, Search Home I - MyPowerManual · Cummins QuickServe Online Page 1of2 , Search Home I Warranty II Searches Settinqs Products Promotions News Content For Engine Serial

Cummins QuickServe Online Page 1of2

, Search

Home I

Warranty II Searches II Settinqs Products II Promotions News

Content For Engine Serial (ESN):

Part Number Supersessions

Related Links

How to Find My Engine Serial Number (ESN)?

In general, Cummins engine serial numbers consist of eight (8) digits, e.g. 79012323.

If you have a hard copy of an Owners Manuai or an Operation and Maintenance Manuai or if you already have access to the oniine manuals, there is a procedure that describes how to find the engine serial number on your engine's dataplate. These steps will show you how to find that procedure and locate your engine serial number.

When using a hard copy manual go to the section titled "Engine Identification". This will show you where to find your engine serial number.

When using an online manual, follow these steps:

1. Click on "Engine Family Search" link in the left column of QuickServe Online. 2. Select your engine family from the drop down menu.

0 Note: If you are not sure which engine family to select, call 1-800-DIESELS, and they can help you determine the correct engine family for your engine.

3. Click "Search". It is not required that you select a Fuel System, Application or Build Year.

4. Click on the "Service" tab located across the top of the page. 5. Click on "Owners Manual" or "Operation and Maintenance Manual." 6. Select the appropriate manual. 7. Open the section titled "Engine Identification". This will show you where to find your

engine serial number.

If you do not have access to a manual the following instructions tell you where to physically find the ESN on the engine. This will vary based on the engine model. Please note that if your engine dataplate is missing or is not readable, the ESN is identified on the engine block.

ISM:

ISX:

ISB:

The dataplate is located on the fuel pump side of the engine, on the rocker housing. The following information is shown on the dataplate:

Engine Serial Number (ESN) Critical Parts List (CPL) Model Horsepower and RPM rating

• Emission statement (if applicable)

The engine dataplate, located on top of the rocker lever cover, provides the model identification and other important data about the engine.

Engine Serial Number (ESN) Critical Parts List (CPL)

• Model Advertised horsepower and RPM

The dataplate is typically located on the engine rocker cover, but may be located on the side of the gear housing. The engine serial number and CPL provide data for ordering parts and service.

NOTE: ISB engines are produced worldwide. The data plates used on engines may differ in appearance and location of information.

https:// quickserve.cummins.com/ q s2/q sol/service/find_ esn _tip.html 1/31/2012

Cummins QuickServe Online Page 2 of2

NOTE: If the engine dataplate is not readable, the engine serial number can be identified on the engine block on top of the lubricating oil cooler housing. Additional engine information is available by reading the ECM dataplate.

ISC and ISL:

The dataplate is located on the top side of the gear housing. It includes the following engine data:

Engine Serial Number (ESN) • Critical Parts List (CPL)

Model Horsepower and RPM rating

If the engine dataplate is not readable, the ESN can be found on the engine block on top of the lubricating oil cooler housing. Additional engine information is on the electronic control module (ECM) dataplate.

QSK45 and QSK60:

The dataplate on the QSK45 and QSK60 engines is located at the rear of the engine block opposite the starter. a includes the foJlov;ing data:

Engine Serial Number (ESN) • Critical Parts List (CPL) • Horsepower

RPM

PRINT THIS PAGE I EMAIL THIS PAGE

Box 3005, Columbus. IN 47202-3005 U.SA

~~-""=.1-'·""'""· I fu;Slllli:D?:IblfilLfui1iliirlJ.li55.'Jlt£Ilfi'li'!

https://quickserve.cummins.com/qs2/qsol/service/find _ esn _tip.html 1/31/2012

TRDIT DIES,EL

lnline 71 i

Engine Operator's Guide

ENGINE MODEL AND SERIAL NUMBIER DE.~IGNATION

The engine serial number and model

number are stamped on the cylinder

block in the following location (as

viewed from the front):

Left side, upper front corner just

below the fire deck.

Option Labels

Computerized engine option labels are

attached to the valve rocker cover.

These labels contain the engine serial

number and model number and, in

addition, list any optional equipment

used on the engine. Labels also

include required tune-up information

(injection timing, valve lash, max. no

load RPM, etc.). With any order fm parts, the engine

model and serial number must be

given. If a type number is shown on

the option label covering the equip

ment required, this number should also

be included on the parts order .

. lransmissions ar1d power take-offs

generally carry thei1· own name plates.

The model and serial number informa

tion on these plates is useful when

ordering parts for these assemblies.

Certification Labels

If requirnd, a certification label is

attached to the valve rocker cover.

This label certifies that the engine con

forms to federal and certain state emis

sions regulations for its particular

application. It also gives the operating

conditions under which certification

was made.

Location of Engine Serial and Model

Numbers

...

ENGINE MODEL, SERIAL NUMBER AND OPTION LABEL

The engine serial and model numbers are stamped on the cylinder block. See Figure 3. A guide to the meaning of the model number digits is listed in Table 2.

TYPICAL SERIAL NUMBER 06ROOOOOOO \

TYPICAL MODEL NUMBER 6067HG6E

47614

Figure 3 Location of Engine Serial and Model Number on Block

SERIES 60 SERVICE MANUAL

. Digit Value Meaning

1 6 Series 60 Engine

2 & 3 06 Six Cylinders

5 H 14 L Displacement

6 G .. DDEC VI Engine Control

7 & 8 2E EGR Coach

7 & 8 5E EGR Crane/Excavator .. 7 & 8 4E EGR Fire Truck

7 & 8 6E EGR On-Highway Truck

Table 2 Model Number Description for Series 60 Engine

For example, 6067-HG6E represents an 14 liter Series 60 engine that is controlled with DDEC VI electronics Exhaust Gas Recirculation (EGR) truck.

Option labels attached to the valve rocker cover contain the engine serial and model numbers and list any optional equipment used on the engine. See Figure 4.

Vvith any order for parts, the engine modei number with serial number should be given. In addition, if a type number is shown on the option plate covering the equipment required, this number should also be included on the parts order.

All groups or paiis used on a unit are standard for the engine model unless otherwise listed on the option plate.

- EXAMPLE -

THIS CHASSIS-CAB CONFORMS TO FEDERAL MOTOR VEHICLE SAFElY STANDARD NOS. 101, 1112. 1D3, 104, 106, 107, 111, 115, 116, 119, 124. 205, 206, 207, 208, 209, 210 AND 302.

THIS VEHICLE WILL CONFORM TO STANDARD NOS. 105, 108 AND 120 IF IT IS COMPLETED IN AC· CORDANCE WITH THE INSTRUCTIONS CONTAINED IN THE INCOMPLETE VEHICLE DOCUMENT FUR· NISHED PURSUANT TO 49 CFR PART 568.

CONFORMITY TO THE OTHER SAFETY STANDARDS APPLICABLE TO THIS VEHICLE WHEN COM· PU:TED IS NOT SUBSTANTIALLY AFFECTED BY THE DESIGN OF THE CHASSIS-CAB.

DATE OF MA.~UFACTURE

CHASSIS-CAB MFD BY HINO MOTORS, LID.

Fig. 1-2 SM1-060

Fig. 1·3 SM1-072

Fig. 1-4

2.

Models FA and FB

VEHICLE CERTIFICATION LABEL

The Vehicle Certification Label, as shown in Fig. 1-2, is affixed to the left hand side door of the cab. The name of manufacturer, production year and month, and verification of items which are in conformity with Federal Motor Vehicle Safety Standards are displayed.

3. ENGINE NUMBER

The Engine Number, as shown in Fig. 1-3 is on the left side of the engine block.

4. CHASSIS NUMBER

The Chassis Number is displayed on the left siderail of the frame near the front axle, as shown in Fig. 1-4.

(K.P.)

International® DT 466E, DT 466, 530, 530E, and HT 530 Diesel Engmes - lntrod.uct1on -... !'age Lor L

A34001

Engine serial number and emission label

1. Engine emission label

2. Engine serial number stamp

© 2011 Navistar, Inc.

file://C:\OEMData\Intemational\ISISII\engine\eges2101 7 .xml 2/9/2012

DT-466E and 530E Diesel Engme Service ( l YY) through l ';1':1'7) - ::::.bL l lUl''-1: 11'\l l Kuuu ... rage i or L

SECTION: INTRODUCTION

ENGINE IDENTIFICATION

When in need of parts, always specify the engine model and serial number.

The permanent engine serial number is stamped on the left side of engine ( 2, Figure i.1 ).

The Engine Emission Label identifies engine model code and year manufactured. The Emission Label is

located on the top of the valve cover/intake manifold ( 1, Figure lJJ.

Other nameplates, are located, on the turbocharger and starter. These nameplates, show manufacturer and

specifications and are important to assist operator or maintenance personnel as to what equipment is on the

engine and its operating conditions.

Figure i.1 Engine Serial Number and Emission Label

file://C:\OEMData\Intemational\ISISII\engine\el 60 _El 60IN.xml 2/17/2012

International® T 444E Diesel Engine - Model Years Late l 'J'J I to LUUj - imroauc.;non - D... ra.gc i u1 L

Engine Identification

Serial Number Location

The engine serial number is permanently stamped on the crankcase pad on the lower rear left side of the

engine.

Serial Number Location

Explanation of the Engine Serial Number

7.4 Engine Identification Code

H Type of Code: H=Diesel, turbocharged, air cooled and electronically controlled

M2 End Use Code: M2=Truck, A2=Stripped and service

u Country of Origin: U=U.S.A. or

N Country of Origin: N=Brazil (IESA)

file ://C :\0 EMData\Intemational\IS ISII\engine\eges205 _ 3 .xml 2/10/2012

2010 MaxxForce® 7 Diagnostics Manual - Engine Systems - Engine Identification - Engi ... Page 1of2

Engine Serial Number

The engine serial number is stamped on the crankcase pad, on the rear left side below the cylinder head.

Engine Serial Number Example

6.4HM2YXXXXXXX

6.4 Engine displacement (liters)

H Diesel, turbocharged, air-intercooled and electronically controlled

M2 Motor truck

y United States, Huntsville

7 digit suffix Sequence number

file://C:\OEMData\Intemational\ISISII\engine\eges485_S485000101.xml 6/11/2012

2007 MaxxForce® DT, 9 and 10 Engine Service Manual - tngme ::;ystems - tngme went ... Yage 1 or L



····-·------·· ······'·'·'·""""""""'"'"""""'""'"""··:·:···:···········-·---·····-·-·-- ·'··"""'"'"""'"'""'"""'":::··:·····--.. ····--·-···"·'·······

i.n!fl s~~~rfa~I n~.imber ,,,, ... -........................................... - ...•........

The engine serial number is in two locations:

• Stamped on a crankcase pad on the right side of the crankcase below the cylinder head.

• On the engine emission label on the valve cover.

Engine Serial Number Examples

MaxxForce® DT: 466HM2U3000001

MaxxForce® 9 and 10: 570HM2U3000001

file://C:\OEMData\Intemational\ISISII\engine\eges3351_3.xml 2/9/2012

<J [)


The vehicle identification number (VIN) is located on the left side rear of the engine block (1) and is typically a nine digit number stamped or laser-etched onto the engine at the vehicle assembly plant.

• The first digit identifies the division.

• The second digit identifies the model year.

• The third digit identifies the assembly plant.

• The fourth through ninth digits are the last six digits of the VIN.

Copyright© 2002 - 2012 Isuzu Motors America, Inc. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means (electronic, mechanical, photocopying, recording, or otherwise), without prior written permission of Isuzu Motors America, Inc.

http://www.kbtree.com/display.php?level=l,7,1,2,2

Page 1of1 <:;,,o

1/31/2012

<] [>

Number

The engine serial number is located on a boss on the left, rear of the engine block above the oil

filter.

Copyright© 2002 - 2012 Isuzu Motors America, Inc. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means (electronic, mechanical, photocopying, recording, or otherwise), without prior written permission of Isuzu Motors America, Inc.

http://www.kbtree.com/display.php?level=2,l,7

Page 1 ofl

1/12/2012

sman47470 node5863 Yage 1 or j

Visual Identification

Engine Model Identification (ASET™ AC ENGINE)

Engine Information Plate

The engine information plate is located on the top of the front cylinder head cover (back cover for LE and MR chassis). This plate includes information

concerning:

• Engine model, serial number and 11 GBA part number. • Advertised horsepower at rated speed rpm. • Emissions regulations to which the engine conforms and other pertinent information required by emissions regulations.

• Inlet and exhaust valve lash settings and engine brake slave piston lash setting.

The following explanations are provided to aid in interpreting some of the key information found on the engine information plate.

Item 1 - U.S. EPA Regulations

• An X in block 1 means the engine meets United States EPA regulations for the year stamped in block 4.

Item 2 = California Regulations

• An X in block 2 indicates the engine meets California emissions regulations for the year stamped in block 4. This engine is referred to as a 50-state

engine and can be sold in any state throughout the United States.

Item 3 - ADR Regulations

An X in b!ock 3 means the engine has been certified to meet Australian emissions regulations.

• One dash in block 3 indicates that the engine is not to be operated in Australia.

Item 4 - Model Year

• The four-digit number stamped in block 4 represents the year in which the engine was certified.

Item 5 - Federal Family

• The 12-digit number stamped in block 5 denotes the Federal Family to which the engine belongs, for emissions certification purposes.

• All engines will have a 12-digit Federal Family number in block 5.

• The letter in the Federal Family number further identifies engine configuration as follows:

V - Vocational ASET™ Al/AMI (IEGR) H - Highway ASET™ AC (CEGR) G - Natural gas engines P - (Pumper) non-road engine

Item 6 - California Family

• If the engine meets California emissions regulations, the same 12-digit number stamped in the Federal Family block will be stamped in the California

block. • If the engine does not meet California emissions regulations, there will be two dashes in block 6.

Item 7 - Exhaust Emission Control System

e These letters represent the basic engine systems that impact emissions and sre defined as follows:

EM - Engine Modification EC - Engine Control TC - Turbocharger CAC - Charge Air Cooler DI - Direct Injection SPL - Smoke Puff Limiter CEGR - Cooled Exhaust Gas Recirculation

Item 8 - Engine Brake

• This block is used only when the engine is equipped with an engine brake. The number stamped in this block indicates the brake lash setting as follows:

o J-Tech™ Engine Brake - 0.021 inch (0.53 mm) o Powerleash™ Engine Brake - 0.045 inch (1.143 mm)

Item 9 - PowerLeash™ Engine Brake

• An X in block 9 indicates the engine was built with a Powerleash TM engine brake camshaft.

Figure 1 illustrates the location of the information plate and Figure 2 illustrates its content. Figure 3 illustrates a completed sample information plate to be used

as an example.

http://secureus.macktrucks.com/impact3/static/lang/enUS/sman47470_node5863.xhtm 2/3/2012

sman47470 node5863 rage L 01 .J

Engine information Plate Location (ASET™ Al Engine Shown, ,l\C Same Location)

Engine Information Plate

Sample of Completed Plate

Engine Serial Number Identification

In addition to the engine information plate on the front cylinder head cover, the engine is also identified by the engine serial number stamped into the cylinder

block. This serial number is located on the block right side just below the turbo oil drain tube flange as shown in Figure 4.


sman47470 node5863 rage .) 01 :J


Description and Operation

ENGINE NUMBER

205i18a

Engine Design Features (ASET™ AC ENGINES)

In the fall of 2002, Mack Trucks introduced two new engines that comply with changes in governmental laws regulating engine emissions. Both engines

evolved from the E? E-Tech™ and continue with the electronic unit pump (EUP) fuel injection system and the V-MAC® Ill electronic control system. The core

change in the design of the two new engines, however, is the use of exhaust gas recirculation to lower combustion temperatures for control of nitrogen oxides

(NOx). Two different methods are used to accomplish this control. The methods are:

This manual covers only the ASET™ AC engine's CEGR design, in which a portion of the exhaust gas is "cooled" externally before it is recirculated through the

combustion chambers. The ASET™ Al engine's IEGR design receives complete service coverage in ASET™ Al/AMI Engines Service Manual 5-110.

Regardless of the method used, CEGR or IEGR, both designs are improvements based on changes in several design features of the E? E-Tech™ current

controlled rate shaping (CCRS) engine. The changes are more extensive and visible for the AC engine which is used in linehaul applications at lower governed

speeds, than the Al engine which is used in vocational applications at higher governed speeds.

• Internal Exhaust Gas Recirculation (IEGR)- Al/AMI engine

• Cooled Exhaust Gas Recirculation (CEGR) -AC engine

For linehaul operations covered by the CH and CX models, the AC engine lineup provides the optimum in economy and performance with reduced NOx

emissions. Included are both Econodyne® and Maxicruise®.

ASET™ AC Engine Applications ··---------- - -··-··-·- ----·-~-- - -----~ ---·--· ----··-·---·----··--

I Engine Chassis

I ASET™ AC MAXICRUISE®

AC-310/330 j CH, ex

AC-330/350 CH, ex

AC-355/380 CH,CX

AC-380/410 CH, ex

ASET™ AC ECONODYNE®

I AC-350 CH, ex

AC-400 CH, ex

I AC-427 CH, ex

AC-460 (E) CH, ex

I AC-460 (P) I CH, ex

The MACK Powerleash™ engine brake was introduced on ASET™ engines during mid-2003. The Powerleash™ brake is integrated into the rocker shaft

assemblies and uses the standard height cylinder head cover. Compared to add-on engine brakes, the Powerleash™ brake has lighter weight, increased

braking output, improved response and more consistent operation.


ENGINE MODEL IDENTIFICATION Page 5 of 5

Engine Serial Number Identification

In addition to the engine information piate on the front cylinder head cover,

the engine is also identified by the engine serial number stamped into the

cylinder block. This serial number is located on the block right side just below

the turbo oil drain tube flange as shown in Figure 4 -- Engine Serial Number.

Figure 4 -- Engine Serial Number

ENGINE NUMBER

© Copyright 2004 Mack Trucks, Inc. All rights reserved. Terms of Use

mk:@MSITStore:E:\MackTrnck\Diskl \23004\23004.chm: :/23004/s02-5 l 10.htrn 1/31/2005

ENGINE MODEL IDENTIFICATION Page 3 of 5

IEGR - Internal Exhaust Gas Recirculation

Item 8 - Engine Brake

• This block is used oniy when the engine is equipped with an engine

brake. The number stamped in this block indicates the brake lash setting

as follows:

- J-Tech™ Engine Brake - 0.021 inch (0.53 mm)

- PowerLeash™ Engine Brake - 0.045 inch (1.143 mm)

Item 9 - Powerleash™ Engine Brake

• An X in block 9 indicates the engine was built with a PowerLeash™

engine brake camshaft.

Figure 1 -- Engine Information Plate Location illustrates the location of the

information plate and Figure 2 -- Engine Information Plate iilustrates its

content. Figure 3 -- Sample of Completed Plate illustrates a completed sample

information plate to be used as an example.

Figure 1 -- Engine Information Plate Location

11

I 72d II

mk:@MSITStore:E:\MackTruck\Diskl \23004\23004.chrn: :/23004/s02-5 l 1 O.htm 1131/2005

ENGINE MODEL IDENTIFICATION

II

m1•nnm:; rnr.111[ mr:3,11in;;,1 iMloi>'>li:~\ ~~' ~ h>lk'·*-"'1~!jt~'.li.'~~~i~:J v··1~:\t.ht1i

o,-, ~,f ~I !"°A 1 lf.>fl"~l!l II-\ h'>ih.I t. ifld11~~ J~ }-"]H>; t~!H,:.:;1 ! ti.I ""-''-lm-··A.~~ lt

Figure 2 -- Engine Information Plate

ffif i':~~~~,~::~~~1,~~r:';"·, 5: f•"Z!f~)N\

wn:ull:iw.:it<+

Figure 3 -- Sample of Completed Plate

mk:@MSITStore:E:\Mack:Truck\Diskl \23004\23004.chm: :/23004/s02-511 O.htm

Page 4 of 5

II

11

1/31/2005

MEE 4000 SERVICE MANUAL

Figure 9

Figure 10

14

42588

Location of Engine Type Plate

ENGINE TYPE REFERENCE

HRYSLER DO BRASIL S.ri.: Av. Alfred Jurzykowske, 562

8.8. do Campo Sao aulo lndustria Brasileira Made in Brazil

G.C. 59. 104. 273/000129

0 OM 460 LA

0

460. 900 000 OQ 1

. -,

ENGINE SERIAL NUMBER

'42589

Engine Type Plate Detail

All information subject to change without notice.

6SE412 0206 Copyright© 2002 DETROIT DIESEL CORPORATION

MBE 4000 SERVICE MANUAL

ENGINE TYPE REFERENCE

Av. Alfred Jurzykowske, 562

S.B. do Campo Sao aulo lndustria Brasileira Made in Brazil

0 G.C. 59. 104. 273/000129

OM 460 LA 0

460.907-00-745111

/ ENGINE SERIAL NUMBER

43617

Figure 9 Engine Type Plate Detail

In addition to the fourteen-digit number on the engine type plate, there is a ten-digit number used

for warranty and service that is found on the DDEC-ECU label. The ten-digit number is derived

from the fourteen-digit number. See Figure 10.

Figure 10 Engine Serial Number

Alf information subject to change without notice.

6SE412 Copyright© 2006 DETROIT DIESEL CORPORATION

10-DIGIT ENGINE SERIAL NUMBER

LOCATED ON THE PLD-MR LABEL

43614

15

~ Service Manual MITSUBISHI

FUSO

00 General -

FE

Pub.No. TWSE8636-00

GENERAL - VEHICLE IDENTIFICATION NUMBER

9. VEHICLE IDENTIFICATION NUMBER

If & M ITSUBISHi MOTORS CORPORATION

0

VIN

I JW 6 IAI 0.1~ 111Cl61HIL1110101010111

80006

VIN plate

The vehicle identification number (VIN) consists of a

combination of 17 characters and numbers.

This plate is attached to the rear pillar on the driver

side.

J W 6 A D C 1 C 1 H L 106001

1.

2.

3.

4.

5.

6.

00-12

1TTTTTTTTTTT 1 2 3 4 5 6 7 8 9 10 11 12

Country J: Japan

Make vV: Mitsubishi Fuso

Type 6: Incomplete Vehicle ~

Gross Vehicles Weight kg (lbs.)/Brake system

A: 4531 to 6350 (10001 to 14000)/Hydraulic with vacuum servo assistance

Line D: FE434

Series (Wheel base) m (ft.)

C: 2.6 to 2.89 (8.5 to 9.5)

E: 3.2 to 3.49 (10.5 to 11.5)

F: 3.5 to 3.79 (11.5 to 12.5)

7.

8.

9.

10.

11.

Cab chassis type

Engine

Check digit

Model year

Plant

1: Chassis cab

C: 201 CID Diesel turbo (4D31T)

0, 1, 2, 3 ------ 9

H: 1987

K: Kawasaki-1

L: Kawasaki-2

M: Kawasaki-3

12. Plant sequential No. Serial number by type, plant, and model year

••

'

··.1, i/

GENERAL - POWER TRAIN TABLE I EQUIPMENT MODEL NOTATION

3. POWER TRAIN TABLE ., Model Engine Clutch Transmission Propeller shaft Final reduction

FE434CZSL

FE434EZSL C3W28 M3S5 D3H 5.181/0.739 6.333

FE434FZSL 4D31T P3

FE434CZKSL Torque M2A3 D2H converter 2.451/1.000 4.875

FE434EZKSL •.

4. EQUIPMENT MODEL NOTATION .•

Engine 4D31T

[IT~ With turbocharger Version number Diesel engine No. of cylinders (4: Four cylinders)

Clutch

rer~ Disc outer diameter • Facing material (W: woven) Typical weight of model in which the clutch is installed. Stands for clutch

Transmission rw No. of forward speeds (5: Five speeds) c Meshing (S: Synchromesh; A: Automatic) Typical weight of model in which it is installed. Stands for transmission

Propeller shaft P3 TT Typical weight of model in which it is installed. Stands for propeller shaft

Final reduction ' ff~ Teeth shape (H: Hypoid gear)

Typical weight of model in which it is installed. Stands for reduction and differential

j

00-4

!JJLl"l J. J.J_' J.'-'rl.. J. J.Vl,

IDENTIFICATION VEHICLE IDENTIFICATION NUMBER

VEHICLE IDENTIFICATION NUMBER PLATE The vehicle identification number plate is located on the upper portion of the driver's side rear corner panel.

~-====== The meaning of each character in the vehicle identification number is given in the sample below.

VEHICLE IDENTIFICATION NUMBER

n ~~ AA-110E

I @ ~:%~:~~~7:~EL l MOTOR CO., LTD.


AA·030E

Make Identifier Make Type Brake system. Cab Type

JNA

JNE

UD

Incomplete Vehicle

(Truck)

Truck

R: 4.169L Diesel with Turbocharger (TD42T)

Engine Type T: 4.169L Diesel with

Turbo/ I ntercooled (TD42TI)

Vehicle line, Series, Chassis GVWR Class

U4: UD1400(U41).4x2,Class4

GE-2-1

J: Hydraulic brake system

Cab-over-engine. Forward control

Model year

R: 1994

s: 1995 T: 1996

A: Ageo G: Gunma

Sequential Production Number ,

Rev. 9/95

IDENTIFICATION

IDENTIFICATION

___ -...,-/ ~CJ]\

VEHICLE SPECIFICATIONS LABEL

CGE3-002


Make Identifier Make Type

JNA

JNE

J

UD

Engine

Type

Incomplete Vehicle

Truck

8: 6,925L Diesel (FE6)

9: 6,925L

Diesel with turbocharger (FE6T)

O: 6,925L

Diesel with

turbocharger and

intercooler (FE6TA)

Vehicle Line, Series, Chassis GVWR Class

ME: UD1800(CME),4x2,Class5

LE: U02000 {CLE), 4x2, Class 6

LG: UD2300 (CLG), 4x2, Class 6

PA: U02600 (CPA), 4x2, Class 6

PH: U02800 (CPA), 4x2, Class 7

PJ: U03000SD (CPS), 4x2, Class 7

Brake System. Cab Type

J: Air-0ver-hydraulic brake system

Cab-0ver-engine, Forward control

Model

Year

..-------1 P Ian t Code

K: 1989

L: 1990

M: 1991

N: 1992

P: 1993

R: 1994

A: Ageo

G: Gunma

Sequential Production Number

GE-2-1 Rev.4/93

IDENTIFICATION

IDENTIFICATION.

''EHICLE IDENTIFICATION NUMBER

VEHICLE IDENTIFICATION NUMBER PLATE The vehicle identification number

piate is located on the upper

portion of the driver's side rear

corner panel. The meaning of each character in

the vehicle identification number

is given in the sample below.

EHICLE IDENTIFICATION NUMBER

r @ ~¢%:::~~~7:~EL 1 MOTOR CO., LTD.


AA·030E

q.t /9-

tl C> uDltoo q01300

Make Identifier Make Type Brake system. Cab Type

JNA

JNE

UD

Incomplete Vehicle

(Truck)

Truck

S: 3.465L Diesel with

Engine Turbocharger

Type R: 4.169L Diesel with

Turbocharger

N GJ~0 J

T Godel Number

I Vehicle Line, Series, Chassis GVWR Class

U4: UD1100 (U40), 4x2, Class 3

U4: UD1300(U40),4x2,Class3

Hydraulic brake system

Cab-over-engine, Forward control

Model

year

K: 1989

L: 1990

M: 1991

N: 1992 P: 1993

A: Ageo

G: Gunma

Sequential Production Number

G E-2-1 Rev. 4/92

IDENTIFICATION

UNIT IDENTIFICATION The chassis, engine and transmission serial numbers are stamped on the locations shown in the figures below.

Chassis serial number location

Engine serial number location

Transmission assembly and serial number !ocction

Manual transmission

Au1oma1ic transmission

Differential carrier assembly and serial number location

GE-2-2 Rev.4/94

ENGINE NUMBER SERIAL

T' engine . I number is

Ped on ~ '

seria . of the the right

!. der block. cy in

AA-0160

IDENTIFICATION

l transmission Manua

AA-058E

. transmission Automatic

AA-057E

Front a.,--.:/e

.7~

Rear a>.: 1"

GE-2-2 Rev. 1/91

AA-060E

SRHF-2

CGE1-006E

SRHL & SRHL-1

SRHH-1

.. "A" has been changed *·Location , .to Location "B'

· z arrier Dzfferentza c

IDENTIFICATION

~··~IT IDENTIFICATION i

.\1 •• ~ chassis, engine and transmission serial numbers are stamped on the locations shown in the figures below.

Chassis serial number location

Engine serial number location

EGE4-001A

FD35T

Transmission assembly and serial number location

Manual transmission

--- AA-070E

Automatic transmission

Volvo Trucks North America, Inc. Service Bulletin

Data Plate Locations Engine The Volvo 0120 engine serial number is located on the rear !eft side of the cylinder block.

The serial number is also located on the certificatio·n label on the valve cover.

The Volvo 012C engine serial number is located on the rear left side of the cylinder block.

The serial number is also located on the certification label on the valve cover.

On Cummins engines, the serial number is located on a data plate on the timing gear housing in front of the air compressor.

Date Group No. Page

12.2003 000 112 10(14)

I I II 012*123456*02*0 II

,,_ ________ _.W ..... 2004201

I 012*123456*02*C I

W2004202

...

Documents

, Search Home I - MyPowerManual · Cummins QuickServe Online Page 1of2 , Search Home I Warranty II Searches Settinqs Products Promotions News Content For Engine Serial