Upload
duongtuyen
View
215
Download
2
Embed Size (px)
Citation preview
SDP-900
Page 2
Special features
Special features Thank you for purchasing this product.This product is a high resolution video presenter that can project all kinds of data on a PC monitor, a TV, or aprojector with simple manipulations.
By adopting 12X super optic angle zoom lens, it is possible toshoot all materials from the size of a film to B4 size.
By adopting 1/2 inch PS type CCD, high resolution and excellentcolor reappearance are realized.
By using USB, it is possible to view or store the image in a PC andcontrol the functions of the set. Also it is possible to control theset by using RS-232C port.
It supports various output modes from XGA to VGA that it can beconnected to all kinds of projectors.
remote controller is supplied as a standard feature for the productso that it can be manipulated from a distance. Thus it is veryconvenient during a conference.
By adopting TV output mode, monitoring and conference data canbe recorded through VTR.
12X zoom lens (can be used for the materials with sizes from B4 to film)
Output modes from VGA to XGA
Adopted 850,000 pixel CCD
Can control USB and RS-232
remote controller is a standard feature
TV output mode
Page 3
Features
Features
Digital features on your Video Presenter provide useful andvarious image controls including:- Negative/Positive image conversion- Brightness and R/B color control- Image save/recall- Image freeze- Image divide
You can quickly switch between your computer presentation andyour document presentation with the INT/EXT button on thecontrol panel or on the remote controller.
To avoid any interruption of presentation to reset the videopresenter, you can preset up to 4 customized settings in thememory and simply recall it during the presentation.
Various image control
Input source selection
Custom user settings
SDP-900
Page 4
Contents
Contents
Safety precautions ..................................................................5Uses of video presenter .........................................................6Supplided accessories ...........................................................7Names and functions of each part ........................................8
Front side............................................................................8Main control panel ............................................................10Terminals at the back .......................................................11On the remote controller ...................................................12
Set preparation......................................................................14Connecting to output device ...............................................15
TV, PC Monitor or Projector..............................................15Desktop computer.............................................................16Computer ..........................................................................17Microphone .......................................................................17
Using the presenter ..............................................................18To see the image received from external device ..............18To project an object on the video presenter .....................20
Adjusting your image ...........................................................23
Notes on operations .............................................................27Storage...................................................................................28Trouble shooting...................................................................30Fuse and battery replacement .............................................31Specifications........................................................................32
Operation methods
Product features and structure
Before requesting service
Page 5
Safety precautions
Safety precautionsFollow these safety instructions when setting upand using your Video Presenter:1. Do not place the presenter on an unstable cart,
stand, or table
2. Do not use the presenter near water or sources ofheat.
3. Use the type of power source indicated on thepresenter. If you are not sure of the poweravailable, consult your dealer or power company.
4. Place the presenter near a wall outlet where theplug can be easily unplugged.
5. Take the following precautions for the plug.Failure to comply with these precautions couldresult in sparks or fire:Do not insert the plug into an outlet with dustpresent. Insert the plug firmly into the outlet.
6. Do not overload wall outlets, extension cords, orintegral convenience receptacles. This can causefire or electric shock.
7. Do not place the presenter where the cord can bewalked on. It may result in fraying or damage tothe plug.
8. Unplug the presenter from the wall outlet beforecleaning. Use a damp cloth for cleaning. Do notuse liquid or aerosol cleaners.
9. Do not block the slots and openings in thepresenter case. They provide ventilation andprevent the presenter from overheating. Do not putthe presenter on a sofa, rug, or other soft surfaceor in a built-in installation, unless proper ventilationis provided.
10. Never push objects of any kind through cabinetslots. Never spill liquid of any kind into thepresenter.
11. Except as specifically explained in this User'sManual, do not attempt to service this productyourself. Refer all servicing to qualified servicepersonnel. Opening or removing covers mayexpose you to dangerous voltages and otherhazards.
12. Unplug the presenter during lightning storms orwhen it will not be used for extended periods.
13. Do not place the presenter and remote controlleron top of heat-producing equipment or in aheated place, such as a car.
14. Unplug the presenter from the wall outlet andrefer servicing to qualified service personnelunder the following conditions:• When the power cord or plug is damaged or
frayed.• If liquid has been spilled into the presenter, or it
has been exposed to rain or water.• If it does not operate normally when you follow
the operating instructions, or if it exhibits adistinct change in performance, indicating aneed for service.
• If it has been dropped or the cabinet has beendamaged.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with theinstruction manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference in which case theuser will be required to correct the interference at his own expense.
SDP-900
Page 6
Uses of video presenter
Uses of video presenter
Conference
Detailed information in a report, form, table, etc. as wellas a three dimensional object, such as a model, can beprojected on a screen clearly that all the participantscan focus on the same topic during a conference. Thusit is very helpful for an effective progress of aconference.
Education
It can be used as an audiovisual tool for printedmaterials, such as text books, as well as audiovisualmaterials, educational materials, and especially forstudents' art works.
Medicine and science areas
It is possible to present various visual data includingslides and X-ray film etc. at a medical conference or adoctors' association in the order of file.
Demonstration or exhibition
By connecting to a large projector, it can producedynamic images at a new product demonstration, anexhibition, or an event.
Advertisement and design areas
It is useful in design area where visualization isnecessary. It is possible to project catalogs andslides, thus the effect of a job can be checked easily.
Page 7
Supplied accessories
Diskette
ProgramManual
Supplided accessories
User's Manual Audio & C-Composite cable S-video cable
remote controller Power cable Dust cover
Adaptor lens and Lens cap
SDP-900 program RS-232C Reference etc.
PC Monitor cable USB Cable
When you unpack your Digital Presenter, make sure that you have all these components.
SDP-900
SamSung VIDEO PRESENTER
SDP-900
Page 8
Name and function of each part
1
3
5
7
24
6
Name and function of each part
Front side
SDP-900
SDP-900
SamSung VIDEO PRESENTER
Page 9
Name and function of each part
1
3
5
7
2
4
6
LensCan rotate to the front and back.
Main support
Main lock buttonPress to move the main support.
Lamp unit(Upper lamp)
Document plate(built-in light box)
Main control panel(see next page)
IR Sensor
SDP-900
Page 10
Name and function of each part
1 3 4 5 6 7 8 9 102
Name and function of each part
Main control panel
The buttons on the main control panel can be found in the remote controller. These buttons perform the samefunctions.
POWER Use this to turn the power on or off.
FREEZEUse this to freeze the image.
AWCUse this to control the color automatically.
ZOOMUse this to control the size of an object projected on the screen.
FOCUSUse this to adjust the focus.
APERTUREUse this to control the sharpness of the outputimage.
MODEUse this to select the desired resolution for thevideo output device(PC monitor, projector)connected to this product.
INT / EXTUse this to select internal or external imageINT: to view the image on this product.EXT: to view the VGA output from another device
such as a PC monitor or a projector byconnecting it to this product.
LAMPUse this to turn the upper lamp or light boxon or off.
IRISUse this to control the brightness of the image by using the iris.
1 7
8
9
10
2
3
4
5
6
Page 11
Name and function of each part
1 4 5 6 72
3 9 108
Name and function of each part
Terminals at the back
POWER INPUT TERMINALUse this to connect the power cable. (100 - 240V,free voltage)
VGA VIDEO INPUT 1,2Connect this to the VGA output terminal ofanother VGA output device. When external input is selected, the image isshown through the VGA out terminal.
VGA VIDEO OUTPUT 1,2Connect this to the RGB input terminal of a PCmonitor or a projector.
USB: COMPUTER CONNECTIONTERMINALUse this to connect USB cable when transmittingimage by USB port.
TV OUTPUTConnect this to the TV input terminal.Connect this to view the image projected on theTV screen.Even when the external input is selected, only theimage on the main unit is displayed on TV output terminal.
AUDIO OUTPUT (LEFT/RIGHT)Connect this to the audio output terminal of a TVor a VCR or speakers.The sound from an external AV device ormicrophone is heard through this.
AUDIO INPUTConnect this to the audio output terminal of a PC.Connect this to listen to the sound from anotherAV device.
RS-232C: COMPUTER CONNECTIONTERMINALUse this to connect RS-232C cable.
S-VIDEO OUTPUT This is the video output terminal connecting to aTV that has S-video input terminal.
MICROPHONEUse this to connect the microphone to the mainunit.
1 6
7
8
9
10
2
3
4
5
SDP-900
Page 12
Name and function of each part
POWER
INT/EXT
FOCUS
EXITNTSC/PAL
PRESET
SAVE
SAVERECALL
DIVIDESHIFT
ACTIVE
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
MODE
AWC
F
+
- +
-
+
-
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
31
4
2
5
7
8
11
14
15
6
10
13
12
16
17
9
Name and function of each part
On the remote controller
Page 13
Names and functions of each part
POWERTurns power on or off.
INT/EXTAllows to choose the signal input to be displayed.
NEGA/POSISwitches for negative or positive film.
LAMPTurns the upper lamps and/or lightbox on or off.
FOCUSAllows to focus an object.F: Used to focus an object which is in the far
distance.N: Used to focus an object being close.
RED/BLUE/AWCAdjusts the image color.R +/-: Adjusts the red color.B +/-: Adjusts the blue color.AWC: Adjusts color automatically.
MODEAllows to choose the resolution of the VGA outputdevice connected to the Digital Presenter.
APERTUREControls the sharpness of the output image.
FREEZEKeeps the current image on the screen.
VOLUMEAdjusts the audio volume.
WIDE/TELE• Enlarges the image size.• Reduces the image size.
IRIS+ / IRIS-• Opens iris to increase the brightness.• Closes iris to decrease the brightness.
EXITStops current function and return to the normalmode.
NTSC/PALSwitches Video output mode to NTSC or PAL.
PRESET• Saves the customized user setting values.• Activates the preset user settings.
SAVE/RECALL• Saves the projected image into the memory of
this unit.• Recalls the image from the memory.
DIVIDEDivides the screen to see both of the currentimage and the image recalled from the memorysimultaneously on one screen or to see all theimages in the memory on one screen.
SHIFTShifts the recalled image shown in the dividedscreen from the left to right to see the hiddenportion of the image.
1
14
15
16
13
17
2
3
4
5
6
7
8
9
10
12
11
SDP-900
Page 14
Set preparation
1 2
3 4
5 6
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SamSung VIDEO PRESENTER
220V
110V
Set preparation
Press the main lock button andraise the main support
Raise the lamp unit until it isconvenient for use, and set it tothe center of the document plate.
Adjust the angle of the lampsproperly.
Turn the lens area to facedownward.
Remove the lens cap. Plug the power cord in.
Page 15
Connecting to output device
SDP-900
SamSung VIDEO PRESENTER
PC monitor, projector, etc.
Connect the yellow plug to the video input and white plug to the audio input port.
If you have a TV or monitor equipped withS-video terminal, you can connect to S-video jack.
Or
You may use 1or 2 jack.The signal from these jacks are equivalent.
Digital Presenter
Digital Presenter
Connect to the VGA input terminal
Set the resolution mode of the main unit to the maximun resolution of the external device connected.
If you connect to S-video terminal, you may obtain more clear image, but the signal from the external AV source(if connected) is not available on this terminal.
Connect the yellow plug to the VIDEO OUT and white plug to AUDIO OUT jack.
Note
Note
Connecting to output device
Connect a TV, PC monitor or Projector to thispresenter to display the projected image using the AVcables, S-video cable or PC monitor cable.If you use an optional microphone or if yourpresentation includes sound effects which is receivedfrom AUDIO IN jack, you need to connect the audiocable to AUDIO OUT jack.
TV, PC Monitor or Projector
Connection
SDP-900
Page 16
Connecting to output device
RS-232C cable is not provided with the presenter.You can obtain one from your computer dealer.
Note
SDP-900
SamSung VIDEO PRESENTER
Connect to the USB port on your PC,then install the supplied SDP-900 program.
Digital Presenter
Connect to the RS-232C terminal onyour PC.
Digital Presenter
Connecting to output device
Desktop computer
USB connection
RS-232C connection
For SDP-900, connect a desktop PC using USB cableand install the supplied SDP-900 program. You cansee the projected image on the PC monitor andcontrol the image as a graphic file using the program.RS-232C connection is available for advanced user. Ifyou connect a PC with RS-232C cable, you should setup your PC and make your own program to control theprojected image on PC. Ask your dealer for furtherdetails.
Page 17
Connecting to output device
SDP-900
SamSung VIDEO PRESENTER
Connect to VGA port on the comnputer equipped with XGA, SVGA or VGA graphic card.
Use a microphone equipped with ø6.3.
Connect to VGA IN terminal using the VGA cable from the computer.VGA IN terminal is available.
Digital Presenter
Connect to the VGA input terminal
Connecting to output device
Computer
Microphone
Connection
If you connect computerthrough VGA IN port, you canreceive video signal from thecomputer.
To enhance the presentation with the presenter's voice guidance, use a microphone.Microphone is not supplied with this presenter.
SDP-900
Page 18
Using the presenter
1
2
3
SDP-900
SamSung VIDEO PRESENTER
POWER
INT/EXT
FOCUS
MODE
AWC
F
+
- +
-
N
RED1
2
34
75
BLUE
POSI/NEGALAMP
POWER
INT/EXT
FOCUS
APERTUR
MODE
AWC
F
+
- +
-
+
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
When the digital presenter is powered on, the upper lamps turn on. To turn it off, press LAMP button of the presenter.
Note
Using the presenter
To See the image received from external device
Set up your digital presenter properly.(See page 14.)
Connect the input device from which you want to receive the image and the output device on which youwant tho see the image.(See pages 15 through 17.)
Turn the power of the input and output device, and the digital presenter on.
Page 19
Using the presenter
4
5
6
POWER
INT/EXT
FOCUS
MODE
AWC
F
+
- +
-
N
RED1
2
34
75
BLUE
POSI/NEGALAMP
EXITNTSC/PAL
P
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
MODE
AWC
F
+
- +
-
+
-
N
RED1
2
34
7
8
5
6
BLUE
SDP-900
SamSung VIDEO PRESENTER
EXT1 OUT
If NO EXT1 SYNC or NO EXT2 SYNC is displayed, check if the external input device is connected properly.
Note
Using the presenter
Choose the video source with the INT/EXT button of the presenter.
Open the image on the computer. Now you see the image through a PC monitor or a projector.
If necessary, you can adjust the audiovolume using the volume buttons on theremote controller.
• Each time you press the button, the display shows EXT1 OUT, EXT2 OUT, INT OUT.
• EXT1 OUT, EXT2 OUTView the image and sound from an external VGA outputdevice through a PC monitor or a projector connected tothe digital presenter.
• INT OUTChoose this mode to see the image through the lens ofthe digital presenter.
SDP-900
Page 20
Using the presenter
1
2
3
3
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SamSung VIDEO PRESENTER
POWER
INT/EXT
FOCUS
MODE
AWC
F
+
- +
-
N
RED1
2
34
75
BLUE
POSI/NEGALAMP
If there is no image on the TV, PC monitor or the projector check if the cable is properlyconnected, and press the INT/EXT button of the presenter to select the input mode toINT OUT.
Note
Using the presenter
To project an object on the video presenter
Set up your digital presenter properly.(See page 14.)
Connect to a TV, a PC monitor, a projector to display the image.(See page 15.)
Turn the power of the output device and the digital presenter on.
Place the object on the lightbox, and adjust the head to face theobject.
Page 21
Using the presenter
5
6
POWER
INT/EXT
FOCUS
APERTUREFRE
MODE
AWC
F
+
- +
-
+
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SamSung VIDEO PRESENTER
Using the presenter
Select a proper lighting source with the LAMP button of the presenter. Each time you press the button,upper lamps on, lightbox on, then all lighting off.
Remove or attach the adapter lens according to the objected.
Rotate the lens toremove or attach it.
• Attach the adaptor lens only in the camera mode(possible focal lenght: 1m ~ ∞)
• Remove the adaptor lens to view a material or adocument or a film placed on the documentplate.(Possible focal length: 230mm ~ 320mm)
• Beyond the possible focal length mentioned above, itmight be out of focus. So pay attention to thedistance between the object to be viewed and themain unit and whether the adaptor lens is attached.
Upper lamp. Use the upper lamps to project paperdocument and other material, and use lightbox lampto project transparencies.
Lightbox
SDP-900
Page 22
Using the presenter
7
8
POWER
INT/EXT
FOCUS
APERTU
MODE
AWC
F
+
- +
-
+
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
S
EXITNTSC/PAL
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
MODE
AWC
F
+
- +
-
+
-
N
RED1
2
34
7
8
5
6
BLUE
LAMP
To change the object projected during presentation, freeze the image on the screen usingFREEZE button of the presenter then change it.To cancel the freezing, press FREEZE button again or EXIT button on the remote controller.
Note
SDP-900
SamSung VIDEO PRESENTER
Using the presenter
Focus on the object.• Manual focus control: press [Focus F] or [Focus N] to adjust.• If the user want tho adjust more accurately, press the WIDE button to the maximum close-up then bring
the image into focus and then adjust to the desired screen size by pressing the TELE button.
You see the image on the TV, the PC monitor or the projector.• To use versatile image control features, see pages 23 through 26.
Page 23
Adjusting your image
EXITNTSC/PAL
PRESET
SAVE
SAVERECALL
DIVIDEACTIVE
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
ODE
AWC
-
+
-
7
8
5
6
EXITNTSC/PAL
PRESET
SAVE
SAVERECALL
DIVIDESH
ACTIVE
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
AWC
-
+
-
7
8
5
6
WIDE TELE
Adjusting your imageUse the control buttons on the remote controller or on the control panel of the presenter to adjust the projectedimage. Some of the main features are described below:
Press WIDE or TELE button on the remote controller to reduce or enlarge the image size displayed on thescreen.
You can also use ZOOM or ZOOM button of the presenter to achieve the same result.
Adjusting image size
Adjusting brightness
Press IRIS button on the control panel or IRIS + button on the remote controller to lighten the overallimage.
Press IRIS button on the control panel or IRIS - button on the remote controller panel to darken theoverall image.
SDP-900
Page 24
Adjusting your image
INT/EXT
FOCUS
APERTUREFREEZE
IRIS+WIDE
VOLUME
MODE
AWC
F
+
- +
-
+
-
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
POWER
INT/EXT
FOCUS
APERTURE
MODE
AWC
F
+
- +
-
+
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
FOCUS
EXITNTSC
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
MODE
AWC
F
+
- +
-
+
-
N
RED1
2
34
7
8
5
6
BLUE
LAMP
Positive
Normal image Rotated image
Negative
BLUE 90I I I I I I I I The color level chosen
will be displayed.
Adjusting your imageAdjusting image color
Positive and negative switching
Image sharpness control
For automatic color adjustment, press AWC button.
If you want to fine adjust, press BLUE +/- or RED +/- button on the remote controller button to increase ordecrease blue or red color factor manually.
Press NEGA/POSI button.Each time you press the button, POSI orNEGA appears alternately on the screen.Set to POSI to see normal object and setto NEGA to see negative film.
Press APERTURE button to control the sharpness of the output image of this product.- APERTURE ON: For a material mostly with words.- APERTURE OFF: For a material with many pictures or colors.
Hint:To obtain best result, put the camera lens facing thewhite paper and press AWC button.
Page 25
Adjusting your image
EXT
FOCUS
EXITNTSC/PAL
PRESET
SAVE
SAVERECALL
DIVIDESHIFT
ACTIVE
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
MODE
AWC
F
+
- +
-
+
-
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
EXT
FOCUS
EXITNTSC/PAL
PRESET
SAVE
SAVERECALL
DIVIDESHIFT
ACTIVE
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
MODE
AWC
F
+
- +
-
+
-
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
If you turn the power off, all the saved images will be lost.Note
Adjusting your imageSaving image in memory
Screen 2 divide and image shift
You can save the image up to 8 frames into your digital presenter's memory. After saving you wil be able torecall it.
You can see both the image of an object currently projected and the image saved in memory simultaneously onone screen.
To save the image into the memory, press SAVEbutton and specify the memory location within 4seconds using the number keys from 1 through 8.
If you want to recall the saved image frommemory, press RECALL button and press thememory location number wihin 4 seconds. If youpress and hold down RECALL button, all imagessaved in memory are displayed one by one.
If you want to exit from the recall mode, pressEXIT button.
The memory location numbers are printed on the rightside of these buttons. For example, if you want tosave the image into memory location 7, press SAVEthen press MODE button printed 7 at right side.
Press DIVIDE button and press the memorylocation number within 4 seconds to recall theimage you want to see.
To cancel this mode and return to normal mode,press EXIT button.
You can see theimage of an objectcurrently projectedat right side.
The recalled image from memory appearsat left side. Press SHIFT button to shift theimage from right to left. Each time youpress the button, a third of the image willbe moved from right to left.
SDP-900
Page 26
Adjusting your image
EXT
FOCUS
EXITNTSC/PAL
PRESET
SAVE
SAVERECALL
DIVIDESHIFT
ACTIVE
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
MODE
AWC
F
+
- +
-
+
-
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
EXT
FOCUS
EXITNTSC/PAL
PRESET
SAVE
SAVERECALL
DIVIDESHIFT
ACTIVE
APERTUREFREEZE
IRIS+WIDE
TELEIRIS-
VOLUME
MODE
AWC
F
+
- +
-
+
-
N
RED1
2
34
7
8
5
6
BLUE
POSI/NEGALAMP
You can not save the setting on the FREEZE, RECALL, DIVIDE, FOCUS and ZOOM(WIDE/TELE) buttons.
Note
1 2 3
4 5 6
7 8
1 2 3
34 5 6
7 8
SAMSUNG
SAMSUNG
Adjusting your image
Saving custom user settingsAfter you adjust feature value, you can save the value for next time use. You can save up to 4 different customuser settings.
To save the current value, press SAVE buttonand specify the memory location within 4 secondsusing the number keys from 1 through 4.
To recall your custom setting, press the ACTIVEbutton and press the memory location numberwithin 4 seconds.
The memory location numbers are printed on theright side of these buttons, For example, if you wantto save the feature into memory location 4, pressSAVE then press FOCUS N button printed 4 at rightside.
3x3 Multi-Screen
You can see all the images saved in memory simultaneously on one screen and choose one to dislay it.
Press DIVIDE button for 2 seconds or more, thenall the images saved in memory are displayed onthe screen.
To cancel this mode and return to normal mode,press EXIT button.
When you want to see one of them, press thenumber button to recall it.For example, if you want to see the image inmemory location 3, press BLUE + button andthe image is displayed on the screen.
Page 27
Safety precautions
Safety precautions
Please note that any slides, pictures, documents that are protected under the copyright law can't be reproduced without permission.
Do not place heavy objects.
Do not drop. Wipe with dry and soft cloth
Do not use in the humid or wet area
Use of benzene or thinner can damage the product.
SDP-900
Page 28
Storage
1 2
3 4
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SDP-900
SamSung VIDEO PRESENTER
Storage
Turn the power off and unplug thepower cord.
Attach the lens cap.
Turn the head upside down.While you pull the main lock buttontoward the front of the presenter,fold the head completely.
Page 29
Storage
5
SDP-900
SamSung VIDEO PRESENTER
SDP-900
SamSung VIDEO PRESENTER
Use the handle when you move it. When you do not use it for a long time, protect it with the cover supplied.
SDP-900
SamSung VIDEO PRESENTER
Fold the lamps on both sides completely.
?!
?!
?!
?!
?!
?!
SDP-900
Page 30
Troubleshooting
Troubleshooting
No image appears
- Check if the resolution of the output device corresponds to that of the video presenter.(For example, when the maximum resolution of a projector is SVGA and if the videopresenter is set to XGA, then no image appears.)
- Check if the input selection of the output device is appropriate.- Check if the iris control is adequate.- Check if the VGA cable is connected to the VGA output terminal correctly.- Check if there is any problem with the fuse.- Check if the lens cap is removed.
No communication between the PC and USB.
- Make sure the operating system is Windows 98 or later. It doesn t work on Windows 95.- For other detailed information, please refer to the program manual supplied with the product.
The light is not turned on right away after the LAMP button is pressed.
- It is a normal phenomenon occurring because the protection circuit is in operation to protectthe lamp.
The image is out of focus.
- Check if the adaptor lens is attached properly for the purpose. (Be sure to attach the adaptorlens in the camera mode.)
- Check if the distance from the object is too short.
No image from a slidefilm or a negative film.
- Check if the box is turned on.- Adjust the lens to face the film
directly.- Check if the NEGA/POSI button is selected properly.
remote controller is not working.
- Check the battery of the remotecontroller. Replace it with a new one.
If there are problems, pleasecontact the store you
purchased the product orour distributor nearest you.
Page 31
Fuse and battery replacement
1 1
2 2
3 3
Fuse
Spare fuse
Fuse and battery replacement
Take out the fuse holder .Open the battery compartment lid at the back of the remote controller.
Take out the fuse and replace it.Insert the batteries so that their with a new one.
Put the fuse holder back. Close the lid.
• Battery type:AAA type 1.5V• Fuse type:2A, 250V
Fuse replacement Battery replacement
SDP-900
Page 32
Specifications
Specifications
Specifications DescriptionLens F=2.8~3.3 f=6.4~73.6, 12x power zoomShooting Area Max: 384 x 272mm, Min: 50x 40mm
Optical system Zoom PoweredFocus PoweredIris Auto (with fine level adjustment)
Illumination systemUpper Attach to the side arm of the main unitLower Light box (built-in main unit)Pick-up Device/ 1/2" 850,000 pixels PS CCD / 1034(H) x 779(V)Effective pixelFrame rate 15 frame/secSync system Internal sync.
VGA output1024 x 768(XGA) RGB color, 800 x 600(SVGA) RGB color,
640 x 480(VGA) RGB colorC-Video VBS 1.0Vp-p / 75Ω (unbalance)
Video output S-Video Y: 1.0Vp-p / 75Ω (unbalance)C: 0.286Vp-p / 75Ω (unbalance)
White Balance Manual / Auto (one touch type)Positive / Negative SelectableFreeze built-in
Video Input terminals Microphone: 1, VGA:2, Audio:1Output terminals VIDEO:1, Audio:1, VGA:2, USB:1, RS-232C:1, S-Video:1NTSC / PAL Selectableremote controller SuppliedInput selection 3 channels (Internal: 1, External: 2)On-screen display AvailableImage freeze AvailableImage save Available (8 frames)Image recall Available (8 frames)Image divide Available (2/9 divide)Image transfer to computer Available (USB: full, 1/4, 1/16 mode)Preset function Up to 4 user settingsUSB built-in
PC connection RS-232C SET controlApplication software Windows application in Windows 98 or later.Operating temperature/ +5˚C ~ +35˚C, 30% ~ 90%HumidityPower AC 100V ~ 240V Free Voltage, 50/60Hz, 60W
GeneralDimensions(mm)
In-use: 676(W) x 537(H) x 558(D)Storage: 533(W) x 145(H) x 558(D)
Weight 11.5kgAccessories remote controller, Cables, etc.
Note: Spscifications are subject to change without notice.
SALES NETWORK
HEAD OFFICE : SAMSUNG TECHWIN CO., LTD145-3 Sangdaewon 1-Dong, Jungwon-Gu, Sungnam, Kyungki-Do,Korea 462-121TEL : 82-31-740-8137~8141 FAX : 82-31-740-8145
U.S.A OFFICE : SAMSUNG OPTO-ELECTRONICS AMERICA, INC.40 Seaview Drive, Secaucus N.J.07094, U.S.ATEL : 201-902-0347 FAX : 201-902-9342
http://www.samsungtechwin.comhttp://www.samsungcameraUSA.comhttp://www.samsungpresenter.com
P/No.: 6806-0317-01A