Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Re
v: 10
.20
17
800-523-6049 | www.blondertongue.com
©2017 Blonder Tongue Laboratories, Inc. All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.
DOCSIS Products
Test & MeasurementEquipment
The BT-CMTS-3000 (Cable Modem Termination System) is targeted for small to medium size deployments to provide two-way data services on a coaxial network. The system is designed to support DOCSIS/EuroDOCIS cable modems in amounts up to 200 for version 3.0 or 500 for version 2.0.
Ordering InformationModel Stock # Description BT-CMTS-3000 2347 DOCSIS/EuroDOCSIS 3.0 CMTS (Cable Modem Termination System)
Internet
Model: BT-CMTS-3000
DOCSIS Products
4x Upstream QPSK/QAM Channels
Redundant Power Supplies
16x DownstreamQAM Channels
GigE/SFP
Features• DOCSIS/EuroDOCSIS 3.0 / 2.0 compatible
• High Bandwidth
• 16 Downstream Channels supporting up to QAM 256
• 4 Upstream Channels supporting up to QAM 64
• 500 Cable Modem access capacity (DOCSIS 2.0)
• 200 Cable Modem access capacity (DOCSIS 3.0)
• 1RU 19 inch chassis with dual redundant universal power supplies - hot-swappable
• End-to-end Quality of Service (QoS)
• Support Real-time CPE Info
• Load Balancing Function
• Dynamic balancing, restricted load balancing group
• Support load balancing strategy
• Subnet VLAN & L2VPN
• System Log
• Spectrum Monitoring
• Automatic Frequency Hopping
• Internal DHCP server
• Dual-Stacked IPv4/IPv6 capability
Cable ModemTermination System
2 800-523-6049 | www.blondertongue.com
HOSPITALITY, MDUs, andCAMPUSES
GeneralElectrical Power:
Power Dissipation:90V-264VAC, 50/60 Hz (dual redundancy power supplies)50W
MechanicalOperating Temperature:
Operating Humidity:Dimensions (W x D x H):
Weight:
32 to 104 °F (0 to 40 °C)10% to 90% (Non-condensing)19”x 11.8” x 1.75” (480mm x 300mm x 44mm)12 lbs (5.5kg)
Alarms/Monitoring/ControlLocal Monitoring: 1x Power A (Power Supply A)
1x Power B (Power Supply B)1x GIGE1x SFP1x LOG1x PWR1x RUN1x ALM
Remote Monitoring/Control: GUI-based menu via Web Browser (1x RJ45 connector; 10/100Base-T)
Console: 1x RJ45 Front-Panel Connector
Connectors GigE:
Standard:
1x RJ451x SFP (For Optical Plug-In)Ethernet 1000Base-T
RF Upstream Connectors:# of Channels:
Frequency Range:Modulation Mode:
Bandwidth:Receive Level:
Qty of Service Flow:
4x “F” Conn.45-65 MHzQPSK/QAM 16, QAM 32, QAM 641.6, 3.2 or 6.4 MHz-7 to +23 dBmV (53 to 83 dBuV) @ 6.4 MHz-10 to +20 dBmV (50 to 80 dBuV) @ 3.2 MHz-13 to +17 dBmV (47 to 77 dBuV) @ 1.6 MHz1024
RF Downstream Connectors:# of Channels:
Frequency Range:Modulation Mode:
Bandwidth:RF Level:
Qty of Service Flow:Channel Selection:
1x “F” conn.1652-1002 MHzQAM 64, QAM 2566.0/8.0 MHz+44 dBmV (104 dBuV)204816 Channels within 192 MHz
Input/Output InterfacesDHCP DHCP relay/snooping
DHCP bundleDHCP lease query
DHCPv6: DHCPv6 relay/snoopingDHCPv6 bundleDHCPv6 lease queryDHCPv6-PDSupports Vendor Class string to identify equipment typeSupports Insert Remote-ID, Interface-ID, CMTS capabilities and CM MAC
IPv6: IPv4 and IPv6 dual-stack
VLAN & L2VPN: 802.1ad/802.1q/subnet VLANService flow-based VLAN addition or deletionVLAN addition according to option60L2VPN supportVLAN conversion
QoS: Static service flow/dynamic service flow/service classDOCSIS 3.0 USCB schedulingPowerBoost
MAC Domain Management:
MDD & MDF enable and disableMTC & MRC enable and disableUDC enable and disablePiggyback, shared-secret, channel bonding
Multicast: Multicast authenticationStatic MulticastIGMP V2/V3 Snooping
Load balance: RLBG/GLBG
Spectrum Monitor: Reverse spectrum monitoring (0~81 MHz)
Automatic Opening: Automatic Opening and upgrade based on DHCP and TFTPPN8600 series OLT unified opening and upgrade support
System Functions
Model: BT-CMTS-3000 Applications and SpecificationsD
OCSIS
3800-523-6049 | www.blondertongue.com
4 800-523-6049 | www.blondertongue.com
Model: BT-CMTS-EDGE Outdoor Cable ModemTermination System
DOCSIS Products
The BT-CMTS-EDGE is a remote MAC/PHY, self-contained CMTS that utilizes a single device to deliver video and data services to existing coax infrastructures. This edge device allows the operator to go fiber deep and move closer to the subscriber. The BT-CMTS-EDGE can deliver up to 16 downstream channels, and 4 upstream channels to hundreds of subscribers in DOCSIS 3.0 or even more in DOCSIS 2.0.
The BT-CMTS-EDGE features superior RF performance, and can be pedestal, wall, or strand-mounted for outdoor installations.
Ordering InformationModel Stock # Description BT-CMTS-EDGE 2345 F6090 DOCSIS 3.0 Outdoor CMTS; 60/90 VAC CATV Network Power 2345 F120 DOCSIS 3.0 Outdoor CMTS; 110/220 VAC Utility Power
Features & Benefits• DOCSIS Module supports GE/EPON uplink (SFP module required), and DOCSIS/EQAM functions• Fiber Optic Receiver module with AGC for Broadband CATV Input (54-1002 MHz)• Provides either a Cable-based Power Supply (AC 60V/90V), or a Local Power Supply (AC 110V/220V)• Provides Two High Level RF Outputs at 48 dBmV• Supports passive optical networking (PON) to preserve fiber resources• Accommodates upgrade to 10 Gigabit PON• Provides high-bandwidth support of 960 Mbps per fiber node• Provides ability to create a separate service flow and classifier for each cable modem automatically• Supports PacketCable/PCMM and multi-service applications, including internet, video, and interactive VOD• Supports strand-mounted and wall-mounted installations• Provides overall management and maintenance modes
Pre-Production SpecificationsSubject to Change
Stock# Model Description
1002622 SFP-SMF-1310-10KM 1000BASE-LX SFP, 1310NM, 10KM, SMF, DDM1002623 SFP-SMF-1550-80KM 1000BASE-ZX SFP, 1550NM, 80KM, SMF, DDM1002624 SFP-SMF-CWDM-1470NM-80KM 1.25GBASE-CWDM-SFP, 1470NM, 80KM, SMF, DDM1002625 SFP-SMF-CWDM-1490NM-80KM 1.25GBASE-CWDM-SFP, 1490NM, 80KM, SMF, DDM1002626 SFP-SMF-CWDM-1510NM-80KM 1.25GBASE-CWDM-SFP, 1510NM, 80KM, SMF, DDM1002627 SFP-SMF-CWDM-1530NM-80KM 1.25GBASE-CWDM-SFP, 1530NM, 80KM, SMF, DDMLast 2 numbers indicate channel number (22-27).
Stock# Model Description
1002628 SFP-SMF-CWDM-1550NM-80KM 1.25GBASE-CWDM-SFP, 1550NM, 80KM, SMF, DDM1002629 SFP-SMF-CWDM-1570NM-80KM 1.25GBASE-CWDM-SFP, 1570NM, 80KM, SMF, DDM1002630 SFP-SMF-CWDM-1590NM-80KM 1.25GBASE-CWDM-SFP, 1590NM, 80KM, SMF, DDM1002631 SFP-SMF-CWDM-1610NM-80KM 1.25GBASE-CWDM-SFP, 1610NM, 80KM, SMF, DDM1002632-XX SFP-SMF-DWDM-CHXX-40KM 1.25GBASE-DWDM-SFP, CH. 20-59 ,40KM, SMF, DDM1002633-XX SFP-SMF-DWDM-CHXX-80KM 1.25GBASE-DWDM-SFP, CH. 20-59, 80KM, SMF, DDMLast 2 numbers indicate channel number (22-59).
5800-523-6049 | www.blondertongue.com
Model: BT-CMTS-EDGE SpecificationsD
OCSIS
GeneralCable-based Power Supply:
Local Power Supply:Power Dissipation:
AC60V/AC90V, 36-110V, 50/60 HzAC110V/AC220V, 90-265V, 50/60 Hz60W
Operating Temperature:Operating Humidity:
Dimensions (W x D x H):Weight:
32 to 131 °F (startup on -25 °C)5% to 95% (Non-condensing)10.4”x 7.7” x 5.1” (265mm×195mm×129mm)11 lbs (5 kg)
Standard: DOCSIS 3.0DOCSIS 2.0C-DOCSIS
SNI:
UNI:
1 SFP (GE/EPON ONU)1 GE RJ451 GE RJ45
Management Interface: 1 GE RJ45 management interface1 RJ45 console interface
RF Upstream# of Channels:
Frequency Range:Modulation Mode:
Bandwidth:Receive Level:
Qty of Service Flow:
45-42 MHz (Operational with diplexers)QPSK/QAM 16, QAM 32, QAM 641.6, 3.2 or 6.4 MHz-7 to +23 dBmV @ 6.4 MHz-10 to +20 dBmV @ 3.2 MHz-13 to +17 dBmV @ 1.6 MHz1024
RF Downstream# of Channels:
Frequency Range:Modulation Mode:
Bandwidth:RF Level:
Qty of Service Flow:Channel Selection:
1654-1002 MHzQAM 64, QAM 2566.0 MHz+44 dBmV2048Optional Channels within 192 MHz
DHCP DHCP relay/snoopingDHCP bundleDHCP lease query
DHCPv6: DHCPv6 relay/snoopingDHCPv6 bundleDHCPv6 lease queryDHCPv6-PDSupports Vendor Class string to identify equipment typeSupports Insert Remote-ID, Interface-ID, CMTS capabilities and CM MAC
IPv6: IPv4 and IPv6 dual-stack
VLAN & L2VPN: 802.1ad/802.1q/subnet VLANService flow-based VLAN addition or deletionVLAN addition according to option60L2VPN supportVLAN conversion
QoS: Static service flow/dynamic service flow/service classDOCSIS 3.0 USCB schedulingPowerBoost
MAC Domain Management:
MDD & MDF enable and disableMTC & MRC enable and disableUDC enable and disablePiggyback, shared-secret, channel bonding
Multicast: Multicast authenticationStatic MulticastIGMP V2/V3 Snooping
Load balance: RLBG/GLBG
Spectrum Monitor: Reverse spectrum monitoring (0~81 MHz)
Automatic Opening: Automatic Opening and upgrade based on DHCP and TFTPPN8600 series OLT unified opening and upgrade support
System FunctionsDOCSIS Module
Related ProductsModel Description
BT-CMTS-3000 DOCSIS/EuroDOCSIS 3.0 CMTSDMM-5500 DOCSIS Modem ModuleBTPRO-7000 CM8FO HD Tablet w/ Modem & Fiber Options
Passband:Amplifier Type:
Return loss:
RF Test Points (± 1 dB):Port to Port Isolation:
Maximum Output Level:Reference Output Level
1002 MHz:550 MHz:54 MHz:
Default Output Tilt (54-1002 MHz):Operational Gain:
Flatness:Level Stability (-40-+55˚C):
MER (no CATV signals)Equalizer Off:Equalizer On:
CSO:CTB:C/N:
Forward54-1002 MHz PHD≥16 dB (87-550 MHz)≥14 dB (550-1002 MHz)-20 dB20 dB+48.0 dBmV
+48.0 dBmV+45.3 dBmV+40.0 dBmV8 dB16 dB±0.75 dB±1.5 dB
≥35 dB≥43 dB>60 dBc>65 dBc>65 dBc
Reverse5-42 MHz
≥16 dB
-20 dB20 dB
13 dB±0.75 dB±1.5 dB
Based on analog channel loading from 54-550 MHz and Digital channel loading from 550-1002 MHz (at -10 dB) with a fiber optic input of 0 dBm.
RF Section Frequency Range:Channel Width:
Symbol Rate:Modulation Mode:
87-1002 MHz8 MHz/6 MHz6.875/6.900/6.952Mband/s; 5.057/5.361Mband/s64/256 QAM
Phase Noise 1 kHz:10 kHz:
>100 kHz:
< -75 dBc/Hz< -85 dBc/Hz< -100 dBc/Hz
Delay Jitter Tolerance:PCR Jitter Tolerance:
Transmission:Multiplexing Capability:
1000 ms≤500 nsUDP/IP/GEPMT PID, and other PSI/SI multiplexing capabilities
TS Multiplexing:1:
2:3:4:
VOD service, single frequency supports 32 programs, with each program supporting 16 PIDs simultaneously (default)a single program can configure to transmit 50 PIDs256 UDP ports, and 4,096 PIDs (entire unit)Supports DATA stream of a single frequency multiplexing with other frequency
Stream parameters1:2:3:4:
5:6:
MPEG-2, MPEG-4, H.264, AVS, DATA (including VBR & CBR)Simultaneous Unicast, Multicast, & DATA Streams (1xFreq.)Each frequency support 4 business UDP portUDP port can be configured with PMT PID and service flow type information according to different frequenciesStream overflow protectionIn-data broadcasting services, PID value offset in the transport stream (remapping)
EQAM Functions
Forward Optical Receiver Module (only)
Wavelength:Optical Connector:
Optical Input Range (for AGC):Passband:
Optical Input Test Point (±20%):
1290~1600nmSC/APC-7~+2dBm±0.75dB1V/mW
Fiber Receiver Module
Model: DMM-5500 DOCSIS Modem Module
DOCSIS Products
The DMM-5500 (DOCSIS Modem Module) is a DOCSIS 3.0/2.0 compliant cable modem expansion module designed for compatibility and support with the LG 5500 set-top box serving Commercial TV and Lodging deployments.
This integrated solution provides an expanded feature set to not only minimize interconnect cabling and power requirements for cleaner and more reliable installations, but also is a cost-effective way to deliver IP OTT communications, interactive guest services, and DOCSIS based high speed internet access (HSIA) over HFC and coaxial RF systems.
Ordering InformationModel Stock # Description DMM-5500 2326A DOCSIS Modem Module
Features• DOCSIS 3.0 Compliant Modem Card• Designed to mate with the LG 5500 Set Top Box• Built-in CATV Signal Splitter• Cost-effective solution for Lodging applications such as:
• Hotel Guest Rooms• Cruise Ship Cabins• Assisted Living and Healthcare Facilities
RF Out RF InCable Input
LG Model: 5500 DMM-5500
6 800-523-6049 | www.blondertongue.com
Model: DMM-5500 Application and Specifications
Related ProductsModel DescriptionBT-CMTS-3000 Cable Modem Termination SystemBTPRO-7000 CM8FO HD Tablet with Cable Modem and Fiber Optic Options
RF UpstreamRF Downstream
General
Alarms/Monitoring/Control
Standards/Connectivity/Interfaces
DO
CSIS
IPTV DELIVERY
BT-CMTS-3000 andDMM-5500
Frequency Range: 5 ~ 85MHz (DOCSIS 3.0)
ModulationTDMA:
S-CDMA:QPSK, QAM 8, QAM 16, QAM 32, and QAM 64 QPSK, QAM 8, QAM 16, QAM 32, QAM 64, and QAM 128
Max. Data RateQPSK:
QAM 16:320, 640, 1280, 2560, 5120kbps640, 1280, 2560, 5120, 10240kbps
BandwidthTDMA:
S-CDMA:200, 400, 800, 1600, 3200 and 6400 kHz1600, 3200 and 6400 kHz
Signal LevelTDMA:
S-CDMA:-------------------------------------
+8 to +54 dBmV (QAM 32, QAM 64)+8 to +55 dBmV (QAM 8, QAM 16)+8 to +58 dBmV (QPSK)+8 to +53 dBmV (all modulations)-------------------------------------------------------------------Output level of CM can automatically be controlled by CMTS through power ranging function (1dB steps)
Output Return Loss: > 7dB DOCSIS (5 ~ 85MHz)
Frequency Range: 108~1002MHz (DOCSIS)
Demodulation: QAM 64/ QAM 256
Max. Data Rate: Up to 320 Mbps with 8DS channel bonding (DOCSIS)
Bandwidth: 6MHz (DOCSIS)
Signal Level: -15~ 15dBmV (DOCSIS)
Input Return Loss: > 7dB DOCSIS (108 ~ 1002MHz)
Power:Power Dissipation:
from LG5500 internal connector8.5 W (Typical operation), 9.25 W (Maximum)
MechanicalOperating Temperature:
Operating Humidity:Storage Temperature:
Dimensions (W x H x D):Weight:
32 to 104 °F (0 to 40 °C)10% to 90% (Non-condensing)14 to 122 °F (-10 to 50 °C)4.44 x 1.13 x 7.25 in (112.71 x 28.58 x 184.15 mm)8 oz (227 g)
Diagnostic LEDs: DS, DS1, US, US1, STATUS, LINK
Management: CMTS Control
Surge Protection: On RF Input shall sustain at least 1kV
Protocol Support: DOCSIS 3.0/2.0
Interfaces: WAN Interface “F” type female 75 Ω: 2, port
CPEsMaximum number of CPEs:
Filtering:64 (64 MAC addresses)LLC: 16 IP: 32
Number of SIDs: 16
Frequency SearchingFrequency Cache:
Channel Plan:5 entries1MHz (DOCSIS)
7800-523-6049 | www.blondertongue.com
Model: BT-QAM-PRO QAM/8VSB/Analog TV Analyzer
Test & Measurement Equipment
Features
The BT-QAM-PRO is an economical feature packed test instrument for analyzing CATV QAM and Broadcast 8VSB digital channels, as well as NTSC analog channels. This compact instrument is designed with field service technicians in mind, and provides many of the features that are typically only found in much higher priced units. The BT-QAM-PRO comes complete with a soft water resistant case and a micro USB charging/PC cable.
Ordering InformationModel Stock # Description BT-QAM-PRO 4229 QAM/8VSB/Analog TV Analyzer
• 75 ohm (interchangeable “F” connector)• Power range: -50 dBmV to 40 dBmV• Spectrum Display with variable span, automatic
reference level, peak and hold modes• Quality FAIL - MARGINAL - PASS: Measuring the
quality and the power up to 140 CHs in blocks of 8 Digital or Analog channels simultaneously
• Barscan: TV analog and digital bars scan from 10 to 100 channels
• Fully Automatic Operation
• MER, aBER, bBer, Noise Margin & Level Measurements
• Spectrum Display• Constellation Display• Barscan Display• Data Logger• Custom Memory Plans• Leakage/Ingress Measurements
Measurement & Spectrum Analysis• Frequency Range: 5 MHz to 1,000 MHz
(Channels T7 to 158)
8 800-523-6049 | www.blondertongue.com
Model: BT-QAM-PRO Display Screens and SpecificationsTEST
Measurements & Spectrum AnalysisFrequency Range: 5 MHz to 1,000 MHz
Input Impedance: 75 Ω (interchangeable “F” connector)
Power range MEAS.: -50 dBmV to 40 dBmV (10 to 100 dBμV);60 dBmv (120 dBμV) with ext. attenuator
Dimensions (W x D x H): 6.3” x 1.4” x 3.75” (160mm x 34mm x 95mm) - Meter Only
Weight: 1.1 lbs. (500 g)
USB Micro: For battery charge and PC interface for SW up-grade and memory plan management.
Battery: Rechargeable Li-Po battery pack, 3 hour duration
Supplies: Padded transport bag and Micro/USB cable
General
Related ProductsModel Description
BTPRO-7000S HD Tablet/Touch Signal Analyzer; HD/SD QPSK/8PSK satellite, 8VSB, QAM, AnalogBTPRO-1000 QAM/8VSB/Analog Signal AnalyzerMTSA-PRO MPEG Transport Stream Analyzer
9800-523-6049 | www.blondertongue.com
Model: BTPRO-1000 QAM/8VSB/Analog Signal Analyzer
Test & Measurement Equipment
The BTPRO-1000 is a versatile CATV test instrument for measuring both digital and analog CATV and Broadcast TV signals. Robust and easy to use, BTPRO-1000 provides hours of operating time from its high capacity battery. The instrument comes complete with a soft carrying case, AC main and automotive chargers.
An optional Pro:Idiom™ Key Recovery feature is available for Hospitality applications that employ Pro:Idiom™ television sets. The option consists of a built-in frequency agile QAM modulator that connects directly to an affected Pro:Idiom™ TV to provide new encryption key information.
Another powerful feature the RK option provides is the ability to test TV codec capabilities on both Pro:Idiom and standard TV sets. This useful tool allows service providers to easily determine the TV video and audio decoding capability.
Features• QAM/8VSB/NTSC Measurements• Extended frequency range of 4-1000 MHz• MER, aBER, bBER, Noise Margin and Level/Power
measurements plus Spectrum Analysis• Automatic quality analysis: FAIL-MARGINAL-PASS• Auto Seek & Store Function; an essential feature
for creating custom memory channel plans. Scans receivable signals, determines signal type (QAM,8VSB or analog) and stores only those channels having signal levels above user defined values
• Ingress and Leakage Modes• Data Logger Function: Steps through each
channel in the “Active” memory plan and stores all related measurements
Ordering InformationModel Stock # Description BTPRO-1000 4230 QAM/8VSB/Analog Signal Analyzer 4230 RK Signal Analyzer with Pro:Idiom™ Key Recovery Option
• Graphics Display• Alpha-numeric keypad
Optional TV Key Recovery for Hospitality Pro:Idiom™ Systems (RK Option)• PI Restore and PI Key Test (PI encrypted color
bar test pattern) functions• Clear QAM test signals used for TV compatibility
testing in the following formats:• MPEG-2 video with AC3 Audio• MPEG-2 video with MPEG-2 Layer 1 Audio• MPEG-4/H.264 with AC3 Audio• MPEG-4/H.264 with EAC3 Audio
10 800-523-6049 | www.blondertongue.com
Model: BTPRO-1000 Application and Specifications
Related ProductsModel Description
BT-QAM-PRO QAM/8VSB/Analog TV AnalyzerBTPRO-7000S HD Tablet/Touch Signal Analyzer; HD/SD QPSK/8PSK satellite, 8VSB, QAM, AnalogMTSA-PRO MPEG Transport Stream Analyzer
Level Measurement & Spectrum Analysis Frequency Range: Frequency Resolution:
RF Input Impedance:Dynamic Range:
Measurement Resolution:Level Measurement Accuracy:
A/V Ratio:C/N Ratio:
Resolution Filter Bandwidth:Custom Channel Plans:
TV, CATV & Radio 4-1000 MHz25 kHz75 Ω (interchangeable “F” connector)-59 to +65 dBmV0.1 dB1 dB typ. (2 dB max)up to 22 dB, +/-1.5 dB (2 dB max)up to 45 dB +/-1.5 dB Max; 45-50 dB +/- 2 dB100 kHz @ -3 dB25 (199 ch. per plan)
GeneralPower Supply: Built in NiMh rechargeable battery,
external power supply
Battery Duration at 25°: 4 hours
Size: 8.5” x 5.0” x 2.4” (215 x 125 x 60 mm)
PC Interface: USB
Front Panel: Alpha numeric keypad
Power Save: TFT backlight timer, brightness adj
Power & Digital Measurements Frequency Band:
Power Measurement:BER Measurement:
MER Measurement:Constellation Display:
4-1000 MHz-45 to 65 dBmV(pre) bBER up to 1 x 10-9(post) aBER up to 1 x 10-9up to 40 dB (1dB typ., 2dB max)16-32-64-128-256 QAM
Ingress & Spectrum MeasurementsFrequency:
Level:Accuracy:
BW:
5 - 65 MHz-55 dBmV to 65 dBmV+/- 2 dB100 kHz @ -3dB
Leakage MeasurementsFrequency Range:
Resolution:Antenna Type:
115 -140 MHz25 kHzselectable
Pro:Idiom™ Key Recovery OptionRF Output
Connector: 1x “F” Female
Modulation: QAM 64 or 256 (user selectable)
Standard: ITU-T J.83 Annex B
Channel Range: CATV 2 to 158, Broadcast 2 to 69
Output Level: 20 dBmV
Pro:Idiom™ Key Recovery (RK Option)
Digital TV(Unknown Codecs)
BTPRO-‐1000 4-‐1000 MHz (-‐45 to +65 dBmV) CATV / Broadcast Channel Plans
QAM/8VSB/Analog
Pro:Idiom™ Key Recovery RK OpAon
CATV Channels 2 to 158 Broadcast Channels 2 to 69
QAM 64B or 256B
Pro:Idiom TV
USB PC with BTPRO “SMART”
connecAon sohware for Data logger downloads
BTPRO-‐1000 4-‐1000 MHz (-‐45 to +65 dBmV) CATV / Broadcast Channel Plans
QAM/8VSB/Analog
Pro:Idiom™ Key Recovery RK OpAon
CATV Channels 2 to 158 Broadcast Channels 2 to 69
QAM 64B or 256B
Pro:Idiom TV
USB PC with BTPRO “SMART”
connecAon sohware for Data logger downloads
Pro:Idiom TV
TEST
CATV Channels 2 to 158Broadcast Channels 2 to 69QAM 64B or 256B
Codec Test Signals:MPEG-2 Video with AC3 AudioMPEG-2 Video with MPEG-2-Layer1 AudioMPEG-4/H.264 with AC3 AudioMPEG-4/H.264 with EAC3 Audio
Pro:Idiom™ Options:Restore (Re-Key)Key Test (PI-encrypted color bars)
11800-523-6049 | www.blondertongue.com
Model: BTPRO-7000 (CM) HD Tablet/Touch Signal AnalyzerCable Modem & Fiber Opts.
Test & Measurement Equipment
Ordering InformationModel Stock # Description BTPRO-7000 4231 HD Tablet/Touch Signal Analyzer 4231 CM8FO HD Tablet/Touch Signal Analyzer with Cable Modem and Fiber Optic options
The BTPRO-7000 is a professional HD Tablet/Touch Analyzer with a frequency range of 5 to 1250 MHz. The analyzer features a 7 inch diagonal color screen, is compact in size and lightweight. It is ideal for analyzing and logging 8VSB, QAM and analog television or radio signals in the lab or out in the field.
The BTPRO-7000 CM8FO adds a fiber optic receiver as well as an 8x4 DOCSIS 3.0 cable modem to the instrument. Displayed information includes frequency power, modulation type and quality parameters of eight (8) downstream and four (4) upstream channels. The Optic mode can provide a ping report, as well as IP information received from the CMTS.
The fiber option also can display direct optical power measurements up to +7 dBm. The optical receiver offers a broadband RF output, that when looped back into the BTPRO-7000 RF input, shows the standard RF measurements and optic modulation index (OMI).
Features
CATV Measurements:• DOCSIS downstream, INGRESS mode, LEAKAGE
mode, BAR SCAN and TILT• TV and CATV tuner, extended band, 5-1250 MHz• Auto discovery system automatically detects and
selects analog and digital 8VSB/QAM TV signals in both Measurement and Spectrum modes
• Spectrum in real time, fast and super-fast with memory peak
• Detects, measures and displays video of MPEG 2/4 and H.264 HD programs
• All measurements, program lists, A/V PIDs, NET ID, virtual channel number, settings and pictures are on one screen
• Automatic quality analysis: FAIL-MARG-PASS• Auto memory, Manual memory and Datalogger
functions• Help function automatically identifies all the
signals with digital modulation• Bar scan TV and CATV function from 10 to 100
channels on one screen• Audio decoding of AAC and AC3• Battery test function, to regenerate and measure
the batteries and calibrate the battery indicator• Optional DOCSIS 3.0 8DS x 4US modem• Fiber Optic option provides optical power, OMI
and detected RF measurements.
Measurements: • MER, aBER, bBER, EVM, noise margin, level/power, real time spectrum analyzer and constellation display
12 800-523-6049 | www.blondertongue.com
Model: BTPRO-7000 (CM) Display Screens and Specifications
Related ProductsModel Description
BTPRO-7000S HD Tablet/Touch Signal Analyzer; HD/SD QPSK/8PSK satellite, 8VSB, QAM, AnalogBTPRO-1000 QAM/8VSB/Analog Signal AnalyzerMTSA-PRO MPEG Transport Stream Analyzer
Constellation: Full
Fiber Power Measurement (*)DOCSIS Display (*)
(*CM8FO Option) (*CM8FO Option)
Dimensions (W x D x H): 9.5” x 1.6” x 5.5” (240mm x 40mm x 140mm)
Weight: 3.5 lbs. (1.6 kg)
Display: 7” TFT touch display, 16:9, high resolution
Battery: LI-ION-POLIMER 4A battery with 4 hour battery capacity
Supplies: Padded transport bag, AC and vehicle battery chargers
General
Full Video Display
Standard Measurement Display Spectrum Display
TEST
13800-523-6049 | www.blondertongue.com
Model: BTPRO-7000S HD Tablet/Touch Signal AnalyzerCATV and Satellite
Test & Measurement Equipment
Ordering InformationModel Stock # Description BTPRO-7000S 4231 S HD Tablet/Touch Signal Analyzer
The BTPRO-7000S is a professional HD Tablet/Touch Analyzer with a frequency range of 4 to 2250 MHz. The analyzer features a 7 inch diagonal color screen, is compact in size and lightweight.
BTPRO-7000S is ideal for analyzing and logging HD/SD QPSK/8PSK satellite, 8VSB, QAM and Analog television or radio signals in the lab or out in the field.
Features
CATV Measurements:• INGRESS mode, LEAKAGE mode, BAR SCAN and
TILT
• TV and CATV tuner, extended band, 4-1000 MHz• Satellite tuner, extended band, 930-2250 MHz• Auto discovery system automatically detects and
selects analog and digital 8VSB/QAM TV signals in both Measurement and Spectrum modes
• Spectrum in real time, fast and super-fast with memory peak
• Detects, measures and displays video of MPEG 2/4 and H.264 HD programs
• All measurements, program lists, A/V PIDs, NET ID, virtual channel number, settings and pictures on one screen
• Automatic quality analysis: FAIL-MARG-PASS• Auto memory, Manual memory and Datalogger
functions• Help function automatically identifies all the
signals with digital modulation SAT, TV and CATV• Bar scan TV and CATV function from 10 to 100
channels on one screen• Audio decoding of AAC and AC3• Battery test function, to regenerate and measure
the batteries and calibrate the battery indicator• Pre-memorized SAT transponder navigation• Assisted satellite dish pointing• DiSEqC commands
Measurements: • MER, PER, LDPC, BCH, aBER, bBER, EVM, noise margin, level/power, real time spectrum analyzer and
constellation display
14 800-523-6049 | www.blondertongue.com
Model: BTPRO-7000S Display Screens and SpecificationsTESTRelated Products
Model Description
BT-QAM-PRO QAM/8VSB/Analog TV Analyzer BTPRO-1000 QAM/8VSB/Analog Signal AnalyzerMTSA-PRO MPEG Transport Stream Analyzer
Specifications
Constellation: Full
Constellation: Zoom
Dimensions (W x D x H): 9.5” x 1.6” x 5.5” (240mm x 40mm x 140mm)
Weight: 3.5 lbs. (1.6 kg)
Display: 7” TFT touch display, 16:9, high resolution
Battery: LI-ION-POLIMER 4A battery with 4 hour battery capacity
Supplies: Padded transport bag, AC and vehicle battery chargers
General
Full Video Display
Standard Measurement Display Spectrum Display
15800-523-6049 | www.blondertongue.com
Features
Ordering InformationModel Stock # DescriptionMTSA-PRO 3726 MPEG Transport Stream Analyzer; ASI/RF/IP to USB
The MTSA-PRO is a versatile compact portable device used to capture, analyze and/or generate MPEG ASI transport streams.
The MTSA-PRO features a DVB-ASI input/output, an RF input and a USB interface to connect to a PC. Powerful, feature rich PC software is included to provide professionals the must-have tools necessary for analyzing MPEG equipment and related networks.
Recent software release, includes support of HEVC (H.265), in addition to existing MPEG-2 and H.264 support.
Model: MTSA-PRO MPEG Transport Stream Analyzer
Test & Measurement Equipment
• Real time analysis via RF/ASI/IP input & TS file• Single DVB-ASI input and single DVB-ASI output
adapter for USB (half duplex)• MPEG TS analysis and capture with HEVC
support• USB 2.0, bus powered, no power supply
required• ATSC, DVB-C, DVB-T and OpenCable DTV
standards compliant• ETSI TR 101 290 Priority with real-time 4 stage
error monitoring reporting and error logging.• Diagnostic and verification of MPEG designs• PCR & PTS analysis, arrive time graphing,
measurement display and jitter analysis• HEVC Codec support (selectable decoding
options based on operating system)
• Subtitle support• Closed Caption Decoding (CEA 608/ CEA 708)• Triggered recording• Data rate analysis• Table and packet views• SI/PSI & PSIP view and interval analysis• CAS view: ECM and EMM repetition rate and
update time• PES header analysis• Real-time A/V decoding• Modulation Error Rate (MER)• Received Signal Strength Indicator (RSSI)• SCTE-35 marker detection• File loopback feature for continuous replays• RF input scan feature identifies active channels
QAM/8VSB RF
USB
ASI
ASI
16 800-523-6049 | www.blondertongue.com
Look at the data within the RF, and see what issues are present.
Model: MTSA-PRO Application and Specifications
ASI/SMPTE-310MConnectors:
Standard:Bit Rate:
Mode:
1x BNC; 75ΩDVB-ASI SMPTE-310M0~108Mbps (in 1bps step)188/192/204/208 bytes packet mode
ASI/SMPTE-310MConnectors:
Standard:Bit Rate:
Mode:
1x BNC; 75ΩDVB-ASI0~108Mbps (in 1bps step)188/192/204/208 bytes packet mode
Input Output
Dimensions (W x D x H): 6.06” x 3.89” x 1.12” (154mm x 100mm x 29mm)
Weight: 0.5 lbs. (227g)
Power: USB 2.0 powered; no power supply required
OS Supported: Windows 7
General TS Input:TS Out:
Analysis Mode:7 analysis Window Tab:
Closed CaptionReal-time Decoder
ASI, SMPTE-310M, File, IP (UDP/TS or UDP/RTP/TS), RF 0~108Mbps (in 1bps step)188/192/204/208 bytes packet modeService, PID, Table, Service View, Bit-rate, TR 101 290, Table History
Software
RF DemodConnector:
Freq Range:Level Min:
8VSB, QAM64B, QAM256B1xF 75Ω57-1000 MHz-15 dBmV QAM256B-20 dBmV QAM64B -30 dBmV 8VSB
Recommended System Requirements: CPU better than Intel Core i3; more than 2 GB RAM; Windows 7
TEST
Related ProductsModel Description
BT-QAM-PRO QAM/8VSB/Analog TV Analyzer BTPRO-1000 QAM/8VSB/Analog Signal Analyzer; also offering Pro:Idiom™ Key Recovery OptionBTPRO-7000 HD Tablet/Touch Signal Analyzer; Cable Modem (CM) and Fiber Optic OptionsBTPRO-7000S HD Tablet/Touch Signal Analyzer; HD/SD QPSK/8PSK Satellite, 8VSB, QAM, Analog
17800-523-6049 | www.blondertongue.com
NOTES:
18 800-523-6049 | www.blondertongue.com
NOTES:
19800-523-6049 | www.blondertongue.com
One Jake Brown Road, Old Bridge, NJ 08857 USAPhone: 800-523-6049 • Fax: 732-679-4353
www.blondertongue.com
©2017 Blonder Tongue Laboratories, Inc. All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.