Printed from Grundfos Product Centre [2018.06.003] On request CRK 2-130/13 A-W-A-AUUV 50 Hz H [m] 0 10 20 30 40 50 60 70 80 90 100 110 120 130 0 5 10 15 20 25 30 35 40 45 50 55

GRUNDFOS DATA BOOKLET

CRK 2-130/13 A-W-A-AUUV 3x230/400Y 50HZ Grundfos pump 40907113

Thank you for your interest in our products. Please contact us for more information, or visit our website

https://www.lenntech.com/grundfos/CRK02/40907113/CRK-2-130-13-A-W-A-AUUV.html

[email protected]. +31 152 610 900 fax. +31 152 616 289

BE > THINK > INNOVATE

Printed from Grundfos Product Centre [2018.06.003]

Position Qty. Description1 CRK 2-130/13 A-W-A-AUUV

Note! Product picture may differ from actual product

Product No.: On requestMultistage, immersible, self-priming, centrifugalpump for vertical installation in tanks etc.

The pump has the following characteristics:- Installation length according to DIN 5440.- Impellers, intermediate chambers and spline

shaft are made of Stainless steel.- Mechanical shaft seal according to EN 12756.- Power transmission via cast iron

split coupling.

The motor is a 3-phase AC motor.Immersion depth: 358 mm

Liquid:Pumped liquid: WaterLiquid temperature range: -10 .. 90 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³

Technical:Rated flow: 41.7 l/minRated head: 85.1 mPrimary shaft seal: AUUVCurve tolerance: ISO9906:2012 3B

Materials:Pump head: Cast iron

EN-JL1030ASTM A48-30 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Installation:Maximum ambient temperature: 60 °CPipe connection: G 1 1/4Flange size for motor: FT115

Electrical data:Motor type: 90SBIE Efficiency class: IE2Rated power - P2: 1.5 kWPower (P2) required by pump: 1.5 kW

1/11


Position Qty. DescriptionMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 5.45/3.15 AStarting current: 850-930 %Cos phi - power factor: 0.87-0.82Rated speed: 2890-2910 rpmMotor efficiency at full load: 81.3 %Motor efficiency at 3/4 load: 85 %Motor efficiency at 1/2 load: 83 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F

Others:Minimum efficiency index, MEI ≥: 0.70Net weight: 25.9 kg

2/11


On request CRK 2-130/13 A-W-A-AUUV 50 HzH

[m]

0

10

20

30

40

50

60

70

80

90

100

110

120

130

Q [l/min]0 5 10 15 20 25 30 35 40 45 50 55

eta[%]

0

10

20

30

40

50

60

70

CRK 2-130/13, 3*400 V, 50Hz

P[kW]

0.0

0.5

1.0

1.5

NPSH[m]

0

2

4

6

P1

P2

3/11


H[m]

0

10

20

30

40

50

60

70

80

90

100

110

120

130

Q [l/min]0 10 20 30 40 50

eta[%]

0

10

20

30

40

50

60

70

CRK 2-130/13, 3*400 V, 50Hz

P[kW]

0.0

0.5

1.0

1.5

NPSH[m]

0

2

4

6

P1

P2

178

384

140

358

742 103

140

160

180

100

110

4 x 7.5G 1 1/4

32

L1 L2 L3

L3L2L1

LOW VOLTAGEDIRECTION OF ROTATION

HIGH VOLTAGEDIRECTION OF ROTATION

Description ValueGeneral information:Product name: CRK 2-130/13 A-W-A-AUUVProduct No: On requestEAN number: On requestTechnical:Rated flow: 41.7 l/minRated head: 85.1 mStages: 13Impellers: 13Primary shaft seal: AUUVCurve tolerance: ISO9906:2012 3BPump version: AModel: CMaterials:Pump head: Cast iron

EN-JL1030ASTM A48-30 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Material code: AInstallation:Maximum ambient temperature: 60 °CPipe connection: G 1 1/4Flange size for motor: FT115Connect code: WLiquid:Pumped liquid: WaterLiquid temperature range: -10 .. 90 °C

Liquid temperature during operation: 20 °C

Density: 998.2 kg/m³Electrical data:Motor type: 90SBIE Efficiency class: IE2Rated power - P2: 1.5 kWPower (P2) required by pump: 1.5 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 5.45/3.15 AStarting current: 850-930 %Cos phi - power factor: 0.87-0.82Rated speed: 2890-2910 rpmMotor efficiency at full load: 81.3 %Motor efficiency at 3/4 load: 85 %Motor efficiency at 1/2 load: 83 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: NONEMotor No: 85D05906Others:Minimum efficiency index, MEI ≥: 0.70Net weight: 25.9 kg

178

384

140

358

742103

140160

180

100

110

4 x7.5G 1 1/4

32

4/11


On request CRK 2-130/13 A-W-A-AUUV 50 Hzcos phi

eta

0.0

0.2

0.4

0.6

0.8

P2 [kW]0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0

I[A]

0.0

1.0

2.0

3.0

4.0

CRK2-130/13 + 90SB 1.5 kW 3*400 V, 50 Hz

eta

cos phi

I

n[rpm]

2000

2200

2400

2600

2800

P1[kW]

0.0

1.0

2.0

3.0

4.0

n

P1

5/11


On request CRK 2-130/13 A-W-A-AUUV 50 Hz

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

178

384

140

358

742 103

140

160

180

100

110

4 x 7.5G 1 1/4

32

6/11


Exploded view

301a

219

92

7

7a

77

301a

92

11

9

51

100

49

105

45

215a

215

18

217215a

534a534

531531a

28

17

251d

251a

6

11b

66a

67

530530a

7/11


Sectional drawing (TM058200 for TPE2,TPE3)

4

2 13

5

TM058200

8/11


Exploded view ( TM057026 for MGE model H/I )

251d

251b

290

287277a

286

277

273a

273

268268a289a289

288b288288a

251a

252b

156c

159d

156b

156d188

275a

153

154

158

178

185

192

191

159e

156c 156

151152

266

187

291

293

252a

172

150

287a

502

273b

157

9/11


Parts list CRK 2-130/13, Product No. On requestValid from 28.9.2012 (1239)

Pos Description Annotation Données de classification Référence Quantité Unité- Pump w/o motor 1 pcs+ 2 Pump head 1

2k Adapter flange 1- 4 Intermediate chamber cpl. 11

Intermediate chamber 145 Neck ring 165 Retainer 1

- 4a Intermediate chamber cpl. 2Intermediate chamber 1

45 Neck ring 165 Retainer 1

- 5a Chamber, bottom 13a Intermediate chamber 17 Coupling guard 27a Pan head screw 49 Hex socket head cap screw Designation: DIN 912 4

Length (mm): 25Thread: M8

10 Shaft pin Diameter: 5 1Length (mm): 26

10a Coupling half 226 Strap cpl. 428 Hex head screw Length (mm): 20 4

Thread: M836 Lock nut 437 O-ring 137.a O-ring 147a Bearing ring, rotating Internal diameter: 13.0 2

Outer diameter: 15.2Length (mm): 9.0Material type: TUNGSTEN CARBIDE

49 Impeller cpl. 1249.d Impeller cpl. 1

- 51 Shaft, spline, cpl. 1Pump shaft 1

62 Retaining ring 161 Spacer for shaft seal 164 Spacing pipe Internal diameter: 12,7 10

Outer diameter: 15,0Length (mm): 17,0

64.c Spacing pipe Internal diameter: 12,7 1Outer diameter: 15Length (mm): 4,15

64a Spacing pipe Internal diameter: 12,7 2Outer diameter: 15,0Length (mm): 7,3

66 Wedge lock washer 166a Washer Internal diameter: 10,5 4

Outer diameter: 21Thickness: 2,00

67 Lock nut Designation: A2 DIN985 1Thread: M8

69a Spacing pipe Internal diameter: 12,7 1Outer diameter: 15Length (mm): 40,5

76 Nameplate 176a Rivet 284 Strainer 184.b Combi Slot Torx screw 1

10/11


Pos Description Annotation Données de classification Référence Quantité Unité84c Disc spring 1105 Shaft seal Material type: AUUV 1

- 121 Retainer for strainer 1Retainer for strainer 1

85 Strainer, internal 1- 122 Priming screw 1

Priming screw 1Spacer 1

+ Motor 1 pcs

11/11

Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289

Documents

Printed from Grundfos Product Centre [2018.06.003] On request CRK 2-130/13 A-W-A-AUUV 50 Hz H [m] 0 10 20 30 40 50 60 70 80 90 100 110 120 130 0 5 10 15 20 25 30 35 40 45 50 55