© 2003, Cisco Systems, Inc. All rights reserved. FWL 1.0—5-1 111 © 2003, Cisco Systems, Inc. All rights reserved.

  • Published on
    20-Dec-2015

  • View
    212

  • Download
    0

Transcript

  • Slide 1
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-1 111 2003, Cisco Systems, Inc. All rights reserved.
  • Slide 2
  • FWL 1.05-2 Module 5 Access Points
  • Slide 3
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-3 Overview This module covers basic access point (AP) installation and configuration. An access point acts as a communication hub for wireless network users. An access point can link wired and wireless networks together. The goal of this module is to get the AP configured and communicating with clients and other APs. It is important to keep the configuration simple until connectivity is achieved. Later in this module, more detailed port configurations and services will be covered
  • Slide 4
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-4 Learning Objectives Demonstrate the proper AP setup and connection Properly connect to the AP Demonstrate Configuration proficiency via IOS GUI Demonstrate Configuration proficiency via IOS CLI
  • Slide 5
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-5 Key terms VxWorks IOS Express Setup Home Page Power over Ethernet IPSU
  • Slide 6
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-6 Access Point Connection
  • Slide 7
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-7 Current AP Models Common to both the 1100 & 1200 Line Power-over-Ethernet IOS feature set Field-upgradable to.11g Plenum-rated Lockable mounting brackets Both can be ordered with IOS 1100 Series AP 802.11b only Plastic housing 2.4 GHz antenna: Integrated 2 dBi gain omni antenna Outstanding value 1200 Series AP Dual-band capable (802.11a+b) Rugged metal enclosure 2.4 GHz antenna: Choose among a variety of antennas that connect to APs external antenna connectors 5 GHz antenna: Integrated 6 dBi gain combo omni/patch antenna Outstanding performance
  • Slide 8
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-8 AP Power Options
  • Slide 9
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-9 Power Brick for 1100/1200
  • Slide 10
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-10 Inline Power Module for 350/1100/1200
  • Slide 11
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-11 Catalyst Powered Switch Options Powered Switches 35xx-PWR Powered Blades 6500 Series 4006 Series Inline Power Patch Panel
  • Slide 12
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-12 Connecting the 1200 Console Port Ethernet Port with or w/o power LinkTraffic DC Power
  • Slide 13
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-13 Connecting the 1100 DC PowerEthernet Port w/wo power No Console Port
  • Slide 14
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-14 LED Indicators Status Lights Ethernet Status Radio Activity Ethernet Activity Status Radio Activity
  • Slide 15
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-15 Connecting to the AP Console port Requires roll-over cable Telnet Requires an IP address Web Browser Requires an IP address To set an IP address: Use the default Use DHCP Use IPSU Set using Console port Console Port Telnet Web Browser
  • Slide 16
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-16 Using IPSU
  • Slide 17
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-17 Initial Web Browser Configuration For initial configuration: 1.Connect Ethernet crossover between PC and AP. 2.Configure PC with IP address 10.0.0.2/24 3.Browse to 10.0.0.1 (AP default IP) 4.Username/Password: Cisco/Cisco
  • Slide 18
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-18 Basic Configuration
  • Slide 19
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-19 Cisco Access Point GUI Comparison VxWorks GUI AP 1200 AP 340/350 BR350 IOS GUI AP 1200 AP 1100 AP 350 *
  • Slide 20
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-20 Cisco Access Point CLI Comparison VxWorks CLI AP 1200 AP 340/350 BR350 IOS CLI AP 1200 AP 1100 AP 350*
  • Slide 21
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-21 Assigning IP Address Using IOS CLI 1.Connect a console cable between PC and AP. (Use typical serial settings.) 2.Enter enabled mode: enable (Default password: Cisco) 3.Enter global configuration mode: config t 4.Enter interface configuration mode: interface bvi1 5.Assign IP address: ip address 6.End and save configuration: copy run start
  • Slide 22
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-22 Main Menu (HOME Page)
  • Slide 23
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-23 Express Setup Menu
  • Slide 24
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-24 Express Setup Menu
  • Slide 25
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-25 Association Table
  • Slide 26
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-26 Network Interfaces
  • Slide 27
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-27 IP Address
  • Slide 28
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-28 Ethernet Port Configuration
  • Slide 29
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-29 FastEthernet Status
  • Slide 30
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-30 FastEthernet Settings
  • Slide 31
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-31 AP Radio Port Configuration
  • Slide 32
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-32 Radio Status
  • Slide 33
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-33 Radio Detailed Status
  • Slide 34
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-34 Radio Settings
  • Slide 35
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-35 Radio Settings (cont)
  • Slide 36
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-36 Radio Settings (cont)
  • Slide 37
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-37 Radio Settings (cont)
  • Slide 38
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-38 Radio Link Test
  • Slide 39
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-39 Configure Services
  • Slide 40
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-40 Services Page
  • Slide 41
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-41 Hot Standby
  • Slide 42
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-42 CDP
  • Slide 43
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-43 SNMP
  • Slide 44
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-44 SNMP
  • Slide 45
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-45 Configure Filters
  • Slide 46
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-46 Filters
  • Slide 47
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-47 MAC Address Filters
  • Slide 48
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-48 IP Filters
  • Slide 49
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-49 IP Filters
  • Slide 50
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-50 EtherType Filters
  • Slide 51
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-51 Proxy Mobile IP
  • Slide 52
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-52 Proxy Mobile IP Devices A visiting client device that can associate to an AP. It does not need any special proxy Mobile IP software. An AP with proxy Mobile IP enabled. An authoritative AP on your network supporting proxy Mobile IP. The authoritative AP uses a subnet map to keep track of the home agent information for all visiting client devices. A home agent. The home agent is a router on the visiting clients home network that serves as the anchor point for communication with the AP and the visiting client. The home agent tunnels packets from a correspondent node on the Internet to the visiting client device. A foreign agent. The foreign agent is a router on your network that serves as the point of attachment for the visiting client device when it is on your network, delivering packets from the home agent to the visiting client
  • Slide 53
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-53 Proxy Mobile IP
  • Slide 54
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-54 Proxy Mobile IP SA Bindings
  • Slide 55
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-55 Proxy Mobile IP Caveats You can enable proxy Mobile IP only on root APs. APs should be configured with gateway addresses. The foreign and home agents must reside on the network gateways where you want to support proxy Mobile IP. If your authoritative APs receive their IP addresses through DHCP, use the access point host names to specify the AAPs in the proxy Mobile IP configuration. Proxy Mobile IP does not support broadcast and multicast traffic for visiting clients. To use Proxy Mobile IP with DHCP clients, disable Media Sense on the client. Does not support VLANs.
  • Slide 56
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-56 Proxy Mobile IP Statistics
  • Slide 57
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-57 QoS
  • Slide 58
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-58 QoS Configuration WLAN QoS differs from QoS on other Cisco devices: Does not classify packets Do not match packets using ACLs Do not support ISL Difference is most notable on busy networks. You should be familiar with your network traffic before configuring QoS. QoS does not create additional bandwidth.
  • Slide 59
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-59 QoS Policies
  • Slide 60
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-60 Apply QoS to Interface/VLANs
  • Slide 61
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-61 Traffic Class Definition
  • Slide 62
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-62 System Software
  • Slide 63
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-63 System Software
  • Slide 64
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-64 Software Upgrade
  • Slide 65
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-65 System Configuration
  • Slide 66
  • 2003, Cisco Systems, Inc. All rights reserved. FWL 1.05-66 Summary A variety of tools are available to configure an AP. The Web browser is usually the easiest way to configure an AP. The 1100 and 1200 also can be configured via Cisco IOS. Future APs will also support Cisco IOS.
  • Slide 67
  • 67 2003, Cisco Systems, Inc. All rights reserved.

Recommended

View more >