8220-1/28 12V Max Cordless Rotary Tool Kit

KIT INCLUDES:• (28) Accessories.• (1) Wrench.• (1) Micro-Case.

FEATURES:• 12V MAX Lithium-Ion battery technology, 33% longer run-time than the Dremel 8200 cordless rotary tool when cutting screws.• Separate on/off switch and speed control.• Cool-running ball bearing construction.• Variable Speed: 5,000 to 30,000 RPM.• Can use with all Dremel rotary tool accessories & attachments.

Part No. 1-829-8220Reg. Net Price $218.05

$18534

More information @ KBCTools.com

Model 5-MSPPart No. 1-440-505000Reg. Net Price $244.32

$19546

INCLUDES:• Garden hose adapter.• Removable inlet screen for easy cleaning.• Lifetime oil supply.• Pumps down to 1/8".• 10 ft. power cord.

FEATURES:• 1/6 HP shaded pole motor with overload protection.• Designed for continuous duty.• Epoxy coated cast aluminum housing.• Viton shaft seal.

Water Wizard®

Submersible Utility Pump

FEATURES:• Resolution: .0005" (.01mm).• At turn-on, the large LCD screen displays the actual slider position ready to start measurement.• Keeps track of its origin point once set.• No more repeated zero setting necessary with the absolute encoder technology as well as no more care for overspeed errors.• Supplied in a fitted plastic case.

Range: 0-6" (0-150mm)Part No. 1-808-500171Reg. Net Price $232.00

$19720

0-6" ABSOLUTE Digimatic CaliperWith SPC Output & Thumb RollerSeries 500 The Next Generationof Electronic Calipers!

Jobbers length drills are designed to perform in a wide variety of normal conditions and in a broad range of materials in both machine and portable drilling.

HIGH SPEED STEEL

RIGHT HAND

118o POINT

1/16" - 1/2" by 64thsPart No. 1-001A-0290Reg. Net Price $214.18

$17134

29 Pc. Jobbers Drill Set

d d1

r

TL85o

11oAPXT Coated Carbide Inserts85° APXT, Parallelogram, 11° Positive Rake

Grade PC-5300: For milling of steel.Tough sub-micron substrate. Has low co-efficient of frictions to prevent built-up edge.

Grade PC-5300Dimensions

$19.4024.05

Insert Part No. Reg. Style L d T r d1 6-APX- Net Price

-200-210

APXT 1035PDSR-MM 0.407" 0.263" 0.12" 0.020" 0.112" APXT 1604PDSR-MM 0.650 0.376 0.227 0.031 0.175

$14.5518.04

SALE!

KBCTools.comWEB:

1-888-KBC-TOOLPHONE: M-F 8am - 8pm, EST

5 2 2 8 6 6 51-800-668-5615FAX: FAX ORDERS 24/7

JUL-SEP 2020

Industrial Metalworking Tooling & Solutions Since 1965

14" x 40" Gearhead Metal Lathe2 HP, 240V, 1 PH Motor

FEATURES:• Line interruption switch system needs a restart after a power failure.• Guideway and gears in headstock are all hardened and precision ground.• Spindle foot brake in the cabinet stand for easy operation and reliable safety.• Safety guard with limit switch protection.• Speeds (8): 70-2,000 RPM.• Net Weight: 1,150 lbs.• Shipping Weight: 1,375 lbs.

fullYear

Warranty2

ModelKC1440ML-2Part No. 6-125-062A

$6,89900

FINANCE AS LOW AS$155.84/mo.CALL FOR DETAILS

GORILLAGRIP® 9 PC. FOLD-UP HEX END TOOL SETFREEFREE

With Any Online Order $14900 or More!

Valid 7/1/20 - 9/30/20Registered Customers Only.

One Time Use.

INCH SIZES .050" - 3/16"

COUPON CODE:FREE720C

®

PART NO. 1-927-12591FG

A A $$779898 VValue!alue!A $798 Value!

2

Industrial Metalworking Tooling & Solutions Since 1965Cutting Tools ....................................... 1, 3-7Carbide Tooling .................................. 3, 8-9Fluids ......................................... 1, 3, 32, 36Workholding Tools .............................. 10-13Abrasives ...................................... 14-15, 36Measuring & Inspection ........ 1-2, 16-21, 36Toolroom Accessories ........................ 22-23Hand Tools ....................................... 2-3, 33Shop Supplies ................. 1-3, 30-31, 35-36Power / Air Tools ................................. 1, 34 Machinery ....................................... 1, 24-29

QUICK INDEX

100% SATISFACTIONGUARANTEED: If you are not 100%satisfied for any reason just return the unused item(s) inits original packaging within30 days, with your receipt for areplacement, exchange, full credit or refund.

FREE SHIPPING: Orders over $375.00 (50 lbs. weight limit per order) SHIPPED FREE - via our standard shipping method.Some restrictions may apply.

DAMAGED, LOST, OR SHORT SHIPMENTS: It doesn’t happen often, but if it does, call your local courier office immediately, and advise KBC so that we can reship and place a claim. Please keep dam-aged goods and containers until the claim is closed.

TRUCK SHIPMENTS: KBC is not responsible for merchandise damaged or lost by motor freight carriers. If the shipment is damaged or short one or more packages, please have it noted by the truck driver on receipt and freight bill. If you accept a short or damaged shipment from the truck driver without proper notation by the driver, you do so at your own risk.

PRICING: KBC Tools & Machinery traditionally holds prices for the duration of its sales flyers. As industrial market conditions continue to change across North America (tariffs, raw material, and price increases), KBC reserves the right to change prices based upon inventory conditions and supplier price increases without notice. BUY NOW! KBC Tools & Machinery strives to be your choice for all your tooling needs.

MINIMUM ORDER: Only $25.00, to cover processing costs.

OOPS!: Errors do occur, so mistakes are subject to correction. Sorry for any inconvenience.

SAT ISFACTION

* Excludes Machinery & Non-Stock Items.

99% of All Orders Ship the Same Day... Or you can Pick Up at your Local Branch.* Your Choice.

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

Check out the bigred lockers outside our KBC Mississauga location.Just order during regular business hours and pick up your order anytime!Your tools... your time.

24/7 All Tools...All The Time.

24/7 PICK-UP LOCKERS

Some restrictions may apply.

FLAT RATESHIPPING

On All Online Ordersup to 50 lbs.

FREE SHIPPINGFREE SHIPPINGORDERS OVER $37500

Industrial Metalworking Tooling & Solutions Since 1965Cutting Tools ....................................... 1, 3-7Carbide Tooling .................................. 3, 8-9Fluids ......................................... 1, 3, 32, 36Workholding Tools .............................. 10-13Abrasives ...................................... 14-15, 36Measuring & Inspection ........ 1-2, 16-21, 36Toolroom Accessories ........................ 22-23Hand Tools ....................................... 2-3, 33Shop Supplies ................. 1-3, 30-31, 35-36Power / Air Tools ................................. 1, 34 Machinery ....................................... 1, 24-29

QUICK INDEX

Yes! We’reOPEN

We’re KeepingNorth AmericaWORKING

COUNT on KBC!

COUNT on KBC!

You can

COUNT on KBC!

You can

Contact-Free Service: - Order Shipment- Locker or Curbside Pick-up

Fast Service: - Quick Order Turn-Around- Easy Online Ordering

Yes! We’reOPEN

We’re KeepingNorth AmericaWORKING

COUNT on KBC!

COUNT on KBC!

You can

COUNT on KBC!

You can

Yes! We’reOPEN

We’re KeepingNorth AmericaWORKING

COUNT on KBC!

COUNT on KBC!

You can

COUNT on KBC!

You can

Yes! We’reOPEN

We’re KeepingNorth AmericaWORKING

COUNT on KBC!

COUNT on KBC!

You can

COUNT on KBC!

You can

Ensuring Safety: - Scheduled Cleanings - Social Distancing

Yes! We’reOPEN

We’re KeepingNorth AmericaWORKING

COUNT on KBC!

COUNT on KBC!

You can

COUNT on KBC!

You can

of All Orders Ship Same Day* 99% *Excludes Machinery & Non-Stock Items

Sine Bar Not Included.

Part No. 54-440-600Reg. Net Price $110.03

$9353

9" Electronic Level

FEATURES:• Resolution: .05°• Accuracy: ±.2°• Repeatability: ±.05• Measuring Range: 4 x 90°• Dimensions: 9" L x 1" W x 2-1/4" H• Standard 9 volt battery (250 hours of life)• Includes two-way level and plumb vials.• Embedded magnets on the measuring surface, a beam-splitter projects a 90° laser cross hair for leveling at a distance. • Reversible reading for inverted use.• 1/4"-20 mount for tripod use.

FEATURES:• Seamlessly stream music, sports, radio and more from mobile phones, tablets, or any

other Bluetooth® wireless technology enabled device.• Audio assist technology provides setup and operational

guidance without having to remove the headset.• Rotary turning dial allows you to operate your device

from the headset, eliminating cords.• MP3 compatible and enhanced AM/FM digital radio performance for clearer sound.• Vented headband design with removable padding for use with hats.• Safe Volume Control Technology allows for increased volume yet corrects to maintain safe levels over an 8-hour workday.• NRR: 24 dB

WorkTunes™ WirelessHearing Protectorwith Bluetooth® Technology

Part No. 1-720-90542Reg. Net Price $169.18 $14380

Welding Cart

Part No. 1-701-41197Reg. Net Price $169.63

$12499

FEATURES:• Designed to store and transport most MIG and plasma machines,

shielding gas tanks and other welding equipment & accessories.• Front mounted handle for easy maneuverability.• Tilted top shelf allows

access to welder controls. • Side hooks for torch and cable storage.• Durable steel construction.

FEATURES:• Convertible for use on int/ext snap rings.• Individual pliers packaged in a plastic hanger.• Knurled center screw with spring for easy changing and secure hold.• Cushioned grip handles.

12 Pc. Combination Internal/External Snap Ring Plier Set

Model 3495 Plier SetPart No. 1-820-343Reg. Net Price $166.77

$12508

SET INCLUDES:• 6" Straight, Bent 45˚, & Bent 90˚ with .038" tip.• 6" Straight, Bent 45˚, & Bent 90˚ with .047" tip.• 7-1/2" Straight, Bent 45˚, & Bent 90˚ with .070" tip.• 9-1/4" Straight, Bent 45˚, & Bent 90˚ with .090" tip.• Plastic blow molded case.More information @ KBCTools.com

• Additional shelves for storing accessories.

• Front wheel swivel casters.• Heavy duty molded rear wheels.• Top Shelf Dimensions: 11" W x 17-1/2" L.• Overall Cart Dimensions: 32" H x 27.64" L x 17" W.• Includes (2) Safety chains to secure shielding gas tanks.

Instant 4x 90o digitalinclination display!

Major Credit Cards Accepted: 3Subscribe @ KBCTools.com to Get Exclusive Email Offers.

FEATURES:• High-strength fiberglass handle core helps absorb vibrations.• Exterior poly jacket protects handle core from missed strikes.• Double-faced solid rubber head delivers a softened, positive strike.• Made for construction, woodworking, metal forming, and automotive applications.• Soft and comfortable, non-slip rubber grip.

®

16 oz. Fiberglass Handle Rubber Mallet Part No.

1-909-3166

$1170

IndustrialWay Oils

FEATURES:• 5 viscosity grades of lubricant.• Oils are non-corrosive & protect against wear & stick-slip.• For use on machine ways and slideways.

20 WT GradePart No. 1-820-720

Reg. NetPrice $26.20

$2358

30 WT GradePart No. 1-820-730

Reg. NetPrice $26.20

$2358

®

FEATURES:• High-strength fiberglass handle is protected by an impact-resistant poly jacket.• Soft, comfortable rubber grip provides sure, non-slip control.• Sharpened curved claw generates maximum nail-pulling leverage.• Permanent head-to-handle epoxy bond will not loosen over time.

16 oz. JacketedFiberglassClaw Hammer

Part No.1-909-30123

$1600

Exotic metrology - grade rubber self-curing in minutes. Virtually perfect replica casting of internal & external forms. Excellent for checking optical comparators. Non-toxic easy to use 100 times faster than RTV silicones. Norelease agent is ever needed.

Final Color - Light BlueManipulation time: 3 - 4 min. Cure time: 8 - 10 min.

Roll two equal-sized balls of catalyst putty and base putty and simply knead them together like dough. Excellent for external shapes, also cast internal shapes and cavities, but some pressure should be applied such as a weighted object on top.

3/4 Lb. KitPart No. 1-820-16130

Reg. Net Price $365.18

$31040

Quicksetting Putty

MICRO 100 is a space age, micro graincarbide of excellent quality. It is in a classof it’s own, resulting from the exclusivetreating process. Considerably prolongstool life in machining all hard stainlesssteels, efficiently performs in exoticmetals. Provides vastly increased speedand feed rates in cutting aluminum,copper, stainless steels, high temperaturealloys, thermoplastics and compositesused in the aircraft industry.

Micro-Grain carbide +PLUS!

A

B

CL

T

W

T3°

3°

8°10°

Square Nose Tool

Style C Carbide Toolbits

1/4" 1/4" 2" 1/16" 1/4" 1/4" 5/16 5/16 2-1/4 3/32 5/16 3/8 3/8 3/8 2-1/2 3/32 3/8 3/8 7/16 7/16 3 3/32 7/16 1/2 1/2 1/2 3-1/2 1/8 1/2 1/2 5/8 5/8 4 5/32 5/8 5/8 3/4 3/4 4-1/2 3/16 3/4 3/4

-C4-C5-C6-C7-C8-C10-C12

$19.3020.3821.0021.2422.0138.9147.90

Part No. Reg. A B C T W L 1-428- Net Price

TipShankDimensions

$16.4117.3217.8518.0518.7133.0740.72

SALE!

GRADE H01 - Equivalent to K10-K20grade. Recommended cutting speed1,000-2,600 SFM. Excellent foraluminum and other non-ferrous metals.

r

t

d1

I2

I

20°

XEKT Carbide Inserts

Dimensions

XEKT 19M504FR-MA .709" .646" .197" .016" .171" XEKT 19M508FR-MA .709 .646 .197 .031 .171 XEKT 19M516FR-MA .689 .646 .197 .063 .171 XEKT 19M532FR-MA .689 .646 .197 .126 .171

-19043-19083-19163-19323

$40.6540.6540.6540.65

SALE! Insert Part No. Reg. Style l l2 t r d 6-XEK- Net Price

$32.5232.5232.5232.52

r

t

d1

I2

I

20°

HIGH SPEED STEEL

118° POINT

Extra Long Taper Shank Drill

Made to fit Morse tapered holders. Designed to perform in a broad range of materials in the iron and steel families, where extra length is required for hard-to-reach areas.

1-1/2" x 60" OALPart No. 1-071K-132Reg. Net Price $1,139.25

$28481

Leather Welder Gloves

Size: Extra-Large

Part No.1-700-004

$1519

FEATURES:• Insulated.• Fleece lining.• Gauntlet cuff.• Made of gray B grade split shoulder cow leather.• 13" 1 pc. back, self hemmed, and have a full sock lining.

PRO-X Mill IndexableMilling Cutter Kits

KITS INCLUDE:• (1) PRO-X Mill Cutter.• (10) XEKT19M508FR-MA Inserts (Grade H01).• Wrench, Grease, & Literature.

FEATURES:• Good chip flow and less build up edge are achieved through buffed surface of insert.• Strong clamping due to the concave face of insert bottom side.• Specially designed for high speed machining of aluminum.• Suitable for square shouldering and curved surface machining.• High rake angle of insert provides good surface finish and low cutting load.

INDEXABLE END MILLS Cutting Cutting Shank Cutting No. of Part No. Dia. OAL Length Dia. Depth Inserts 1-244-

3/4" 5.12" 2.36" 3/4" .670" 1 1 5.51 2.36 1 .670 2 1-1/4 5.91 2.76 1-1/4 .670 2 1-1/2 6.30 2.76 1-1/2 .670 3

$358.05375.10392.15460.35

-1035-104N-127N-156

ONLY!

INDEXABLE FACE MILLS Cutting Arbor Cutting No. of Part No. Dia. Height Hole Depth Inserts 1-244-

1-1/2" 1-1/2" 1/2" .670" 3 2 1-3/4 3/4 .670 4 3 2 1 .670 5 4 2-1/2 1-1/2 .670 6

$443.30460.35511.50545.60

-153N-2075-307N-407N

ONLY!

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

CUTTING TOOLS

4

RIGHT HANDHIGH SPEED STEELTiN TIPPED118° POINT

Jobbers length drillsare designed to performin a wide variety ofnormal conditions.Jobbers length alsoperform in a broadrange of materialsin both machineand portable drilling.Superhard TITANIUMNITRIDE (TiN) surfacetreatment improves drilllife, chip ejection, andproductivity; decreaseshorsepower requirements.

TiN Coated Jobbers Drills

3/32" 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

2-1/4"2-5/82-3/42-7/83-1/83-1/43-1/23-5/83-3/43-7/844-1/84-1/4 4-3/84-1/24-5/84-3/4 4-7/855-1/8 5-1/45-3/85-1/25-5/85-3/45-7/8 6

$2.202.362.362.552.582.823.153.443.824.154.425.295.456.356.977.788.549.779.90

11.5011.7713.0213.5915.1116.1116.9016.93

-006-007-008-009-010-011-012-013-014-015-016-017-018 -019-020-021-022-023-024-025-026-027-028-029-030-031-032

Part No. Reg. Size OAL 1-001TA- Net Price

$1.761.891.892.042.062.262.522.753.063.323.544.234.365.085.586.226.837.827.929.209.42

10.4210.8712.0912.8913.5213.54

SALE!

FRACTIONAL SIZES

HIGH SPEED STEEL

118° POINT

RIGHT HAND

1/16" to 1/2" by 64ths, No. 1 to No. 60 and A to ZPart No. 1-001-0115Reg. Net Price $112.53

$9002

3-in-1 CombinationJobbers Drill SetDesigned to perform in a wide variety of normal conditionsand in a broad range of materials in both machine and portable drilling.

Jobbers Drills

1/16" 1-7/8" 5/64 2 3/32 2-1/4 7/64 2-5/8 1/8 2-3/4 9/64 2-7/8 5/32 3-1/8 11/64 3-1/4 3/16 3-1/2 13/64 3-5/8 7/32 3-3/4 15/64 3-7/8 1/4 4 17/64 4-1/8 9/32 4-1/4

$2.122.142.142.252.172.412.442.692.983.313.633.964.155.055.21

-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018

Part No. Reg. Size OAL 1-001A- Net Price

Part No. Reg. Size OAL 1-001A- Net Price

$1.701.711.711.801.741.931.952.152.382.652.903.173.324.044.17

SALE! NOW! 19/64" 4-3/8" 5/16 4-1/2 21/64 4-5/8 11/32 4-3/4 23/64 4-7/8 3/8 5 25/64 5-1/8 13/32 5-1/4 27/64 5-3/8 7/16 5-1/2 29/64 5-5/8 15/32 5-3/4 31/64 5-7/8 1/2 6

$6.056.677.438.199.309.47

10.8511.1212.3112.9414.4615.2716.1716.06

-019-020-021-022-023-024-025-026-027-028-029-030-031-032

$4.845.345.946.557.447.588.688.909.85

10.3511.5712.22

12.9´412.85

FRACTIONAL SIZES 118° POINT

HIGH SPEED STEEL RIGHT HAND

JOBBERS LENGTH DRILLS 4011 1 to 6mm by 0.5mm 2026 Drill Index A to Z 2060 Drill Index No. 1 to No. 60

326 A to Z 360 No. 1 to No. 60

-4011

-2026-2060

-0326-0360

$12.40

31.0031.00

46.5075.95

Huot Part No. Reg. No. Description 1-030- Net Price

SCREW MACHINE DRILLS

TAPER LENGTH DRILLS

$6.20

15.5015.50

23.2537.98

SALE!

DrillIndexes

FEATURES:• Folding drill holder.• All-steel index securely holds drills by the shank (except taper shank drills).• Greater accessibility.• High quality epoxy finish.• Silk screened drill identification for easy picking of drills.

JobbersDrill Sets

118° POINT

RIGHT HAND

HIGH SPEED STEEL

Jobbers length drillsare designed to performin a wide variety of normal conditions and in a broad range of materials in both machine and portable drilling.

292660

115

1/16" - 1/2" by 64thsA to Z#1 thru #601/16" - 1/2" by 64ths#1 thru #60 & A to Z

-0290-0260-0600-0115

# Pieces Part No. Reg. In Set Sizes 1-001AX- Net Price

$119.88117.44106.72359.91

SALE!$159.84156.58142.29479.88

Part No. 5-331-3682Reg. Net Price $36.90

$2583

3 Pc. TiN CoatedStep Drill SetFEATURES:• Creates perfectly round holes in metal,

plastic, wood, and other thin materials. • Designed to deburr as you go.• Tip does not slide, absolutely no need for a center punch.• Easily sharpened.

RANGES OF BITS: 1/8-1/2", 3/16-1/2", 1/4-3/4".

6" Silver & Deming Drills

8 Pc. Silver & Deming Drill Set9/16" to 1" by 16thsPart No. 1-060-200Reg. Net Price $111.99

$9519

FEATURES:• Expands the size range capacity of a 1/2"

portable drill chuck.• Common flute and overall length for minimal adjustment during tool changes.• Precision ground for a high degree of concentricity between

shank and body diameter.• Ideal for drilling in low and medium tensile

strength materials.

118° POINT1/2" SHANKHIGH SPEED STEEL

$10.4811.8413.1614.3817.0819.1722.3826.2429.9532.8136.2743.4946.3651.6254.51

-036-040-044-048-056-060-100-104-108-112-116-120-124-128-132

9/16" 5/8 11/16 3/4 7/8 15/1611-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/2

Part No. Reg. Size 1-060- Net Price NOW!

$8.9110.0611.1912.2214.5216.2919.0222.3025.4627.8930.8336.9739.4143.8846.33

Major Credit Cards Accepted: 5Subscribe @ KBCTools.com to Get Exclusive Email Offers.

CUTTING TOOLS

SETS INCLUDE: A selection ofmore frequently used, fractionalsize drills and comes packedneatly in a plastic case.

Solid Carbide Hi-Roc Drill Sets

No. of Part No. Reg. Drills Sizes 5-100- Net Price

5 1/8" to 3/8" by 16ths 7 1/16" to 1/4" by 32nds 10 3/64" to 3/16" by 64ths

$277.10243.15282.45

-20181-20367-20526

$221.68194.52225.96

SALE!

FEATURES:• Produces chips

without generating excessive heat.

• Both a production drill and a salvage or reclaim tool.

• Accurately sized holes are produced without annealing

or softening the workpiece.

• Reamer type finishes are easily produced.

Solid Carbide Hi-Roc Drills

135° POINTFINE GRAIN6% COBALTC-2 GRADE

Designed to drill hardened steelin the 42-65 Rockwell "C" range.

Flute Part No. Reg. Size Dia. Length OAL 5-100- Net Price

$25.5522.5522.5522.5522.5526.4527.2529.2033.9936.2939.3342.0444.1945.9554.9059.4063.1566.1368.6577.4180.2982.9585.28

-20004-20067-20100-20130-20163-20199-20229-20253-20283-20313-20340-20376-20403-20427-20451-20472-20499-20520-20541-20562-20583-20604-20622

1/32" .0312" 3/16" 1-1/2" 3/64 .0469 1/4 1-1/2 1/16 .0625 5/16 1-1/2 5/64 .0781 3/8 1-1/2 3/32 .0938 1/2 1-1/2 7/64 .1094 5/8 1-1/2 1/8 .1250 5/8 1-1/2 9/64 .1406 5/8 2 5/32 .1562 5/8 2 11/64 .1719 5/8 2 3/16 .1875 5/8 2 13/64 .2031 3/4 2 7/32 .2187 3/4 2 15/64 .2344 3/4 2 1/4 .2500 3/4 2 17/64 .2656 3/4 2-1/2 9/32 .2812 3/4 2-1/2 19/64 .2969 3/4 2-1/2 5/16 .3125 3/4 2-1/2 21/64 .3281 1 2-1/2 11/32 .3438 1 2-1/2 23/64 .3594 1 2-1/2 3/8 .3750 1 2-1/2

$20.4418.0418.0418.0418.0421.1621.8023.3627.1929.0331.4633.6335.3536.7643.9247.5250.5252.9054.9261.9364.2366.3668.22

NOW!

Series 200

Plain type, solid carbide,60° combined drills andcountersinks with straightflutes. Used for producingcenter holes in componentsor workpieces which requiremachining between centers.

Solid Carbide Combined Drills & Countersinks

1 1/8" 3/64" 2 3/16 5/64 3 1/4 7/64 4 5/16 1/8 5 7/16 3/16 6 1/2 7/32

$14.2318.6023.2532.5548.0565.10

-001-002-003-004-005-006

Body Drill Part No. Reg. Size Dia. Dia. 1-049- Net Price

$11.3814.8818.6026.0438.4452.08

SALE!60° INCLUDED ANGLE

FINE GRAIN 6% COBALT C-2 GRADE

8 Pc. Solid CarbideBurr Kit with 1/4" Shanks

Supplied in a wood box.

KIT INCLUDES (1 Ea.):• SD1 Ball - 1/4"• SE1 Oval - 1/4" x 3/8"• SM1 Cone - 1/4" x 1/2"• SN1 Inverted - 1/4" x 5/16"• SA1 Cylindrical - 1/4" x 5/8"• SC1 Radial End - 1/4" x 5/8"• SF1 Tree, Radius End - 1/4" x 5/8"• SG1 Tree, Pointed End - 1/4" x 5/8"

Standard Plain Cut: General purpose cut, where stock removal rates & finish requirements are average. Performs best on soft ferrous materials.

Part No. 1-338-000Reg. Net Price $123.85

$9908

SIZES INCLUDED: 5/16", 3/8", 1/2", 5/8"

4 Pc. ZErO FluteM35 Cobalt Countersinks& Deburring Tool Set

FEATURES:• M35 cobalt; 6% tungsten, 5% moly, 5% cobalt - for long life in all types of materials.• Through-hole design that is easy to resharpen using a small grinding wheel in the cross-hole.• Simple all-purpose versatility that provides flawless countersinking and deburring.• Chamfer diameters ranging from 7/64" to 1-1/32".• Free cutting action. Minimal power needed. Use by hand or machine feed.• Works on all materials. Excels on aluminum, plastics, and other nonmetallics.• Micro-smooth CNC precision ground for clean smooth cutting without smearing.

82O ANGLE STRAIGHT SHANKCNC PRECISION CHATTERLESSCAM GROUND CUTTING ACTION

Supplied ina plastic case.

Part No. 1-159A-53518Reg. Net Price $117.99

$10029

No. 10Standard Keyway Broach Set - 1/8" to 3/8"

Part No. 1-409-11104Reg. Net Price $668.98

$56863

Keyway Broach Bushing Dia. Sizes Style (Hole Size)

1/8" B 1/2", 5/8", 3/4", 7/8" 3/16 B 1/4 C 1", 1-1/8", 1-1/4", 3/8 C 1-3/8", 1-1/2"

HIGHSPEED STEEL

5 Pc. Single FluteCountersink SetFEATURES:• Recommended for portable & machine work when operated at comparatively high speed.• Countersink holes much smaller than multi-flute tools.

SET INCLUDES:• 1/4", 3/8" 1/2" with 1/4" shank.• 3/4", 1" with 1/2" shank.

Part No. 5-380-5895Reg. Net Price $58.75

$4700

Supplied in a wood block.

82O ANGLE

6-Flute Double End Countersinks

Two cuttingends giveyou twicethe tool lifeof a singleend tool.

1/8"3/161/4

5/163/81/2

Body Part No. Part No. Part No. Reg. Dia. OAL 1-1646H- 1-1646H- 1-1646H- Net Price

60° 82° 90°

1-1/2"222-1/22-1/23

-60008-60012-60016-60020-60024-60032

-82008-82012-82016-82020-82024-82032

-90008-90012-90016-90020-90024-90032

$24.3024.8525.8029.9033.3041.80

$21.8722.3723.2226.9129.9737.62

NOW!

HIGHSPEED STEEL

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

CUTTING TOOLS

6

Standard Length TiN Coated Solid Carbide Single End MillsDesigned for general milling operations. Spiral multi-flute design permits a fasterand smoother cutting action.

2 FLUTE

3 FLUTE

$13.6413.6415.3519.3825.7331.0046.5051.15

$8.839.22

14.0817.7921.6327.6742.6943.48

$11.5911.5913.0516.4721.8726.3539.5343.48

-004-008-012-016-020-024-028-032

$10.3910.8516.5720.9325.4532.5550.2251.15

$8.839.22

14.0817.7921.6327.6742.6943.48

-004-008-012-016-020-024-028-032

Flute Shank Flute Part No. Reg. Part No. Reg. Part No. Reg. Dia. Dia. Length OAL 1-325C- Net Price 1-330C- Net Price 1-326C- Net Price

2 Flute

1/16" 1/8" 3/16" 1-1/2" 1/8 1/8 1/2 1-1/2 3/16 3/16 5/8 2 1/4 1/4 3/4 2-1/2 5/16 5/16 7/8 2-1/2 3/8 3/8 7/8 2-1/2 7/16 7/16 1 2-1/2 1/2 1/2 1 3

$10.3910.8516.5720.9325.4532.5550.2251.15

-004-008-012-016-020-024-028-032

NOW! NOW! NOW!

3 Flute 4 Flute

MICROSHIELD™ TiN - TITANIUM NITRIDE:A general purpose coating for Solid Carbide, HSS and HSCO end mills that provides effective protection against wear, abrasion and edge buildup. Primary applicationsare milling steels in a non-hardened condition.

HIGH SPEED STEEL

4 FluteMiniatureDoubleEnd MillWith 3/16" Shank

Designed for general purposemilling operations. SPECIAL BUY!

Quantities Limited.

Part No. 5-265-010Reg. Net Price $12.05

$301

SPECIFICATIONS:• Mill Diameter: 1/8"• Flute Length: 3/8"• OAL: 2-1/4"

8 Pc. AdjustableHand ReamerSet

HIGH SPEED STEELSupplied in a

fitted wood case.

FEATURES:• Reamers are used for light cut, repair work, removing stock, or for enlarging holes.• Can be hand operated by use of wrenches.• Each reamer adjusts from a smaller size to a larger size.

15/32" to 1-1/16"Part No.1-135-800Reg. NetPrice $201.81

$12109

29 Pc. Chucking Reamer Set

FEATURES:• Designed for use in turret lathes, screw machines, drill presses and all types of machine tool equipment.• Ground with a 45O chamfer they are suitable for reaming most materials ordinarily encountered.

1/16" to 1/2" by 64thsDiameter Tolerances: +.0002" -.0000"

Part No. 5-015-375Reg. Net Price $415.26

$35297

FRACTIONAL SIZES M-2 HIGH SPEED STEELSTRAIGHT SHANK STRAIGHT FLUTE

SAVEup to

SAVEoverover

SAVE

$60

RADIUS

WORKPIECE

ENDDIAMETER

CUTTERDIAMETER

Corner Rounding End Mills

HIGH SPEED STEEL

Relieved form can be resharpened many times without changing forms. Used in milling rounded corners. FRACTIONAL RADIUS

$97.93107.20121.40121.40135.38135.38165.93165.93188.85188.85208.34208.34221.22221.22

1/8" 1/2" 5/8" 1/4" 3" 4 5/32 1/2 1/2 5/16 3 4 3/16 1/2 3/4 3/8 2-15/16 4 3/16 3/4 7/8 3/8 3-1/8 4 1/4 1/2 1 3/8 3 4 1/4 3/4 1 3/8 3-1/4 4 5/16 1/2 1-1/8 3/8 3-1/4 4 5/16 7/8 1-1/8 3/8 3-1/2 4 3/8 1/2 1-1/4 3/8 3-1/2 4 3/8 7/8 1-1/4 3/8 3-3/4 4 7/16 3/4 1-3/8 3/8 3-3/4 4 7/16 1 1-1/2 3/8 4 4 1/2 3/4 1-1/2 3/8 3-7/8 4 1/2 1 1-1/2 3/8 4-1/8 4

Shank Cutter End No. of Part No. Reg. Radius Dia. Dia. Diameter OAL Teeth 5-550A- Net Price

-14220-14230-14240-14250-14260-14270-14280-14290-14300-14310-14320-14330-14340-14350

$83.2491.12

103.19103.19115.07115.07141.04141.04160.52160.52177.09177.09188.04188.04

SALE!

Solid Carbide Reamers4 FluteBelow 1/4" Dia.,6 FluteOn Larger Sizes

For general purpose reaming applications in ferrous metalsand most non-ferrous materials. Precision ground with straightflutes for making smooth, accurate holes while retaining long tool life.

STRAIGHT SHANK STRAIGHT FLUTE

Decimal. Flute Part No. Reg. Size Equiv. Length OAL 5-661- Net Price

1/16" .0625" 3/8" 1/8 .1250 5/8 3/16 .1875 7/8 1/4 .2500 1 5/16 .3125 1-1/8 3/8 .3750 1-1/4 7/16 .4375 1-3/8 1/2 .5000 1-3/8

$17.9024.3432.7143.5658.5970.2991.30

114.00

-018-044-066-087-100-111-117-121

1-1/2"2-1/42-3/433-1/43-1/23-3/44

$15.2220.6927.8037.0349.8059.7577.6196.90

SALE!

Hex Shank Taper Car Reamers

Taper Car Reamers have the same features as bridge reamers except for shorter flute and overall length facilitating their use in tight quarters. Hex Nut welded to shank for ready use in pneumatic power tools.

SPIRAL FLUTEHIGH SPEEDSTEEL

$92.54101.22115.86140.90

Flute Part No. Reg. Size Length 5-056X- Net Price

11/16" 5" 13/16 5 15/16 5 1-1/16 5

-051-052-060-104

$64.7870.8581.1098.63

SALE!

Major Credit Cards Accepted: 7Subscribe @ KBCTools.com to Get Exclusive Email Offers.

CUTTING TOOLS

Spiral Pointed Hand Taps

FEATURES:• Commonly referred to as "gun" taps.• Excellent production tapping of through holes.• Flute design forces the evacuation of chips ahead of the cutting action.

HIGH SPEED STEELPLUG STYLEGROUND THREADRIGHT HAND

MACHINE SCREW SIZES GH No. of Part No. Reg. Size Limit Flutes 1-351- Net Price

$12.7510.71 10.71 10.71 10.71

4-40 NC H2 2 6-32 NC H3 2 8-32 NC H3 2 10-24 NC H3 2 10-32 NF H3 2

-1010805-1012361-1012370-1012378-1012383

SALE!$10.84

9.10 9.10 9.10 9.10

GH No. of Part No. Reg. Size Limit Flutes 1-351- Net Price

FRACTIONAL SIZES

$10.6610.71 11.53 11.53 13.56 14.62 23.68 27.64 53.22 53.22 74.87

1/4-20 NC H3 2 1/4-28 NF H3 2 5/16-18 NC H3 2 5/16-24 NF H3 2 3/8-16 NC H3 3 3/8-24 NF H3 3 1/2-13 NC H3 3 1/2-20 NF H3 3 5/8-11 NC H3 3 5/8-18 NF H3 3 3/4-10 NC H3 3

-1010292-1010299-1010306-1010313-1010320-1010324-1010336-1010340-1010342-1012774-1010344

SALE!$9.06

9.10 9.80 9.80

11.53 12.43 20.13 23.49 45.24 45.24 63.64

GROUND THREADGH LIMIT - H3HIGH SPEEDSTEELRIGHT HAND

4 Flute Plug Hand Taps

FEATURES:• General purpose taps.• Widely used in through holes and where there is sufficient

room at the bottom in blind holes.• Most common style of hand taps.

1/4-20 NC 1/4-28 NF 5/16-18 NC 5/16-24 NF 3/8-16 NC 3/8-24 NF 1/2-13 NC 1/2-20 NF 5/8-11 NC 5/8-18 NF 3/4-10 NC 3/4-16 NF

FRACTIONAL SIZES

$9.289.28

11.28 11.28 12.83 12.83 22.9226.3746.7146.7165.9165.91

Part No. Reg. Size 1-351- Net Price

-1010006-1010017-1010028-1010039-1010050-1010061-1010088-1010097-1010121-1010128-1010142-1010149

NOW!$7.89

7.899.59 9.59

10.91 10.91 19.4822.4139.7039.7056.0256.02

E-Z LOK thread inserts are an easy way to replace or prevent worn threads. They install with standard tools... no special drills or taps needed. Simply drill the hole with a standard drill, tap the hole with a standardtap, then turn in the EZ-LOK with screwdriver or bolt/nut. A preapplied anaerobic adhesive on external threads locks the inserts in place.

FEATURES:• Install with standard tools.• Self locking.• Carbon steel designs.• Registered to ISO 9001:2000.

Thread Inserts

INCH REPAIR KITS

$116.40

123.74

112.97

Reg. Qty. of Internal External Part No. Net Price Desc. Inserts Thread Thread 1-842- Per Kit

Coarse 10 10-24 3/8-16 Thread 10 1/4-20 7/16-14 No.10 10 5/16-18 1/2-13 to 1/2" 10 3/8-16 9/16-12 6 1/2-13 3/4-10 Coarse 6 1/2-13 3/4-10 Thread 7 5/8-11 7/8-9 1/2" 7 3/4-10 1-8 to 1" 2 1-8 1-3/8-12 10 10-32 3/8-16 Fine 10 1/4-28 7/16-14 Thread 10 5/16-24 1/2-13 No. 10 10 3/8-24 9/16-12 to 1/2" 6 1/2-20 3/4-10

-023

-024

-025

$136.94

145.58

132.91

SALE!

$116.40

160.21

183.27

METRIC REPAIR KITS Reg. Qty. of Internal External Part No. Net Price Desc. Inserts Thread Thread 1-842- Per Kit

Metric 10 M6-1.0 3/8-16 Thread 10 M8-1.25 1/2-13 M6 10 M10-1.5 9/16-12 to M12 6 M12-1.75 3/4-10 10 M3-0.5 M6-1.0 M3-0.5 10 M4-0.7 M8-1.25 to 10 M5-0.8 M8-1.25 M8-1.25 10 M6-1.0 M10-1.5 10 M8-1.25 M12-1.75 10 M8-1.25 M12-1.75 M8-1.25 10 M10-1.5 M16-2.0 to 8 M12-1.75 M16-2.0 M16-2.0 5 M16-2.0 M24-3.0

-041

-042

-043

$136.94

188.48

215.61

SALE!

Part No. Reg. Size 5-530- Net Price

1/2" 9/16 5/8 11/16 3/4 13/16 7/8 15/1611-1/161-1/81-3/161-1/4

-111-113-116-119-121-124-127-130-133-136-139-142-145

$46.6046.6046.6046.6049.6254.7255.6558.9662.5566.1672.1875.1776.67

$39.6139.6139.6139.6142.1846.5147.3050.1253.1756.2461.3563.8965.17

NOW! Part No. Reg. Size 5-530- Net Price

1-5/16" 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2

-148-151-154-157-160-163-166-169-172-175-178-181

$84.2193.21

102.24111.26117.28120.29135.32138.34156.38156.38162.39174.40

$71.5879.2386.9094.5799.69

102.25115.02117.59132.92132.92138.03148.24

NOW!

Annular Cutters

FEATURES:• Eliminates multi-step drilling.• More accurate & clear holes.• Better finishing.

HIGH SPEED STEELSHORT SERIES (1" DEPTH)3/4" SHANK

FEATURES:• Allows cutting through a depth of 2". • Exceptionally strong, safe, and shatter resistant. • Cuts a wide variety of materials including wood, metal, and steel. • Manufactured with hardened heat resistant and positive rake high

speed steel teeth welded to a durable alloy backing and cap.

13 Pc. Deep Cut Bi-Metal General Purpose Hole Saw Kit

Starrett #KDC09051-NPart No. 1-856-01218Reg. Net Price $169.79

$14432

KIT INCLUDES: • DCH Series Hole Saws - 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2".• A1E Extended Length Arbor.• A2E Extended Length Quick Hitch Arbor.• A014CE Extra-Length HSS Pilot Drill.• A12 Arbor Adapter.

Style AL & ARCarbide Tipped Toolbits

Designed for turning, boringor facing to a square shoulder.Maximum regrinds are possiblefor light cutting where the maximumwear occurs at or near the front face of the tool.

STRAIGHT TURNING TOOLS

GRADE C-5

Shank Dimensions Left Hand Right Hand Nose Part No. Reg. Part No. Reg. Square Length Radius 1-2445- Net Price 1-2445- Net Price SALE! SALE! 1/4" 2" 5/16 2-1/4 3/8 2-1/2 7/16 3 1/2 3-1/2 5/8 4

$5.866.586.867.179.18

13.06

$5.866.586.867.179.18

13.06

-AL4-AL5-AL6-AL7-AL8-AL10

-AR4-AR5-AR6-AR7-AR8-AR10

1/64"1/641/641/321/321/32

$7.338.228.578.96

11.4716.32

$7.338.228.578.96

11.4716.32

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

CARBIDE TOOLING

8

Internal Toolholders

PLEASE NOTE THAT ALL INTERNAL BARS USE OPPOSITE HAND INSERTS.EXAMPLE: RIGHT HAND BARS USE LEFT HAND INSERTS AND LEFT HAND BARS USE RIGHT HAND INSERTS.

A10-FLER/L2 5/8" 10" 1.000 FL-2 A12-FLER/L2 3/4 10 1.125 FL-2 A16-FLER/L3 1 12 1.375 FL-3 A20-FLER/L3 1-1/4 14 1.750 FL-3 A28-FLER/L4 1-3/4 16 2.250 FL-4

-007R-008R-009R-010R-011R

Industry Min. Part No. Reg. Ref. No. Shank OAL Bore Insert 1-294- Net Price

$194.66236.67308.72328.69424.72

$216.29262.97343.02365.21471.91

NOW!

INCLUDESCOOLANT PORT.

GRADE TG-320 - Excellent coated grade for generalpurpose cuts in steel & steel alloys. Equivalent to P10-P30 grade. Recommended cutting speed 500-1,000 SFM.

ASA Insert Hole Corner Part No. Reg. Code IC Size Dia. Thickness Radius 1-2443- Net Price

CCMT-21.51 1/4" .110" 3/32" 1/64" CCMT-32.51 3/8 .173 5/32 1/64 CCMT-32.52 3/8 .173 5/32 1/32 CCMT-431 1/2 .216 3/16 1/64 CCMT-432 1/2 .216 3/16 1/32

-931-932-933-934-923

$14.3514.8014.8019.5519.55

$10.7611.1011.1014.6614.66

SALE!

CCMT CarbideInserts

80o DIAMOND

FEATURES:• Single sided.• Screw on insert.• Standard chip control.• Use for medium cuts.

• Depth of Cut: 3/64" ~ 1/8".• Feed Rate: .004" ~ .012"/rev.• 7° relief angle.

External Right HandThreading Inserts 60o PARTIAL

PROFILE(NON-TOPPING)

The "Partial Profile" inserts cutwithout "Topping" the O.D. of the thread.The same insert can be used for a rangeof different thread pitches.

VKX - TiN coated carbide grade.Excellent for stainless steel & cast iron.VSX - All purpose carbide grade.Coated for extra tool life.Able to withstand difficult cutting conditions.

Part No. Reg. Part No. Reg. I.C. TPI MM 1-2892- Net Price 1-2892- Net Price

VKX Grade VSX Grade

-510-VKX-515-VKX-520-VKX

3/8A 16 - 48 0.5 - 1.5 3/8G 8 - 14 1.75 - 3.0 3/8AG 8 - 48 0.5 - 3.0

$29.9329.9329.93

$25.4425.4425.44

-510-VSX-515-VSX-520-VSX

$29.9329.9329.93

$25.4425.4425.44

SALE! NOW!

Pitch Range

B

L1

L2

F

H1

2o

H

B

L1

L2

F

H1

2o

H

RIGHT HAND SHOWN

$99.80108.83108.83108.83114.31127.01

AL 3/8-3 .37" .63" 2.5" .81" AL 050-3 3/8" .50 .63 3.5 .87 AL 0625-3 .63 .63 5.0 1.02 AL 075-3 .75 .75 5.0 1.02 AL 100-3 3/8" 1.00 1.00 6.0 1.02 AL 125-3 1.25 1.25 7.0 1.18

$117.41128.03128.03128.03134.48149.42

-085-005-006-010-015-020

Insert Size H, H1 Part No. Reg. Model No. (I.C.) B F L1 L2 1-289R- Net Price SALE!

All toolholders are supplied with 1-1/2° helix-angle.Supplied with anvil.

External ThreadingToolholders

FEATURES:• Indexable inserts for turning application in ISO P.• For general mechanical engineering, single-part production and other industries.• Economic machining with proven technology.• Extremely reliable and wear-resistant.• Simple geometry selection and wear detection.• Flexible use in a wide range of applications.

Perform LineTurning Inserts

Buy In Package Quantity: 10 Per Pack.RECOMMENDED APPLICATIONS

For non-alloyed steel, low-alloyed steel, high-alloyed steel and tool steel,and stainless steel. Harder application range 10. Cutting Speed: 260-1,120 SFM.For non-alloyed steel, low-alloyed steel, high-alloyed steel and tool steel,and stainless steel. Tougher application range 20. Cutting Speed: 230-920 SFM.

Grade Use

WPV10

WPV20

MADE IN GERMANY

Reg. ANSI Insert Hole Corner Part No. Part No. Net Price Code IC Size Dia. Thickness Radius 1-247- 1-246- Each

CCMT21.51-FV4 1/4" .110" 3/32" 1/64" CCMT32.51-FV4 3/8 .173 5/32 1/64 CCMT32.52-FV4 3/8 .173 5/32 1/32 CCMT21.51-MV4 1/4 .110 3/32 1/64 CCMT32.51-MV4 3/8 .173 5/32 1/64 CCMT32.52-MV4 3/8 .173 5/32 1/32 CCMT432-MV4 1/2 .203 3/16 1/32 CNMG431-FV5 1/2 .203 3/16 1/64 CNMG432-FV5 1/2 .203 3/16 1/32 CNMG431-MV5 1/2 .203 3/16 1/64 CNMG432-MV5 1/2 .203 3/16 1/32 CNMG433-MV5 1/2 .203 3/16 3/64 CNMG543-MV5 5/8 .253 1/4 3/64 CNMG431-RV5 1/2 .203 3/16 1/64 CNMG432-RV5 1/2 .203 3/16 1/32 CNMG433-RV5 1/2 .203 3/16 3/64 CNMG543-RV5 5/8 .253 1/4 3/64TCMT21.51-MV4 1/4 .110 3/32 1/64TCMT32.51-MV4 3/8 .173 5/32 1/64TCMT32.52-MV4 3/8 .173 5/32 1/32TNMG331-MV5 3/8 .150 3/16 1/64TNMG332-MV5 3/8 .150 3/16 1/32TNMG331-FV5 3/8 .150 3/16 1/64TNMG332-FV5 3/8 .150 3/16 1/32TNMG332-RV5 3/8 .150 3/16 1/32

$9.7311.3511.35

9.7311.3511.3516.2413.3013.3013.3013.3013.3021.2013.3013.3021.2021.2010.7614.0114.0111.7211.7211.7211.7211.72

Grade WPV10 Grade WPV20

SALE!CCMT80° DIAMOND

TCMTTRIANGULAR

CNMG80° DIAMOND

TCMGTRIANGULAR

CHIPBREAKERS

• For roughing of steel materials and ductile cast iron.

• Medium machining of a wide range of applications.• Universal geometry for cast iron workpieces.

• For finishing or semi-finishing of steel materials.

Negative Basic Inserts

Positive Basic Inserts

MV4

FV5

FV4

MV5

RV5

• Medium machining of long-chipped materials.• Can be used in a wide range of applications.

• Universal finishing insert with excellent chip control.• Can also be used for fine boring.

• Single-sided positive basic shape.• Feed/Chip Breaking Range: 4.

• Double-sided negative basic shape.• Feed/Chip Breaking Range: 5.

$7.308.518.517.308.518.51

12.189.989.989.989.989.98

15.909.989.98

15.9015.90

8.0710.5110.51

8.798.798.798.798.79

-058-059-060-061-062-063-064-001-002-003-004-005-006-013-014-015-016-071-072-073-040-041-038-039-044

-058-059-060-061-062-063-064-001-002-003-004-005-006-013-014-015-016-071-072-073-040-041-038-039-044

Major Credit Cards Accepted: 9Subscribe @ KBCTools.com to Get Exclusive Email Offers.

CARBIDE TOOLING

H1 HMTJNR/L

MTJNR/L B

LE

F

93˚

Right Hand Shown, Left Hand Opposite

For use withTNMG

Style Inserts

FEATURES:• For use with 60° triangular negative

clearance TNMG inserts.• 3° side cutting edge angle.

RIGHT HAND SHOWN LEFT HAND OPPOSITE

MTJNR Indexable Toolholders

TNMG Tool Width Height Length Insert Part No. Reg. Style B H L F Series 6-740R- Net Price

MTJNR 10-3BMTJNR 12-3BMTJNR 16-3DMTJNR 16-4DMTJNR 20-4DMTJNR 16-5DMTJNR 20-5DMTJNR 24-5DMTJNR 24-5EMTJNR 85-3E

-010-012-016-116-120-216-220-224-226-235

5/8" 3/4111-1/411-1/41-1/21-1/21

5/8" 3/4111-1/411-1/41-1/21-1/21-1/2

4-1/2"4-1/266666677

33

43

54

.675"11-1/41-1/41-1/41-1/41-1/2221-1/4

$107.32119.91130.01132.83145.35140.92150.33192.76219.08149.03

$91.22101.92110.51112.91123.55119.78127.78163.85186.22126.68

SALE!

SUPER SHEAR INSERTS

SS-45LSS-032SS-312

OctagonSquareRound

-035-040-045

$22.4822.4822.48

Insert Part No. Reg. Part No. Reg. No. Shape 1-2655- Net Price 1-2658- Net Price

Uncoated (MTC-20)

-035-040-045

$24.0324.0324.03

SALE!

Coated (MTC-322)

SALE!$20.23

20.2320.23

$21.6321.6321.63

Freedom Cutter®

Inserts

GRADE SELECTIONS:

MTC-20MTC-322

UncoatedTiB2

Up SharpEdge Prep

AluminumAluminum

Cutting MTC No. Coating Edge Application

NPNegative / PositiveFrustroconical LandSmoothGrind®

PSPower ShearMedium DishSmoothGrind®

SSSuper ShearHigh DishSmoothGrind®

The Mil-Tec Freedom Cutter® is perfect for every shop.The combination of flexibility and performance offersusers a low cost milling solution without sacrificing quality.

FEATURES:• Positive geometry for free cutting.• Separate geometry for aluminum and steel.

Freedom Cutter®

Indexable Shell Mills

KITS FOR ALUMINUM APPLICATIONS(INCLUDES SS45L-MTC322 INSERTS)

Include Part No. Reg. Kit No. Tool No. 1-265- Net Price

KTFC-2-4SSKTFC-3-5SSKTFC-4-6SS

FC-2-4FC-3-5FC-4-6

-035A-040A-045A

$471.51634.73770.04

$523.90705.25855.60

SALE!KITS INCLUDE: • (1) Mil-Tec Freedom Cutter Body• (10) Inserts• (2) Wrenches • Extra Screws• Anti-Seize Lubricant

# of Tool No. Dia. Bore Height Inserts

FC-2-4 2" 0.75" 1.750" 4 FC-3-5 3 1.25 1.875 5 FC-4-6 4 1.50 1.875 6

TOOL DIMENSIONS:

Fits three different shapesof inserts. Square, Round,and Octagon, all in one body!

After the cutting edges are used on your turningtoolholder, do not throw the insert away. It can beused in this milling cutter to utilize two more cuttingedges that were not used in your lathe work.

FEATURES:• Recycles negative inserts, 80° diamond.• Index insert with four cutting edges.• High rate of material removal.• Torx screw (TS-1032-5M1) locking system.• Number of Inserts: 3.• Insert: CNMG-432.• Torx Key: T-20.

Indexable 2" Diameter Recyclable 15° Face Mill

$344.67344.67434.90

Part No. Reg. Tool Number C D D1 d F H 1-286A- Net Price

REC15-200-CN4-075 3-1/4" 2" 2-1/4" 3/4" .45" 1-1/2"REC15-200-CN4-100 4 2 2-1/4 1 .45 1-1/2REC15-200-CN4-R8 5-5/8 2 2-1/4 R8 .45 1-3/4

-080-085-090

$292.97292.97369.67

NOW!

CUTTING RAKE - NEGATIVE 7°:For negative 80° diamond CNMG inserts.

TOOL ANGLES:Cutting Rake 7°Axial Rake 7°Radial Rake 7°

SI-CTUP RIndexable Boring Bars

For use withTPU

Style Inserts

FEATURES:• Positive 3O end cutting edge angle. • For use with triangle TPU inserts.• Right hand.

L

D d

90o

A

A

E

F

Shank Min. OAL Part No. Reg. Size Bore L E Inserts 6-939- Net Price

5/8" 3/41

0.827"1.0631.339

8-1/4" 9-7/8 11-3/4

1.181"1.3781.575

TPU-21

TPU-32

-172-173-174

$127.03133.78146.29

$107.98113.71124.35

SALE!

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

WORK HOLDING

10

Straight Shank Double AngleCollet Chucks

Shank Shank Head Collet Dia. Length Length Part No. Reg. Size (A) (B) (C) 1-543- Net Price DA100 1" 5-1/2" 1-13/16" DA180 1-1/4 5-17/32 1-3/4 DA200 3/4 5-1/2 1-5/8 DA300 1/2 5-1/2 1-5/16

$168.95199.95161.20142.60

-76545-76547-76543-76541

SALE!$152.06

179.96145.08128.34

A

B C

R8 Shank Drill Chuck Arbors

PRECISION GROUND

JACOBS TAPER Chuck Part No. Reg. Taper Taper 1-507- Net Price

$26.7526.7526.7526.7526.75

R8 2JT R8 3JT R8 4JT R8 6JT R8 33JT

-080-135-185-255-305

SALE!$24.08

24.0824.0824.0824.08

Specially designed for extra heavy-duty drilling applications on production drilling machines, jig bore, milling machines, lathes and radials. The ideal choice for those jobs that require close tolerance drilling. The ball thrust bearing reduces friction in the chuck’s closing mechanism, so the operator can apply more gripping power on the twist drill shank.

Heavy-Duty Ball Bearing Chucks

11N 0 - 3/8" 2JT K32 14N 0 - 1/2 3JT K3 16N 1/8 - 5/8 3JT K4

Chuck Chuck Uses Part No. Reg. Model Capacity Mount Key 1-508- Net Price

$307.28306.42493.09

$230.46229.82369.82

-30215-30221-30227

SALE!

The Jacobs® Plain Bearing chuck is the world’s most widely usedfor medium or heavy duty portable bench or floor mounted power tools.This industrial quality chuck, with fully hardened and ground working components, offers exceptionally high accuracy, gripping power anddurability. Both heavy and medium duty models are available in a widerange of capacities for use on threaded and taper mounted spindles.

Plain BearingKey-Type Chucks

* Equipped with Thread Locking Collar 1-1/16 - 20 Thread.

Chuck Chuck Uses Sleeve Part No. Reg. Model Mount Key Finish 1-508- Net Price

34-02 2JT K3 Fluted 34-06 6JT K3 Fluted 34-33 33JT K3 Fluted 34-33C* 33JT K3 Smooth

$185.19245.90209.32193.42

-14442-6295-14445-14451

0 - 1/2" CAPACITY

SALE!$157.41

209.02177.92164.41

6" x 12" Permanent Rectangular Magnetic Chucks Economy Grade

FEATURES:• Standard pole type.• Positive hand release.• Magnetic Pull - 88lbs/40kg.• Solid top and bottom plates assure retained accuracy.• Approx. Weight: 33 lbs.

Part No.9-600-612Reg. NetPrice $550.45

$41284

Button Type MagnetsSmall but powerful magnetswith almost unlimited applications. Has a center hole for easy fastening. With keeper.

®

Pull Part No. Reg. Diameter Height (lbs.) 1-805- Net Price

1-1/2 4 6-1/41418-1/2

1/2" 3/4 1 1-1/4 1-1/2

$6.829.77

12.7930.1542.78

3/8"1/25/83/47/8

-372A-372B-372C-372D-372E

SALE!$5.80

8.3010.8725.6336.36

Chuck Keys

Make your power tools useful again! Stock up on misplaced keys with these economy replacements!

Jacobs Equivalent Part No. Key No. 1-507-

K1 K2 K3 K4

-002-003-006-007

NOW!$2.40

3.754.05

12.56

Supra Quick ActionBall Bearing Drill Chucks

MADE IN GERMANY

KEYLESS Size Taper Part No. Reg. Capacity Mount 1-507- Net Price

$148.80140.43201.50199.95230.95

0-3/8 2JT0-3/8 33JT1/32-1/2 6JT1/32-1/2 33JT1/8-5/8 6JT

-020097-020101-020113-020109-020121

$133.92126.39181.35179.96207.86

SALE!

FEATURES:• All metal construction for extended life.• Jaws and bodies are hardened & ground.

• Rapid clamping and releasing of the drilling tools, without use of a wrench.• Heavy industrial version for stationary drilling

machines and lightweight version mainly for hand operated drilling machines.

Self-tighteningfor higher clamping torque. Highpercussion design.

Major Credit Cards Accepted: 11Subscribe @ KBCTools.com to Get Exclusive Email Offers.

WORK HOLDING

43 Pc. CAT 40 V-Flange Tooling Package

4 CAT 40, ER 32 x 2.76" Collet Chuck 2 CAT 40, ER 16 x 2.76" Collet Chuck 1 10 pc. ER 16 - Inch Collet Set 1 18 pc. ER 32 - Inch Collet Set 1 CAT 40, 1/4" x 3" End Mill Holder 1 CAT 40, 3/8" x 3" End Mill Holder 1 CAT 40, 1/2" x 3" End Mill Holder 1 CAT 40, 5/8" x 3" End Mill Holder 1 CAT 40, 3/4" x 3-1/2" End Mill Holder 1 CAT 40, 1" x 4" End Mill Holder 1 CAT 40, 1/2" x 4" Drill Chuck 1 ER 16 - Wrench 1 ER 32 - Wrench

SET INCLUDES: Qty. Description

ER COLLETCHUCK FEATURES:• Factory balanced to 25,000 RPM.• Collet precision .0002" .• Power coat nut holds up to 75%

tighter than standard nuts to extend cutting tool life.

END MILLHOLDER FEATURES:• Manufactured to H5 tolerance.• Lab tested and lab certified.• Factory balanced to 10,000 RPM.

Model No.TP-C40Part No.7-520-TPC40 Reg. Net Price$2,997.70

$2,39816

3-Jaw Universal Iron Body Chucks

MEDIUM DUTYVALUE LINEFEATURES:

• Maximum .003" TIR using nominating pinion.• .001" repeatability using nominating pinion.• Hardened scroll.• Three hardened pinions.• Semi-steel bodies.

PLAIN BACKwith Two Piece Reversible Jaws

Chuck Weight Part No. Reg. Dia. (lbs.) 1-495- Net Price

$503.75658.75813.75

6" 25 8 34 10 55

-0600-0800-1000

$428.19559.94691.69

SALE!

High Value & Lower Cost!

Series 342

1 Year Warranty!

This ER collet chuck fits CNC lathes and can also be usefor tapping applications. It seals coolant from the turret tothe shank with an o-ring on the end of the shank.

CNC Lathe ER-32 Collet Chucks

FEATURES:• For coolant up to 1,500 PSI.• Collet pocket T.I.R 0.0001".• PowerCOAT nut included.

SPECIFICATIONS:Shank Diameter (C) .................... 1-1/4"Gage Length (l2) ............................1.69"Diameter (D) ................................. 1.97"

Part No. 7-520-04784Reg. Net Price $319.30

$25544

FEATURES:• Maximum T.I.R. 0.0001" taper to collet pocket.• Balanced to 25,000 RPM at G2.5 for high speed.• PowerCOAT included for 75% more clamping power.

CAT 40 V-FlangeER Collet Chucks

Produced According to AT3 Specifications.

Collet Gage Nose Part No. Reg. Size Length Dia. 7-520- Net Price

$220.02222.66237.15237.15

-22225-22227-22253-22255

ER-16 2.76 1.260 ER-16 4 1.260 ER-32 2.76 1.970 ER-32 4 1.970

SALE!$187.02

189.26201.58201.58

Cutting tool life isreduced by 10% with every .0001" of T.I.R. Techniks improvescutting tool life andsaves you money.

FEATURES:• Spindle rides in 2 sealed, pre-loaded ball bearings.• Optional faceplate & v-block available for eccentric forms.• 48 position index plate provides a hard stop every 7-1/2° ±45 arc secs.• Maximum spindle runout is 0.0001".

SUBURBAN TOOLCollet-Master™ Index Fixture

SPECIFICATIONS:Through Hole ................................ 1-1/4"Center Height .............................. 3-5/8"OAL ........................................... 5-9/16"Indexing Accuracy ................... ±45 sec.Weight .......................................... 9 lbs.

Model CM-5CPart No. 1-806-CM5CReg. Net Price $2,199.45

$1,86953

INCLUDES:Drawbar and fitted wooden case.

WMCF Manual Collet FixtureFEATURES:

• Horizontal/vertical set-up.• 5C capacity 1/16" to 1-1/8".• Cam-operated collet closure.• Collet remains fixed.• Mechanical fixtures.• 5" x 4" x 4" high.• Cast Iron.

Part No. 1-589-100Reg. NetPrice $445.78

$37891

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

WORK HOLDING

12

FEATURES:• Fine precision ground finish for use as an inspection device.• 90o Vee.• Fixed on/off switch.• Holding power: 220 lbs.• 3-3/4" (H) x 2-3/4" (W) x 4" (L); V width 2".

Magnetic V-Block

Part No. 1-397-405Reg. Net Price $145.50

$11640

Normal Reg. Reg. Circular Part No. Net Price Part No. Net Price TPI 1-587- Per Pair 1-587- Per Pair

$49.5049.5049.5049.50

$49.5049.5049.5049.50

Straight Tooth 30° Diagonal Tooth

12162025

-S212-S216-S220-S225

-D212-D216-D220-D225

SALE! SALE!$42.08

42.0842.0842.08

$42.0842.0842.0842.08

High Speed Knurls

Knurling Tool

Knurling pressure is absorbedbetween the knurls, NOT your lathebed, compound, centers or feed screws. Fast setup. Instantly readyfor knurling. Knurling patterns areclean and sharp with no double tracking. Includes one set of diagonal knurls. Size 3/4" x 3/8" x 1/4".

Quick-Acting Clamp Type

0-2-1/8" 6" 1/2"x 5/8" 2-1/8-4 8-1/4 5/8 x 3/4

Part No. Reg. Capacity Length Shank 1-587- Net Price NOW!

-1000-2000

$358.51452.44

$304.73384.57

SPECIFICATIONS:V-Block Capacity ................................... 1-5/8"Collet Capacity ..................................... . All 5CThrough Hole ......................................... 1-1/4"Center Height ............................................. 3"Height .......................................................... 6"Base (L x W) ........................................ 4" x 5"Weight .................................................. 22 lbs.

SUBURBAN TOOLMaster-Grind™

FEATURES:• Features "TWIN-DEX", which combines 5C collet and V-Block in one fixture.• Horizontal or vertical v-vlock mounting.• Extra-large, 1-5/8" V-Block capacity.• Spindle runs in 2 heavy-duty, 4" tapered roller bearings.• 72 position index plate allows hard index every 5O.• Square and parallel within 0.0002".• Maximum spindle runout 0.000050".• Built-in sine bar.

SineSet ® COMPATIBLE!

Model MG5-CV-S1Part No. 1-806-MG5CVS1Reg. Net Price $4,826.70

$4,10270

Suppliedwith a fittedwooden case.

SIDE VIEW

Tailstock Alignment Bar

Used to align the tailstock to the headstock. Accurate alignment is critical to eliminate any taper in work pieces supported by the tail stock. Makes the process fast, easy and accurate.

Part No. 1-811-27000Reg. Net Price $108.48

$8678

FEATURES:• Hardened steel bar ends are precision ground

after assembly for superior accuracy. Bar end diameters are equal within 0.0001".• Made from high strength aluminum.• Durable anodized finish.

FEATURES:• No pinch main screw handle.• Made of structural cast steel.• Finished in high visibility safety yellow.• Replaceable hardened steel serrated top jaws.• Permanent pipe jaws & a large reinforced anvil.

High Visibility Utility Combination Pipe and Bench VisesWith 360O Swivel Base & 2 Lockdowns.

$190.65243.35

Vise Jaw Jaw Pipe Throat Weight Part No. Reg. Number Width Opening Clamping Depth (lbs.) 1-554- Net Price

-200-205

4" 4" 1/4" to 1-1/2" 2-1/4" 17 5 5 1/2" to 1-1/2" 2-5/8 24

904-HV905-HV

$162.05206.85

NOW!

LIMITED QUANTITIESWhile Supplies Last.

FEATURES:• 360° swivel base with double lockdown for quick and easy positioning.• Replaceable serrated top jaws.• Large anvil work surface.• Rubber pinch point safety guards.• Built-in pipe jaws handle various pipe sizes.• Designed for general duty applications.

Jaw Max. Jaw Weight Part No. Reg. Width Opening Depth (lbs.) 1-550- Net Price

4" 4" 2-3/4" 22 5 5 3 31 6 6 3-1/2 42 8 8 4 71

-63300-63301-63302-63304

$255.73296.41433.98648.71

$217.37251.95368.89551.40

SALE!

Shop Vises

Major Credit Cards Accepted: 13Subscribe @ KBCTools.com to Get Exclusive Email Offers.

WORK HOLDING

Parallel Separator

FEATURES:• Saves time - faster, fewer setups!• Low cost - pays for itself the first day.

Holds ParallelsIn Place...

No More Fumbling!

For 6" Vises with up to 9" Jaw Opening

Part No. 1-572-PS6900Reg. Net Price $76.24

$6862

SPRING LOADED!MACHINIST’S THIRD HAND... FINALLY A REVOLUTIONARY LABOR SAVER!

Keeps parallels wherethey belong...in the viseand against the face.

DX6™ Crossover™ Vise FEATURES:

• DX6™ CrossOver™ vise is a combination of AngLock®, Pull-Type and 4 bolt stationary jaw design. – AngLock® design reduces stress on body during clamping. – Pull-type design reduces stress on body during clamping. – 4 bolt design reduces stationary jaw

deflection & alleviates body stress.• Bed height matched to size 2.875" (73.025mm) ±.0005".

• 80,000 PSI ductile iron body, nut & movable jaw.• Repeatability within .001".• Chip evacuation straight through the body.• Large 9" jaw opening.• GrooveLock jaw plate and workstop included.• New brush seal design makes it easier to replace.• Fits on D50-4-SA swivel base.• Hardened vise bed/jaw plates.

Max. Max. Model Jaw Jaw Jaw Vise Vise Clamping Weight Part No. Reg. No. Width Opening Depth Length Width Force (lbs.) (lbs.) 1-5721- Net Price

DX6 6" 9.08" 1.735" 16.810" 7.391" 7,342 65 -DX6 $1,055.86 $844.69SALE!

Part No. 1-459-500Reg. Net Price $400.60

$34051

SET INCLUDES:• Piston Type Tool Post Series 100 (100).• Turning & Facing Holder #1 (101).• Boring, Turning & Face Holder #2 (102).• Heavy-Duty Boring Bar Holder #4 (104).• Universal Parting Blade Holder (107).• Knurling, Turning & Facing Holder (110).

Lathe Swing Up to 12"

Part No. 1-459-600Reg. Net Price $449.50

$38208

SET INCLUDES:• Piston Type Tool Post Series 200 (200).• Turning & Facing Holder #1 (201).• Boring, Turning & Face Holder #2 (202).• Heavy-Duty Boring Bar Holder #4 (204).• Universal Parting Blade Holder (207).• Knurling, Turning & Facing Holder (210).

Lathe Swing 10 to 15"

All Toolholders Interchangeable with Aloris Type Toolholders.

6 Pc. Quick Change Tool Post Sets

Compound Slide Table

Part No. 8-400-310Reg. Net Price $308.45

$24676

A heavy, rugged slide used in allkinds of positioning, milling, drilling,microscope viewing and staging.

SPECIFICATIONS:Table ....................................... 12"Height ................................. 4-1/2"Travel ............. 6-1/2" longitudinal,........................... 4-1/2" transverseT-Slot Size ........................... 9/16"Weight ............................... 36 lbs.

Part No. 1-549-320Reg. Net Price $210.80

$17918

FEATURES:• Fixed jaw is grooved horizontally and vertically for convenience in holding round pieces.• Fine pitch, V-thread lead screw for precise movement.

SPECIFICATIONS:Jaw Width ........................ 3"Jaw Depth ................ 1-1/2"Jaw Opening ................... 3"Bolt Lugs ....................... 1/2"Height ....................... 2-5/8"Weight ........................ 8 lbs.

Drill Press Vise With Lugs

Adapt small taper tools to largersize spindles. Outside taper is precisionground for excellent concentricity of the holder.

1 2 1 3 2 3 2 4 3 4 3 5 4 5

Morse Morse Gage Taper Taper Line Part No. Reg. Inside Outside Dia. Projection 1-543- Net Price

$37.2040.3040.3048.0562.0099.2099.20

$31.6234.2634.2640.8452.7084.3284.32

.700" .938 .938 1.231 1.231 1.748 1.748

5/8" 1/4 3/4 1/4 3/4 1/4 3/4

-60212-60213-60223-60224-60234-60235-60245

NOW!

Reducing Sleeves

CAT 40 Tool Holder Tightening Fixture

Designed to rigidly hold tool holders for cutter installation. The design also allows access to pull studs.

FEATURES:• Rigidly clamps CAT 40 tool holders.• Durable one piece alloy construction.• Multi position alloy clamping handle.• Mounts with four 1/4" bolts (not included).

Part No. 1-811-23000Reg. Net Price $155.00

$12400

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

ABRASIVES

14

AZ Surface Grinding Wheels

VITRIFIED BONDED - AZ:Premium Blue Aluminum Oxide.Particularly suited for grinding HSS over 55RC. Specially recommended for grinding heat sensitive steels like aluminum and stainless steels. It grinds with an exceptionally cool cutting action. Requires minimum dressing.

7" x 1/2" x 1-1/4" - 3,760 RPM

Part No. Reg. Net Grit 1-595- Price/Ea.

$25.5025.5025.5025.5025.5025.5025.5025.5025.5025.50

$21.6821.6821.6821.6821.6821.6821.6821.6821.6821.68

-34318-34319-34320-34321-34323-34324-34325-34326-34329-34330

46-H 46-I 46-J 46-K 60-H 60-I 60-J 60-K 80-K 100-K

SALE!

6" Diamond Plain Cup WheelsType 6A2C

DW

T

H

E

Use for grinding single point turning tools. Availablein D11V9.

FEATURES:• Resin bonded.• 150 Grit, 100 Concentration - 1/8" Depth 75 Concentration - 1/16" Depth• With countersunk bolt holes.

Economy 75 Concentration with only 1/16" Diamond Depth.

$170.65146.10183.85

Thick. Depth Hole Part No. Reg. T W H 1-640- Net Price 3/4" 3/4" 1-1/4" 3/4 1/2 1-1/4 1 3/4 1-1/4

-162-163-164

SALE!$136.52

116.88147.08

Quickie Cut™ Reinforced Cut-Off Wheels

TYPE 1.045 - RIGID

Zirconia AO mixture. Thick (.045), rigid wheel design for fast cutting and longer life. Excellent on steel/stainless.

4-1/2" x .045" x 7/8" ZA-36-T-RIGID 13,300 5 x .045 x 7/8 ZA-36-T-RIGID 12,250 6 x .045 x 7/8 ZA-36-T-RIGID 10,200 7 x 1/16 x 7/8 ZA-36-T-RIGID 8,500

Max. Part No. Size Grade RPM 1-602-

$2.452.903.104.80

-35514-35516-35517-35518

ONLY!

Maximize your "Mini" grinder with the line of compact brushes. Designedspecifically to fit the majority of the mini-grinders used today, our wide line & multiple arbor hole adaptation covers both light and heavy-duty cleaning jobs. Carbon steel wire.

Mini-Grinder Brushes5/8"-11 THREADED HOLE

WIRE SIZE .020"

Knot Style Cup WheelWheel Dia.: 2-3/4"Trim Length: 7/8"

Part No. 1-621-115Reg. Net Price $28.45

$2418

Stringer Bead Twist WheelWheel Dia.: 4"

Trim Length: 3/4"Face Width: 3/16"

Part No. 1-621-117Reg. Net Price $27.20

$2312

2" Surface Conditioning DiscsA/O RAPID CUT

FEATURES:• Highest initial rate of cut.• Very flexible and durable.• Recommended Speed:

12,000 to 20,000 RPM.• Highest stock removal and resists "loading" on softer metals.

TYPE "S"

Part No. Reg. Net Grade 1-631- Price/Disc

Coarse Medium Very Fine

$1.771.771.77

-840334-840335-840336

$1.591.591.59

SALE!

Type "R" Rol-On2" Disc HolderWITH 1/4" SHANK

Type "R" Quick-Change Interchangeable with 3M ROLOC®

Medium DensityPart No. 1-613-11275

$983

Quick Change 2"Laminated DiscsALUMINUM OXIDE (A/O)

SocAtt® features an all-metal attachment on the holder padand disc to ensure a safe,secure, durable fit.

FEATURES:• Ideal for flat or contour surfaces.• Most commonly used are grits 36-50 for weld removal. Grits 60-120 for removal of

imperfections and blending.• General purpose grinding, deburring, and blending on ferrous metals.

$1.201.161.101.051.011.001.001.001.001.001.001.00

-522401-522402-522403-522404-522405-522406-522407-522408-522409-522410-522411-522412

Part No. Reg. Net Grit 1-631- Price/Disc

24 36 40 50 60 80 100 120 150 180 240 320

$1.081.04

.99

.95

.91

.90

.90

.90

.90

.90

.90

.90

NOW!

MUST BE PURCHASED IN PACKS OF 100.

TYPE "S"

Interchangeable with 3M Roloc TS discs, Merit Type II Twist-On, Norton Speed-LokType "S" Turn-On

2" Disc HolderWITH 1/4" SHANK

Part No.1-613-11173

$983

FEATURES:• Discs are designed to resist loading, extending service life.• Continuous supply of mineral in abrasive-filled bristles provides a high cut rate and more uniform finish.• Flexible yet durable bristles conform the work piece without damaging base material.• Maximum Speed: 25,000 RPM.

2" Scotch-BriteTM RolocTM Bristle Discs

Part No. Reg. Net Grit Color 1-630- Price/Disc

$14.48 14.48

14.48

-18730-18732-18733

50 Green 80 Yellow 120 White

$13.03 13.03

13.03

NOW!

Major Credit Cards Accepted: 15Subscribe @ KBCTools.com to Get Exclusive Email Offers.

ABRASIVES

Internal and external rotary deburring tool. Twist of the wrist motion for convenient deburring of holes and radii.

THE FINISHING TOUCH...

Deburring Tools

Part No. 1-457-008Reg. Net Price $2.53

$190

H.S.S. blade excellent for materials with spiral chips such as aluminum, plastics, steels, etc. For longer life.

Model B10

Model B10P

Part No.1-457-008XReg. NetPrice $2.98

$224

PVD Titanium Nitride coated B10 blade for high wear conditions.

Model B25A very thin blade specifically designed to deburr soft plastics.

Part No.1-457-066Reg. NetPrice $3.05

$153

Part No. 1-457-052Reg. Net Price $18.26

$1461

Model B Deburring Tool Set SET INCLUDES:• Classic Handle.• Model B blade holder.• Blades: B10 & B20.

India (aluminum oxide) Reamer Stonesare durable, fast-cutting stones designedfor imparting a professional edge on reamers,taps and rough rounders on shoe machine tools.

Reamer Stone

5" x 1" x 3/16"

Part No. 1-632-87425Reg. Net Price $18.23

$1641

FEATURES:• Gives up to 30x more life than a resin fiber-disc saving considerable set-up time and money.• Cuts much cooler and reduces glazing and loading with self sharpening flaps.• Especially lightweight design reduces operator fatigue and noise levels.• Provides better quality and consistency of surface finish.

Flap DiscsZ3 ZIRCONIA -Premium 100% Zirconia Aluminum with cottonbacking to provide flexibility. Offers maximum cutting capacity, strong edgestability and long-life.

guaranteedfully

Part No. Reg. Net Part No. Reg. Net Size Grit 1-704- Price/Ea. 1-704 - Price/Ea.

TYPE 27

$6.056.056.05

-2302-2304-2305

$6.056.056.05

-2322-2324-2325

406080

4-1/2" x 7/8"13,300 RPM

TYPE 29

$5.455.455.45

$5.455.455.45

SALE! SALE!TYPE 27 - Used when working on flat grinding surfaces. Most efficient when used between 0-15° angle.

TYPE 29 - Conical type has an angle excellent for contour and edge work. Best at more dramatic angle of 15-25°.

SHUR-KUT® Premium Gold Stik-On Stearate Paper DiscsHeavy duty paper disc with anti-load stearate coating that is resin bonded for fast cutting and long life. Designed for industrial and automotive use. Ideal for metal, wood, paint and fiberglass.

Part No. Reg. Net Size Grit 1-613- Price/Roll

$57.3853.6653.66 53.66 53.66 53.66 53.66 53.66

-25078-25079-25080-25081-25082-25083-25084-25085

80100120150180220240320

5"100/roll

$51.6448.2948.29 48.29 48.29 48.29 48.29 48.29

SALE!

Single-PointDiamond Dressers

FINEST QUALITY

$8.849.77

13.8723.0234.18

Part No. 1-640- Weight 3/8" 7/16" 1/2" Reg. (Carat) Shank Shank Shank Net Price 1/4 -200 -201 1/3 -203 -204 1/2 -206 -207 3/4 -209 -210 1 -212 -213

-202-205-208-211-214

$7.518.30

11.7919.5729.05

NOW!

India Square Abrasive Files

INDIA FILES: Smooth cutting aluminum oxide abrasive. Ideal when a close tolerance is moreimportant than the speed of cut.

Applications range from dimensioning keyways to maintain fit, stoning faces on router bits, touching-up edges of reamer teeth, and lapping/honing to close tolerance to produce the finest edge onprecision instruments, diework and delicate tools.

ALUMINUM OXIDE

Part No. Reg. Size Grit 1-632- Net Price

4"x 1/4" Medium 4 x 1/4 Fine 4 x 3/8 Medium 4 x 3/8 Fine 4 x 1/2 Medium 4 x 1/2 Fine

-86070-86065-86085-86080-86100-86095

$13.1013.1013.2613.2613.3713.37

NOW!$11.79

11.7911.9311.9312.0312.03

INCLUDES:• RB handle (12mm hex, aluminum).• OR ("O" ring grooves blade).• RD 16.5 (RotoDrive countersink).• RDE 18 (External RotoDrive countersink).• TC (Thread cleaner blade).• S100 Blade (for steel).• S150 Blade (for plastic).

Model SP1007Part No.1-457-525Reg. NetPrice $67.20

$5376

007 Deburring Set

Part No. 1-457-375Reg. Net Price $96.26

$7995

Deburring & Chamfering Kit

SET INCLUDES:• Mango II Handle• Holder E• Holder F• Blades: E100S, E111, E200, E300,

E601, F20, F26X

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

MEASURING & INSPECTION

16

P.D. Check™ Thread Wire Attachment System

The first new breakthrough in measuring threads using the 3 wire method in 35 years!

INSTRUCTIONS:1. Select the Proper Size wires.2. Match the Wire Size with the Proper P.D. Check™3. Slip Two Wires in the Holder.4. Now Place the Holder on the MIC's Anvil.5. Hold the Micrometer in one Hand and the Third Wire in the other.6. Check the Threads.

SET INCLUDES:• .018"-.022" (Purple)• .024"-.032" (Blue)• .040"-.045" (Yellow)• .055"-.063" (Green)• .072"-.081" (Red)

FEATURES:• Fits all MIC's with .245" to .312" Anvils.• No more lost thread wires in the chip pans.• Specifically designed for rapid

and accurate measurement.• Each part fits 2 sizes of wires.• Micrometer not included.

Part No. 1-820-16707

Reg. Net Price $35.18

$2990

2-8" Inside Micrometer

FEATURES:• Each interchangeable rod is marked with its measuring range.• The sizes of interchangeable rods can be adjusted with spacing collars.• Both micrometer head and furnished rods are satin-chrome finished throughout.• Wide range of ID measurements with interchangeable rods.• Includes (1) Mic Head and (3) rods (diameter: .248").

SPECIFICATIONS:Range ..................... 2-8"Spacing Collar ...... .500"Graduation ............ .001"

Part No. 1-808-141208Reg. Net Price $216.00

$18360

II Electronic Micrometer

FEATURES:• Ratchet thimble.• Large LCD display.• Direct RS232 output.• Carbide measuring faces.• Jet black, grey, enamel finish.• Resolution: .00005" (.001mm.)• Accuracy: ±.00016"/.004 (up to 2")• Absolute and incremental modes.• Replacement battery: CR2032• Includes shop hardened case.

FREEBALLATTACHMENT!

Size Range: 0-1" (0-25mm)Part No. 54-870-001Reg. Net Price $125.15

$10638

Fillet or Radius GagesThese gages are used to measure convex & concave radii works.

$19.9223.72

No. Of Part No. Reg. Leaves Range Radii 1-820- Net Price

30 1/32-1/4" 32 17/64-1/2

-306-307

INCH

$14.9417.79

SALE!

$15.1118.1418.14

No. Of Part No. Reg. Leaves Range Radii 1-820- Net Price

34 1.0-7mm 32 7.5-15 30 15.5-25

-258-259-260

METRIC

$11.3313.6113.61

SALE!

Thickness GageSeries 950 - Inch

FEATURES:• Each leaf is marked with its

thickness and is detachable.• Thicknesses Included: (26) .002" - .018" by .001" step, plus .022, .024, .025, .028, .030, .032, .035"• Blade Length: 3"

Part No. 1-808-950251Reg. Net Price $35.00

$2975

FEATURES:• Color indicates thickness.• Packaged in a sturdy vinyl case.• Made of the highest quality plastic material.• Contains thirteen blades riveted

together for on-site convenience.• Non-corrosive, non-conductive,

non-sparking, and non-marring.

Plastic Thickness Gage

5" Fan Blade SetPart No. 1-958-78905

$3094

THIRTEEN THICKNESSES Decimal/Metric Color Decimal/Metric Color

.001"/.025mm.0015/.038mm

.002/.051mm

.003/.076mm

.004/.102mm

AmberPurpleRedGreenTan

.005"/.127mm.0075/.191mm

.010/.254mm.0125/.305mm

BlueMatteBrownBlack

.015"/.381mm.020/.508mm.025/.635mm.030/.762mm

PinkYellowWhiteCoral

Decimal/Metric Color

Electronic Height Offset Sensor

A

B

CFEATURES:• Repeatability T.I.R. within .0002"-.0006mm.• Four high visible lights.• Made of high quality tool steel hardened to 60 RC.• Easily replace lamp and battery.• Precision ground on all surfaces.• One-piece design construction

gives strength and accuracy.

SPECIFICATIONS:A ........................ 1"B ... 2.000" ± .0002"C ................... .310"

Part No. 1-801-310Reg. Net

Price $210.07

$17856

Edge & Center Finders

FEATURES:• Accurately locates the starting point for

all types of machine work and jig boring.• Precision ground and hardened all over.• Supplied in a fitted case.

Edge Finder Combo Edge/ Center Finder Double Edge Finder

$18.87

21.55

21.55

Part No. Reg. Type Shank x Head 1-804- Net Price

-528

-531

-533

3/8 x .200

3/8 x .200

1/2 x .200

$16.04

18.32

18.32

SALE!

Series 141 - Interchangeable Type

Major Credit Cards Accepted: 17Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MEASURING & INSPECTIONIP65 6" Digital Torpedo LevelFEATURES:• Reversible reading.• HOLD and Zero functions.• Rare-Earth magnetic base.• Precision digital level sensor.• Calculate tilt percentage rate.• V Groove base for measuring cylindrical objects.• Rechargeable battery (USB charging cable included).• Large LCD display with backlit.• Industrial grade aluminum body.• IP65 water & dust resistance rating.• 1 year warranty.

Part No. 1-815-210Reg. Net Price $123.92

$8995

SPECIFICATIONS:Measuring Range 360o .............. 90o x 4Resolution .................................... 0.05o

Repeatability .................................. 0.1o

Accuracy ...................................... ±0.2o

Dimensions .............. 6" x 1.18" x 2.46"

3 Pc. Machinist Square Set

Part No. 1-815-220Reg. Net Price $80.60

$5995

FEATURES:• Manufactured to DIN 875-1 standard specification.• Hardened spring steel blades.• Precision ground and lapped.• Complete with protective case.• Included Sizes: 2, 4, & 6".

4 Pair Set with Plastic Case.3/16" x 1" x 6", 3/16" x 1-1/4" x 6",1/2" x 1-1/2" x 6", 1/2" x 1-3/4" x 6"

Part No.1-801-210Reg. Net

Price $72.10

$5500

FEATURES:• Hardness: Case hardened to RC 55-62 on 2 sides top and bottom only. • Dimensions: Within 0.001" allowance. • Made from fine quality tool steel stress relieved against distortion, precision ground and hardened. • Tolerance: Parallel 0.0003" on 2 sides, top and bottom. • The holes are designed for easier handling and set-ups.

Matched Pairs 5 Holes

Precision Parallel Set

The Touch Off Gage allows standardization the way tool offsets are measured in the shop. Use this gage by lowering the tool down onto the contact face until the indicator reads zero. At that point the tool tip is exactly 4 inches from the surface the Touch Off Gage is sitting on.

Part No. 1-811-52000Reg. Net Price $193.73

$16467

Touch Off Gage

FEATURES:• Gage graduations 0.001". • Gage repeatability 0.0002". • Accurately establishes tool length offsets for CNC milling machines. • The contact face is lightly spring loaded to protect against overrun. • Contact face diameter is 1/4". • The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. • Offset height 4" (101.6mm). • Large 2.2" easy to read indicator face. • Easy calibration check using 1-2-3 blocks. • Body and contact face are made from red anodized 6061-T6 aluminum. • Padded case and manual included.

SPECIFICATIONS:Range .................................................... 0-22"Base Size ................................................... 4"Resolution ............................. .0005" (.01mm)Travel (Electronic) ................................... 0-1"

0-22" ElectronicDepth Gage

FEATURES:• Hold feature.• ON/OFF button.• Zero reset at any position.• Relative/absolute measuring.• Bottom surface of the base is hardened, ground & lapped.• Includes shop-hardened case.• Includes 2 extra points for small hole applications; (1) .078" dia. x 1" long and (1) needle point x 1" long.

Part No. 54-125-777Reg. Net Price $342.00

$29070

White Face Dial Caliper KitPart No. 8-135-0018Reg. Net Price $145.55

$11644

INCLUDES:• Dial Caliper: 0-6"• 12" Blade 4R (8ths, 16ths, 32nds, 64ths)• Outside Micrometer: 0-1" x .0001"• Square, Protractor and Center Head• Fitted Plastic Case

6 Pc. Set-Up & Inspection Kit

Part No. 1-815-455Reg. Net Price $116.10

$8708

4 Pc. Combination Square Set

FEATURES:• 4R Graduation: 8ths, 16ths, 32nds, & 64ths.• 12" Satin Chrome finished blade is hardened and tempered with easy to read laser etched graduations.• Square Head featured with a level and a scriber point.

• Protractor head is graduated 180° in both directions and with a level.• Smooth edged locking clamp screw for easy assembly and smooth travel.• Certificate of Inspection included.• Completed with molded protective case.

FEATURES:• Hardened steel head and an accurate, machine divided, tempered steel rule.• Gage can be smoothly

adjusted to the required measurement and then locked into position

by a knurled nut.• Base is cut out on one side, adjacent to the rule, permitting easier readings and more

accurate measurement.

0-6" Steel Rule Depth GageSeries 237

Graduation: 32nds, 64thsHead: 2-5/8" x 1/8"

Starrett #237Part No. 1-855-51080Reg. Net Price $75.90

$6452

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

MEASURING & INSPECTION

18

FEATURES:• Easy Install Fits Most Vertical Knee Mills.• Absolute encoding technology (Memorize absolute origin zero).• Hardened stainless steel body.• IP54 Digital Scale.• Easy to read LCD with resolution of

.0005"/0.01mm/64th fractional.• Readout Accuracy: .001"• Ability to preset value.• Zero-Set and On/Off.• Data output available.• Ultra-Response measure speed.• Uses (2) CR2032 Batteries

HDS Digimatic Height Gages w/Absolute EncoderSeries 570 - with Output

FEATURES:• Feed wheel.• Can easily measure the height of small parts.• Unlimited response speed.• Absolute encoder for direct measurement from power on.• Easy-to-read, large LCD display, 6 digit and minus sign (-).

• Functions Include: Zero-Setting (ABS & INC modes), Presetting (ABS & INC modes), Hold/Data Button, Inch/mm Conversion, Data Output, Error Alarm, Low Battery Alarm, ON/OFF, Origin.• Battery Life: Approx. 20,000 hrs.• Economical energy-saving design.

$795.001,426.00

-570312-570314

Part No. Reg. Range Resolution Accuracy 1-808- Net Price

0-12" (0-300mm) .0005" (0.01mm) ±.0015" 0-24" (0-600mm) .0005" (0.01mm) ±.002"

$675.751,212.10

SALE!

IP54 0-6" Electric Digital Quill Kit FOR MILLING MACHINES

Part No. 1-815-600Reg. Net

Price $170.50

$14493

FEATURES:• V’s are ground central, parallel, and square.• Matched accuracy .0002".• All sides are ground square and parallel to pin accuracy of 0.0003".• 2-475-015 & 2-475-020 Models

are designed so the clamps do not protrude over the sides; thus

the tool can be used on its sides.• Supplied in pairs w/ 2 clamps.

Precision V-Block Sets

Part No. Reg. Net Capacity Dimensions 2-475- Price/Set

$77.3597.50

123.25277.45

1" 1-3/8" x 1-5/8" x 1-3/4" 1-1/2 1-5/8" x 1-3/4" x 2-3/4" 1-1/2 1-3/4" x 2-1/2" x 2-3/4" 2-1/8 2-3/4" x 3-1/2" x 4-7/8"

-005-010-015-020

$61.8878.0098.60

221.96

SALE!

Center GagesSeries C391

FEATURES:• Extremely handy for use in grinding and setting screw cutting tools, meets all of the following standards: American National or U.S. 60°, Whitworth or English 55°, and Metric 60°• Have a very useful scale for finding the number of threads per inch through graduations in 14ths, 20ths, 24ths and 32nds of an inch.• Have a table of double depths of threads for determining size of tap drills.• Made of spring-tempered steel with satin

chrome finish. Gaging surfaces ground.

American Unified National Standard 60O

Starrett #C391Part No. 1-855-51475Reg. Net Price $33.52

$2849

FEATURES:• Ultimate V-Block for grinding, milling, or drilling.• Made of hardened and precision ground tool steel.• The sides are parallel and vee is central and ground.• Central hole is provided for drilling or removing pins.• Clamp is smaller than outside width of V-Block and has adjustable side screw for support.• V-Block has four 3/8-16 tapped holes, two in the base and one on each side for angle iron clamping.

SPECIFICATIONS:Length ......................... 3-1/2"Width .......................... 1-7/8"Height ......................... 1-7/8"Holding Capacity ...... 1-5/16"Tolerance ................... .0003"

Toolmakers’ V-Block & Clamp

One Block & One ClampPart No. 1-397-710Reg. Net Price $92.85

$6964

FEATURES:• Used for determining the true size of holes, slots and recesses. The final hole size is obtained by measuring over the gage contacts with a micrometer.• Gages feature a handle, one rigid contact arm and two spring-tensioned telescoping contact arms.• The ends of both contacts are hardened and ground to radius to allow proper clearance on the small hole the gage will enter.• These tools must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn.• Complete set of 6 (5/16 to 6") in plastic case. (Included No. 579A, B, C, D, E, F).

6 Pc. Telescoping Gage SetSeries 579 Self-Centering with Two Telescoping Arms.

Starrett #S579HZPart No. 1-855-52617

Reg. Net Price $356.73

$30322

FEATURES:• Four different attachments (Holder, Point, Ball, and Disc Contact) to adapt to countless

applications and are readily changeable.• Attachments are snapped into chuck without removing the collet nut.• Comes complete with case.

Wiggler & Center Finder w/ Attachments Series 828

Starrett S828HZPart No. 1-855-53064Reg. Net Price $86.02

$7312

FEATURES:• Certified.• Ground and lapped.• Chrome steel hardened to 63 RC.• 4 wells provided for additional sizes.• Grade 24 accuracy - AFBMA Certified.• Attractively arranged in a plastic case.

Inspection Gage Balls

SIZES: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 13/16", 7/8", 15/16" & 1"

26 pairs of precision ballsranging from 1/8" to 1" diameter.

Part No. 2-672-070Reg. Net Price $117.65

$10335

Major Credit Cards Accepted: 19Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MEASURING & INSPECTION

Electronic CalipersEXPANDED LISTING!

Range: 0-6"Part No. 54-101-150Reg. Net Price $64.40

$5474

Range: 0-12"Part No. 54-101-300Reg. Net Price $162.47

$13810

FEATURES:• Direct inch/metric conversion.• 4-way measurement.• Stainless steel frame.• Large easy-to-read display.• Resolution: .0005" (.01mm)• Absolute/incremental measurement.• Supplied with a molded case.

FEATURES:• Range: 0-6" (0-150mm)• Accuracy: .001" (.02mm)• Heavy duty frame with 4 way measuring.• Super large display.• HID interface allows connection to most

bluetooth enabled devices.• Supplied with NIST certification.• Protected to IP67.• Replacement battery CR2032.• Extra battery tray and 1" standard included.

0-6" Electronic Caliperwith Smart Wireless Communication

Part No. 54-100-556BT

Reg. Net Price $249.75

$21229

* 0.75" Rod depth bar.

WITHOUT SPC OUTPUT MODELS

0-4" (0-100mm)* .0005" (.01mm) 0-6" (0-150mm) .0005" (.01mm) 0-8" (0-200mm) .0005" (.01mm)

-500195-500196-500197

$183.00197.00285.00

Part No. Reg. Range Resolution 1-808- Net Price

$155.55157.60242.25

SALE!

IP54 Large Display Electronic Caliper

FEATURES:• Resolution: .0005" (.01mm / 1/128" fractional).• Hardened stainless steel body.• Precision lapped finish for smooth travel.• IP54 - Splash water, oil and dust resistant.• 1 Year Warranty.

Range: 0-6" (0-150mm)Part No. 1-815-100Reg. Net Price $77.42

$5807

INCH - METRIC - FRACTIONAL

Caliper Jaw Attachment for AnvilsUse Mic Anvilson 4-6-8" Calipers

Caliper jaw attachment is fastened to your caliperjaw, and the mic anvil fits onto the jaw attachment.

Part No. 1-850-Z9050Reg. Net Price $44.76

$3805

Supplied in shophardened case.

Dial Calipers

Part No. Reg. Range 52-008- Net Price

$85.93186.91

0-6"0-12

-007-012

SALE!$68.74149.53

FEATURES:• Accuracy: ±.001"• Dial Graduation: .001" • .100" per revolution.• Dial Color: White• 4-way measurement..• Hardened stainless steel covered rack.

FEATURES:• Resolution: .0005" (.01mm)• Unlimited measuring speed.• IP54 splash water and dust resistant.• Hardened stainless steel, lapped finished.• Operating Environment: Temp. 32OF - 104OF; Relative Humidity: 80%

• SPC Output with USB connection available.• Meets DIN standard 862; ISO 9001 certified manufacturing.• Battery: (1) 3V CR2032 (spare included) with

a life of 2 years under normal operation.• 2 year warranty.

IP54 Absolute Digital Caliper

2 YEAR WARRANTY!

0-6" (0-150mm) .001" (.02mm) 0-12" (0-300mm) .0015 (.04mm)

-130-140

$99.85176.35

Part No. Reg. Range Accuracy 1-815- Net Price

$74.89132.26

SALE!

Dial Calipers Series 3202

3202-63202-83202-12

-61467-61468-61466

0-6"0-80-12

Starrett Part No. Reg. No. Range 1-855- Net Price

$146.74209.99306.13

$124.73178.49260.21

SALE!

FEATURES:• Adjustable bezel. Knife-edge contacts.• Sharp, clear dial graduations.• Thumb-operated fine adjustment roll.• Lock screws for sliding jaw and dial bezel.• Positive, spring-loaded double pinion anti-backlash control.

• Sharp, black graduations on satin finished bar.• Provides quick, accurate measurement of

O.D., I.D. and depth.• Hardened stainless steel bar, measuring

surfaces, rack, gears & depth rod.

ABSOLUTE Digimatic CalipersSeries 500 w/ Exclusive ABSOLUTE Encoder Technology

FEATURES:• Thumb roller included.• Large and clear LCD readout.• The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).

Suppliedin a fittedplastic case.

Mitutoyo's Digimatic Caliper keeps track of its origin point once set. Whenever turned on, the large LCD screen displays the actual slider position ready to start measurement. No more repeated zero setting is necessary with the absolute encoder technology as well as no more care for overspeed errors.

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

MEASURING & INSPECTION

20

Horizontal TestIndicator andAccessory Combo Kit

Part No. 8-100-4870Reg. Net Price $165.80

$12995

FEATURES:• Range: .060"• Graduation: .0005"• Dial Diameter: 1-1/2"• Dial Reading: 0-15-0

SET INCLUDES:• Axial support.• Adapter sleeve.• 2 dovetail stems.• Universal holder.• Dial test indicator.• Supplied in fitted

plastic case.

• Height gage bar w/clamp.• 3 contact points: (.040", .080" & .120").• Contact point wrench.

All contact points are carbide.

For all series 312 models except:312B-15, and 312B-15V

Contact Points

Model Part No. Reg. No. Dia. Length 1-818- Net Price

$38.7538.7538.75

T-481 .080" 11/16" T-483 .060 11/16 T-485 .031 11/16

-015-016-017

$34.8834.8834.88

SALE!

6" Extended Range Dial Bore Gage Set

FEATURES:• Range: 0.7-6" (up to 10" deep).• Accuracy: 0.0005" with crisp precision graduations.• Carbide tip on plunger.• Full set of attachments and parts included.• 1 Year Warranty.• Supplied in a protective case.

Part No. 1-815-400Reg. Net Price $244.00

$14995

Bore Gage Setting Master Kit

SETTING DEVICE:• Quick-release holder for fast adjustment.• Adjustable Anvil: 2.375" x .375" (2 each)• Centralizer Capacity Width: 2.625"• Base Anvil: 2.750" x .80"• Internal Capacity: 6"• Depth Capacity: 1"

EACH KIT INCLUDES:

ECONOMY GAGE BLOCK SET:• Certificate of calibration to N.I.S.T.• Tolerance to .00005".• AS-2 Grade.

Inch Kit with 36 Pc. Block SetPart No. 53-646-000Reg. Net Price $361.33

$27100

Accurately set any bore gage up to 6" in diameter to an accuracy of .0001". Bore gage not included.

Supplied in a fitted case!

FEATURES:• Interchangeable anvils and necessary accessories

to perform close tolerance I.D. measurements. • A Digimatic Indicator can be attached in place of the dial gage.• Accuracy: .0002" (5µm)• Carbide ball contact point for durability.• Optional extension rods can be attached.

Dial Bore GagesSeries 511

No. of No. of Probe Part No. Reg. Range Anvils Spacers Depth 1-808- Net Price .70-1.4" 9 2 4" 1.40-2.5 6 4 6

-511751-511752

$443.00505.00

$376.55429.25

SALE!

3D Universal Mini Magnetic Base

Part No. 1-815-250Reg. Net Price $70.55

$4495

FEATURES:• Power pull: 50 lbs.• Overall reach: 7.5"• ON/OFF magnet switch.• V-groove magnet bottom surface for curved surface.• Anodized universal arm with one knob central lock.• Dovetail clamp for test indicator.• Clamping hole for indicator stem.• Complete with a protective mold-

ed case with space for test and dial indicator storage.

• 1 year warranty.

SPECIFICATIONS:Graduation ............... .0005”Capacity ..................... .060”Dial Diameter ........... 1-1/2”Dial Reading ........... 0-15-0Carbide Point Dia. ..... .080” Lgth ... 11/16”

Dial Test Indicators

5/32” adapter shank diameter.

Horizontal IndicatorModel No. 312b-1Part No. 1-818-004Reg. Net Price $438.65

$37285

Vertical IndicatorModel No. 312b-1vPart No. 1-818-009Reg. Net Price $466.55

$39657

WITHFITTED CASE

IP65 Dial Test Indicator

FEATURES:• Range: 0.030"• Graduation: .0005"• Reading: 0-15-0.• IP65 water and dust protective rating.• Jeweled movement.• Satin chrome finish body.• Face Diameter: 1-1/2"• Carbide Contact Points:

.040", .080", .120"• Point Length: 1/2"• 3 Dovetail Mountings

(front, top, rear)• 2 Dovetail Clamps (3/8" & 5/32")• Wrench included.• 1 year warranty.

Part No. 1-815-350Reg. Net

Price $89.00

$6650

FEATURES:• Contacts are frictionally adjustable and replaceable.• Meets or exceeds ANSI/ASME

accuracy specifications.• Precision gear-driven design with smooth, jeweled movement.• Narrow body for in reach ability.• Satin chrome finish for durability.• 3 dovetail positioning mounts

work with most existing test indicator accessories.

• Contact point reverses auto-matically, always maintaining clockwise hand rotation.

SPECIFICATIONS:Range .................. .030"Graduation ......... .0005"Dial Readings .... 0-15-0Dial Diameter ...... 1-1/4"

Starrett #3809APart No.

1-855-12333Reg. Net

Price $140.42

$11936

INCLUDES: Indicator, .156" contact point, 3/8" & 5/32" dovetailclamps & case.

Dial Test Indicator Series 3809

2923SB-10 INDICATOR FEATURES:• Range: .05"• Graduation: .0001"• Dial Reading: 0-5-0

Major Credit Cards Accepted: 21Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MEASURING & INSPECTION

DIAL INDICATOR FEATURES:• Graduation: .001"• Revolution counter.• .100 per revolution.• Dial Reading: 0-100

Dial Indicator & Flexible Magnetic Base Combo Kit

KIT INCLUDES:• Dial Indicator• Flexible Magnetic Base• Supplied in Plastic Storage Case.

Part No. 8-135-0038Reg. Net Price $99.55

$7964

MAG BASE FEATURES:• Fine adjustment.• Base dimensions: 2 x 2-11/32" x 1-13/16"• On-Off lever release magnet.• V-base for placing on round surfaces.• 85 lbs. pull.

IP54 Dial Indicator & Magnetic Base KitINDICATOR FEATURES:• AGD Group 2, 2-1/4" dia. • Travel: 0-1"• Reading: .001"• Continuous reading: 0-100• IP54 Water, dust, moisture

resistance rating.• Tolerance markers.• Lugback and carbide point.• Robust, shockproof design.• Rubber bellows on stem.

Part No. 1-815-305Reg. Net Price $100.75

$7499

COMPLETE WITH MOLDED CASE.

FEATURES:• Five axis holder.• Instant fixation in any position.• Fast and easy to set up gauges.• Universal swivel clamp holds a 6mm,

8mm, 3/8" stem, dovetail or back lug.• Powerful magnet with ON/OFF switch.• Central locking mechanism with NOGA

designed spring loaded bearing.• Arm Length: 4.33" Bottom, 3.98" Top.• Magnetic Pull: 176 lbs./ft.

UniversalMagnetic Base

WITH FINE ADJUSTMENT ON THE TOP

Model No. DG61003Part No. 1-457-909Reg. Net Price $169.95

$13596

Magnetic StandStand accept all AGD-type dial indicators, test indicators and probes having 3/8" dia. shank and/or lug back with 1/4" dia. mounting hole. The ON/OFF switch offers instant mounting and dismounting without any adverse effect to the indicators or work surface. Stands have a magneticpull of 132 lbs.

Model 7011BNWith 6" Fine Adjust Rod and Universal ClampPart No. 1-808-7011Reg. Net Price $123.00

$10455

FEATURES:• 4-48 Thread.• Tolerance markers.• Solid brass housing.• Popular AGD 2 Series.• Supplied with lug back.• Carbide tipped contact points.• Meets ANSI specs for accuracy.

Dial Indicator

Part No. 52-520-110Reg. Net Price $47.72

$3818

SPECIFICATIONS:Graduation ................... .001"Range ................................ 1"Dial Reading ............... 0-100

All packed in a Shop-Hardened case!

AGD INDICATORFEATURES: • Travel: 1"• AGD Group 2.• Reading: 0.001"• Dial Diameter: 2-1/4"• Carbide tipped point.• Continuous Reading: 0-100

FLEX ARM MAG BASE FEATURES: • 85lb. pull magnet.• Holds rigidly in almost any position.• V-base for mounting on rounded surfaces.• Corrosion resistant

chrome plated flex arm.

MAGNETIC INDICATORBACK FEATURES: • Use for positioning the indicator on most metal surfaces.• Protective coating.

Part No.52-585-500Reg. Net

Price $165.44

$13235

Dial IndicatorAGD GROUP 2 - No. 25 Series

FEATURES:• Shockless, hardened steel gear train and jewel bearings.• Hardened stainless steel bottom

stems, balanced and tapered hands are easy to follow.• Furnished with a lug-on-center back.• Easy readability.

SPECIFICATIONS:Graduation .................. .001"One Rev. Range ......... .100"Total Range .............. 1.000"Dial Reading .............. 0-100

Starrett#25-441JPart No.

1-855-53295Reg. Net

Price $204.93

$17419

Electronic Indicators

FEATURES:• Floating zero.• Manual ON/OFF.• Dial Face: 2-1/4"• Tolerance indicators.• Carbide tipped point.• Resolution: .0005" (.01mm)• Direct inch/metric conversion.• Absolute/incremental reading.• Lugback & 3/8" stem mountings.

Low Cost, High Quality,Multi-Function Indicators

$130.06140.04

Part No. Reg. Range 54-520- Net Price

0-.5" (0-12.5mm)0-1" (0-25mm)

-255-250

$104.05112.03

SALE!

Indicator Extension Points

Use to gain extra length. 7/32" diameter points have 4-48 internal and 4-48 external threads.Made of corrosion resistant 303 stainless steel.

Part No. Length 1-850-

1/2" 3/411-1/41-1/21-3/42

-Z9391SS-Z9392SS-Z9339SS-Z9393SS-Z9343SS-Z9394SS-Z9340SS

$4.504.966.367.447.057.216.82

ONLY!

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

TOOLROOM ACCESSORIES

22

Oil Hardening Drill Rods 36" Length

GroundDrill Rods.0-1 Quality Non-Distorting

Tolerance: Plus or Minus .0005"

METRIC SIZES

$4.234.865.286.688.449.19

11.0913.3516.4420.2423.2626.4630.5835.0438.5144.1549.6453.8146.7951.6859.4660.2367.2573.04

Size Decimal Part No. (mm) Equiv. Inches 1-950M

2 0.0787 3 0.1181 4 0.1575 5 0.1969 6 0.2362 7 0.2756 8 0.3150 9 0.3543 10 0.3937 11 0.4331 12 0.4724 13 0.5118 14 0.5512 15 0.5906 16 0.6299 17 0.6693 18 0.7087 19 0.7480 20 0.7874 21 0.8268 22 0.8661 23 0.9055 24 0.9449 25 0.9843

-002-003-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020-021-022-023-024-025

ONLY!

FRACTIONAL SIZES

$3.423.744.114.324.154.915.185.545.326.787.277.777.048.509.219.668.95

11.2712.13

Part No. Part No. Size 1-950- Size 1-950-

1/16" 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32

23/64" 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32

-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020-021-022

-023-024-025-026-027-028-029-030-031-032-034-036-038-040-042-044-046-048-050

ONLY! ONLY!$13.52

11.9815.5016.6318.1118.6220.8421.3323.8020.2725.7728.9332.1930.6639.0042.7646.8843.1842.64

13/16 27/32 7/8 29/32 15/16 31/32 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-5/8 1-3/4 2

-052-054-056-058-060-062-100-104-108-112-116-120-124-128-132-140-148-200

$47.4150.3645.3558.8861.9966.5159.8775.8278.1295.0092.72

111.18108.40133.21127.83163.23189.42215.53

Part No. Size 1-950- ONLY!

171 Pc. Heat Shrink Tube Assortment

Part No. 1-928-45238Reg. Net Price $19.56

$1663

FEATURES:• UL Approved Polyefin heat shrink tubes.• Operating Temperature: -67 ~ 257°F (-55 ~ 125°C).• Shrink Temperature: Starts at 158°F (70°C).

Ends at 230°F (110°C).• 2:1 Shrink Ratio.• Maximum Electrical Rating: 600 Volts.

SET INCLUDES:• Green (25) 5/64" x 1-3/16" (2 x 30mm) (7) 15/32" x 3-9/16" (12 x 90mm) • White (25) 5/64" x 1-3/16" (2 x 30mm) (6) 15/64" x 2-3/8" (6 x 60mm) (11) 5/16" x 3-9/16" (8 x 90mm)• Red (25) 5/64" x 1-3/16" (2 x 30mm) (8) 13/64" x 2-3/8" (5 x 60mm) • Black (25) 5/64" x 1-3/16" (2 x 30mm) (10) 3/16" x 2-3/8" (4.5 x 60mm) (1) 25/64" x 39-3/8" (10 x 1M) • Blue (10) 5/32" x 2-3/8" (4 x 60mm) (11) 23/64" x 3-9/16" (9 x 90mm) • Yellow (7) 23/32" x 3-9/16" (18 x 90mm)

22 Pc. Large DiameterDual-WallHeat Shrink Tube Assortment

Part No. 1-928-45209Reg. Net Price $45.66

$3881

FEATURES:• Dual Wall.• Waterproof Polyefin heat shrink tubes.• Operating Temperature: -49 ~ 257°F (-45 ~ 125°C).• Shrink Temperature: Starts at 158°F (70°C). Ends at 248°F (120°C).• 3:1 Shrink Ratio.• Maximum Electrical Rating: 600 Volts.

SET INCLUDES: • Black: (5) 1/2" x 6" (12.7 x 152mm) (2) 3/4" x 6" (19.1 x 152mm) (4) 1" x 3" (25.4 x 76mm) • Red: (5) 1/2" x 6" (12.7 x 152mm) (2) 3/4" x 6" (19.1 x 152mm) (4) 1" x 3" (25.4 x 76mm)

FEATURES:• No more carbonaceous packing to bother with.• For use in any type furnace.• Promotes fast heating and cooling of tool parts.• No special controls or conditions required.

Stainless Steel Tool Wrap

Permits scale-free heat treating of tool steel in less time and at lower cost. Recommended for any air-hardening operation.

Made ofType 321soft annealed stainless steel.

$222.02392.12

Part No. Reg. Size 1-958- Net Price

50’ Long x 12" Wide50’ Long x 24" Wide

-20310-20110

$188.72333.30

SALE!

Simple To Use, Easy To Store.

.002"Thickness

Machinist Clamping SetSET INCLUDES:• (6) T-slot Nuts• (6) Flange Nuts• (4) Coupling Nuts• (6) Step Blocks• (6) Serrated End Clamps• (24) Studs, 4 each: 3", 4", 5", 6", 7", 8" lg.

Table T-Slot Size: 5/8"Stud Size: 1/2-13

Part No. 1-904-20402Reg. Net Price $103.14

$8251

Supplied with a plastic case.

Packaged Steel Shim Stock

This handy shim stock comes ready packagedin dispenser cartons for easy use. Saves time, waste and bother. Precision-gauged for accuracy.

A full hard, cold rolled, low carbon 1008-1010. This is also a Branded™ Shim.

6" x 100" STEEL ROLLS

Part No. Reg. Thickness 1-955- Net Price

-A1-A1X-A2-A2X-A3-A3X-A4-A5-A6-A7-A8

.001"

.0015

.002

.0025

.003

.0035

.004

.005

.006

.007

.008

Part No. Reg. Thickness 1-955- Net Price

-A9-A10-A12-A13X-A15-A16X-A18-A20-A22-A25-A31

$12.8313.0612.7615.9112.0812.9016.4913.7214.3014.6515.44

.009"

.010

.012

.0135

.015

.0165

.018

.020

.022

.025

.031

$10.9111.1010.8513.5210.2710.9714.0211.6612.1612.4513.12

$16.5219.8511.3411.9012.2313.0611.7010.7510.0710.5110.40

NOW!NOW!$19.44

23.3513.3414.0014.3915.3713.7712.6511.8512.3712.23

Major Credit Cards Accepted: 23Subscribe @ KBCTools.com to Get Exclusive Email Offers.

TOOLROOM ACCESSORIES

B

D F

E

C

A

CASE HARDENEDBLACK OXIDE FINISHTEETH MATCH ALL STEP BLOCKS

B

D F

E

C

A

SerratedEnd Clamps

$14.8922.0326.4518.8225.8831.17

Stud Size Part No. Reg. A B C E 1-903- Net Price

-30504-30505-30506-30507-30508-30509

2-1/2" 1-1/8" 1/2" 1/2" 4 1-1/4 3/4 1/2 6 1-1/4 7/8 1/2 2-1/2 1-1/4 5/8 5/8 4 1-1/2 3/4 5/8 6 1-1/2 7/8 5/8

$11.9117.6221.1615.0620.7024.94

SALE!

Black Oxide Finish

Driver TypeStuds

$2.092.202.282.252.282.392.412.742.852.983.073.153.313.47

Part No. Thread Length 1-903-

-40704-40705-40706-40707-40708-40709-40710-40804-40805-40806-40807-40808-40809-40810

1/2"-13 3" 1/2-13 3-1/2 1/2-13 4 1/2-13 4-1/2 1/2-13 5 1/2-13 5-1/2 1/2-13 6 5/8-11 3 5/8-11 3-1/2 5/8-11 4 5/8-11 4-1/2 5/8-11 5 5/8-11 5-1/2 5/8-11 6

ONLY!

FEATURES:• Self-positioning, single component design.• Swivel rocker attached body - prevents loss.• Strong, ductile iron body.• Instant set-up and eliminates shim stock.• Wide clamping range - instant adjustment to 5".

RiteHite Self-Positioning Hold Down Clamping System

Model Stud Clamping Load Part No. Reg. No. Size Height Dimensions Limit (lbs.) 1-820B- Net Price

3/8" 1-1/4" 1-1/8"x 3-1/2" 10,000 1/2 2-1/2 1-7/16 x 5-3/4 12,800 5/8 3-1/2 1-7/8 x 6-3/4 18,000 3/4 5 2-1/8 x 9 24,000 1 5 2-7/8 x 11-1/8 65,000

-049-050-051-052-053

375L500L625L750L1000L

$42.5849.1665.19

100.79183.04

SALE!$38.32

44.2458.6790.71

164.74

Vertical Handle Hold-DownToggle Clamps

COMPANYA DOVER

Supplied withspindle assembly.

Height Holding Overall Under Overall Capacity Part No. Reg. Model Height Base Length (lbs.) 1-910- Net Price SALE!

$19.2420.1820.1826.3739.43

201-U 2-7/8" 5/8" 2-1/8" 100 202 3-3/4 15/16 2-9/16 200 202-U 3-15/16 15/16 2-9/16 200 207-U 5-1/2 1-1/4 3-7/8 500 210-U 7-1/2 1-11/16 5-1/2 750

-52010-52020-52026-52070-52100

-U "U" Shaped Holding Bar

$16.3517.1517.1522.4133.52

FEATURES:• V-grooved anvil allows secure holding of all materials including rounds, squares and flats.• Drop forged, regular duty with extra deep throat.• Innovative frame geometry for maximum strength.• Copper plated spindle and Perma-pad® are for resistance to welding spatter and corrosion, and are replaceable.

400P Series™ Spark-Duty™ Drop ForgedC-Clamps

$40.2858.8889.90

111.76160.36

0"- 3" 2-1/2" 5/8" 0 - 4-1/4 3-1/4 3/4 0 - 6-1/16 4-1/8 3/4 0 - 8-1/4 5 3/4 2 - 10-1/8 6 3/4

-14229-14243-14257-14271-14285

Throat Spindle Part No. Reg. Capacity Depth Diameter 1-550- Net Price SALE!

$34.2450.0576.4195.00

136.30

KANT-TWISTUniversal Clamps

FEATURES:• Floating jaws that always stay parallel.• Built-in V-blocks for round or rod stock.• Designed to eliminate distorting or twisting action.• Copper plated jaws & screws are ideal for welding.

Combine The Best Features Of Ordinary C-Clamps & Parallel Clamps!

Max. Throat Rated Part No. Reg. Size & Style Opening Depth Load 1-532- Net Price

1" T Handle 1-1/16" 1/2" 350 2" T Handle 2 1-1/8 800 3" T Handle 3 1-1/4 1500 4-1/2" D - Deep Throat 4-1/2 2-1/4 1700 6" T Handle 6 2-1/8 2000 6" D - Deep Throat 6 4-1/2 2000

-401-405-410X-415-420-421

$23.1728.2940.6943.1763.9472.08

$20.8525.4636.6238.8557.5564.87

NOW!

Steel Step Blocks Steel-Black Finish

-40102-40103-40104

-40105-40106-40107

3/4 to 1-5/8" 1-1/8 to 2-1/2 2-1/2 to 6

1-3/4 to 4 2-1/2 to 6 3-1/2 to 9

Height Part No. Reg. Adj. Range 1-903- Net Price

$7.119.66

24.55

17.6334.4862.33

$6.048.21

20.87

14.9929.3152.98

NOW!1" WIDE

1-1/2" WIDE

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

MACHINERY

24

Model 2FSMPart No.2-002-2FSM

$81000

2" x 48"Belt Sander1/2 HP, 115V, 1 PHBALDOR Motor

FEATURES:• Tilting table.• Rubber contact wheel for positive drive.• Full hinged guard for quick belt change.• Belt Speed: 3,450 RPM.

ModelKC-790FX-DCPart No. 6-125-006-DC

$1,64900

FEATURES:• Two step activation safety switch with line voltage interruption in case of power failure.• Heavy-duty cast iron tilting tables and body.• Sanding belt operates vertically, horizontally or at any set angle in between.• Belt and disc safety guards.• Quick-release lever for easy belt replacement.

Disc & Belt SanderWith Built-In Dust Collector1-1/2 HP, 220V, 1 PH

fullYear

Warranty2

FEATURES:• Motor is all sealed ball bearing construction.• Easy belt tracking system for quick changing of belts.• Handles all your finishing operations (sanding, surfacing,

grinding, cleaning & deburring on wood, metal & plastic).• Comes with adjustable tilting table.

Disc & Belt Sander1/3 HP, 115V, 1 PH

ModelKC-705L-6

Part No.6-125-002

$14999SPECIFICATIONS:Belt Lift ............................................................... 0° - 90°Belt Size / Speed ........................ 4" x 36" / 2,000 SFPMDisc Size / Speed .................................6" / 3,450 SFPMMotor ................................................................ 5.2 AmpDimensions (L x W x H) .......................... 17" x 14" x 11"Shipping Weight .................................................. 42 lbs.

fullYear

Warranty2

SPECIFICATIONS:Bending Length ......................... 48-1/4"Capacity (mild steel) .................. 16 GA.Finger Widths ......................... 2, 3, & 4"Front to Rear Beam Adjustment ..... 5/8"Max. Depth of Box ............................. 4"Max. Lift of Beam ......................... 1-1/4"Min. Flange In Cap. Material ............. 1"Min. Reverse Bend ......................... 1/4"Weight ....................................... 580 lbs.

48" 16-GaugeBox and Pan BrakeWith Floor Stand

FEATURES:• 2", 3", and 4" wide fingers can be arranged to bend the material where needed.• All welded steel construction.• Bronze bearings at pivot points.

fullYear

Warranty3

ModelHBU48-16Part No. 6-700-040

$2,69500

fullYear

Warranty3 SPECIFICATIONS:

Back / Front Gauge Range ......................... 30" / 37"Max. Cutting Length ..................................... 52-1/4"Dimensions (less gauge) .................. 61" x 36" x 42"Floor Space, Gauges in Position ............... 60" x 80"Weight ...................................................... 1,100 lbs.

FEATURES:• Shear frame, bed and cutter head constructed of heavy-duty cast iron.• Upper and lower shear blades with unique adjustment features.• Double-locking back gauge with embossed scales and vernier wheels for fine adjustment standard.

52" 16-GaugeFoot Squaring Shear

Model 52Part No. 6-700-010

$4,49500FINANCE AS LOW AS107.13/mo.CALL FOR DETAILS

Complete with Hi-CarbonHi-Chrome

Steel Blades.

FEATURES:• Can be switched from

horizontal to vertical.• Table can be switched from disc

side to belt side and tilts 45o right and left.

• Heavy-duty cast iron construction.

SPECIFICATIONS:Belt Size / Speed ..................... 6" x 48" / 1,250 SFPM Disc Size / Speed .............................. 9" / 1,740 RPMDimensions ......................................... 30" x 19" x 56"Weight .......................................................... 145 lbs.

fullYear

Warranty2

Disc & Belt Sander1 HP, 115V, 1 PH

ModelKC-760LPart No.6-125-003

$47999

COMPLETE WITH:• Miter guage.• 2-1/2"-4" dust chute adapter.• Sturdy enclosed cabinet stand.

FEATURES:• Adjustable tilting tables with mitre gage.• Direct-drive motor for efficient operation and compact design.• Easy belt tracking system for fast adjustments and belt replacement.

SPECIFICATIONS:Belt Size / Speed ................. 1" x 30" / 2,000 SFPMDisc Size / Speed ........................... 5" / 2,800 RPMDimensions .......................... 14-1/2" x 12-1/2" x 14"Weight .......................................................... 20 lbs.

ModelKC702CPart No.6-125-001

$13999

Disc & Belt Sander1/4 HP, 115V, 1 PH

fullYear

Warranty2

fullYear

Warranty2

SPECIFICATIONS:Belt Size / Speed .. 6" x 48" / 2,250 SFPMDisc Size / Speed .......... 12" / 1,750 RPMDust Collector Motor ....... 1/4 HP, 2/1 AmpOverall Dimensions .... 35" x 25" x 56-1/4"Shipping Weight .......................... 280 lbs.

Major Credit Cards Accepted: 25Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MACHINERY14-1/2" Capacity Gravity FeedVertical Saw1 HP, 115/230V, 1 PH

FEATURES:• Accurate gravity feed with hydraulic

speed control and depth stop.• Rugged simple construction for easy maintenance and long service life.

Model EF-1459Part No. 6-398-005

$8,29500FINANCE AS LOW AS$187.38/mo.CALL FOR DETAILS

SPECIFICATIONS:Blade Size ............................. 120" x 1/4 - 3/4"Blade Speed (4) .........................70-525 SFPMCutting Cap. Height / Width .... 14-1/2" / 8-3/4"Max. Blade Travel ....................................... 9"Overall Dimensions ........... 35" x 25" x 56-1/4"Table Size .................................. 18-1/2" x 30"Weight ................................................ 700 lbs.

FEATURES:• Low 52 RPM blade speed is ideal for cutting ferrous metals.• Mitering head pivots to the right or left positive stops at 45o & 90o.• Quick action clamping vice secures workpiece.• Control handle with integrated safety trigger.

12" Slow-SpeedCold Saw4-1/2 HP, 220V, 1 PH

Complete withSide Roller,

Anti-Splash Guards, Coolant System,

Workshop Assembly.

SPECIFICATIONS:Cutting Capacity Pipe 45o / 90o ........................... 3-1/2" / 4" Square 45o / 90o ... 3" x 3" / 3-1/4" x 3-1/4" Round 45o / 90o ........................ 2" / 2-3/8"Coolant Pump / Tank ............. 1/8 HP / 5 gal.Blade Size / Speed ................... 12" / 52 RPMDimensions ............................. 40" x 39" x 72"Weight ............................................... 385 lbs.

Model KC-315CSPart No. 6-125-036

$2,79900

FINANCE AS LOW AS $66.71/mo.CALL FOR DETAILS

MODEL KC-712BC FEATURES:• Hydraulic feed control.• Built-in coolant system.• Portable - Take this machine to the job and plug it in.• Shipping Weight: 350 lbs.

MODEL KC-712GH-5 FEATURES:• Hydraulic feed control.• Built-in coolant system.• Direct gear drive of blade wheel.• Portable - Take this machine to the job and plug it in.• Shipping Weight: 355 lbs.

7" x 12" Horizontal/Vertical Bandsaws

Model KC-712BCPart No. 6-125-041

$1,39900

Model KC-712GH-5Part No. 6-125-042

$1,99900

SPECIFICATIONS:Blade Size .................... 3/4" x 93"Capacity ............ 7" • / 7" x 12" ❚Blade Speeds ... (4) 85-235 SFPMMotor ............... 1 HP, 110V, 1 PHSpindle Speeds .. 70 - 4,200 RPM

MODELKC-712GH-5with GearDrive

fullYear

Warranty2

Complete with Wheel Kit,Saw Blade, Vertical Work

Table, Manual & Parts List.

10" x 18" Horizontal Bandsaw

FEATURES:• Powerful 2 HP drive motor.• Infinitely adjustable hydraulic feed control.• Built-in coolant system.• Precision dial gage display for proper blade tensioning.

SPECIFICATIONS: Round Capacity at 45o / 90° ................ 10"Rectangular Capacity at 90° ...... 10" x 18"Rectangular Capacity at 45° ....7" x 9-3/8"Blade Size .................................. 1" x 122"Blade Speed (4) ............. 114-377 SFPMShipping Weight ...........................925 lbs.

fullYear

Warranty2

ModelKC227-2(2 HP, 230V, 1 PH)Part No. 6-125-044

(2 HP, 575V, 3 PH)Part No. 6-125-044C

$4,49900FINANCE AS LOW AS$107.23/mo.CALL FOR DETAILS

17" V.S. Metal/Wood Cutting Bandsaw 2 HP, 220V, 3 PH

SPECIFICATIONS:Cutting Cap. Height / Width .... 12" / 16-1/4"Table Size .............. 23-1/2" x 17" x 37-1/2"Blade Size ...................... 131-5/8" x 1/8"-1"Height to Cut ......................................... 12"Speed Var. (wood) ......... 540-3,600 SFPMSpeed Var. (metal) ............. 100-650 SFPMWeight ........................................... 440 lbs.

fullYear

Warranty2

FEATURES:• (2) 4" dust chute for dust collector hook-up.• Variable frequency drive speed control &

digital display for blade speed in feet/min.• Cast-iron table tilts 5o left/45o right.

Model KC-1700WM-VSPart No. 6-125-169

$3,79900FINANCE AS LOW AS $90.55/mo.CALL FOR DETAILS

Complete with a 1/2" x 6 TPI Wood Cutting Blade, a 1/2" x 10 TPI Metal Cutting Blade,

Laser Guide, Work Lamp, Miter Gauge,and Precision "TRU-RIP" Aluminum

Rip Fence with resaw guide.

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

MACHINERY

26

with Purchase ofany Surface Grinder

5 Gallon Pailof GRINDZALTM

Pure SyntheticGrinding CoolantPart No. 1-123-065

$$1154.0754.07 Value!Value!

FREE

3-Axis Auto Feed Surface Grinders

Model SGS-1230AHD(12" x 30" Cap.)14" x 1-1/4" x 5" Wheel(5 HP, 230/460V, 3 PH)Part No. 6-273-020

$38,99500FINANCE AS LOW AS $831.76/mo.CALL FOR DETAILS

Model SGS-1640AHD(16" x 40" Cap.)14" x 2" x 5" Wheel(7-1/2 HP, 230/460V, 3 PH)Part No. 6-273-025

$56,99500FINANCE AS LOW AS $1,149.59/mo.CALL FOR DETAILS

COMPLETE WITH:• Electric chuck.• Dust-suction coolant.• Overhead parallel dresser.• Auto. lubrication system.• Wheel balancing base and arbor.

SPECIFICATIONS:Bed Width ....................................... 9"Distance Between Centers ........... 40"Spinde Bore ........................... 1-9/16"Spindle Speed (2) ...... 50-2,570 RPMSwing Over Gap / Bed ... 20" / 13-3/8"Thread Cutting Range Standard (45) ................. 2-72 TPI Metric (39) .................... 0.2-14mm Tailstock Taper ........................... 3MTWeight .................................2,440 lbs.

FEATURES:• Cast-iron machine bedways and base.• Removable chip pan for easy cleaning.• ISO 9001 Certified Factory.

13" x 40" Heavy-Duty Precision Lathe 5 HP, 230V, 3 PH

COMPLETE WITH:• 7" 3-Jaw chuck & guard.• Steady and follow rest.• 4-Way indexable toolpost.• Coolant system with full length rear splash guard.• Halogen work light.

ModelTRL-1340Part No.6-273-058

$16,99500FINANCE AS LOW AS $370.15/mo.CALL FOR DETAILS

Part No.6-273-058-N3

$20,69500FINANCE AS LOW AS $445.74/mo.CALL FOR DETAILS

Complete with

NMS-300 Digital ReadoutINSTALLED!

FEATURES:• Line interruption switch system needs a restart after a power failure.• Guideway and gears in headstock are all hardened and precision ground.• Safety guard with limit switch protection.

Model KC1236MLPart No. 6-125-063

$4,69900

12" x 36"GearheadMetal Lathe1-1/2 HP, 220V, 1 PH

COMPLETE WITH:• 6" 3-Jaw Chuck• 8" 4-Jaw Chuck• 1/2" Drill Chuck• Thread Chasing Dial Indicator• 3MT Dead Center• 3MT Arbor Taper

• 10" DI-4 Camlock Face Plate• Steady & Follow Rest• Imperial & Metric Gears• Quick-Change Toolpost• Full Length Splash Guard• Chuck & Hex Keys

FINANCE AS LOW AS$112.00/mo.CALL FOR DETAILS

14" x 40" GearheadMetal Lathe2 HP, 220V, 1 PH

FEATURES:• 4-way power feed of apron & crosslide.• Combination inch/metric graduated dials.• Lathe chuck safety guard automatically shuts lathe off when lifted.• Gearhead spindle drive with hardened and ground gears.• Bed ways are hardened and precision ground.

SPECIFICATIONS:Bed Width .................................. 7-5/16"Cross Slide Travel ..................... 6-3/16"Distance Between Centers .............. 40"Threads Inch (34) ............................4-56 TPI Metric (26) ....................... 0.4-7mmSpindle Speeds (8) ........ 70-2,000 RPMSpindle Taper ................................ 5MTTailstock Taper .............................. 3MTSwing Over Bed ................................ 14"Swing Over Cross Slide ............... 8-5/8"Weight ................................... 1,375 lbs.

6" x 18"Surface Grinder2 HP, 230V, 3 PH

Model KGS-618MPart No. 6-273-003

$12,99500

FEATURES:• 6" x 18" permanent magnetic chuck.• Double "V" saddle ways, H-frame column design, and heavyweight construction.• Cartridge spindle with ABEC-7 precision spindle bearings.• Oversize spindle housing and flange mount design.

SPECIFICATIONS:Crossfeed Handwheel Graduation .............................. 0.0005" Revolution ................................. 0.100"Downfeed Handwheel Graduation ............................ 0.00020" Revolution ................................. 0.050"Distance Spindle to Table ........................ 21"Table Travel ........................... 8-1/2" x 19-1/2"Table Size .......................................... 6" x 18"Wheel Size ............................ 8" x 3/4" x 1-1/4"Spindle Speed ...............................3,450 RPMWeight ............................................ 2,500 lbs.

FINANCE AS LOW AS $285.88/mo.CALL FOR DETAILS

COMPLETE WITH:• Flood coolant system.• Grinding wheel and wheel mount.• Wheel balancing base and arbor.• Table mount diamond

wheel dresser.• Leveling pads.• Toolbox with tools.• One-shot lubrication.

More Information@ KBCTools.com

FEATURES:• Rapid spindle travel up/down.• Variable Power Chuck Control.• Solid state electric control for variable electric cross feed.• Extra wide double "V" saddle ways lined with Turcite® for smooth travel and long life. • Precision cartridge type spindle with ABEC class 7 angular contact ball bearings.• One piece cast base for rigidity & absorption of vibration.

Major Credit Cards Accepted: 27Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MACHINERY

DON'T SEE THE MACHINE YOU NEED? Shop KBCTools.com or email us with your

specific needs at machinery@KBCTools.com.

Model KC-1640ML(230V, 3PH)Part No. 6-125-064

(575V, 3PH)Part No. 6-125-064C

$12,99900FINANCE AS LOW AS$285.97/mo.CALL FOR DETAILS

16" x 40" High PrecisionToolroom Metal Lathe

FEATURES:• 4-way power feed of apron and cross-slide.• Bed ways are hardened and precision ground.• Powerful 4 HP drive motor.• Gearhead spindle drive with hardened & ground gears.• Combination inch/metric graduated dials.• Lathe chuck safety guard automatically shuts lathe off when lifted.• 16 Spindle Speeds, 45-1,800 RPM.• Shipping Weight: 3,250 lbs.

fullYear

Warranty2

COMPLETE WITH:• 12" 4-jaw chuck.• 8" 3-jaw chuck.• Work light.• E-stop button.

• Full-length rear chip guard.• Coolant system.• Thread dial indicator.

Shown with Newall NMS-300 DRO System.

HeaviestHeavy-Duty13" LatheAvailable!

Model KLS-2260C(22" x 60")

Part No. 6-273-067

$27,59500FINANCE AS LOW AS$588.60/mo.

Part No. 6-273-067-N3

$29,59500FINANCE AS LOW AS$631.26/mo.

Model KLS-2280C (22" x 80")

Part No. 6-273-068

$29,19500FINANCE AS LOW AS$622.73/mo.

Part No. 6-273-068-N3

$31,89500FINANCE AS LOW AS$680.32/mo.

Complete with

NMS-300 or DP-700 Digital ReadoutINSTALLED!

Model KLS-26120C (26" x 120")

Part No. 6-273-069

$34,99500FINANCE AS LOW AS$746.44/mo.CALL FOR DETAILS

Part No. 6-273-069-N

$40,99500FINANCE AS LOW AS$874.42/mo.CALL FOR DETAILS

Supplied withNewall DP-700 Digital Readout

Big 4" Spindle Bore,Clutch Spindle Drive &4-Way Rapid Traverse.

Large BoreEngine Lathes10 HP, 230/460V, 3 PH

SPECIFICATIONS:Swing Over Bed ............................. 22" / 26"Swing Over Cross Slide ............ 12.5 / 16.5"Swing Over Gap ............................. 30" / 34"Distance Between Centers ....60" / 80" / 120"Spindle Speed (Range 12) ..... 36-1600 RPMSpindle Nose/ Spindle Bore ........ D1-8/4.12"Threads Standard (32) ................... 2-28 TPIThreads Metric Pitch (22) ................ 1-14mmTailstock Quill Travel/Taper ............ 6" / 5MTNet Weight ............ 7,480 / 8,480 / 9,650 lbs.Shipping Weight . 7,900 / 8,900 / 10,200 lbs.

FEATURES:• Safety foot brake.• Clutch style headstock.• Inch dials and leadscrews.• Jog button, 4-way rapid traverse.• D1-8 camlock, 4.12" spindle bore.• Centralized lube system in headstock.• Hardened & ground gears & bedways.

COMPLETE WITH:• 12" 3-Jaw Chuck.• 16" 4-Jaw Chuck.• 20" Face Plate.• Work Light.• Standard Tools.• 8" Steady Rest.

• 1-3" Follow Rest.• 4-way Tool Post• Thread Chasing Dial.• Coolant System• Full-Length Splash Guard.

fullYear

Warranty2

fullYear

Warranty2

Model KC1440ML-6

Part No. 6-125-062

$5,99900FINANCE AS LOW AS$135.51/mo.

CALL FOR DETAILS

NOW ONLY!

SAVE $500!PRICE REDUCED

Was $6,499.00WHILE SUPPLIES LAST.

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

MACHINERY

28

ModelKC-108CPart No.6-125-019

$9999

SPECIFICATIONS:Drill Chuck & Arbor ..................... 1/2"Max. Distance Chuck to Base .......10"Max. Distance Chuck to Table ........7"Speeds (5) .................620-3,100 RPMSpindle Taper / Travel .......JT #33 / 2"Shipping Weight ...................... 41 lbs.

8" Bench Drill Press115V, 1 PH

fullYear

Warranty2

OptionalFloor Stand Part No.6-125-030S $27999

Milling Drilling Machine220V, 1 PH

SPECIFICATIONS:Drilling Capacity ........................................ 1-1/4"Max. Distance Spindle Nose to Table ...... 18-7/8"Swing ....................................................... 16-1/2"Spindle Taper / Stroke ............................... R8 / 5"Diameter of Column ................................... 4-3/4"Speeds (12) ............................... 150-2,500 RPMFace Mill / End Mill Capacity .................. 3" / 3/4"Max. Longitudinal Travel ............................... 17"Cross Travel .............................................. 7-1/4"Working Area of Table ................ 8-1/4" x 28-3/4"Size of T-Slot on Table ................................. 5/8"Dimensions (L x W x H) ............... 43" x 39" x 42"Shipping Weight ..................................... 675 lbs.

fullYear

Warranty2FEATURES:• Table control hand wheels

have large micrometer dials graduated in .001" .

• Head swivels 360° and is easily raised and lowered.• Spindle is equipped with

four heavy-duty tapered roller bearings.

ModelPDM-30Part No.6-125-030

$2,29900

Complete with3" Face Cutter,

1/2" Chuckwith Key, 3-1/2"Angle Vise, and Safety Guard.

9" x 49" Turret Milling MachinesSPECIFICATIONS:Longitudinal Travel Manual Model ......... 35"Longitudinal Travel w/ Power Feed ........ 31"Cross Travel / Knee Travel ............. 12" / 16"Table To Spindle min-max. ........... 0-18-3/4"Spindle To Column at 90° ....... 6-3/4"-18-3/4" Speeds (Var.) ....................... 70 - 4,200 RPMSpindle Taper ......................................... R-8Power Quill Feeds (per rev.) ................ .0017"/.0032"/.0053" Quill Travel ................................................ 5"Spindle Motor Step Pulley ... 3 HP, 230V or 575V, 3 PHShipping Weight ........................... 2,700 lbs.

3 HP Variable Speed Head!

Shown with Newall NMS-300 andKBC Table Feed

ModelTUM-1VS (230V, 3 PH)Part No. 6-265-007

(575V, 3 PH)Part No. 6-265-007C

$10,99500FINANCE AS LOW AS$241.88/mo.CALL FOR DETAILS

Complete with

NMS-300 2-AxisDigital Readout& Table FeedINSTALLED!

(230V, 3 PH) Part No. 6-265-007-N3

(575V, 3 PH) Part No. 6-265-007C-N3

$12,99500FINANCE AS LOW AS $285.88/mo.CALL FOR DETAILS

10" x 54" CNC Vertical Milling MachinesWith 3-Axis Acu-RiteG2 CNC Control

FEATURES:• 3 HP, 3 PH Motor• 10" x 54" hardened and ground table with precision hardened ground ways.• Acu-Rite G2 CNC control is easy to learn & simple to use.• Control features canned cycles for all regular milling and drilling jobs, just fill-in the blanks to complete a program.

SAVE $2,500!PRICE REDUCED

Was $43,495.00

ModelKBC-3VS-G23 (230V, 3 PH)Part No. 6-265-006-G23

(575V, 3 PH)Part No. 6-265-006C-G23

$40,99500

FINANCE AS LOW AS$874.42/mo.CALL FORDETAILS

• Reliable mechanical V.S. Mill head delivers full torque over entire speed range.• Heavy-duty box ways on knee and column with extra wide saddle for added rigidity.• Shipping Weight: 3,200 lbs.

Model KC-40HC(220V, 1PH) Part No. 6-125-024(575V, 3PH) Part No. 6-125-024C

$4,99900FINANCE AS LOW AS $119.15/mo.CALL FOR DETAILS

21" Gear HeadHeavy-DutyDrill/Mill Machine

FEATURES:• Rapid & fine manually operated quill feeds.• 2-speed instant reversing motor for tapping.• Heavy-duty t-slot work table with coolant trough.• Four heavy-duty tapered roller bearings.• Gear head direct- drive of spindle.

fullYear

Warranty2SPECIFICATIONS:Drilling Capacity ............................................ 1-1/4"Spindle Motor ........................................... 1-1/2 HPSpindle Speeds (6) ......................... 60-1,500 RPMSpindle Taper / Travel ................................. R-8 / 5"Spindle to Table Capacity ................. Up to 26-1/2"Diameter of Column ...................................... 4-1/2"Table Size ............................................ 23" x 7-1/2"Shipping Weight ........................................ 690 lbs.

Major Credit Cards Accepted: 29Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MACHINERY

17" & 22" Drill Presses

FEATURES:• Powerful 1 HP motor.• Drill chuck and key included.• Tilting table for angular drilling.• 22" drill has 5/8" t-slot on table.• Cast-iron pulleys reduce vibrations.• Spindle is supported by high quality ball bearings.• Light socket incorporated into drill press head.

ModelKC118FC17" Drill PressPart No. 6-125-022

$62500

ModelKC122FC22" Drill PressPart No. 6-125-023

$1,04900

SPECIFICATIONS: KC-118FC KC-122FCDrilling Capacity ................ 3/4" .......................... 1-1/4"Chuck size ......................... 5/8" ............................. 3/4"Swing .................................. 17" .............................. 22"Stroke ............................. 3-1/4" .......................... 4-3/4"Table Size .................... 13-3/4" ........ 18-3/4" x 16-1/4"Spindle taper ................... 2 MT ........................... 4 MTSpeeds (16) ..... 240-3,400 RPM ... (12) 150-4,200 RPMShipping Weight ......... 215 lbs. ....................... 360 lbs.

MODELKC-122FC

fullYear

Warranty2

MODEL TUM-3VS Shown with Newall NMS-300 and KBC Table Feed.

MODEL TUM-40VS 5 HP Motor, #40 NST Spindle Taper, Hardened & Ground Square Ways on Knee and Column.

10" x 54" Heavy-DutyMilling MachinesSPECIFICATIONS: TUM-3VS TUM-40VSTable Size .......................... 10" x 54" ....................... 10" x 54"Longitudinal Travel Manual ....... 32" ................................ 32" with Power Feed ................... 28" ................................ 28"Cross Travel ............................... 16" ................................ 16"Knee Travel ................................ 16" ................................ 16"Spindle Speeds ..... 70 - 4,200 RPM .......... 70 - 4,200 RPMSpindle Taper .............................. R8 .......................... NST40Quill Travel .................................... 5" .................................. 5"Spindle Motor ................. 3 HP, 3 PH ................... 5 HP, 3 PHVoltage ............... 230/460V or 575V ..... 230/460V or 575VShipping Weight ............... 3,500 lbs. ..................... 3,500 lbs.

Model TUM-3VS(230V, 3 PH) Part No. 6-265-006

(575V, 3 PH) Part No. 6-265-006C $12,49500FINANCE AS LOW AS$274.88/mo.

Model TUM-40VS (230V, 3 PH) Part No. 6-265-009

(575V, 3 PH) Part No. 6-265-009C

$13,99500FINANCE AS LOW AS$307.88/mo.CALL FOR DETAILS

(230V, 3 PH)Part No. 6-265-006-N3

(575V, 3 PH)Part No. 6-265-006C-N3

$14,25000FINANCE AS LOW AS$313.49/mo.(230V, 3 PH)Part No. 6-265-009-N3

(575V, 3 PH)Part No. 6-265-009C-N3

$15,75000FINANCE AS LOW AS$343.04/mo.CALL FOR DETAILS

Complete with

NMS-300 2-AxisDigital Readout& Table FeedINSTALLED!

with Purchase of any KBC Mill / DRO Package

$327.84$327.84Value!Value!

• 13 Pc. Collet Set (1-519-020)

• 52 Pc. Clamp Kit (1-904-20402)

• 10 Pc. End Mill Set (5-300T-050)

FREETOOLING

Complete with 1/2"Chuck, Safety Guard,and R8 Chuck Arbor.

SPECIFICATIONS:Max. Spindle Nose to Table ............... 13"Drilling Cap. (cast-iron/steel) ... 3/4" / 5/8"Swing ................................................. 13"Spindle Taper / Stroke .................. R8 / 2"Speeds (2-Variable) ................................................ 50-1,125 / 100-2,250 RPM/tr/minMax. Travel ..................... 18-7/8" x 6-7/8"Shipping Weight ......................... 285 lbs.

13" V.S. Bench Mill1 HP, 110V, 1 PH Motor withDigital Spindle Speed Indicator

FEATURES:• Micrometer dials graduated in .001" increments. • Four heavy-duty taper roller bearings.

fullYear

Warranty2

ModelKC-20VSPart No. 6-125-035

$1,99900

13" Drill Presses 1/2 HP with DualLaser Guide System

FEATURES:• 5/8" drill chuck and key included.• 45° tilting table for angular drilling.• Cast-iron pulleys reduce vibrations.• Comes with non-slip rubber feed handles.• Light socket incorporated into drill press head.• Spindle is supported by high quality ball bearings.• Locking depth stop for repetitive blind hold drilling.

SPECIFICATIONS: KC-116N KC-116FNChuck Size ......................... 5/8" ........................... 5/8"Swing ................................... 13" ............................ 13"Stroke .............................. 3-1/8" ........................ 3-1/8"Table Size ................. 12-13/16" .................. 12-13/16"Spindle Taper ................... 2 MT .......................... 2 MTSpeeds (16) ..... 220-3,600 RPM ........ 220-3,600 RPMShipping Weight ........... 145 lbs. ..................... 175 lbs.

ModelKC-116FNPart No.6-125-021

$37999

ModelKC-116NPart No.6-125-020

$32999

fullYear

Warranty2

FEATURES:• Powerful 2 HP spindle motor, 600V, 3 PH for mild steel.• Heavy-duty t-slot work

table with coolant through and built-in

coolant system.• Power quill feeds disengages at preset depth.

Model KC50Part No. 6-125-025C

$5,19900FINANCE AS LOW AS $117.44/mo.CALL FOR DETAILS

28" Variable Speed Gear Head Drill Press

SPECIFICATIONS:Variable Spindle Speeds (2) ........ 60-1,870 / 120-1,740 RPMDrilling Capacity ..................................... 1-1/2"Swing ................................................... 27-1/2"Table Size ........................................ 22" x 22"Spindle Taper / Travel ...................... 4 MT / 7"Max. Dist. Chuck to Table ......................... 26"Shipping Weight .............................. 1,310 lbs.

fullYear

Warranty2

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

SHOP SUPPLIES

30

6-Drawer Chest26" Wide

Model WCH-266BKColor: BlackPart No. 1-824-235Reg. Net Price $333.90

$30051

SPECIFICATIONS:Top Tray Dimensions .... 25.75" x 11.75" x 2.88"Overall Dimensions ............... 26" x 12" x 15.25"Capacity .................................................. 85 lbs.Weight ..................................................... 43 lbs.

Gas struts hold lid open during use.

Part No. 1-816G-1500Reg. Net Price $144.91

$11593

1500 Gun Vac®®

FEATURES:• 2X the power of a standard shop vacuum!• 1/4" NPT optional rear air inlet.• Comfortable contoured trigger.• Bag easily attaches to tapered rear outlet.• Internal stiffener keeps bag from sagging and wearing.• Tapered nose accepts standard 1-1/4" Vac® accessories.

Great for all types of cleaning: metal chips, plastic pellets, food crumbs, woodshavings, dirt and dust.

Serious cleaning power in the palmof your hands!

INCLUDES: Gun Vac®,9" Crevice Tool, & HighFiltration Collection Bag.

Shoulder Eye Bolts

Thread Shank Rated Part No. Reg. Size Length Cap. (lbs.) 1-904- Net Price

$6.356.94

7.088.27

7.5411.96

15.4319.50

25.47

1/4"-20 1" 500 5/16-18 1-1/8 900 3/8-16 1-1/4 1,300 7/16-14 1-3/8 1,800 1/2-13 1-1/2 2,400 5/8-11 1-3/4 4,000 3/4-10 2 5,000 7/8-9 2-1/4 7,000 1-8 2-1/2 9,000

-016-020-024-028-032-040-048-056-100

$5.726.25

6.377.44

6.7910.76

13.8917.55

22.92

SALE!

14" HorizontalRoller MaterialSupport Stand

FEATURES:• A clamping mechanism on the column allows for quick and easy height adjustments.• Chrome-plated, 2" x 14" ball-bearing roller head is designed to smoothly move up to 2,000 lbs. of flat stock.• Locking screws provide added safety. • Made of heavy-duty cast iron and steel.

Part No. 1-549-MSH14Reg. Net Price $289.85

$24637SPECIFICATIONS:Height ........... 23" to 38-1/2"Base .............. 15" x 16-1/2"Weight ..................... 47 lbs.

Part No. 1-816-001Reg. Net Price $14.65

$1245

600S-DLStandard TipCompletelytamper-proofnozzle. Designedfor maximum safety, maximum efficiencyand lowest cost. Supplied with 1/4" NPT femaleinlet thread and 1/8" female outletthread. Conforms to OSHA standardsfor noise levels and less than 30 PSIdead-ended pressure.

600S Safety Blow Gun

WorkForce® Rubber Air Hose Assemblies

50’ x 3/8"(HRE3850RD2)Part No. 1-914L-002Reg. Net Price $90.85

$7722

FEATURES:• VRMA Class C medium oil resistance inner tube.• Bend restrictors reduce wear, making hose last longer.

25’ x 3/8"(HRE3825RD2)Part No. 1-914L-001Reg. Net Price $52.00

$4420

Workforce® rubber hose assemblies are designed for a wide range of industrial, construction and agricultural applications. Featuring reinforced synthetic rubber tube and cover witha synthetic yarn weave for extra strength and flexibility.

SPECIFICATIONS:Working Pressure .......................................... 300 PSIMax. Burst Pressure ................................... 1,200 PSIBrass NPT Fittings ..................................... 1/4" MNPTI.D. Hose ............................................................... 3/8"Color ..................................................................... Red

6-Drawer Cabinet26" Wide

Model WCA-266BKColor: BlackPart No. 1-824-245Reg. NetPrice $690.00

$62100

SPECIFICATIONS:OverallDimensions ... 26.5" x 18" x 40.75"Capacity Ea. Drawer(ball-bearing slides) ............ 85 lbs.Weight .............................. 124 lbs.

Sturdy 5" x 2" casterssupport up to 1,100 lbs.

NEBO Redline® BLAST Flashlight

Part No.1-541-6542Reg. Net

Price $61.98

$5578

SPECIFICATIONS:Length Compacted .............. 7.25"Length Extended ................. 7.75"Diameter Barrel ................. 1.375"Diameter Head .................. 1.875"Weight ............................ 0.95 lbs.

With 1,400 lumens of high intensity light, this must-have flashlightcan throw a spectacularly bright beam over 260 meters. The BLASTis completely waterproof and ready for any weather condition.

The brightest flashlight ever created by NEBO!

High 1400 Medium 560 Low 140 Beacon 200 Strobe 1400

2.57

30120

6

260 M 180 90 — —

Run Time Viewing Mode Lumen (Hours) Distance

LIGHTING MODES

FEATURES:• Convex lens.• Tactical edge.• 4x adjustable zoon.• Rear-positioned, on/off button with Soft Touch Technology.

• Signature Red RingTM.• Anodized aircraft-grade

aluminum; waterproof (IPX7) & impact-resistant.

• Powered by 6 AA batteries (included).

770 PistolGrip Blow Gun

Part No. 1-816-014Reg. Net Price $19.60

$1666

Variable flow controland is lightweight.Conforms to OSHAstandards for noiselevels and less than 30 PSI dead-ended pressure. Suppliedwith a brass reinforced inlet, 1/4" FPT.

Major Credit Cards Accepted: 31Subscribe @ KBCTools.com to Get Exclusive Email Offers.

SHOP SUPPLIES

FEATURES:• "Double-shell" earcup technology.• Durable stainless steel headband resists bending

and warping and distributes weight for a low-pressure fit.• NRR: 30 dB

Peltor™ Optime™ 105Over-the-Head Earmuffs

Part No. 1-720-1018Reg. Net

Price $45.46

$3864

The 3M™ Peltor™ Optime™ 105 Over-the-Head Earmuffs have been developedfor effective hearing protection where noise exposures are expected to reach ashigh as 105 dBA. Features added mass and volume, plus a unique “double-shell”earcup design (2 cups connected via foam inner layer) toboost the noise reduction throughout the full range of lowand high frequencies. The lightweight headband worksin conjunction with earcup pivot points that tilt tomaximize wearer comfort. Soft, liquid & foamfilled cushions help the earmuffs fit comfortablyagainst the head to help provide an effectivenoise-blocking seal.

INCLUDES: Filter, Regulator, Lubricator, Drawbar, Extra Long Air Hoses, and All Mounting Hardware.

Maxi Torque-Rite® Power Drawbars

FEATURES:• Slim line design with powerful air cylinder delivers 40-50 ft./lbs. torque.• Designed specifically as a power drawbar attachment.• Virtually eliminates tools slipping in R8 collets on heavy cuts.• Less moving parts and o-rings to ensure years of trouble-free service.• Increases productivity by reducing

tool change time to just seconds.

Part No. Reg. For Use With 1-541- Net Price

R8 Spindle MillsNST 40 Spindle Mills

-090-095

$922.25922.25

$830.03830.03

NOW!

1 Year LimitedWarranty.

Sturdy, cast-iron construction. Removable,machined steel, 4-position anvil. Ruggedsteel ram is driven by a machined pinion.Base drilled for mounting on a bench or pedestal.

Arbor Presses

AP10: Equipped with handwheel to perform light and quick press work.

Max. Ram Force Work Dimns. Weight Part No. Reg. (Tons) Swing Height (SQ.) Height (lbs.) 1-549- Net Price

1.0 8" 6" 1" 11" 34 2.0 10-3/8 7-7/8 1-1/4 15-1/8 70 3.0 11-3/4 12-1/2 1-1/2 21 135

$207.70424.70666.50

-AP10-AP20-AP30

$176.55361.00566.53

SALE!

Delivers the heavy force needed forriveting, squeezing, punching, bending,and other pressing applications.

Pro Tram System

FEATURES:• Square the head of a milling machine quickly and easily.• To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same.• Guaranteed to be equal to or better than any other tramming method or spindle squaring device available.• Can be used with a sine bar or sine plate

to adjust the head to precise angles.• Calibration procedure accounts for any error introduced by worn collets.• Body made from red anodized aluminum.• Indicator Repeatability: 0.0002"• Indicator Graduation: 0.001"

1/2" Shank2.2" Indicator Faces

Part No. 1-811-01000Reg. Net Price $193.73

$17436INCLUDES: Calibration Gage,Manual Gage, and Padded Case.

Heavy Duty SeriesStatic ConvertersFor Light to Moderate Loads.

HOW TO ORDER SIZE:• The largest motor on your machine must fall within the minimum and maximum range of the converter.• Do not order a larger unit or heavy duty model thinking it will give you more horsepower.

WHEN TO USE HEAVY DUTY:• Heavy starting loads (lathes, flywheel driven equipment, etc.).• Instant reversing, frequent starting, jogging.• Air compressors (motor pulley must be reduced by 1/3 in diameter).

HEAVILY LOADED EQUIPMENT:• For pumps, fans, blowers, direct-drive compressors, or equipment requiring greater than 2/3 of its rated HP, you MUST USE A PHASE-A-MATICTM ROTARY CONVERTER.

GUARANTEED12 MONTHS AGAINSTMANUFACTURING DEFECTS.

Designed especially for running three-phase 220V Machine Tools & Motors on single-phase 220V power.

Model No. PAM-300-H.DH.P Range: 1 - 3

Part No. 1-835-008Reg. Net Price $302.25

$25691

Model No. PAM-600-H.DH.P Range: 3 - 5

Part No. 1-835-009Reg. Net Price $387.50

$32938

Runs motor loads only at 2/3 rated HP.

DIMENSIONS:Shield Size - 16" W x 8" HFlexbar Arm - 10" Length

FEATURES:• Flexbar arm permits setting of Visorguard at the correct height and angle for each setup.• Flip shield up to load part and down for machining.• Can be installed in minutes on CNC mills, conventional milling machines and others.• Special spring-loaded shaft makes shield stay put - no spring back.• Wing-shaped shield protects workers at adjacent machines.• Flexbar locks rigid; has stainless aircraft-grade tension cable.

VISORGUARD

Part No. 1-820-13055Reg. Net Price $271.25

$24413

INCLUDES: Mounting Bracket, Flexbar and All Hardware Including Mounting Hole and Thumbscrewfor Attaching Coolant System.

Provides CompleteProtection BetweenThe Cutting Tool &

The Operators Eyes!

XLXL

Yukon® & Yukon® XL Clear Uncoated Lens Safety Glasses

Part No. Reg. Description 1-711- Net Price

-9800-9810

$4.276.08

$3.424.86

Uncoated Clear Coated Clear

4.857.97

3.886.38

Uncoated Clear Coated Clear

YUKON

YUKON XL

NOW!

-9800XL-9810XL

FEATURES:• Spatula temples.• Dielectric, no metal parts.• Rugged polycarbonate lens filters 99.9% of harmful UV rays.• Single lens design with integral side shields for greater orbital seal.• Wraparound style for increased angular coverage and improved peripheral vision.• Integral brow guard and vented side shields.• Exclusive Duramass® scratch resistant coating.• YUKON XL: Enlarged to fit over regular prescription glasses.

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

FLUIDS

32

Small Submersible Oil Filled Pump

FEATURES:• 10’ cord.• 170 GPH @ 1 ft.• Operates submersed.• Bottom inlet has snap-off screen for easy cleaning.• Not recommended for aquariums, swimming pools, or fuel oil transfer.• Epoxy-csoated aluminum housing.• 1/4" inlet MNPT discharge, with 90° elbow

accessory, accepts 1/2" I.D. tubing.• 7’ shut-off head capability, and screened inlet.

Permanently Lubricated Pump

Model 1-ATPart No.1-440-500286Reg. NetPrice $158.89

$13506

"B"DIA

"D" D

IA

"A"

"C"

"E" NPT

TURRET JETTM

Universal Coolant Nozzle

FEATURES:• Full hemisphere of adjustment.• Adjusts easily for accurate coolant placement.• Difficult to accidentally knock out of adjustment.• Improves chip control.• Increases tool life.• Reduces setup time.• Maximum pressure of 150 PSI.

Size Part No. Reg. Net (E) (A) (B) (C) (D) 1-541- Price/Ea.

1/8 NPT/BSPT .82" .63" .50" .11"1/4 NPT/BSPT .94 .75 .63 .153/8 NPT/BSPT 1.13 .88 .75 .22

$15.0415.9717.59

-070-075-080

Dimensions

$13.5414.3715.83

SALE!

Workforce® SeriesHeavy-Duty Lever Action Grease Gun

Model L1350Part No. 1-914L-L1350Reg. Net Price $70.85

$6022

FEATURES:• Heavy-duty die cast head construction for maximum durability and longer service life.• 3-Way loading: bulk, filler nipple, cartridge.• Bleeder valve for purging unwanted air.• Variable stroke allows grease delivery in confined areas where short strokes and high pressure on demand are needed.• Positive grip follower handle.• 4-jaw coupler for better grip and longer service life.• Non-slip knurled barrel for better grip.

Mist or FloodCoolant 1 Gallon

For mist and flood cooling. Highlyrecommended where tougher machining conditions require greater lubricity,where material is very abrasive, ortool pressure is exceptionally great.

Plastic BottlePart No. 1-437-771Reg. NetPrice $68.20

$6138 Formula 77 forTougher Service

FEATURES:• Repels dirt, dust and grime.• Compatible with conventional lubricants.• Impervious to salt water, safe in potable water.• Prevents rust & corrosion while reducing friction.• Clean, non-toxic, non-staining, dielectric long lasting lubricant.• Will not stain or harm wood, leather, rubber, plastics, fabric and paints.• Operating Temperature: -45°F to +450°F.• USDA/NSF listed food grade lubricant NLGI-2 rated H1.

Multi-Purpose Synthetic Grease

Super Lube® everywhere...and "no wear"!

Patented synthetic NLGI grade 2 heavy-duty multi-purpose lubricant with Syncolon (PTFE). Synthetic base fluids and the addition of PTFE micro powders combine to form a premium lubricant that provide long life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced and productivity is increased.

14.1 oz. CartridgePart No.1-444-41150Reg. NetPrice $23.10

$1964

400 gm JarPart No.1-444-41160Reg. NetPrice $23.26

$1977

FEATURES:• Integrated Diverter™ knows the difference between tramp oil and oil in coolant.• Heavy-duty construction.• Continuous duty fan cooled motor.• Saves nearly $300 versus other disk skimmers.

12" SmartDisk Skimmer

Model GS4H300Part No. 1-122-014Reg. Net Price $533.98

$45388TWO YEAR WARRANTYON ALL OTHER PARTS.

Most economical disk skimmeravailable for coolant use.

LIFETIME WARRANTY ON DISK ANDWIPERS.

FEATURES:• Works best when used with Zebra Oxygenator.• No formaldehyde or harmful chemicals.• Safer and more economical than biocides.• Eliminates sump odors caused by hydrogen sulfide bacterial emissions.

OdorControl Tablets

Part No. 1-122-020Reg. Net Price $62.87

$5030

One tablet per 25 gallonsof coolant every week.

Designed for small sumps,200 gallons or less.15 tablets per tube.

Do away with Coolant Stench!

FEATURES:• Dual sided ‘scrub & clean’ heavy-duty wipes offer the fastest deepest clean ever – use them for just about every cleaning task. Best for cleaning hands.• The unique combination of power cleansers targets the toughest grime to ensure the wipes never get stuck in your muck. Upgraded 4x4 formula - contains 4 powerful cleaning agents + 4 skin conditioners; aloe vera, lanolin, vitamin E and glycerin. • Remove paint, adhesive, poly foam, gap fill, oil and more from hands, tools & surfaces. Dermatologically tested to be safe on hands.• Contains 80 wipes (8 x 12")

Heavy-DutyBig Wipes

Part No. 1-485-60046Reg. Net Price $23.23

$2149

One Wipe Removes

It All!

Watch Videoof Big Wipes

in action @KBCTools.com

Textured, Scrub & Clean Wipes Air tools are an investment; protect themwith high quality Air Tool Lubricant.Coilhose Air Tool Lubricant is speciallyformulated ISO 22 lubricant,designed to prolong the lifeof air tools and accessories.

Air Tool Lubricants

1 PintPart No.1-816-ATL016

$1310

1 GallonPart No.1-816-ATL128Reg. NetPrice $62.45

$5621 STANDARD GRADETemp. Range: 50o +

Major Credit Cards Accepted: 33Subscribe @ KBCTools.com to Get Exclusive Email Offers.

HAND TOOLS

MACHINE-MADE

Letter & Figure Stamps

1/16" 3/32 1/8 3/16 1/4 3/8 1/2

-004-006-008-012-016-024-032

$19.6119.6119.6124.4929.3042.8663.63

$58.9058.9058.9073.3987.81

128.42190.73

Reg. Reg. Size Part No. Net Price Net Price

Figure Sets9 Pc. 1-8992-

Letter Sets27 Pc. 1-8993-

SALE! SALE!$16.67

16.6716.6720.8224.9136.4354.09

$50.0750.0750.0762.3874.64

109.16162.12

® Ballpoint Hex L-Wrench SetsIn Bondhex Cases

BLX-13 - 13 Pc. Inch Set(.050" - 3/8")Part No. 1-927-10937Reg. Net Price $25.66

$1925

BLX-9M - 9 Pc. Metric Set(1.5 - 10mm)Part No. 1-927-10999Reg. Net Price $20.86

$1565

FEATURES:• Protanium™ has 20% more

torque in use for tighter screws. It also provides

longer wear, and has sharper corners for extra grab.

Balldriver® T-WrenchesInch & Metric

FEATURES:• Extra long reach blades are welded into handle.• Chamfered tip allows blade to enter screw without obstruction.• Ergonomically designed cushion grip handles are color coded.• Ball tip saves time by spinning faster and can reach blind locations with ease. Angles work at 25°.• Tool stand can be wall or benchtop mounted, keeping your tools organized and ready for use.• ProGuardTM corrosion resistant dry finish is 5x more corrosion resistant than oxide coatings.• ProtaniumTM has 20% more torque in use for tighter screws. Also it provides longer wear, & has sharper corners for extra grab.

8 Pc. Metric Set w/StandSizes: 2, 2.5, 3, 4, 5, 6, 8& 10mm with Red Handles.Part No. 1-927-13189Reg. Net Price $71.53

$5365

10 Pc. Inch Set w/StandSizes: 3/32", 7/64",1/8", 9/64", 5/32", 3/16",7/32", 1/4", 5/16" & 3/8"with Yellow Handles.Part No. 1-927-13190Reg. Net Price $86.15

$6461

®

FEATURES:• Cushion-grip handle for greater torque and comfort.• Sturdy bit and screw holding magnet allows for

screws to fit securely in place for easy use.• Includes complete tamperproof bit set in block.

BITS INCLUDED:• Tri-Wing® - 1, 2, 3, 4• Spanner - 4, 6, 8, 10• TORQ-SET® - 6, 8, 10• Metric Hex - 2, 2.5, 3, 4, & 5mm• TORX® - T7, T8, T10, T15, T20, T25, T27, T30, T40• Fraction Hex - 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"• 1/4" square to 1/4" hex adapter to drive sockets

Part No. 1-927-32510Reg. Net Price $56.15

$4773

KLEIN TOOLS32 Pc. Tamperproof Bit Setwith Magnetic Screwdriver

7 Pc. 3/8" Drive Hex Bit Sockets Sets

Chrome Vanadium alloy steel socket base for long lasting durability and protection.

Part No. 1-552-CBSS0Reg. Net Price $29.36

$2496

SAE SET INCLUDES:• 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"• Storage Rack

METRIC SET INCLUDES:• 3, 4, 5, 6, 7, 8, 10mm• Storage Rack

Part No. 1-552-CBSS1Reg. Net Price $32.50

$2763

Triangular Scraper

Blade Length: 2-1/2"Overall Length: 6-1/2"Part No. 1-805-478

Reg. Net Price $14.05

$1265

FEATURES:• For scraping, trimming and deburring metals, tubing and other materials.• Hollow-ground cutting edges stay sharper longer and resharpen easily.• Correctly hardened and tempered triple-edge blade, secured in wood handle with steel ferrule.

Part No. 1-909-2455Reg. Net Price $64.65

$5495

FEATURES:• Hear and feel wrench click when torque value is reached.• High-contrast dual range scale.• Reversible drive chrome vanadium steel ratchet head.• Durable all-steel construction with corrosion-resistant finish.• Knurled handle.

Click Torque Wrenches

®

Supplied with conversiontable chart and storage case.

3/8" Drive Torque Range: 120-960 inch/lbs.

Automatic Center Punch

Length: 5" (125mm) Diameter: 5/8" (16mm)Part No. 1-805-77

$2750FEATURES:• Lightweight body.• Alloy steel parts for long wear.• Spring loaded - adjustable for light or heavy strokes.

Call: 1-888-KBC-TOOL Fax: 1-800-668-5615 Web: KBCTools.com

POWER / AIR TOOLS

34

6" MediumRear Exhaust Air Die Grinder1/4" Collet

Part No. 1-829-5762Reg. Net Price $45.75

$3660SPECIFICATIONS:Speed (Variable) .......... 20,000 RPMAverage Air Consumption ...... 3 CFMWeight ................................ 1-1/2 lbs.

SPECIFICATIONS:• Sturdy 1/2 HP motor built-in power regulator.• Full ball bearing construction.

1/2" Impact Wrench

SPECIFICATIONS:Speed ........................ 6,000 RPMAverage SCFM ....................... 5.1Drive Size / Bolt Capacity ........1/2"Air Pressure ....................... 90 PSIWeight ..................................5 lbs.

FEATURES:• Soft grip adds increased comfort during extended use.• Rocking dog type impact design good for DIY projects and general purpose applications like installing lug nuts & bolts.• Delivers 250 ft./lbs. of torque to quickly remove and install lug nuts and bolts.• Push button forward/reverse switch allows for one-handed directional changes.

Model TL050201AVPart No. 6-399-200Reg. Net Price $90.76

$6353

SPECIFICATIONS:Motor ........... 1 HP, 120V AC, 6 AMPNo Load Speed ............ 11,000 RPMWire Cup Brush ............................. 3"Spindle Thread .................... 5/8"-11"Wire Wheel .................................... 4"Length .................................. 10-1/2"Weight ............................... 3.75 lbs.

4-1/2" Small Angle Grinder

INCLUDES:• Guard.• Flange Kit.

• Abrasive Wheel.• Auxiliary Handle.• Spanner Wrench.

FEATURES: • Epoxy coated field windings protect against abrasive dust ad metal debris.• Sealed switch keeps debris out of the mechanism and extends switch life.• Service MinderTM brushes eliminate guesswork by stopint the tool when preventative maintenance is required.• Spindle lock - For quick wheel changes.• Lock-on/off for extended use applications.• 2-position auxiliary handle.

Part No. 1-833-1375AReg. Net Price $127.10

$10168

Precision Drill Bit Sharpener

FEATURES: • Custom points from 115° to 140°.• Sharpens 3/32"-3/4" high-speed steel, masonry, carbide, and TiN-coated bits.• Creates split-point bits from standard bits.• Adjustable Material Take-Off (MTO) - Fine-tune the sharpening process, touch-up a slightly dull bit, or deep grind for a heavily damaged bit.• Quick Change diamond sharpening wheel is long-lasting and easy to replace after several hundred sharpenings (no tools needed).• E-Z Align SystemTM for correct sharpening alignment.

Restore a full range of bits to like-new sharpness in less than 60 seconds!

Model DD750XPart No. 1-817-DD750XReg. Net Price $240.17

$20414

INCLUDES:• 180 Grit Wheel.• User's Guide.• Instructional DVD.

Supplied with a case.3 Year Warranty!

SPECIFICATIONS:Volts ..................... 120 AC/DCSpindle ................................ 1"No Load Speed .... 3,900 RPMBevel Capacity .................. 45O

Arbor Size ........................... 1"Length ............................... 16"Tool Weight ................ 43.5 lbs.

Part No. 1-828-6177-20Reg. Net Price $332.05

$28224

14" Abrasive Cut-Off Machine

FEATURES:• Powerful 15-amp, 4 HP motor delivers maximum cutting performance in various materials.• Large cutting capacity up to 5".• Quick-adjust vise clamp for different material sizes.• 45o Miter capacity with adjustable fence:

Allows for quick & accurate miter cuts without flipping heavy material.

• Durable, lightweight design.• Oversized wheel guard.• All-ball-bearing construction delivers maximum durability.• Large spindle lock button: Make quick and easy blade changes wearing gloves.

INCLUDES:• Abrasive Wheel.• Hex Wrench.• Vise.

FEATURES: • DEWALT® brushless motor delivers up to 57% more run time over brushed.• XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs.• Compact (7.2" front to back) & lightweight (3.5 lbs.).• Metal ½" ratcheting chuck for superior bit gripping strength.• High speed transmission delivers 2-speed settings (0-600/0-2,000 RPM) improving speed and torque control

across a range fastening and drilling applications.• LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces. LED placement on tool foot eliminates chuck shadows.• Ergonomic comfort grip handle.

Part No. 1-826-DCD790D2Reg. Net Price $484.45

$41178

1/2" 20V MAX XR Lithium-Ion BrushlessCompact Drill/Driver

KIT INCLUDES:• Kitbox.• Charger.• Belt hook.

• On-board bit holder.• DCD790 1/2" drill/driver.• (2) 20V MAX XR compact Li-Ion batteries (2.0Ah).

SPECIFICATIONS:Air Inlet ......................... 1/4" NPTAir Pressure ................ 50-70 PSIInlet Pressure .................. 60 PSINozzle Pressure .............. 47 PSI

Spray Gun & CupFEATURES:• Dual action trigger.• External breather tube cup.• Adjustable air and paint controls.• Chrome plated head & air nozzle.• 1.3mm needle, nozzle and cap set.

Model No. SX76Part No.

1-816-035Reg. Net

Price $94.40

$7552

SS355-10Spiral Saw KitFEATURES:• Dual grip zones provide superior comfort and control in horizontal and vertical positions.• Exhaust vents direct debris away from the tool.• Bump switch quickly and conveniently powers the tool with one-hand.• Serviceable motor brushes help extend tool life.• Spiral cutting allows you to make plunge cuts, freehand cuts, cut-outs and more.

SPECIFICATIONS:Speed ............ 30,000 RPMMotor ......... 120V, 5.5 AMP

Part No. 1-829-355Reg. Net Price $152.37

$12190

KIT INCLUDES:• Sabercut ZipBit.• Guidepoint ZipBit.• 1/8", 5/32", 1/4" collets.• RotoSaw spiral saw tool.

Major Credit Cards Accepted: 35Subscribe @ KBCTools.com to Get Exclusive Email Offers.

FEATURES:• Motor: Permanently Lubricated, Ball Bearing, Totally Enclosed, Thermally Protected, Permanent Split Capacitor.• Fan head (motor-blade-guard) ships in 1 UPS-able box.• Mounts ship in separate UPS-able box.

C US

A powerful 1/2 HP air circulator. This fan isengineered and designed for use in large, non-airconditioned facilities, which require general aircirculation. This fan is ideally suited for providingspot cooling where long aisles and production lines exist.

SPECIFICATIONS:Switch .................................................... Heavy Duty Pull ChainCord .........................................12' Long, 3 Conductor SJT TypeBlade ..................................................................... Coated SteelGuard................................ Double Locking, Powder Coat FinishFan Head Tilt: Pedestal ......................................................... 10° or 28° Wall Mount ....................................................... 40° or 0° Column Adjustment .............................................. 48-7/8" to 60"Pedestal Base .................................. 27" Diameter Steel Dome

Extra Heavy Duty Air Circulators2-SPEED, 1/2 HP, 120V

WITH 24" BLADES Weight Part No. Reg. Description Model No. (lbs.) 1-822- Net Price

$898.51768.58

8956

Pedestal FanWall Mount Fan

24HDHP24HDHW

-040-041

$718.81614.86

SALE!

WITH 30" BLADES Weight Part No. Reg. Description Model No. (lbs.) 1-822- Net Price

$930.45799.41

8956

Pedestal FanWall Mount Fan

30HDHP30HDHW

-042-043

$744.36639.53

SALE!

High Performance Air Circulators2-SPEED, 1/3 HP, 120V

FEATURES:• Motor: Permanently Lubricated, Ball Bearing, Totally Enclosed, Permanent Split Capacitor.• Mount ships in separate UPS-able box.• Fan head (motor-blade-guard) ships in one UPS-able box.• Meets OSHA standards.

SPECIFICATIONS:Switch ...................................................... Pull ChainCord ..................... 12’ Long, 3 Conductor SJT TypeBlade .................................................. Coated SteelGuard ............. Double Locking, Powder Coat FinishFan Head Tilt: Pedestal ....................................... 10° or 28° Wall Mount ..................................... 40° or 0° Column Adjustment ........................... 48-7/8" to 60"Pedestal Base ................ 27" Diameter Steel Dome

C US

WITH 24" BLADES Weight Part No. Reg. Description Model No. (lbs.) 1-822- Net Price

$763.08559.37

8856

Pedestal FanWall Mount Fan

MACH24PMACH24W

-050-051

$610.46447.50

SALE!

WITH 30" BLADES Weight Part No. Reg. Description Model No. (lbs.) 1-822- Net Price

$769.68605.62

8856

Pedestal FanWall Mount Fan

MACH30PMACH30W

-052-053

$615.74484.50

SALE!

MACH Series

FEATURES:• Sleeve bearing open drip proof permanently lubricated.• Meets OSHA standards.

SPECIFICATIONS:Motor 12" ....................................... 1/15 HPMotor 18" & 20" ............................... 1/8 HPSwitch .............................................. RotaryCord ........ 10’ Long, 3 Conductor SJT TypeBlade .................................... Painted SteelGuards ..... Double Locking, Chrome PlatedFan Head Tilt ...................................... 360°

Industrial Floor Circulators 3-SPEED, 115V

C US

$160.89230.13266.47

Blade Weight Part No. Reg. Model No. Size (lbs.) 1-822- Net Price

$128.71184.10213.18

SALE!-023-024-055

I-12 12" 10 I-18 18 17 I-20 20 20

Utility Circulators3-SPEED, 115V

FEATURES:• Mounts with one bolt or lag screw.• Optional wall mounting bracket.• Meets OSHA standards.

Bolt to... Work Benches, Steel Shelving, Machines, Ceilings, I-Beams,Wall, or Any Surface.

C US

SPECIFICATIONS:Motor 14" ..........................1/15 HP S-PoleMotor 18" & 20" ..................... 1/8 HP PSCSwitch ...................................... Pull ChainCord ..... 10’ Long, 3 Conductor SJT TypeBlade ................................... Coated SteelGuard .... Double Locking, Chrome PlatedFan Rotates ..................................... 360°

Blade Weight Part No. Reg. Model No. Size (lbs.) 1-822- Net Price

$255.46280.79324.83

B-14 14" 13 B-18 18 19 B-20P 20 20

-029-030-031

$204.37224.63259.86

SALE!

More Information on MarleyAir Circulators Visit: KBCTools.com

Industrial Air Circulators2-SPEED, 1/4 HP, 115V

FEATURES:• Motor: Permanently Lubricated, Ball Bearing, Totally Enclosed, Permanent Split Capacitor.• Assembled head (motor/blade/guard) and mount in one UPS-able box.• Meets OSHA standards.

SPECIFICATIONS:Switch ........................................ Pull ChainCord ....................... 3 Conductor SJT TypeBlade .................................... Coated SteelGuard ...... Double Locking, Chrome PlatedFan Head Tilt (Standard/Oscillating): Pedestal .... 10° or 28° / 15° or Wall Mount .. 40° or 0° / 15° or Column Adjustment ....... 48-7/8" to 74-5/8"Pedestal Base ........... 27" Dia. Steel Dome

C USWITH 24" BLADES

Weight Part No. Reg. Description (lbs.) Model No. 1-822- Net Price

$678.29576.10

-019-020

$546.15421.07

-015-016

$682.69526.34

$847.86720.13

SALE!

Pedestal Fan 73 24ACHPOUWall Mount Fan 42 24ACHWOU

Pedestal Fan 73 24ACHPWall Mount Fan 42 24ACHW

STANDARD

OSCILLATING - 90O ARC OR LOCK

WITH 30" BLADES

Weight Part No. Reg. Description (lbs.) Model No. 1-822- Net Price SALE!

Pedestal Fan 78 30ACHPOUWall Mount Fan 47 30ACHWOU

Pedestal Fan 78 30ACHPWall Mount Fan 47 30ACHW

STANDARD

OSCILLATING - 90O ARC OR LOCK

$697.67597.25

-021-022

$612.22458.06

-017-018

$765.28572.58

$872.09746.56

Over 860 Pages ofour Best ProductsPLUS thousands of New Items added!

KBC Volume 52Master Catalogue

To Request a Copy Call 1-888-KBC-TOOL or go to KBCTools.com

GET ONEGET ONETODAY!TODAY!

3 LOCATIONS 3 LOCATIONS TO SERVE YOU!TO SERVE YOU!Showroom Hours: Monday to Friday 8am - 5pm

ATTN: PURCHASING DEPARTMENTATTN: PURCHASING DEPARTMENT

6200 KENNEDY ROAD, UNIT #1MISSISSAUGA, ON L5T 2Z1

Fast, Easy Product Search and Filtering, Exclusive Web Offers, Mobile Friendly, Real-time Inventory, Live Chat & More!

Toronto6200 Kennedy Rd., Unit #1Mississauga, ON L5T 2Z1Local Calls ....... (905) 564-6600Fax Main Line .. (905) 564-1611

CANADA

HEADQUA RTERS

Maritimes to Saskatchewan

Vancouver108-1538 Cliveden Ave.Delta, BC V3M 6J8Local Calls ....... (604) 540-4060Fax Main Line .. (604) 540-4080

British Columbia & Alberta

Windsor5080 O’NeilOldcastle, ON N0R 1L0Local Calls ....... (519) 737-7000Fax Main Line .. (519) 737-7682

Windsor to London

INCLUDES:• 10 Blades.• Model B Holder.• Plus a FREE

Mango II handle!

Mango II B10 Long Reach Bonus Pack

Part No. 1-457-300Reg. Net Price $25.23

$1892

4 Pc. SmallParts Organizer

Part No. 1-909-21227Reg. Net Price $37.58

$3006

SET INCLUDES:• (1) Large Organizer - 11-7/16" x 9-1/16" x 2-3/8".• (2) Small Organizers - 6-1/8" x 9-1/16 " x 2-3/8".• (1) Deep Organizer - 6-1/8" x 9-1/16" x 4-1/2".

FEATURES:• Customizable dividers and removable trays give you versatility for your storage.• Perfect for tools, bolts, screws, tackle, parts, crafts and many other items.• Organizers are easy to stack and store virtually anywhere.• Made from durable polypropylene.• Snap-shut latches.

®

A1000 Sprayer32 OZ. CAPACITY

FEATURES:• Refillable & rechargeable.• Environmentally safe.• No Ozone depleting tax.• Working Pressure: 80-150 PSI.• Do not use water or water-based materials in steel sprayers.• Not recommended for paint.

INCLUDES:• 32 oz. Steel Interior, Green Exterior Sprayer.• 2 Interchangeable Nozzles.

Part No. 1-541-060Reg. Net Price $92.23

$7378

Anything an aerosol sprays SURE SHOT sprays safer!

81 PC. SET INCLUDES:• (1) Block .05"• (10) Blocks .1"-.1009" in .0001" Steps• (49) Blocks .101"-.149" in .001" Steps• (17) Blocks .15"-.95" in .05" Steps• (4) Blocks 1"-4" in 1" Steps

36 PC. SET INCLUDES:• (1) Block .05"• (3) Blocks 1, 2, 4"• (10) Blocks .1"-.1009" in .0001" Steps• (9) Blocks .101"-.109" in .001" Steps• (9) Blocks .11"-.19" in .01" Steps• (4) Blocks .2"-.5" in 1" Steps

Grade "E" Certified Gage Block Sets

ISO CERTIFIED.

No. Part No. Reg. Pieces 2-670- Net Price

$322.25579.16

36 81

-037-084

$257.80463.33

SALE!

Supplied in a deluxefitted wood case.

More information @ KBCTools.com

KBCTools.comWEB::

1-888-KBC-TOOLPHONE: 5 2 2 8 6 6 5

1-800-668-5615FAX: