Embed Size (px)
Citation preview
For rotating camshaft on BMW Mini W10, W11
Kit Including BMW119-540, BMW119-550 BMW119-340, and the extra pcs for the Turbo on N12, N14 eng.
[email protected] * [email protected]
www.germancartoolsplus.com * 928-234-6349BMW118-250BMW118-370 Timing Tool Set
BMW119-540/550 Camshaft Timing KitFor locking camshaft in TDC position when checking/adjustingcamshaft timing, replacing inlet camshaft or timing chain on N12, N14 (1.4, 1.6 16V)Mini Cooper engines from 2007-2010 (R55/56 with N12, N14 engine
BMW N13-18 Camshaft Alignment KitAdjusting/checking cam timing on BMW N13, N18 Engines.
BMW113-260 Camshaft DeviceComprehensive tool kit to retain the camshaft on the N14 turbocharged Mini Cooper engines. The press mounts to the cylinder head using two special bolts (included) that thread into the spark-plug holes and retain/locate the fixture. The press arms engage the camshaft and provide a downward force ... allowing the bearing caps to be removed without fear of bending or breaking the fragile/hollow camshafts. Truly massive construction.Application: 2008+ Mini Clubman S - R55 chassis - N14 engine2007+ Mini Cooper S - Coupe R56 chassis - N14 engine2009+ Mini Cooper S - Convertible R57 chassis - N14 engine
Adjusting or checking cam timing on Kit including: BMW 212-831 Cam timing tool, BMW212-830 GaugeBMW219-548 pin, BMW119-340 Chain tensioner
BMW N20, N26 EnginesBMWN20-26 Camshaft Alignment Kit
TTS1300 TurboCharced EngineCam Timing Kit
BMW315-140 Assembly ToolFor removing and installing control arm fromhydraulic mount while installed on BMW R50, R52, R53,
2 pcs 12 point Wrench set for Mini Cooper N12, N14, N16,and N18 engines.Applicable: All Mini Cooper models from 2007 with N12,N14, N16, N18 engines
BMW116-210 Serpentine Belt Wrench Set
For the vibration damper when releasing and tighteningdown the central bolt on Mini Cooper W11, W17
BMW118-460 Crankshaft Holder
For crankshaft when releasing/tightening central bolt on BMW N12, N14, N40, N42, N45, N46, N52 (when replacingtiming chain)
BMW119-280 HolderR50(W17)2002-2006, R52(W11)2003-2008,R53(W11)2001-2007
For extracting Crankshaft Pulley on Pulley number: 1123 7525 135
R53/W11
TTS1198 Head and Holder
For installing and removing vibration damper on R53( )W11
For the vibration damper when releasing and tightening down the central bolt on W11, W17
BMW118-450 Crankshaft Pulley Puller
For R&R the locking ring of the fuel tank delivery sensor unit on BMW E31, E34, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, R50, R52, R53
BMW161-020 Fuel Level Sending Unit
For holding the Serpentine belt tensioner onthe non-supercharged Mini Cooper
Kit including: Holder Locking Pin
R50, R52/W10 engine
BMW118-390BMW118-280
BMW118-280/118-390 Serpentine Belt Kit
Bush#31126757561, 31126757562
For replacing the rubber mount (hydro-mounts) in left orright control arm on R50, R52, R53, R55, R56 Mini Cooper
BMW315-150 Control Arm Bushing Kit
BMW118-410/118-470 Serpentine Belt KitFor holding the Serpentine Belt Tensioner on the supercharged Mini Cooper
Kit including: Locking pin Holder
R52, R53 / W11 engine
BMW 118-470BMW 118-410
14mm 12 point 3/8”drive BMW spark plug socket for 2007 and later BMW 135, 335, 535 and X6 with 3.0l twin-turbo, and 2007 and newer turbo charged Mini Coopers
TTS2151-14mm Spark Plug Socket
BMW513-240 Window Wrench300mm long Hook wrench for adjusting the door window glass to fit. Needed to release the star washer.This is the wrench to remove the large tooth nuts holding the door glass to the window regulator on R50, R52, R53 Mini Cooper and Cooper S.The wrench fits between the door glass and exterior seal to loosen or tighten the nuts to remove, install, and adjust the door glass. Commonly used during replacement of window motor, or door lock actuatorApplication:2002-2006 R53 Mini Cooper, 2002-2003 Cooper R502002-2003 Cooper S R53, 2002-2006 Cooper R502005-2006 JCW Hardtop R53, 2005-2008 Cabrio R522005-2008 Cabrio S R52, 2005-2008 JCW Cabrio R52
[email protected] * [email protected]
www.germancartoolsplus.com * 928-234-6349
BMW130-320 Fuel Injector R and R ToolFor R&R the high pressure, direct-injection fuel injectors on
N55: single turbo inline 6, produced from 2009-presentfeaturing turbo VANOS, Valvetronic and Direct Injection.
BMWN20, N55 engine .
[email protected] * [email protected]
www.germancartoolsplus.com * 928-234-6349
