RemovableStrength ThreadlockerCOMPARE TO LOCTITE 242®

Vibra-TITE 541 High Strength RetainingCompoundCOMPARE TO LOCTITE® 680

Vibra-TITE 150 Wicking Grade, MediumStrength ThreadlockerCOMPARE TO LOCTITE 290

DriveGrip Anti cam-out fluidmakes it easy to removeor tighten screws!

Vibra-TITE 140 High StrengthThreadlockerCOMPARE TO LOCTITE 271

TM BENCHPACK 55A must for

every tool box!

Anti Cam-OutFluid

• Unlimited shelf-life• Odorless, non-toxic, non-corrosive• Works instantly, won’t irritate skin• Wipes clean, no staining• Works great in applications where fastener heads or drives are worn or damaged.• Eliminates tool wear, rounding, and deforming of fasteners.• Eliminates the need for specially designed screwdrivers.

Increases the grip-strengthbetween the fastener

head and tool by as much as

700%700%

REACT-A-PACK

A Complete 2-Part Epoxy Systemin a Single-Use Pack!

No Measuring!No Mess! No Waste!

Call: 800-521-2663 or visit: www.threadlockers.com or www.ndindustries.comVibra-TITETM, BenchPack 5TM and DriveGripTM are trademarks of ND Industries, Inc. ®Loctite and Loctite 242 are registered trademarks of the Henkel Corporation 19

React-A-Pack Epoxy is a system that delivers the advantagesof a 2-part epoxy adhesive in a single pack. Inside the packthe epoxy resin and hardener are separated by a patentedprocess. When mixed by mashing the hardener and resintogether the product becomes a five minute epoxy with theadvantage of no mess and the correct mix ratio in every pack.Part #21006 – 6 Pack ClamshellPart #21000 – 400 Pc. Bulk

Typical Applications• General purpose epoxy bonds plastic, steel, ceramic and wood.Suggested Uses• Electric: Sealing wire connectors, lawn sprinkler systems, pumps.• Auto: Trailer wire connectors.• Marine: Loose screws in fiberglass, wire connector seal & vibration proof.• Home: General adhesive needs, furniture, loose wallboard hooks & screws,

sealing, towel bars, fillet & supports, candle holder sockets.

Great for wire nuts and out-door electrical applications.

Will not run or drip onvertical applications.

Works great on householditems, furniture and cabinetry.

Part #47002.5 oz. Tube in cellobag for easy displayand handling.

Use with:• Screwdrivers of all kinds • Hex Keys • Pliers • Vise Grips • Channel Locks • Open-end & Box-end Wrenches

NEWIntroduction!

NEWIntroduction!

COMMITTED TO YOU AND YOUR CUSTOMERSVibra-TITE products can be supplied to suit your specific needs. We are dedicated to providing

innovative, affordable products and services.

ND Chemical Blending offers services for:

• Toll Blending

• Supply (In Bulk or Bottle) of:

- Anaerobic Adhesives

- Threadlockers

- Retaining Compounds

- Sealants

- Structural Adhesives

- Cyanoacrylates

- 2 part Epoxies

- Urethanes

Your Formula Supplied in Bulk or BottleND Industries manufactures annually in

excess of 1 million pounds of a wide variety

of Vibra-TITE Adhesives, Anaerobics,

Cyanoacrylates, Epoxies, Urethanes,

Ultraviolets, MMA's, Acrylics, and more

offering custom service formulation and toll

blending to meet specific customers' needs.

CREATE YOUR OWN UNIQUE BRAND IDENTITYND Industries manufactures many adhesives and sealants for private label use and can

fill, label, and package bottled products to your specifications. ND canalso supply bulk materials if your company does not require packaging services.

ND provides private labeling services including design and production with quantityrequirements substantially lower than our competitors.

CHEMICAL BLENDING, CUSTOM SERVICES,TOLL BLENDING AND PRIVATE LABELING

20

TE

CH

NO

LO

GY

AN

D S

ER

VIC

ES

ND’s specialized team of chemists are

second to none. They are hard at work

developing customized applications to

meet individual customer's needs.

ND Industries provides top quality fastening and assembly related products and services, specializing

in threadlockers, sealants, anaerobics, lubricants, adhesives and more to a wide range of industries

including automotive, electronics, aerospace, marine, construction,and appliance.

Our engineering and chemical research capabilities, along with a strong emphasis on individualized

problem solving, constantly lead us to the development of the most cutting-edge original technologies.

That means new products with improved results.

A VERTICALLY INTEGRATED SUPPLIERThis means we do it all from top to

bottom; we’re a one-stop source providing

design engineering, custom chemical

formulations and distribution.

Our in-house capabilities help us fulfill

multiple functions for our customers and,

at the same time , keep our overhead low.

This allows us to provide high quality

products and services at costs generally

lower than our competitors.

ND Industries is ISO certified.

In the high-tech world of manufacturing, tolerances are tight and specifications are rigid. Consequently,

locking, sealing, bonding, and assembly related products and processes designed to meet these

requirements are generally associated with high cost, and in many cases, slow response times. As a

vertically integrated supplier ND Industries provides cost effective, highly responsive alternatives to

products and services from companies such as Loctite®, 3M®, and others.

VERSATILE, POWERFUL, COST-CUTTING TECHNOLOGY

Call: 800-521-2663 or visit: www.threadlockers.com or www.ndindustries.comVibra-TITETM is a trademark of ND Industries, Inc. ®Loctite is a registered trademark of the Henkel Corporation, 3M is a registered trademark of Minnesota Mining and Manufacturing Co. 21

FORM RINGS®

ND Plastisol Open-Mold are partsmade of moldable PVC materialsthat can seal, trim, cushion, insulateand control noise and vibration…often at a fraction of the cost of diecutting and injection molding.

ND PLASTISOL® APPLIED-TO-METALST-3® ND PLASTISOL® OPEN MOLD ND MASTICS & EXPANDABLES

ND's service centers can Pre-Apply ND products on ND-suppliedfasteners or on fasteners that you supply. ND’s service centers aretooled with state-of-the-art fastener processing equipment toprovide quality products and rapid distribution.

ONE OF THE INDUSTRY’S BROADEST PRODUCT LINESND offers a wide range of fastening and assembly related productsand processes that exhibit one or more of the following characteristics:

Locking Re-Useability Noise & Vibration ReductionSealing Cushioning Minimize Galling/StrippingBonding Insulating MaskingLubricating Identification Temporary Retention

ND categorizes its products by their physical properties: InertCoatings, Reactive Coatings, Formed Products, and SpecialProducts. ND also offers customized formulations for your uniquefastening and assembly needs.

With its growing family of fastening and assembly products andservices, ND meets or exceeds many of the rigorous standardsestablished by the automotive, aerospace, and defense industries.

Customers Served: Accreditation:DAIMLERCHRYSLER QS 9000 RegisteredGENERAL MOTORS ISO 9002 RegisteredFORD MOTOR COMPANY ISO17025 RegisteredBOEING AS 9000 RegisteredLOCKHEED MARTIN QPL-18240 ListedJOHN DEERE QSLM RegisteredMACK TRUCK Member Industrial CUMMINS ENGINE Fasteners InstituteVOLKSWAGEN

ND Patch products make thread-ed fasteners self-locking and self-sealing, while leaving them fullyadjustable. Compare to Tuf-Lok®..

ND PATCH® & 3600 RING PATCHTM

Vibra-TITE VC-3 Original is not ananaerobic or an adhesive. It is aunique blend of acrylic resins thatmakes any threaded fastener self-locking and self-sealing, whileremaining service removable.

VIBRA-TITE® VC-3 ORIGINALTM

INERT LOCKING

ADVANCED SEALING

MASKING & LUBRICATING ASSEMBLE EZ

An automotive approved process,ND LM-1293 is a Teflon-type fas-tener coating that lubricates andprevents undesirable substancesfrom adhering to fastenerthreads. Compare to Nycote®.

ND EZ Drive 200 is an ergonomicassembly aid designed toincrease installation efficiencyby reducing friction by as muchas 75%.

ND Stay-Put provides temporary,dependable retention for fasten-ers or other components prior toand during the assemblyprocess.

Whether your need is to identifysome special characteristics or tocolor match a fastener head to amating surface, ND is yoursource for color identification.

LM-1293® ND EZ DRIVE 200™ ND COLOR CODETM

ND Anti-Seize compounds areformulated to prevent seizing,galling, pitting and excessive wearand corrosion. ND Anti-Seize willnot wash, squeeze or burn out.

ND ANTI-SEIZE 907TM

ND STRIP®, ND PELL-IT®,SOFT TOUCH TIP® PELL-IT, SURE TEMP®

ND inserts are offered in Nylon,KEL-F® or VESPEL® which NDautomatically inserts into a fasten-er, making it self-locking and self-sealing, yet fully adjustable.

ND Microspheres® is offered inacrylic and epoxy formulations,available in pre-applied or in bulk forapplication by other fastenercoater/converters. Compare to3M® Scotch-Grip®, Loctite Dri-Loc®, & omniTECHNIK PreCoat®.

ND MICROSPHERES®

Expand-A-Seal ES0105 is anoriginal 2-in-1 application andthe most effective way to simulta-neously lock and bond fastenersand seal against all air and fluidleakage.

EXPAND-A-SEAL ES0105®

REACTIVE LOCKING

EPOXY-LOCK®

ND Epoxy-Lock® is a powerfullocking/ sealing adhesive which ispre-applied to either male orfemale threaded fasteners. Thoughthe adhesive surface is dry to thetouch, the forces of engagementinitiate a chemical reaction.

ND STAY-PUT®

ST-3® is designed to be applied byND or on the customer’s automatedband coating equipment or tumblecoater. Compare to 3M® Scotch-Grip® 4291, and Loctite® Vibra-Seal® 516, 517, 503, and 503H.

ND Plastisol Applied-To-metalprovides a positive seal thateliminates leaks. It is available ina wide variety of durometers andcolors.

Crushable mastics evenly fill andseal all voids and are applied bythe assembler. Heat causes thematerial in Expandables to expandand adhere to metal, creating aseal while filling in the gaps.

Form Rings® are mashablepolyamide rings for sealingthreaded and unthreaded fasteners.Form Rings® are ideal for on-the-job applications to a wide varietyof nails, screws, bolts, and rivets.

22

ND Pre-Applied Process Compare To

ND Pre-Applied Product / IndustryCross Reference Chart

ND Microspheres® TA Series

ST-3 Masking / Lubricating

®3M & Scotch-Grip are registered trademarks of the Minnesota Mining & Manufacturing Company. ®Loctite, Dri-Loc and Vibra-Seal are registered trademarks of Henkel Corporation.®PRECOTE is a registered trademark of PRECOTE USA. ®ND and ND Industries are registered trademarks of ND Industries, Inc.

ND Microspheres® Epoxy Type

Epoxy-Lock®

ND Microspheres® Acrylic Series

Call: 248-288-0000 or visit: www.ndindustries.com

23

ND Epoxy-Lock ............................. COMPARE TO ................ 3M Scotch-Grip, Loctite Dri-Loc, PPRREECCOOTTEE 8800

ND Microspheres 593-S ................ COMPARE TO ................ 3M®Scotch-Grip®2353 & 4844

ND Microspheres 1193-S .............. COMPARE TO ................ 3M Scotch-Grip 2451& 2510

ND Microspheres TA300 ................ COMPARE TO ................ PRECOTE® 30



ND Microspheres AA0695.............. COMPARE TO ................ Loctite® Dri-Loc® 200

ND Microspheres AA0696.............. COMPARE TO ................ Loctite Dri-Loc 200









ND Microspheres AA1195.............. COMPARE TO ................ Loctite Dri-Loc STS

ND Microspheres AA1196.............. COMPARE TO ................ Loctite Dri-Loc STS





ND ST-3-W ..................................... COMPARE TO ................ 3M Scotch-Grip 4291

ND ST-3-L3 .................................... COMPARE TO ................ 3M Scotch-Grip 4291

ND ST-3-L4 ................................... COMPARE TO ................ Omni TECHNIK PRECOTE® 5

ND ST-3-L5 .................................... COMPARE TO ................ Loctite Vibra Seal® 503

ND ST-3-L5A .................................. COMPARE TO ................ Loctite Vibra Seal 503HV

ND ST-3-L6 .................................... COMPARE TO ................ Loctite Vibra Seal 516

ND ST-3-L7 .................................... COMPARE TO ................ Loctite Vibra Seal 517

ND ST-3-L8 .................................... COMPARE TO ................ Loctite Vibra Seal 503mod

ND ST-3-L8A .................................. COMPARE TO ................ Loctite Vibra Seal 503HVmod

ND ST-3-L10 .................................. COMPARE TO ................ Loctite Vibra Seal 517mod

ND ST-3-L11 .................................. COMPARE TO ................ Loctite Dri-Seal 506

ND ST-3-L13 .................................. COMPARE TO ................ Loctite Dri-Seal 513

A Trademark of ND Industries

Corporate Offices

1000 North Crooks Road · Clawson, Michigan 48017 USA · Phone: 248-288-0000 · Fax: 248-288-0022Visit our web site at www.ndindustries.com · e-mail: [email protected]

ND Western Fastener Processing DivisionSanta Fe Springs, California

ND Southwestern Fastener Processing DivisionArlington, Texas

ND MidwesternFastener Processing Division/ChicagoNorthbrook, Illinois Rockford, Illinois

ND Midwestern Fastener Processing Division/DetroitClawson, Michigan

ND MidwesternFastener Processing Division/ClevelandTwinsburg, Ohio

ND Southeastern Fastener Processing DivisionCharlotte, North Carolina

ND EasternFastener Processing DivisionOakland, New Jersey

ND Industries Asia, Inc./TaiwanFastener Processing DivisionKaoshiung, Taiwan R.O.C.

ND Electronics (Kunshan) Co., Ltd.Fastener Processing DivisionKunshan City, China

ND Vibra-TITE DivisionsOrders in USA: ND Division #19 – Sanford, FloridaPH: 1-800-521-2663 • FX: 407-322-5679

Orders outside USA: ND Division #10 – Troy, Michigan PH: 248-655-2580 • FX: 248-655-2582

Orders in Mainland China: ND Adhesive Technology (Shanghai) Co., Ltd – Jiading District, Shanghai PH: 86-021-59959049 • FX: 86-021-59959045

Documents

• THREADLOCKERS • THREAD SEALANTS • … (Vibra-TITE) Interchange...• THREADLOCKERS • THREAD SEALANTS • RETAINING COMPOUNDS • LIQUID GASKETING • CYANOACRYLATES • ANTI-SEIZE