> PRODUCT CATALOGASTM-A615M and ASTM-A706M. Special rod orders to di˜erent chemical and physical characteristics (weldability, ductility, diameter and length, among others) based

www.grupoacerero.com.mx

> PRODUCT CATALOG

REBARMEXICAN STANDARD NMX–B-506

Nominal Dimensions

Tensile Requirements

Bar Designation

No.

Tensile Strength, min, psi (kg/cm2)

Yield Strength, min, psi (kg/cm2)

Elongation 8in (200 mm), min, %

3, 4, 5 y 6

7, 8

10 y 12

90000 psi (6,300 kg/cm2)

60000 psi (4,200 kg/cm2)

9

8

7

Bend Teste Requirements

Bar Designation

No.Grade 60 (42)

3, 4, 5

6, 7, 8

10

12

The rebar manufactured by GRUPO ACERERO meets the highest quality, attached to Mexican standard NMX-B-506-CANACERO–2011 and USA standard ASTM-A615M and ASTM-A706M.

Special rod orders to di�erent chemical and physical characteristics (weldability, ductility, diameter and length, among others) based on our markets’ requirements are also manufactured.

For all the steel grades, quality certificate ensuring compliance according to the relevant standard, is issued.

3

4

5

6

8

10

12

Bar Designation No. SizeDiameter

0.375

0.500

0.625

0.750

1.000

1.270

1.500

9.5

12.7

15.9

19.0

25.4

31.8

38.1

0.11

0.20

0.31

0.44

0.79

1.27

1.76

71

127

198

285

507

794

1140

0.376

0.668

1.043

1.502

2.670

4.303

6.464

3/8”

1/2”

5/8”

3/4”

1”

1” 1/4

1” 1/2

0.560

0.994

1.552

2.235

3.973

6.225

8.938

mmin

Cross-Sectional Area

in2 mm2

Nominal Weight Nominal Mass

lb/ft kg/m

G A S A 8 N 4 2

Point of origin Standard NMX-B-506

GradeDesignation No.Marking

GASA Point of origin

3, 4, 5, 6, 8, 10, 12 Designation No.

Type of steel(Standard NMX-B-506-CANACERO-2011)

Yield Strength, min, kg/cm2

N

42

Packaging specifications coil rebar

Diameter(mm) Weight lbs (kg) Internal Diameter External Diameter LengthBar Designation No.

2

3

4

5

7.9

9.5

12.7

15.9

3,174 lbs (1,440 kg)

5,291 lbs (2,400 kg)

3´ to 3´2”

(0.91 m to 0.97 m)

3´9” to 4´

(1.14 m to 1.22 m)4.82 ft - 5.90 ft

(1.47 m - 1.80 m)

These products earn the following LEED® credits thanks to regional, recycled material content

• Prerequisite MRp: Construction and demolition waste management planning.

LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials

• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.

Packaging specifications straight and bent rebar

NOTE: Cut to order based on customer needs (special lengths). Various corrugation types according to end consumer needs available.

Presentation Length Rods/ Package Packages/Bundle Rods/ Bundle Rods per ton (depending on length)

Bent

Straight

Straight

Bent

Straight

Straight

Straight

Straight

Straight

Straight

Straight

15 a 25

15 a 25

200

149 a 154

149 a 154

196 a 202

10 a 15

10 a 15

110

86 a 86

86 a 86

110 a 113

53 53 a 5537 37 a 38

21 21

13 13

Diameter (inches)

3/8”

3/8”

3/8”

1/2”

1/2”

1/2”

5/8”3/4”

1”

1” 1/4

1” 1/2

12.0 m

12.0 m

9.15m

12.0 m

12.0 m

9.15m

12.0 m

12.0 m

12.0 m

12.0 m

12.0 m 9

15 a 25

15 a 25

214 a 21

14 a 21

2

22

2

2

2

375

375

400

210

210

220

106

74

42

26

18 9

WIRE ROD


• Prerequisite MRp:Construction and demolition waste management planning.



Coil Specifications

a) Industrial wire rod (T) b) Construction wire rod (C)

Carbon steel wire it is used to manufacture other wires with finishes and specific uses within a particular industrial process.Uses: Wire drawing thinner wires, component finished products.The ability to manufacture special wire rod have: chemical composition with or without treatment, presentation, diameter, etc.

It is produced in diameters from 0.219 in to 0.866 in (5.5 mm to 22 mm), in three di�erent carbon contents: low, medium and high. According to customer requirements

Carbon steel wire used in the construction industry to form figures of reinforcing steel (stirrups and ties).

NMX-B-365

Weight lbs (kg) Internal Diameter External Diameter Length

3,150 lbs to 5,159 lbs

(1,430 kg to 2,340 kg)

Presentation

3´ to 3´2”

0.91 m to 0.97 m

3´9” to 4´

1.14 m to 1.22 m

3´11” to 6´4”

1.19 m to 1.93 m1.4t to 2.4t




Specifications

REINFORCING WELDED MESH


The reinforcing mesh is a welded mesh formed with steel rods arranged perpendicularly and joined by a process of electrical resistance welding. It is used as reinforcement of concrete floors, walls and slabs, and other special applications such as concrete pipes, canals and roads among others.

2.50 m x 6.0 m sheet

2.50 m x 40.0 m roll

6x6 10/10

6x6 8/8

6x6 6/6

6x6 4/4

Sizes Presentation

NMX-B-290, NMX-B-253, NMX-B-072

NOTE: Di�erent sizes can be manufactured, based on customer needs.

Specifications

PREFABRICATED REINFORCING WELDED ELEMENT ARMACERO

Is a reinforcement consisting of longitudinal and transverse wires welded together through resistance. Often it used as steel reinforcement in beams and columns.

It is supplied in sheets to wholesalers, who assemble the columns and distribute them through sub-wholesalers and retailers.





NMX-B-456

10x10-3

12x12-3

15x15-3

12x 12-4

15x 15-4

12x 20-4

15x 20-4

15x 25-4

15x 30-4

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

DesingIN 2R

Type

3R

5.72 mm

7.25 mm

7.94 mm

IN

2R

3R

3.60 mm

4.88 mm

4.88 mm

DiameterType

longitudinal G-60 transversal G-50

Specifications

PREFABRICATED LATTICE RIB ARMAGASA

Electrically armor in a product, used to manufacture semi-prefabricated concrete beams, consisting of three longitudinal rebars forming a triangular section, the lower are welded to the upper lattice stirrups smooth wire.

10-36

10-64

12-36

12-99

19.68, 22.97 and 29.52 ft

(6.0, 7.0 and 9.0m) sections

Availability to make other lengths

Size Presentation

14-36

14-64

14-99





NMX-B-455

Specifications

ANNEALED WIRE

The characteristic of our annealed wire is its ductility, making them optimal for moorings in work and in various industrial processes





Size Presentation

110 lbs to 661 lbs coil 10 to 18 gauge

( 0.135 in to .048 in)

NMX-B-072

2”

2 ½”

3 ½”

4”

55.12 lbs (25 kg) box

Size Presentation

Specifications

NAIL

Nail standard steel for construction. It is manufactured in measures 2 to 4 inches and is generally used for assembling wooden falsework.





NMX-B-505

5/32”

3/16”

¼”

5/16”

60

Size Grade Presentation

Specifications

COLD ROLLED REBAR MS-60

The Cold-Drawn Rebar MS-60 is highly resistant to stress, by its manufacturing process of cold rolling.

With this rebar you save up to 30% of the steel used in construction; compared to traditional hot rolled rebar.

Length 20´and 40´

Availability to make other lengths 6.5 ft to 40 ft





NMX-B-072

STIRRUP

The stirrup are steel wire rods bent into a di�erent shapes, which are placed perpendicular to the longitudinal reinforcement. They serve to position bars in the assembly of reinforcing elements. They are responsible to resist shear forces and diagonal tension that may a�ect an item.

Specifications





NMX-B-072

6.35 mm

Size Type of wire rod Presentation in packages of 100 pz. (kg)

13.4

15.5

18

20.4

15×15

15×20

15×25

15×30

STEEL ROUND BAR

Grupo Acerero commercial steel round bars are manufactured with the highest quality standards (ASTM-A-706, ASTM-A-36).

Additionally, special product orders, are manufactured with di�erent physical and chemical characteristics as required.

The Round Bar Product is a hot Rolled Carbon Steel Produced Commercial Quality.

Nominal Dimensions

Cross-Sectional Area Nominal WeightDiameterSize

in mm

Bar Designation

No. in2 mm2 lb/ft Kg/m

3

4

5

6

8

10

12

3/8”

1/2”

5/8”

3/4”

1”

1” 1/4

1” 1/2

Presentation

0.375

0.500

0.625

0.750

1.000

1.270

1.500

9.5

12.7

15.9

19.1

25.4

32.3

38.1

0.11

0.20

0.31

0.44

0.79

1.27

1.76

71

129

199

284

510

819

1140

0.376

0.668

1.043

1.502

2.670

4.303

6.464

0.560

0.994

1.552

2.235

3.973

6.404

8.938

20 ft or 45 ft- 3in, Bundle whit 1, 2 or 4 ton.





ASTM-A-706, ASTM-A-36

NOTE: Cut to lenght based on customer needs (special lengths).

CONTACT

www.grupoacerero.com.mx

Plant 122 Eje 122 and Avenida CFEZona Industrial 78395San Luis Potosi, SLP, MéxicoTel. +52 (444) 870 7100

Plant 132 / Sales o�ceEje 132 and Avenida Industrias, # 4530Zona Industrial 78395San Luis Potosi, SLP, MéxicoTel. +52 (444) 826 98 00

Plant 108Eje 108 S/NZona Industrial 78395San Luis Potosi, SLP, MéxicoTel. +52 (444) 824 78 95

Plant 128Eje 128, # 222Zona Industrial 78395San Luis Potosi, SLP, MéxicoTel. +52 (444) 824 20 14

Documents

> PRODUCT CATALOGASTM-A615M and ASTM-A706M. Special rod orders to di˜erent chemical and physical characteristics (weldability, ductility, diameter and length, among others) based