Upload
melody-tang
View
532
Download
0
Embed Size (px)
Citation preview
1
PRODUCT CATALOGUE CABLE
EN 2015 V2
USB TYPE C PLUG & Cable
SHENZHEN LITKCONN TECHNOLOGY CO., LTD
USB TYPE C Full-Featured Plug
Comply with USB 3.1 Gen1、Gen2 standard, can be used for USB Full-Featured Type-C Standard
Cable Assembly , one end with E-mark,the other without E-mark (PCB soldering ), transmission
can be reached to 10Gbps, current Max. 5A,Voltage 20V, Power 100W
1:Charging
Can be connected with power adapter to charge the device , can either charge the peripherals. It
can automatically detect the current required.
2:Data transmission
Be subject to the USB standard speed rate which the device supports, can be down compatible with
GEN1 C TO C 、2.0 C TO C Cable.
3: Video & Audio data interface
Can replace other connectors , for example HDMI,VGA,DVI……..
With the mature of the technology and the simplification of the technique , USB Full-Featured
Type-C will become the mainstream of future connecting solution.
USB TYPE C 3.1 Plug
Comply with USB 3.1 standard, transmission speed 5Gbps, current max. 3A,voltage 5V, can be used
for below Cable & Adaptor.
❶ TYPE C Plug TO TYPE A Plug Charging & Data Cable
A Plug as the HOST with DFP working mode. The cable has two models(USB3.1 GEN1 5Gbps/s,
U SB2.0 480MHZ/S) . Speed subject to the device & cable standard ( USB3.1 GEN1/USB2.0 )
❷ TYPE C Plug TO TYPE B Plug Data Cable
C Plug as the HOST with UFP working mode . The Cable has two models (USB3.1 GEN1 5Gbps/s,
U SB2.0 480MHZ/S).
TYPE C Plug insert to the main device, TYPE B Plug inert to the printer or HUB, can conduct data
transmission and printing function. The Speed rate depends on the device and which data cable to be
used USB3.1 GEN1/USB2.0.
❸ TYPE C Plug TO MICRO B Plug Data Cable
C Plug as the HOST with UFP working mode. The cable has two models ( USB3.1 GEN1 5Gbps/s,
USB2.0 480MHZ/S).
TYPE C Plug insert to the main device, MICRO B Plug insert to the device with MICRO B
RECEPTACLE , such as Smart phone , Tablets. Can conduct power charging and data transmission.
The current can be detected automatically, Max. 5V/3A. Speed rate depends on the device and which
models to be used USB3.1 GEN1/USB2.0.
❹ TYPE C Plug TO MINI B Plug Charging Data Cable
C Plug as the HOST with UFP working mode. The cable has only one model. USB2.0 480MHZ/S.
TYPE C Plug insert to the main device, MINI B Plug inserts to the corresponding device with MINI B
RECEPTACLE, for example camera, portable audio / video device. Can conduct the power charging
and data transmission. Speed rate depends on the device and the cable standardUSB2.0.
❺TYPE C Plug TO A RECEPTACLE charging and data cable
C plug as the HOST with UFP working mode. The cable has two models (USB3.1 GEN1 5Gbps/s,
USB2.0 480MHZ/S).
TYPE C Plug insert to the main device , TYPE A RECEPTACLE connects to the corresponding device
with TYPE A Plug interface, for example Smart phone, Tablets. Can conduct power charging and data
transmission. The current can be detected automatically, Max. 5V/3A. Speed rate depends on the
device and which models to be used USB3.1 GEN1/USB2.0.
❻TYPE C Plug TO MICRO B 2.0 RECEPTACLE Charging and Data Cable
C plug as the HOST with UFP working mode. The cable has only one model USB2.0 480MHZ/S.
TYPE C Plug inserts to the main device, MICRO USB RECEPTACLE connects to the corresponding
device with MICRO USB Plug interface, such as Smart phone, Tablets. Can conduct power charging
and data transmission. The current can be detected automatically, speed rate supports USB2.0.
Note:All the above with USB TYPE C Gen1 Plug, whatever Cable or Adaptor, should
connect the resistor in the designated position by the TYPE C Plug to detect the current.
Different current has different resistor. If the resistor is improperly used, will be risky of
damaging the device. Therefore, USB TYPE C Gen1 Plug has different spec(PCB circuit and
components ), default max. current 3A.
USB TYPE 2.0 Plug
Comply with USB TYPE C 2.0 standard. Can be used for TYPE C 2.0 TO TYPE
C 2.0 charging Data Cable, no need PCB to convert and be soldered to the
harness directly.