2
WIRED REPEATER for JAMMER “A Flexible Wired Repeater for Jamming CDMA, GSM PCS & WCDMA Signals” Low Band ANT High Band ANT External Noise Source External Noise Source 2 External Noise Source 1 Repeater 2 Repeater 3 Repeater 1 Internal Noise Source Internal Noise Source Auto Swicthing Line Repeater CDMA GSM PCS WCDMA Create a mute zone ( “mobile comm. blackhole” ) within the targeted region by amplifying and transmitting jamming signals from external sources Provide seamless jamming signals in case of the disruption in external jamming source by utilizing built-in internal noise source Expand the coverage by simply connecting another FineREM_WRJ in cascade Synopsis : A Proud Member of FineDigital’s Remote Equipment Manager Family

: A Proud Member of FineDigital’s Remote Equipment Manager

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

WIRED REPEATER for JAMMER

“A Flexible Wired Repeater for Jamming CDMA, GSM PCS & WCDMA Signals”

LowBandANT

HighBandANT

ExternalNoise

Source

ExternalNoise

Source 2

ExternalNoise

Source 1 Repeater 2

Repeater 3Repeater 1

InternalNoise

Source

InternalNoise

Source

Auto Swicthing

Line Repeater

CDMA GSM PCS WCDMA

Create a mute zone ( “mobile comm. blackhole” ) within the targeted region by amplifying and transmitting jamming signals from external sourcesProvide seamless jamming signals in case of the disruption in external jamming source by utilizing built-in internal noise sourceExpand the coverage by simply connecting another FineREM_WRJ in cascade

Synopsis

: A Proud Member of FineDigital’s Remote Equipment Manager Family

Wide jamming coverage per repeater, up to 500 meters from the repeater (the figure given when the field signal strength is under -90dBm)Able to cover four frequency bands : CDMA (850 MHz), GSM (900 MHz),PCS (1.8 GHz), WCDMA (2.1 GHz)Support both internal and external jamming sources, allowing bump-less switching in case of disruption in external jamming sourceReadily configurable to single source, multi-repeater setup by connecting multiple FineREM_WRJ in cascade to a single external source, allowing even wider coverageAlarm setting for input source levels, VSWR, excessive output power (auto shutdown)Built-in rechargeable backup battery, ensuring min. 1 hour operation without AC powerRepeater status monitoring/control, firmware download (by plugging in FinREM_RMS)

Parameters Specifications Remarks

Dynamic range

Gain control

IMD

Internal noise source

Bandwidthaccuracy

Electrical power

Dimension

Weight

8th floor, Fine Venture Bldg., 345-1, Yatap-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-828 KOREATEL. 82-31-788-8845 / FAX 82-31-788-8890 http://www.finedigital.com E-mail:[email protected]

-56 ~ -11dBm

17~47dBm(50W) ±2dB CDMA,GSM,WCDMA

20~49dBm(100W) ±2dB PCS

11~41dBm(12.5W) ±2dB

20~75dB

1dB

±1dB

e45dBc Max output

±1MHz CDMA, GSM

±2MHz PCS, WCDMA

1.5

AC 100~240V, 50/60Hz

Min. 1 hour operation

450 X 735 X 330

55Kg

VSWR

AC

Backup battery

W X H X D (mm)

Kg

Range

Step

Accuracy

External source

Input

OutputInternal source

External source

Below 30MHz

Above 30MHz

Key Features

Product Specifications