Upload
justina-goodwin
View
212
Download
0
Embed Size (px)
Citation preview
© 2
01
0 M
AiS
PA
CE,
Inc.
ALUR Dividing Wall
An Attractive, Cost Effective Sidewall for ALUR Glass Walls and MAiSPACE
Floor to Ceiling Panels
© 2
01
0 M
AiS
PA
CE,
Inc.
Component Parts
• Floor and Ceiling Track• Vertical Stud• Stud Spacer• Panel Clip• Panel• Accessory Trim
© 2
01
0 M
AiS
PA
CE,
Inc.
Key Features
• 5” Thick Walls Provide Outstanding Acoustics (STC 44)• Minimal Kit of Parts and “Snap Fit” Connections • Only 1 Hour per 4 Feet Install Time• Removable Panels Allow Easy Access to Power & Cabling• Tight Fitting Panel to Panel Reveal• Can be Blocked to Accommodate Hang-on Components• Accommodates Medical Gas Lines and Plumbing
© 2
01
0 M
AiS
PA
CE,
Inc.
Step 1: Install Floor & Ceiling Track
• Install Floor and Ceiling Track:– Universal Floor and Ceiling Track– Track Follows the Level of Floor and Ceiling – No Need to Float Floor as Required for Unitized
Systems
© 2
01
0 M
AiS
PA
CE,
Inc.
Step 2: Install Stud Extender• Install Stud Extender In Vertical Stud:
– No Tools Required
© 2
01
0 M
AiS
PA
CE,
Inc.
Step 3: Snap into Floor Track• Install Stud Extender into Floor and Ceiling Track:
– Built-in Stop Provides Pathway for Modular Power
© 2
01
0 M
AiS
PA
CE,
Inc.
Step 4: Install Stud Spacer• Install Stud Spacer in Vertical Stud:
– Spaces Studs and Provides Pathway for CablesNote: Install Optional Green Wool Insulation.
© 2
01
0 M
AiS
PA
CE,
Inc.
Step 5: Install Panel Clip• Install Panel Clip into Side of Panel with Panels
Laying on Floor– Easily removable
© 2
01
0 M
AiS
PA
CE,
Inc.
Step 7: Install Panels on Studs• Lift Panels and Snap into Studs
– Self Aligning
© 2
01
0 M
AiS
PA
CE,
Inc.
Step 6: Install Accessory Trim• Install Accessory Trim on Floor & Ceiling Track
and Studs at Wall Start
© 2
01
0 M
AiS
PA
CE,
Inc.
Optional Marker Board• One Piece Ceramic Marker Board