| bakerhughes.com

Talon Force High-Velocity PDC Drill BitsTaking PDC bit performance to the next level

The newest advancement in bit technology—the

Talon Force PDC bit—builds upon this foundation

by introducing improvements to cutting and

mechanical efficiency through:�� Next-generation cutter technology �� Cutter geometry enhancements�� Optimized cutter layouts�� Lateral stability improvements

Since its introduction in 2012, the

Baker Hughes Talon™ family of bits

has been proven as the industry standard

for PDC bits, delivering high-performance

cutting, mechanical, and hydraulic efficiency.

Both the Talon and Talon 3D products still

deliver superior directional control and high

build-up (BUR) and penetration rates (ROP) in

challenging environments.

Designed for improved performance

Cutting efficiency: Advanced diamond technology helps cutters stay

sharper longer to increase ROP and footage

Mechanical efficiency: Stable, efficient, and durable designs deliver

superior performance

Hydraulic efficiency: Optimized hydraulic energy at the bit ensures

maximum cuttings evacuation to boost ROP

CUTTING

EFFICIENCY

EFFICIENCY

HYDRAULIC

EF

FICIEN

CY

MEC

HANIC

AL

1

StaySharp™ 2.0 cutterNext-generation family of cutters stays sharper

longer for increased ROP and footage.

Stabilis™ reinforced cutterNovel cutter geometry improves durability and

reduces torsional oscillations.

Talon Force bit profilesApplication-specific bit profile boosts ROP and

run life, improving mechanical efficiency and

durability while minimizing vibration.

Optimized cutter and blade layoutsDesigns maximize stability and drilling efficiency.

Shaped gauge padTungsten carbide and thermally stable PDC materials

protect gauge pads and keep bits in gauge longer.

Geometry optimizes maximum cuttings evacuation.

Short shankDecreases make-up length for higher levels of

control in conventional directional drilling.

Increases bit side force on rotary steerable systems.

The Talon Force high-velocity PDC bit

2

New technologies for every drilling need

In order to provide industry leading

technology for our PDC bits, our cutter

laboratory continually drives rapid prototype

development and learnings, having cut more

than 10 million ft (3 million m) of rock in

the last 3 years with experimental cutter

technology on our vertical turret lathe.

Over the past several years, Baker Hughes

has vastly expanded its resources from a

personnel and capability standpoint, almost

tripling cutter research resources since 2010.

In addition, Baker Hughes has invested in

state-of-the-art laboratory equipment and

analysis tools.

By combining our lab and development

resources with the latest manufacturing

breakthroughs, we’ve been able to design

the new StaySharp 2.0 cutters to deliver

industry-leading results.

StaySharp 2.0 PDC cuttersThrough extensive laboratory and field testing, Baker Hughes has developed the next generation of PDC cutters.

StaySharp 2.0 cutters have been augmented with the latest high-pressure/high-temperature synthesis technologies

for superior wear resistance, toughness, and thermal stability.

0

0.5

1

1.5

2

2.5

3

3.5

Nor

mal

ized

Res

ourc

es

Cutter Research Growth

0

1

2

3

4

5

6

Genesis™

BitQuantec™

Bit Quantec

ForceStaySharp StaySharp

2.0

Rela

tive

Cutt

ing

Dist

ance

StaySharp 2.0 Wear Resistance 2.5 times increase

2010 2011 2012 2013 2014 2015

3

Stabilis reinforced cuttersThe new Stabilis PDC cutters from Baker Hughes improve torsional

stability and increase cutter durability, delivering longer runs and

higher ROP in the most challenging applications. Where traditional

PDC cutters fail due to abrasion or breakage, a new geometric

design protects the cutters while maintaining performance.

In a lab environment, Stabilis cutter testing has shown a 185%

improvement in impact strength when compared with standard

cutters. Overall cutting distance prior to failure was tripled when

using this technology compared to a standard cutter.

Stabilis cutters have set new performance benchmarks in highly

interbedded formations-drilling through conglomerates, chert,

and pyrite inclusions with ease.

Stabilis reinforced cutters not only add durability, but they also

offer benefits in torsional stability. A bit using these cutters sees a

decrease in torque fluctuations while drilling. Controlling torsional

oscillations leads to smoother, more stable drilling resulting in

higher ROP and improved overall performance of the run.

In an application with up to 50% chert layered throughout the

interval, Stabilis cutters generated lower and more consistent

torque and reduced weight on bit requirements–significantly

improving drilling efficiency and increasing ROP.

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

Standard Cutter Stabilis Reinforced Cutter

Impact Strength

0

0.5

1

1.5

2

2.5

3

3.5

Impact Strength Wear Resistance

Relative Performance Comparison

Standard Cutter Stabilis Reinforced Cutter

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3,900 4,400 4,900 5,400 5,900

Torq

ue, k

ft*l

b

Hole Depth, m

Competitor Talon Force with Stabilis

4

Optimized cutter layoutsTalon Force drill bits combine these latest

technology advances with application-specific

cutting structures designed to maximize

overall ROP and footage drilled. Bit profiles

have been designed to promote ideal cutter

loading while combining the optimum

aggressiveness and durability to

meet any drilling objective.

Enhanced lateral stability Using optimized blade layouts and strategic

radial positioning, Talon Force bits have

maximized lateral stability, leading to better

use of downhole power and more efficient

drilling. Additionally, this is done in conjunction

with hydraulic efficiency—maximizing cleaning

area to evacuate cuttings and keep cutters

cooler for increased bit life.

Talon Force bit nomenclature

T D 5 06 F S X

Standard Product – BlankD-Technology™ – D

Cutter Size

2 -- 5/16 in. 8 mm

3 -- 7/16 in. 11 mm

4 -- 1/2 in. 13 mm

5 -- 5/8 in. 16 mm

6 -- 3/4 in. 19 mm8 -- 1 in. 25 mm

S -- Steel Body BLANK -- Matrix

T -- Talon

Blade Count X -- Backup Cutters

Talon Select – S

F -- Force

5

�� Stay Sharp 2.0 cutter–improve cutter abrasion and impact resistance

and cutter thermal stability�� Stabilis reinforced cutter–improve torsional stability and bit durability�� Frame enhancements–improve lateral stability and cleaning efficiency

and optimize aggressiveness for a given application

For more information on how Talon Force bits can take your drilling to the next level, contact your local Baker Hughes representative or visit us at BakerHughes.com/TalonForce.

Improved ROP and distance drilledThe improved behaviors of the

Talon Force bit compared to

standard Talon products is evident

with our proprietary bit response

software, the BitGenie™ drill bit

selection tool. By capitalizing on

cutting and mechanical efficiency

gains, Talon Force solutions

improve overall ROP and footage

to maximize performance.

0

20

40

60

80

100

Talon Talon Force

Cleaning Efficiency

Lateral Stability

Torsional Stability

Side Cutting

Bit Durability

Cutter Abrasion

Resistance

Cutter Impact

Resistance

Cutter Thermal Stability

Aggressiveness

Bit Response Comparison

6

© 2015 Baker Hughes Incorporated. All rights reserved. 42914 09/2015

Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affiliates do not make any warranties or representations of any kind regarding the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including those of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the information provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.

| bakerhughes.com