Upload
tiffany-allen
View
250
Download
0
Tags:
Embed Size (px)
Citation preview
© 2009 Brooks/Cole - Cengage
Thermochemistry
CHAPTER 6
1
2
© 2009 Brooks/Cole - Cengage
Objectives• Definitions of energy, heat, work and how they
interrelate• 1st Law of Thermodynamics• Heat Capacity• Energy Transfer• Define Universe, System, and Surroundings• Enthalpy• Hess’s Law• Calorimetry
3
© 2009 Brooks/Cole - Cengage
Geothermal power —Wairakei North Island, New Zealand
4
© 2009 Brooks/Cole - Cengage
Ch. 6.1 - Energy & Chemistry
• Burning peanuts supply sufficient energy to boil a cup of water.
• Burning sugar (sugar reacts with KClO3, a strong oxidizing agent)
5
© 2009 Brooks/Cole - Cengage
Energy & Chemistry
• These reactions are PRODUCT FAVORED• They proceed almost completely from reactants
to products, perhaps with some outside assistance.
6
© 2009 Brooks/Cole - Cengage
Energy & Chemistry
ENERGY is the capacity to do work or transfer heat.
HEAT is the form of energy that flows between 2 objects because of their difference in temperature.
Other forms of energy —• light• electrical• kinetic and potential
7
© 2009 Brooks/Cole - Cengage
Potential & Kinetic Energy
Potential energy — energy a motionless body has by virtue of its position.
8
© 2009 Brooks/Cole - Cengage
• Positive and negative particles (ions) attract one another.
• Two atoms can bond
• As the particles attract they have a lower potential energy
Potential Energyon the Atomic
Scale
Potential Energyon the Atomic
Scale
NaCl — composed of Na+ and Cl- ions.
9
© 2009 Brooks/Cole - Cengage
• Positive and negative particles (ions) attract one another.
• Two atoms can bond
• As the particles attract they have a lower potential energy
Potential Energyon the Atomic
Scale
Potential Energyon the Atomic
Scale
10
© 2009 Brooks/Cole - Cengage
Potential & Kinetic EnergyKinetic energy — energy of motion
• Translation
11
© 2009 Brooks/Cole - Cengage
Potential & Kinetic Energy
Kinetic energy — energy of motion.
translate
rotate
vibratetranslate
rotate
vibrate
12
© 2009 Brooks/Cole - Cengage
Kinetic and Potential Energy Summary
• Chemical Energy is due to the potential energy stored in the arrangements of the atoms in a substance.
• If you run a reaction that releases heat, you are releasing the energy stored in the bonds.
• Energy because of temperature is associated with the kinetic (movement) energy of the atoms and molecules.
13
© 2009 Brooks/Cole - Cengage
Internal Energy (E)*Internal Energy (E)*
• PE + KE = Internal energy (E) (1st Law of Thermodynamics)• Internal energy of a chemical
system depends on• number of particles• type of particles• temperature
*Note: Internal energy is sometimes symbolized by U
14
© 2009 Brooks/Cole - Cengage
Internal Energy (E)Internal Energy (E)PE + KE = Internal energy (E)
15
© 2009 Brooks/Cole - Cengage
Internal Energy (E)Internal Energy (E)
• The higher the T the higher the internal energy
• So, use changes in T (∆T) to monitor changes in energy (∆E).
16
© 2009 Brooks/Cole - Cengage
ThermodynamicsThermodynamics• Thermodynamics is the science of
energy transfer as heat.
Heat energy is associated with molecular motions.
Energy transfers as heat until thermal equilibrium is established.
∆T measures energy transferred.
17
© 2009 Brooks/Cole - Cengage
System and Surroundings
• SYSTEM– The object under study
• SURROUNDINGS– Everything outside the
system
18
© 2009 Brooks/Cole - Cengage
Directionality of Energy Transfer
• Energy transfer as heat is always from a hotter object to a cooler one.
• EXOthermic: energy transfers from SYSTEM to SURROUNDINGS.
T(system) goes downT(surr) goes up
19
© 2009 Brooks/Cole - Cengage
Directionality of Energy Transfer
• Energy transfer at heat is always from a hotter object to a cooler one.
• ENDOthermic: heat transfers from SURROUNDINGS to the SYSTEM.
T(system) goes upT (surr) goes down
20
© 2009 Brooks/Cole - Cengage
Energy and Temperature Summary
1) Temperature determines the direction of thermal energy transfer.
2) The higher the temperature of a given object, the greater the thermal energy (molecular motion) of its atoms, ions, or molecules.
21
© 2009 Brooks/Cole - Cengage
Energy and Temperature Summary
3) Heating and cooling are processes by which energy is transferred as heat from an object at higher temperature to one at lower temperature.
• Heat is not a substance but a ‘process quantity.’ That is heating is a process that changes the energy of a system.
22
© 2009 Brooks/Cole - Cengage
Energy & ChemistryEnergy & Chemistry
All of thermodynamics depends on the law of
CONSERVATION OF ENERGY.
• The total energy is unchanged in a chemical reaction.
• If potential energy (PE) of products is less than reactants, the difference must be released as kinetic energy (KE).
23
© 2009 Brooks/Cole - Cengage
Energy Change in Chemical ProcessesEnergy Change in
Chemical Processes
Reactants
Products
Kinetic Energy
PE
Reactants
Products
Kinetic Energy
PE
PE of system dropped. KE increased. Therefore, you often feel a T increase.
24
© 2009 Brooks/Cole - CengagePote
nti
al en
erg
y
Heat
Exothermic Reaction – reaction give off energy.
CH4 + 2O2 CO2 + 2H2O + Heat
CH4 + 2O2
CO2 + 2H2O
25
© 2009 Brooks/Cole - CengagePote
nti
al en
erg
y
Heat
Endothermic Reaction – requires external energy to proceed. Very strong bonds have low potential
energy. N2 + O2 + Heat 2NO
N2 + O2
2NO
26
© 2009 Brooks/Cole - Cengage
UNITS OF ENERGYUNITS OF ENERGY1 calorie = heat required to
raise temp. of 1.00 g of H2O by 1.0 oC.
1000 cal = 1 kilocalorie = 1 kcal
1 kcal = 1 Calorie (a food
“calorie”)But we use the unit called the JOULE
1 cal = exactly 4.184 joules
James Joule1818-1889
27
© 2009 Brooks/Cole - Cengage
Work vs Energy Flow
Copyright © Cengage Learning. All rights reserved
To play movie you must be in Slide Show Mode
28
© 2009 Brooks/Cole - Cengage
• Work = P × A × Δh = PΔV– P is pressure.– A is area.– Δh is the piston moving a
distance.– ΔV is the change in volume.
Work
29
© 2009 Brooks/Cole - Cengage Copyright © Cengage Learning. All rights reserved
• For an expanding gas, ΔV is a positive quantity because the volume is increasing. Thus ΔV and w must have opposite signs:
w = –PΔV • To convert between L·atm and Joules, use 1 L·atm =
101.3 J.
Work
30
© 2009 Brooks/Cole - Cengage Copyright © Cengage Learning. All rights reserved
Which of the following performs more work?
a) A gas expanding against a pressure of 2 atm from 1.0 L to 4.0 L.
b) A gas expanding against a pressure of 3 atm from 1.0 L to 3.0 L.
They perform the same amount of work.
Practice
31
© 2009 Brooks/Cole - Cengage
FIRST LAW OF THERMODYNAMICSFIRST LAW OF
THERMODYNAMICS
∆E = q + w
heat energy transferred
energychange
work doneby the system
Energy is conserved!
32
© 2009 Brooks/Cole - Cengage
energy transfer out(exothermic), -q
energy transfer in(endothermic), +q
SYSTEMSYSTEM
∆E = q + w∆E = q + w
w transfer in(+w)
w transfer out(-w)
33
© 2009 Brooks/Cole - Cengage
Practice Problems• Calculate ΔE, and determine whether the process
is endothermic or exothermic for the following cases.
a)q = 1.62 kJ and w = -874 Jb)A system releases 113 kJ of heat to the
surroundings and does 39 kJ of work on the surroundings.
c)The system absorbs 77.5 kJ of heat while doing 63.5 kJ of work on the surroundings.
34
© 2009 Brooks/Cole - Cengage
Ch. 6.2 - HEAT CAPACITY
The heat required to raise an object’s T by 1 ˚C.
Which has the larger heat capacity?
35
© 2009 Brooks/Cole - Cengage
Specific Heat Capacity
Specific Heat Capacity
How much energy is transferred due to T difference?
The heat (q) “lost” or “gained” is related to a) sample massb) change in T and
c) specific heat capacity (Symbolized by s or Cp)Specific heat capacity =
heat lost or gained by substance (J)
(mass, g)(T change, K)
36
© 2009 Brooks/Cole - Cengage
Specific Heat Capacity
Specific Heat Capacity
Substance Spec. Heat (J/g•K)
H2O 4.184
Ethylene glycol2.39Al 0.897glass 0.84
Aluminum
37
© 2009 Brooks/Cole - Cengage
Specific Heat Capacity Example
Specific Heat Capacity Example
If 25.0 g of Al cool from 310oC to 37oC, what amount of energy (J) is lost by the Al?
Specific heat capacity =
heat lost or gained by substance (J)
(mass, g)(T change, K)
38
© 2009 Brooks/Cole - Cengage
Specific Heat Capacity Example
Specific Heat Capacity Example
If 25.0 g of Al cool from 310 oC to 37 oC, what amount of energy (J) has been transferred by the Al?
heat gain/lose = q = (mass)(Sp. Heat)(∆T) or q = m x Cp x ∆T
where ∆T = Tfinal - Tinitial
q = (25.0 g) (0.897 J/g•K)(37 - 310)K
q = - 6120 J
Notice that the negative sign on q signals heat “lost by” or
transferred OUT of Al.
Notice that the negative sign on q signals heat “lost by” or
transferred OUT of Al.
39
© 2009 Brooks/Cole - Cengage
Specific Heat Capacity Practice
Specific Heat Capacity Practice
In an experiment, it was determined that 59.8 J was required to raise the temperature of 25.0 g of ethylene glycol by 1.00 K. Calculate the specific heat capacity of ethylene glycol from these data.
40
© 2009 Brooks/Cole - Cengage
Energy TransferEnergy Transfer
• Use energy transfer as a way to find specific heat capacity, Cp
• 55.0 g Fe at 99.8 ˚C• Drop into 225 g water at
21.0 ˚C• Water and metal come to
23.1 ˚C• What is the specific heat
capacity of the metal?
41
© 2009 Brooks/Cole - Cengage
Energy Transfer Important Points• Iron and the water are the system, the beaker
holding the water and everything else is the surroundings.
• The iron and water end up at the same temp.• The energy transferred as heat from the iron to the
water is negative (temp of Fe drops). The qwater increase is positive because the temp of water increases.
• The values of qwater and qiron are numerically equal but opposite in sign.
42
© 2009 Brooks/Cole - Cengage
Because of conservation of energy,
q(Fe) = –q(H2O) (energy out of Fe = energy into H2O)
or q(Fe) + q(H2O) = 0
q(Fe) = (55.0 g)(Cp)(23.1 ˚C – 99.8 ˚C)
q(Fe) = –4219 • Cp
q(H2O) = (225 g)(4.184 J/K•g)(23.1 ˚C – 21.0 ˚C)
q(H2O) = 1977 J
q(Fe) + q(H2O) = –4219 Cp + 1977 = 0
Cp = 0.469 J/K•g
Energy TransferEnergy Transfer
43
© 2009 Brooks/Cole - Cengage
ENTHALPYENTHALPYMost chemical reactions occur at constant P, so
and so ∆E = ∆H + w (and w is usually small)
∆H = energy transferred as heat at constant P ≈ ∆E
∆H = change in heat content of the system
∆H = Hfinal - Hinitial
and so ∆E = ∆H + w (and w is usually small)
∆H = energy transferred as heat at constant P ≈ ∆E
∆H = change in heat content of the system
∆H = Hfinal - Hinitial
Heat transferred at constant P = qp
qp = ∆H where H = enthalpy
Heat transferred at constant P = qp
qp = ∆H where H = enthalpy
44
© 2009 Brooks/Cole - Cengage
If Hfinal < Hinitial then ∆H is negative
Process is EXOTHERMIC
If Hfinal < Hinitial then ∆H is negative
Process is EXOTHERMIC
If Hfinal > Hinitial then ∆H is positive
Process is ENDOTHERMIC
If Hfinal > Hinitial then ∆H is positive
Process is ENDOTHERMIC
ENTHALPYENTHALPY∆H = Hfinal – Hinitial
Enthalpy is an extensive property!!
45
© 2009 Brooks/Cole - Cengage
Hydrogen peroxide decomposes to water and oxygen by the following reaction:
2H2O2(l) 2H2O(l) + O2(g) ∆H = -196 kJ–Calculate the value of energy
transferred when 5.00 g of H2O2(l) decomposes at constant pressure.
Hints: What is enthalpy of reaction if only 1 mole of peroxide is decomposed?
Practice Using EnthalpyPractice Using Enthalpy
46
© 2009 Brooks/Cole - Cengage
– Hydrogen peroxide decomposes to water and oxygen by the following reaction:
2H2O2(l) 2H2O(l) + O2(g) ∆H = -196 kJ -196 kJ/2 mol peroxide = -98 kJ/mol of peroxide
5.0 g * (1 mol/34 g H2O2) = 0.147 mol H2O2
= 0.147 mol H2O2 * -98 kJ/mol peroxide
= -14.4 kJHeat is a stoichiometric value which works the
same way as last year.
Practice Using EnthalpyPractice Using Enthalpy
47
© 2009 Brooks/Cole - Cengage
Consider the formation of water
H2(g) + 1/2 O2(g) H2O(g) + 241.8 kJ
USING ENTHALPYUSING ENTHALPY
Exothermic reaction — energy is a “product” and
∆H = – 241.8 kJ
48
© 2009 Brooks/Cole - Cengage
Making liquid H2O from H2 + O2 involves two exothermic steps.
USING ENTHALPYUSING ENTHALPY
H2 + O2 gas
Liquid H2OH2O vapor
49
© 2009 Brooks/Cole - Cengage
Calorimetry
• Definition of calorimetry: measure heat flow in a chemical reaction.
• Two kinds of calorimeters (devices that measure heat flow):–Constant pressure (coffee cup calorimeter)–Constant volume (bomb calorimeter)
• Heat Capacity – amount of heat needed to raise an object’s temperature by 1°C or 1 K.
50
© 2009 Brooks/Cole - Cengage
Constant Pressure Calorimetry
TmC
T
qH P
solution of grams
solution ofheat specificsolnrxn
m = mass of solutionC = heat capacity of the
calorimeter (J/g- C) (or K)⁰∆T = the change in temperature
in C or K⁰
51
© 2009 Brooks/Cole - Cengage
Constant Pressure Calorimetry Practice 1
• When a 9.55 g sample of solid NaOH dissolves in 100.0g of water in a coffee-cup calorimeter, the temperature rises from 23.6˚C to 47.4˚C. Calculate the ΔH (in kJ/mol NaOH) for the solution process
NaOH(s) Na+(aq) + OH-(aq)• Assume the specific heat of the solution is
the same as that for water (4.184 J/g-˚C)• Hint: what is system, what are surroundings?
52
© 2009 Brooks/Cole - Cengage
Constant Pressure Calorimetry Practice 2
• A 150.0 g sample of a metal at 75.0°C is added to 150.0 g H2O at 15.0°C. The temperature of the water rises to 18.3°C. Calculate the specific heat capacity of the metal.
53
© 2009 Brooks/Cole - Cengage
Measuring Heats of ReactionConstant Volume CALORIMETRYConstant Volume CALORIMETRY
54
© 2009 Brooks/Cole - Cengage
Measuring Heats of ReactionCALORIMETRYCALORIMETRY
Constant Volume “Bomb” Calorimeter
• Burn combustible sample.
• Measure heat evolved in a reaction.
• Derive ∆E for reaction.
55
© 2009 Brooks/Cole - Cengage
CalorimetrySome heat from reaction warms waterqwater = (sp. ht.)(water mass)(∆T)
Some heat from reaction warms “bomb”qbomb = (heat capacity, J/K)(∆T)
Total heat evolved = qtotal = qwater + qbomb
56
© 2009 Brooks/Cole - Cengage
Calculate energy of combustion (∆E) of octane. C8H18 + 25/2 O2 8 CO2 + 9 H2O
• Burn 1.00 g of octane
• Temp rises from 25.00 to 33.20 oC
• Calorimeter contains 1200. g water
• Heat capacity of bomb = 837 J/K
Measuring Heats of ReactionCALORIMETRY - Example
Measuring Heats of ReactionCALORIMETRY - Example
57
© 2009 Brooks/Cole - Cengage
Step 1 Calc. energy transferred from reaction to water.
q = (4.184 J/g•K)(1200 g)(8.20 K) = 41,170 J
Step 2 Calc. energy transferred from reaction to bomb.
q = (bomb heat capacity)(∆T) = (837 J/K)(8.20 K) = 6860 JStep 3 Total energy evolved 41,200 J + 6860 J = 48,060 J
Energy of combustion (∆E) of 1.00 g of octane
= - 48.1 kJ
Measuring Heats of ReactionCALORIMETRY - Example
Measuring Heats of ReactionCALORIMETRY - Example
58
© 2009 Brooks/Cole - Cengage
A 1.00 g sample of sucrose (C12H22O11) is burned in a bomb calorimeter. The temperature of 1500. g of water in the calorimeter rises from 25.00˚C to 27.32˚C. The heat capacity of the bomb is 837 J/K and the specific heat capacity of water is 4.18 J/g-K. Calculate the heat evolved a)Per gram of sucroseb)Per mole of sucrose (M = 343 g/mol)
‘BOMB’ CALORIMETRY PRACTICE ‘BOMB’ CALORIMETRY PRACTICE
59
© 2009 Brooks/Cole - Cengage
Making H2O from H2 involves two steps.
H2(g) + 1/2 O2(g) H2O(g) ΔrH˚ =-242 kJ
H2O(g) H2O(liq) ΔrH˚ =-44 kJ
-----------------------------------------------------------------------
H2(g) + 1/2 O2(g) H2O(liq) ΔrH˚ =-286 kJ
Example of HESS’S LAW—If a rxn. is the sum of 2 or more others, the net ∆H is the sum of the ∆H’s of the other rxns.
Ch. 6.3 – Hess’s Law
60
© 2009 Brooks/Cole - CengageCopyright © Cengage Learning. All rights reserved 60
To play movie you must be in Slide Show ModePC Users: Please wait for content to load, then click to play
Hess’s Law
61
© 2009 Brooks/Cole - Cengage
Hess’s Law & Energy Level Diagrams
Forming H2O can occur in a single step or in a two steps. ∆rHtotal is the same no matter which path is followed.
Active Figure 5.16
NOTE: ∆rH stands for the enthalpy change for a
reaction, r
NOTE: ∆rH stands for the enthalpy change for a
reaction, r
62
© 2009 Brooks/Cole - Cengage
Hess’s Law & Energy Level Diagrams
Forming CO2 can occur in a single step or in a two steps. ∆rHtotal is the same no matter which path is followed.
Active Figure 5.16
63
© 2009 Brooks/Cole - Cengage
Enthalpy and Hess’s Law• If a reaction is reversed, the sign of ∆H is also
reversed.
Xe(g) + 2F2(g) XeF4(s) ∆H=-251 kJ
XeF4(s) Xe(g) + 2F2(g) ∆H = +251 kJ• ∆H is also proportional to the quantities of the
reactants and product (mol-rxn). If you multiply the coefficients by an integer, the ∆H value is multiplied by the same integer.
2Xe(g) + 4F2(g) 2XeF4(s) ∆H =-502 kJ
64
© 2009 Brooks/Cole - Cengage
Simple Hess’s Law problem
• C(graphite) + O2(g) → CO2(g)
ΔH° = –393.51 kJ mol–1
• C(diamond) + O2(g) → CO2(g)
ΔH° = –395.40 kJ mol–1
Calculate the ∆H for the conversion of graphite to diamond.
65
© 2009 Brooks/Cole - Cengage
Simple Hess’s Law problem
• C(graphite) + O2(g) → CO2(g)
ΔH° = –393.51 kJ mol–1
• CO2(g) → C(diamond) + O2(g)
ΔH° = +395.40 kJ mol–1
Add rxns together, cancel out substances that appear on both sides and get:
C(graphite) C(diamond) ΔH = 1.9 kJ
66
© 2009 Brooks/Cole - Cengage
Problem-Solving Strategy• Work backward from the required
reaction, using the reactants and products to decide how to manipulate the other given reactions at your disposal.
• Reverse any reactions as needed to give the required reactants and products.
• Multiply reactions to give the correct numbers of reactants and products.
Copyright © Cengage Learning. All rights reserved 66
67
© 2009 Brooks/Cole - Cengage
Given:
C(s) + O2(g) CO2(g) ΔH= -393.5kJ/mol
S(s) + O2(g) SO2(g) ΔH= -296.8 kJ/mol
CS2(l) + 3O2(g) CO2(g) + 2SO2(g)
ΔH = -1103.9 kJ/molUse Hess’s Law to calculate enthalpy change for
the formation of CS2(l) from C(s) and S(s)
C(s) + 2S(s) CS2(l)
Harder Example of Hess’s Law
68
© 2009 Brooks/Cole - Cengage
Multiply equations as needed:
C(s) + O2(g) CO2(g) ΔH= -393.5kJ/mol
2S(s) + 2O2(g) 2SO2(g) ΔH=2*(-296.8 kJ/mol)
=-593.6 kJ
CO2(g) + 2SO2(g) CS2(l) + 3O2(g)
ΔH = 1103.9 kJ/mol
C(s) + 2S(s) CS2(l) ΔH = 116.8 kJ
Reaction 1 was used as is
Reaction 2 was multiplied by 2 (SO2 cancels)
Reaction 3 was multiplied by -1 (Get CS2 on
product side)
69
© 2009 Brooks/Cole - Cengage
• This equation is valid because ∆H is a STATE FUNCTION
• These depend only on the state of the system and not how it got there.
• V, T, P, energy — and your bank account!
• Unlike V, T, and P, one cannot measure absolute H. Can only measure ∆H.
∆H along one path = ∆H along another path
∆H along one path = ∆H along another path
70
© 2009 Brooks/Cole - Cengage
Standard Enthalpy ValuesStandard Enthalpy ValuesMost ∆H values are labeled ∆Ho Measured under standard conditions:
• For a Compound– For a gas, pressure is exactly 1 atm.– For a solution, concentration is exactly 1 M.– Pure substance (liquid or solid)
• For an Element– The form [N2(g), K(s)] in which it exists at 1
atm and 25⁰C.
71
© 2009 Brooks/Cole - Cengage
Ch. 6.4 – Standard Enthalpies of Formation
NIST (Nat’l Institute for Standards and Technology) gives values of
∆Hfo = standard molar enthalpy of
formation— the enthalpy change when 1 mol of compound is formed from elements under standard conditions.
See Appendix 4 (A19 – A22)
72
© 2009 Brooks/Cole - Cengage
∆Hfo, standard molar
enthalpy of formation
H2(g) + 1/2 O2(g) H2O(g)
∆Hfo (H2O, g) = -241.8 kJ/mol
By definition,
∆Hfo
= 0 for elements in their
standard states.
73
© 2009 Brooks/Cole - Cengage
Enthalpy of Formation Practice• Show the ΔHf˚ reaction for the
following compounds:
a) C2H2(g)
b) KCl(s)
• Why is the following not a ΔHf˚?
4Na(s) + O2(g) 2Na2O(s)
74
© 2009 Brooks/Cole - Cengage
Hess’s Law and ΔHf° Practice
Given:
C2H2(g) + 5/2 O2(g) 2CO2(g) + H2O(l)
ΔHr° = -1300. kJ/mol-rxn
C(s) + O2(g) CO2(g) ΔHr° = -394. kJ/mol-rxn
H2(g) + ½O2(g) H2O(l) ΔHr° = -286. kJ/mol-rxn
Determine the ΔHf° for C2H2 (acetylene).
First, determine the overall reaction. Manipulate above reactions to obtain overall reaction.
75
© 2009 Brooks/Cole - Cengage
Hess’s Law and ΔHf° Practice
Answer:-1( ) C2H2(g) + 5/2 O2(g) 2CO2(g) + H2O(l)
76
© 2009 Brooks/Cole - Cengage
Using Standard Enthalpy Values
Using Standard Enthalpy Values
Use ∆H˚’s to calculate enthalpy change for
H2O(g) + C(graphite) H2(g) + CO(g)
(product is called “water gas”)
77
© 2009 Brooks/Cole - Cengage
Using Standard Enthalpy Values
Using Standard Enthalpy Values
H2O(g) + C(graphite) H2(g) + CO(g)
From reference books we find
• H2(g) + 1/2 O2(g) H2O(g)
∆fH˚ of H2O vapor = - 242
kJ/mol
• C(s) + 1/2 O2(g) CO(g)
∆fH˚ of CO = - 111 kJ/mol
78
© 2009 Brooks/Cole - Cengage
Using Standard Enthalpy Values
Using Standard Enthalpy Values
H2O(g) H2(g) + 1/2 O2(g) ∆Hro (= –∆Hr˚) =
+242 kJ
C(s) + 1/2 O2(g) CO(g) ∆Hro = -111 kJ
------------------------------------------------------------------------------------------------------
To convert 1 mol of water to 1 mol each of H2 and CO requires 131 kJ of
energy. The “water gas” reaction is ENDOthermic.
H2O(g) + C(graphite) H2(g) + CO(g)
∆Hronet = +131 kJ
H2O(g) + C(graphite) H2(g) + CO(g)
∆Hronet = +131 kJ
79
© 2009 Brooks/Cole - Cengage
Using Standard Enthalpy Values
Using Standard Enthalpy Values
In general, when ALL
enthalpies of formation are known,
Calculate ∆H of reaction?
∆Hro = ∆fHf
o (products)
- ∆Hfo (reactants)
∆Hro = ∆fHf
o (products)
- ∆Hfo (reactants)
Remember that ∆ always = final – initial
80
© 2009 Brooks/Cole - Cengage
Heats of Reactions(∆H⁰(r or rxn) = generic reaction)
• ∆H⁰combustion or ∆H⁰comb is amount of heat release when 1 mol of a substance is combusted (burned).
Ex: CH4 + 2O2 CO2 + 2H2O(g) ∆H = -890 kJ/mol
• ∆H⁰neutralization is the amount of heat released or absorbed when an acid is neutralized by a base
Ex: HCl(aq) + NaOH(aq) NaCl(aq) + H2O(l)
∆Hneut =-57 kJ/mol-rxn
81
© 2009 Brooks/Cole - Cengage
Heats of (Physical) Process (∆H⁰process = generic process)
• ∆H⁰solution is the amount of heat released or absorbed when a solid compound dissolves and becomes aqueous.
Ex: NaOH(s) Na+(aq) + OH-(aq) ∆H⁰sol = -43 kJ/mol• ∆H⁰fusion is the amount of heat needed to change 1
mole of a solid substance to a liquid, i.e. melting.
Ex: H2O(s) H2O(l) ∆H ⁰fus= 6.0 kJ/mol• ∆H⁰vaporization is the amount of heat needed to change 1
mole of a liquid to a vapor. Can use opposite too.
Ex: H2O(l) H2O(g) ∆H ⁰vap= 40.7 kJ/mol
82
© 2009 Brooks/Cole - Cengage
Using Standard Enthalpy Values
Using Standard Enthalpy Values
Calculate the heat of combustion of
methanol, i.e., ∆Hocomb for
CH3OH(g) + 3/2 O2(g) CO2(g) + 2 H2O(g)
∆Hocomb = ∆Hf
o (prod) - ∆Hf
o (react)
83
© 2009 Brooks/Cole - Cengage
Using Standard Enthalpy Values
Using Standard Enthalpy Values
∆Hocomb = ∆Hf
o (CO2) + 2 ∆Hf
o (H2O)
- {3/2 ∆Hfo
(O2) + ∆Hfo
(CH3OH)}
= (-393.5 kJ) + 2 (-241.8 kJ) - {0 + (-201.5 kJ)}
∆Hocomb = -675.6 kJ per mol of methanol
CH3OH(g) + 3/2 O2(g) CO2(g) + 2 H2O(g)
∆Hocomb = ∆Hf
o (prod) - ∆Hf
o (react)
84
© 2009 Brooks/Cole - Cengage
Using Enthalpies of Formation calculate the Enthalpy of Combustion for the reaction below.
C3H8(g) + 5O2(g)→ 3CO2(g) + 4H2O(l)
ΔH° = 3ΔH°(CO2) + 4 ΔH°(H2O(l))–[ΔH°(C3H8) + 5ΔH°f(O2)]
DHocomb = 3 (-393.5) + 4 (-285.8) – [-103.8 + 5(0)]
• DH˚comb= -2220 kJ
Standard Enthalpy Values Example
products reactantsr f fH n H m H
85
© 2009 Brooks/Cole - Cengage
ΔHrxn = ΔH1 + ΔH2 + ΔH3
86
© 2009 Brooks/Cole - Cengage
Using Enthalpy of Reaction
Think of reaction like this:
3C(s) + 4H2(g) 5O2 3C + 3O2 4H2+2O2
C3H8 + 5O2 3CO2 + 4H2O
ΔrH = -ΔHf1 – ΔHf2 + 3ΔHf3 + 4ΔHf4
= +3ΔHf3 + 4ΔHf4 – (ΔHf1 + ΔHf2)
-ΔHf1° -ΔHf2° 3ΔHf3° 4ΔHf4°
Formation of elements Regroup and form new substances
87
© 2009 Brooks/Cole - Cengage
Enthalpy Practice Problem
Calculate the standard enthalpy change for the reaction below using the standard enthalpies of formation.
2Al(s) + Fe2O3(s) Al2O3(s) + 2Fe(s)
ΔH°f’s: 0 -825.5 -1675.7 0(kJ/mol)