Embed Size (px)
Citation preview
Maxkold Package
The Maxkold package, built with the maximum emphasis on quality, reliability and practicality at an unbeatable competitive price.
Evaporator• Ceiling mounted coolers
• Single phase
• Duties 1.5kw – 9.0kw
• R404a expansions valves pre-fi tted
• Pre installed heat exchanges
• Bluefi n anti-corrosion coil
• Powder coated light aluminium case
• Pre installed defrost heater
• 4 pole Axial fan motors
Condensing UnitComponents•
•
•
•
•
• Rotary
Control Panel• Large display area shows
all necessary information
• Icon LED status display
• Real time defrost schedule
• Supplied with 2 x 6 metre NTC probes
• 2hp compressor relay
• Pre wired relays
• Pre fi tted din rail
Medium / Low Temperature
www.maxkold.com
Sales Delivery Technical advice
Parts Energy effi cient
Qualitybuild
Quickinstall
Condensing Units • Refrigeration Products
Technical specifi cation
All products are sold within the Terms & Conditions of Maxkold Ltd. These are available on request.Maxkold Ltd has the right to make changes without prior notice.
MEDIUM - Chiller Room at +2C/-2C. Refrigerant R404A. Using Maxkold units with Maxkold Evaporators
Model Number
MaxkoldPackaged
Condensing Unit
MaxkoldCooler
No ofCoolerFans
CondensingUnit HP
Approx Room
Volume(m3)
SystemCapacity
(kW)
TEVModel
Orifi ceNo
ControllerLiquid LineSize
Suct LineSize
MaxPipe Run
MKP-M-001 NFR075DL LFJ7.5/2.0M 1 0.75 10 - 14 2.0 Danfoss TES-2 2# CM-B (3M) 3/8 1/2 15 M
MKP-M-002 NFR100DL LFJ7.5/2.0M 1 1 20 2.3 Danfoss TES-2 2# CM-B (3M) 3/8 1/2 15 M
MKP-M-003 NFR150DL LFJ11/2.8M 1 1.5 23 2.8 Danfoss TES-2 3# CM-B (3M) 3/8 1/2 15 M
MKP-M-004 NFR200DL LFJ14/3.6M 2 2 28 - 35 4.0 Danfoss TES-2 3# CM-B (3M) 3/8 5/8 15 M
MKP-M-005 NFR250DL LFJ18/4.6M 2 2.5 42 4.5 Danfoss TES-2 3# CM-B (3M) 3/8 5/8 15 M
MKP-M-006 NF200DGM LFJ14/3.6M 2 2 28 - 35 3.6 Danfoss TES-2 3# CM-B (3M) 3/8 3/4 27 M
MKP-M-007 NF200SGM LFJ14/3.6M 2 2 28 - 35 3.6 Danfoss TES-2 3# CM-B (3M) 3/8 3/4 27 M
MKP-M-008 NF250DGM LFJ18/4.6M 2 2.5 42 4.5 Danfoss TES-2 3# CM-B (3M) 3/8 3/4 27 M
MKP-M-009 NF250SGM LFJ18/4.6M 2 2.5 42 4.5 Danfoss TES-2 3# CM-B (3M) 3/8 3/4 27 M
MKP-M-010 NF300DMG LFJ20/5.4M 3 3 57 5.5 Danfoss TES-2 4# CM-B (3M) 3/8 3/4 27 M
MKP-M-011 NF300SGM LFJ20/5.4M 3 3 57 5.5 Danfoss TES-2 4# CM-B (3M) 3/8 3/4 27 M
MKP-M-012 NF350DGM LFJ26/6.8M 3 3.5 70 6.4 Danfoss TES-2 4# CM-B (3M) 1/2 3/4 27 M
MKP-M-013 NF350SGM LFJ26/6.8M 3 3.5 70 6.4 Danfoss TES-2 4# CM-B (3M) 1/2 3/4 27 M
MKP-M-014 NF400SGM LFJ28/7.8M 4 4 85 7.5 Danfoss TES-2 5# CM-B (3M) 1/2 3/4 27 M
MKP-M-015 NF500SGM LFJ35/9.0M 4 5 95 9.4 Danfoss TES-2 6# CM-B (3M) 1/2 7/8 27 M
MEDIUM = Ambient temperature room 27 c (80 c). Ambient temperature to condenser 32 c (90 c). Insulation 75mm polyurethane (sides, walls & fl oors) Product load based on 64kg/m3. Entering at no more than 4c above room temperature. Product Sp. Ht. 3.14kj/kg/k.
LOW = Ambient temperature room 27 c (80 c). Ambient temperature to condenser 32 c (90 c). Insulation 75mm polyurethane (sides, walls & fl oors) Product load based on 56kg/m3. Entering at no more than 5c above room temperature. Product Sp. Ht. 1.88kj/kg/k.
LOW - Freezer Room at -18 C. Refrigerant R404A. Using Maxkold units with Maxkold Evaporators
Model Number
MaxkoldPackaged
Condensing Unit
MaxkoldCooler
No ofCoolerFans
CondensingUnit HP
Approx Room
Volume(m3)
SystemCapacity
(kW)
TEVModel
Orifi ceNo
ControllerLiquid LineSize
Suct LineSize
MaxPipe Run
MKP-L-001 NFR075DL LFJ3.5/1.0L 1 0.75 2 0.7 Danfoss TES-2 0# CM-B (6M) 3/8 1/2 15 M
MKP-L-002 NFR100DL LFJ3.5/1.0L 1 1.0 3 0.9 Danfoss TES-2 0# CM-B (6M) 3/8 1/2 15 M
MKP-L-003 NFR150DL LFJ5.0/1.3L 1 1.5 4 1.2 Danfoss TES-2 1# CM-B (6M) 3/8 5/8 15 M
MKP-L-004 NFR200DL LFJ7.0/1.8L 1 2.0 7 1.7 Danfoss TES-2 2# CM-B (6M) 3/8 5/8 15 M
MKP-L-005 NFR250DL LFJ7.0/1.8L 1 2.5 8 1.9 Danfoss TES-2 2# CM-B (6M) 3/8 5/8 15 M
MKP-L-006 NF300DGM LFJ9.0/2.4L 1 3.0 16 2.4 Danfoss TES-2 2# CM-B (6M) 3/8 3/4 20 M
MKP-L-007 NF350DGM LFJ9.0/2.4L 2 3.5 20 2.4 Danfoss TES-2 2# CM-B (6M) 1/2 3/4 20 M
MKP-L-008 NF500SGM LFJ12/3.2L 2 5.0 28 2.8 Danfoss TES-2 3# CM-B (6M) 1/2 3/4 20 M
MKP-L-009 NF600SGM LFJ12/3.2L 2 6.0 35 3.2 Danfoss TES-2 3# CM-B (6M) 1/2 7/8 20 M
MKP-L-010 NF600SGM LFJ14/3.8L 3 6.0 42 3.5 Danfoss TES-2 3# CM-B (6M) 1/2 7/8 20 M
MKP-L-011 NF400SGL LFJ12/3.2L 2 4.0 28 2.8 Danfoss TES-2 3# CM-B (6M) 1/2 3/4 30 M
MKP-L-012 NF500SGL LFJ12/3.2L 2 5.0 35 3.2 Danfoss TES-2 3# CM-B (6M) 1/2 3/4 30 M
MKP-L-013 NF500SGL LFJ17/4.4L 3 5.0 45 4.4 Danfoss TES-2 3# CM-B (6M) 1/2 3/4 30 M
MKP-L-014 NF600SGL LFJ19/5.0L 4 6.0 60 5.0 Danfoss TES-2 3# CM-B (6M) 1/2 7/8 30 M
Maxkold Limited Part of the Max Group of Companies
Unit 9i Eley Estate Kynoch Road Edmonton London N18 3BD
Tel: +44 (0)20 8997 0476 Fax: +44 (0)20 8997 1367 Email: [email protected]
www.maxkold.com
