» Generator set data sheet Model: C550 D5e Frequency: 50 ...€¦ · Open Enclosed Dimensions Air Standby Rating Prime Rating Combustion air, m3/min 36.27 32.50 Maximum air cleaner

C550 D5e50Diesel

1/4 1/2 3/4 Full 1/4 1/2 3/4 Full

8.0 13.6 19.3 26.7 7.3 12.6 17.7 22.9

36.5 62.0 88.0 121.7 33.4 57.4 80.6 104.2

Model:Frequency:Fuel Type:

» Generator set data sheet

©2012 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand and “Our energy working for you.” are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others.Document no. DS349-CPGK-RevE - 24/2/2012

Spec sheet: SS11-CPGK

Noise data sheet (Open/enclosed): ND50-OS550 / ND50-CS550

Airflow data sheet: AF50-550

Derate data sheet (Open/enclosed): DD50-OS550 / DD50-CS550

Transient data sheet: TD50-550

Fuel consumptionStandby Prime

kVA (kW) kVA (kW)

Ratings 550 (440) 500 (400)

Load

gph

L/hr

Engine Standby Rating Prime Rating

Engine manufacturer Cummins

Engine model QSX15 G8

Configuration 4 Cycle; In-Line; 6 Cylinder Diesel

Aspiration Turbo Charged and Charge Air Cooled

Gross engine power output, kWm 500 444

BMEP at set rated load, kPa 2675 2371

Bore, mm 137

Stroke, mm 169

Rated speed, rpm 1500

Piston speed, m/s 8.4

Compression ratio 17:1

Lube oil capacity, L 91

Overspeed limit, rpm 1500 ±10%

Regenerative power, kW 37

Governor type Electronic

Starting voltage 24 Volts DC

Fuel flowMaximum fuel flow, L/hr 424

Maximum fuel inlet restriction, mm Hg 127

Maximum fuel inlet temperature (°C) 71

Open Enclosed

Dimensions

Air Standby Rating Prime Rating

Combustion air, m3/min 36.27 32.50

Maximum air cleaner restriction, kPa 3.73 - 6.22

ExhaustExhaust gas flow at set rated load, m3/min 82.2 75.3

Exhaust gas temperature, °C 515 488

Maximum exhaust back pressure, kPa 10.2

Standard set-mounted radiator coolingAmbient design, °C 50

Fan load, KWm 16

Coolant capacity (with radiator), L 65.9

Cooling system air flow, m3/sec @ 12.7mmH2O 11.35

Total heat rejection, BTU/min 16700 13700

Width Height

Maximum cooling air flow static restriction mmH2O 25.4

Weights*Unit dry weight kgs 4137 5442

5106 1553 2447

Unit wet weight kgs 4975 6280

* Weights represent a set with standard features. See outline drawing for weights of other configurations

Length

Genset outline

Open set

Enclosed set

Outlines are for illustrative purposes only. Please refer to the genset outline drawing for an exact representation of this model.

Standard open set dimensions 3427 1500 2066

Enclosed set standard dimensions


Connection1

Wye, 3 Phase

Wye, 3 Phase

Formulas for calculating full load currents:

Alternator data

125/105C S/P HC5D 380-440V

150/125C S/P HC5E 400V

Applicable for supplying power continuously to a constant electrical load for unlimited hours. Continuous Power (COP) in accordance with ISO 8528, ISO 3046, AS 2789, DIN 6271 and BS 5514.

Three phase output Single phase output

Ratings definitionsEmergency Standby Power (ESP)

Limited-Time running Power (LTP):

Prime Power (PRP) Base Load (Continuous) Power (COP)

Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. Emergency Standby Power (ESP) is in accordance with ISO 8528. Fuel Stop power in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514.

Applicable for supplying power to a constant electrical load for limited hours. Limited Time Running Power (LTP) is in accordance with ISO 8528.

Applicable for supplying power to varying electrical load for unlimited hours. Prime Power (PRP) is in accordance with ISO 8528. Ten percent overload capability is available in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514.

Telephone: +44 (0) 1843 255000

Fax: +44 (0) 1843 255902

E-Mail: [email protected]

Web: www.cumminspower.com

See your distributor for more information.

Temp rise °C VoltageAlternatorDuty2


Cummins Power Generation

Manston Park, Columbus Avenue

Manston, Ramsgate

Kent CT12 5BF, UK

73x0.8Voltagex1.

kWx1000Voltage

x1000haseFactorkWxSingleP

6 5 4 3 2 1

6 5 4 3 2 1

D

C

B

A

D

C

B

A

R R

R

D

C OF G

( FIXING CRS)1387

'A' OA ENCLOSURE LENGTH

'C' OA ENCLOSURE WIDTH

793 787 787 793

OA SKID LENGTH4561

RECOMMENDED LIFTING CLEARANCE

3685

GLAND PLATE �q�

502

113

C OF G SEE TABLETWO POINT LIFT

60�$�

`B' LIFTING BRACKET HEIGHT

OA ENCLOSURE HEIGHT

2320

GLAND PLATE �q�

3572

REL NO REV NO REVISION DWN CHKR APVD DATE

ECO-166919 H 1 SEE SHEET 3 PMS DPA B.WELLS 22DEC16

2 SEE SHEET 4 PMS DPA B.WELLS 22DEC16

DO NOT

SCALE

PRINT

TOLERANCE UNLESS STATED

ALL DIMENSIONS IN MMSIM TO - DRAWN N SHANKHPAL

CUMMINS POWER GENERATION

DIM

X �#� 3

X.X �#� 1

X.XX �#� 0.5

COPIED

FROM -CHECK V S PRASDH

THIRD ANGLE

PROJECTIONAPPR P SACHDEVA

TITLE

ENCLOSURE OUTLINEANG TOL �#� 1.0�$�

HOLE

0.09 - 4.99 +0.15/-0.08

5.00 - 9.99 +0.20/-0.10

10.00 - 17.49 +0.25/-0.13

17.50 - 24.99 +0.30/-0.13

THIS DOCUMENT (AND THE INFORMATION SHOWN

THEREON) IS CONFIDENTIAL AND PROPRIETARY

AND SHALL NOT BE DISCLOSED TO OTHERS IN

HARD COPY OR ELECTRONIC FORM, REPRODUCED

BY ANY MEANS, OR USED FOR ANY PURPOSE

WITHOUT WRITTEN CONTEST OF CUMMINS INC.

DATE 21MAR08 SITE CODE

DRAWN TO

SCALE OF:1:15

FOR INTERPRETATION

OF DIMENSIONING AND

TOLERANCING, SEE

BS 8888

FIRST USED ON

QSX15PGK

DWG SIZE

A1DWG NO

0500-5079CAD SHEET

1 OF 4

PTC Creo Parametric

MODEL ENGINEDRY WEIGHT

(Kg)

WET WEIGHT

(Kg)

WET WEIGHT

WITH FUEL

(Kg)

OIL SUMP

CAPACITY (L)

USABLE FUEL

CAPACITY

(L)

DIMENSION (mm)C OF G

(mm)A B C D

C400D5E QSX15G8 5057 5274 5866 83 711 5106 2447 1553 969 2602

C450D5E QSX15G8 5147 5364 5956 83 711 5106 2447 1553 967 2623

C500D5E QSX15G8 5147 5364 5956 83 711 5106 2447 1553 967 2623

C550D5E QSX15G8 5277 5494 6086 83 711 5106 2447 1553 964 2667

C450D6E QSX15G9 5147 5364 5956 83 711 5106 2447 1553 967 2623

C500D6E QSX15G9 5277 5494 6086 83 711 5106 2447 1553 964 2667

INSTALLATION NOTES:

1. PLEASE ALLOW THE FOLLOWING PARAMETER CLEARANCES

AROUND THE ENCLOSURE:

SIDE (WITH DOOR CLOSED): 1100mm

ABOVE THE CANOPY: 1100mm

2. PLEASE REFER TO MANUAL FOR TWO-POINT LIFTING INSTRUCTIONS

3. HEAVY DUTY AIR CLEANER EXTRA WEIGHT: 27kg

4. CABLE ENTRY DIMS: 260 X 170

5. (NOTE REMOVED)

6. GENSET SHOULD NOT BE LIFTED WITH FUEL IN TANK

AIRFLOW

GENSET WITH NORMAL DUTY AIRCLEANER & HC5 ALTERNATOR (STANDARD SKID)

EMERGENCY STOP

GLAND PLATE

10 SLOTS �n�24 X 30 LG

(5 EACH SIDE)


EACH ON OPP. SIDES

AIR INTAKE

AIR INTAKE

CEPGG 1-01-01-116. This item impacts compliance with these External Regulations:

Regulatory Review and Approval is required prior to changing this item per

ECO-166919 Sheet 1 of 5Part Name: 0500-5079 Revision: H

Drawing Name: 0500-5079 Revision: H

6 5 4 3 2 1

6 5 4 3 2 1

D

C

B

A

D

C

B

A

R R

R

TWO POINT LIFT

60�$�


3685



CRS793 CRS787 CRS787 CRS793

OA SKID LENGTH4561

113 FIXING CRS1387


OA ENCLOSURE HEIGHT

2320

REL NO LTR NO REVISION DR CHKR APPROVED DATE

ECO-166919 H - - PMS DPA B.WELLS 22DEC16

DO NOT

SCALE

PRINT




DIM

X �#� 3

X.X �#� 1

X.XX �#� 0.5

COPIED


THIRD ANGLE


TITLE


HOLE

0.09 - 4.99 +0.15/-0.08

5.00 - 9.99 +0.20/-0.10

10.00 - 17.49 +0.25/-0.13

17.50 - 24.99 +0.30/-0.13








DRAWN TO

SCALE OF:1:15

FOR INTERPRETATION

OF DIMENSIONING AND

TOLERANCING, SEE

BS 8888

FIRST USED ON

QSX15PGK

DWG SIZE

A1DWG NO

0500-5079CAD SHEET

2 OF 4

PTC Creo Parametric

GENSET WITH NORMAL DUTY AIRCLEANER & HC4 ALTERNATOR (STANDARD SKID)

AIR INTAKE

AIR INTAKE

AIRFLOW

EMERGENCY STOP

GLAND PLATE


(5 EACH SIDE)





6 5 4 3 2 1

6 5 4 3 2 1

D

C

B

A

D

C

B

A

R R

R


C OF G SEE TABLE

GLAND PLATE �q�

3572

D

C OF G

GLAND PLATE �q�

502

OA SKID LENGTH4561


OA ENCLOSURE HEIGHT

2320


3685

TWO POINT LIFT

60�$�


FIXING CRS1390

100 914 912 912 912

( )1575.5

( )2784.5 ( )210

( )210

(2X

)81


ECO-166919 H 1ZONES A2,A3;NOTE "(DUAL SKIN TANK SKID)" WAS

"(EXTENDED FUEL TANK SKID)" PMS DPA B.WELLS 22DEC16

MODEL ENGINEDRY WEIGHT

(Kg)

WET WEIGHT

(Kg)

WET WEIGHT

WITH FUEL

(Kg)

OIL SUMP

CAPACITY (L)

USABLE FUEL

CAPACITY

(L)

DIMENSION (mm)C OF G

(mm)A B C D

C400D5E QSX15G8 5278 5495 6240 83 719 5106 2447 1553 936 2604

C450D5E QSX15G8 5369 5586 6331 83 719 5106 2447 1553 935 2628

C500D5E QSX15G8 5369 5586 6331 83 719 5106 2447 1553 935 2628

C550D5E QSX15G8 5499 5716 6461 83 719 5106 2447 1553 933 2670

C450D6E QSX15G9 5369 5586 6331 83 719 5106 2447 1553 935 2628

C500D6E QSX15G9 5499 5716 6461 83 719 5106 2447 1553 933 2670

DO NOT

SCALE

PRINT




DIM

X �#� 3

X.X �#� 1

X.XX �#� 0.5

COPIED


THIRD ANGLE


TITLE


HOLE

0.09 - 4.99 +0.15/-0.08

5.00 - 9.99 +0.20/-0.10

10.00 - 17.49 +0.25/-0.13

17.50 - 24.99 +0.30/-0.13








DRAWN TO

SCALE OF:1:15

FOR INTERPRETATION

OF DIMENSIONING AND

TOLERANCING, SEE

BS 8888

FIRST USED ON

QSX15PGK

DWG SIZE

A1DWG NO

0500-5079CAD SHEET

3 OF 4

PTC Creo Parametric

GENSET WITH NORMAL DUTY AIRCLEANER & HC5 ALTERNATOR (DUAL SKIN TANK SKID)

AIRFLOW

AIR INTAKE

AIR INTAKE

EMERGENCY STOP


EACH ON OPP. SIDES


(5 EACH SIDE)

GLAND PLATE





6 5 4 3 2 1

6 5 4 3 2 1

D

C

B

A

D

C

B

A

R R

R


GLAND PLATE �q�

3572

C OF G SEE TABLE


3685

OA ENCLOSURE HEIGHT

2320



FIXING CRS1390

TWO POINT LIFT

60�$�

OA SKID LENGTH4561

100 CRS914 CRS912 CRS912 CRS912

GLAND PLATE �q�

502

D

C OF G

( )1575.5 ( )210

( )2784.5 ( )210

(2X

)81


ECO-166919 H 2ZONE A2;NOTE "(DUAL SKIN TANK SKID)" WAS

"(EXTENDED FUEL TANK SKID)"PMS DPA B.WELLS 22DEC16

DO NOT

SCALE

PRINT




DIM

X �#� 3

X.X �#� 1

X.XX �#� 0.5

COPIED


THIRD ANGLE


TITLE


HOLE

0.09 - 4.99 +0.15/-0.08

5.00 - 9.99 +0.20/-0.10

10.00 - 17.49 +0.25/-0.13

17.50 - 24.99 +0.30/-0.13








DRAWN TO

SCALE OF:1:15

FOR INTERPRETATION

OF DIMENSIONING AND

TOLERANCING, SEE

BS 8888

FIRST USED ON

QSX15PGK

DWG SIZE

A1DWG NO

0500-5079CAD SHEET

4 OF 4

PTC Creo Parametric

GENSET WITH NORMAL DUTY AIRCLEANER & HC4 ALTERNATOR (DUAL SKIN TANK SKID)

AIRFLOWEMERGENCY STOP


EACH ON OPP. SIDES


(5 EACH SIDE)

GLAND PLATE

AIR INTAKE

AIR INTAKE





Part A024H090 H

Part Specifications :A024H090 H

Description Legacy Name External Regulations Application Status Release Phase Code Security Classification Alternates

OUTLINE,ENCLOSURE 0500-5079 CE Production Only Production Confidential

Name Description Legacy Name

A030B356 SPECIFICATION,MATERIAL CES10903

A024B668 DRAWING,ENGINEERING 0500-5079





Documents

» Generator set data sheet Model: C550 D5e Frequency: 50 ...€¦ · Open Enclosed Dimensions Air Standby Rating Prime Rating Combustion air, m3/min 36.27 32.50 Maximum air cleaner