Embed Size (px)
Citation preview
Inset Glass Road Stud14mm
Performance All Round... All Round Performance
m onmark ting.com
- 360 VisionFor extended visible driving distance around corners
- Easy CleanNatural rain washes away dirt.
- Durable Impact and scratch resistant.Very long lasting
- LightweightLogistical handling advantage.
More studs per truck.
- Motorcycle FriendlyTextured upper surface
- Quick InstallationSmaller stud requires smaller cut out & less adhesive
- Cost E�ectiveGet more for you money
(ask for our cost study)
Call Now on 0808 118 1922 - or visit
HighestPerformanceRatingS1 - R1
KERBSTUD D50 Whole Life PerformanceQuick Installation360 Vision
SPECIFICATION GUIDE- SIGLITE 14mm
- SPECIFICATION: Embedded, non-depressible, permanent P1A PRP1 Glass 360° road stud.
- RELEVANT STANDARD:BS EN 1463-1BS EN 1463-2:2000
- DESCRIPTIONThe stud is supplied ready for installation. The stud is made of fully tempered glass that gives optimum impact resistance and relies on natural weathering for maintenance. Being Glass the stud is abrasion resistance and doesn’t require removal before road planning. Circular design ensures 360° visibility for maximum e�ect improving road safety.
- REFERENCE STATUTORY INSTRUMENT:Tra�c signs regulations and general directions: 2002
- HOW TO SPECIFY THE ABOVE PRODUCT:The following description can be used...An embedded, non depressible road stud rated P1A PRP1 in accordance with BS EN 1463-1:2009 which meets the requirements of direction 57 of the Tra�c Signs Regulations and General Directions: 2002. The re�ective lens size is to be 2.730 inches by .939 inches (69.34mm x
Increase rural/ urban safety with kerb demarcation.Ideal for roundabouts, tra�c islands and sharp corners etc.The Siglite is supplied ready for installation. The stud is made of fully tempered glass that gives optimum impact resistance and relies on natural weathering for maintenance. Circular design ensures 360° for maximum visibility improvingroad safety.
23.85mm) The retention performance for re�ectivity and adhesion to be no less than S1 & R1, with a �nish height of no more than 14mm.The following is a set of ratings and codes:-P1A, H3, HD1, NCR1, PRP1, S1, R1
P Permanent1 Glass Re�ector abrasive-resistantA Non depressibleH1 HeightHD1* Horizontal dimensionPRP1* Re�ective performance, newNCR1* Coloured of re�ected lightS1* Retention of studs at end of road trialR1* Retention of re�ectivity after road trial
*meets the requirements for this characteristic in Tra�c Signs General Directions 2002 direction 57.
meon ireland – nicarrick house, 48 bridge road, burren
warrenpoint, co. down bt34 3qtt. 028 3025 1525 f. 028 3025 7077
meon marketingrailside, northarbour spur
portsmouth, po6 3tut. 023 9220 0606 f. 023 9220 0707
m onmark ting.com
