View
58
Download
3
Embed Size (px)
Citation preview
Products Solutions Services
Application / FunctionOverview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Technical DatasheetTD 00043E/24/EN/01.13
• Suitable for hygienic applications• Surface finish Ra ≤ 0.8 µm• Three buttons for local set-up, via
ReadWin® 2000 configuration software or FieldCare
• Stainless steel housing 316L• Exchangeable modular process
connections
Complete product information:www.e-direct.us/ptp35
Specs at a glance:
•Product: Liquids, vapors and gases
•Measuring range - limits: 0 to 15 psi (1 bar), 0 to 600 psi (40 bar)
•Accuracy: < 0.5 %•Filling oil: FDA-conformity•Product temperature:
-40 to +212 °F; 275 °F max. 1 h (-40 to +100 °C; 135 °C max. 1 h)
•Outputs: 1 or 2 PNP or 1 PNP with 4 to 20 mA
Hygienic pressure switch for absolute and gauge pressures
CeraphantTPTP35
$ 330.00
1)
p
2)
CeraphantTPTP35 2
Overview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Application / Function
Application The Ceraphant T PTP35 is a pressure switch designed for the monitoring and control of absolute and gauge pressures in hygienic applications. It is available with a wide range of process connections and is suitable for finely graduated measuring ranges from vacuum to 40 bar (600 psi).
ApplicationexampleFunction The process pressure acts on the metallic sensor diaphragm and the pressure-dependent change in capacitance of the ceramic sensor is measured. A microprocessor evaluates the signal and provides an appropriate output.
1×PNP switch output1) Power supply2) Load (e. g. programmable logic
controller, process contol system, relay)
CeraphantTPTP35 3
Application / FunctionOverview Dimensions
Electrical connection Price table ContactGo to shop
Technical data
Technicaldata
OutputOutput signal 1 or 2×PNP or 1×PNP with 4 to 20 mAVoltage drop PNP ≤ 2 VOverload protection Automatic testing of switching current
Power supply Ub
Supply voltage 12 to 30 V DCCurrent consumption Without load < 60 mA, reverse polarity
protection
Performance characteristicsReference conditions According to DIN IEC 60770/61003Measured error < 0.5 %Long-term drift ≤ 0.15 % per yearSensor response time ≤ 20 msAnalog output Non-linearity: ≤ 0.2 % (limit point method)
Non-conformity: non-linearity + hysteresis +non-repeatability: ≤ 0.5 % (limit point method)
Operating conditionsMedium temperature -40 to 212 °F (275 °F max. 1 h)
(-40 to +100 °C (+135 °C max. 1 h))Ambient temperature -40 to 185 °F (-40 to +85 °C)Storage temperature -40 to 185 °F (-40 to +85 °C)Degree of protection M16×1.5 valve plug: IP 65
M12×1 connector: IP65 (gauge press.), IP66 (absolute press.)Cable: IP 66
Vibration resistance 20 g to DIN 68-2-6 (10-2000 Hz)EMC Interference emission as per EN 61326 class
B electrical equipment, interference immunity as per EN 61326 appendix A (industrial use)
Materials of constructionProcess connection 316L/Ra ≤ 0.8 μm; housing 316LFilling fluid FDA-conform oilSeals EPDM, without (DA8, BB8)
OperationOperating elements 3 buttons or PC and software
Approvals3ADesina compliant3.1.B certificates on request.
CeraphantTPTP35 4
Application / FunctionOverview Technical data
Price table ContactGo to shopElectrical connection
Dimensions
Dimensions(ininches)
1.54
2.05
2.05
2.05
4.13
0.43
2.56
0.94
0.94
0.94
M16×1.5 connector / ½ NPT valve plugM12 ×1 connector
1.42
AF 27 mm(for 400 bar/6000 psi sensor AF 32 mm)
Ø 1.52
Ø 1.67
Cable 16.4 ft
Installation according to instruction manual.
Housing
0.67
0.33
0.39
0.67
Tri-Clamp ISO 2852DN 25...DN 38 (1"...1½" )
Tri-Clamp ISO 2852DN 40...DN51 (2" )
Process connections
Ø 2.22Ø 2.52
Ø 1.71Ø 1.99
SW 28AF 28 mm
SW 28AF 28 mm
A1
A2
A3
B
R
2
3
1
4
2
3
1
4
R1
R1
L+
L–
L+
L–R2
2
3
3
1
1
2
4
L+
L–
L+
L–
R14…20 mA
Electricalconnection
DC voltage version with M12×1 connectorA1: 1×PNP switch outputA2: 2×PNP switch outputA3: PNP switch output with additional analog output DC voltage version with valve plug M16×1.5B: 1×PNP switch output DC voltage version with cableA1: 1×PNP switch outputA2: 2×PNP switch outputA3: PNP switch output with additional analog output Cable specification: 5-core (5 × 0.22 mm²);Colors: 1 = brown, 2 = white, 3 = blue, 4 = black, ground = green/yellow
CeraphantTPTP35 5
Application / FunctionOverview Technical data Dimensions
Electrical connection ContactGo to shopPrice table
Pricetable
Ceraphant PTP35 Order no. Price/pcs. in USDPower Supply; Output Electrical Connection 1 to 5 6 to 10 11 to 3512-30 V DC; PNP switch 3-wire
Plug M12, IP65 gauge, IP66 absolute PTP35-A1A1 3 4A 375.00 349.00 330.00Valve plug M16 ISO4400, IP65 PTP35-A2A1 3 4A 402.00 374.00 354.00Cable 5 m, IP66 PTP35-A4A1 3 4A 423.00 393.00 372.00
12-30 V DC; 2x PNP switch 4-wire
Plug M12, IP65 gauge, IP66 absolute PTP35-A1B1 3 4A 402.00 374.00 354.00Cable 5 m, IP66 PTP35-A4B1 3 4A 450.00 419.00 396.00
12-30 V DC; PNP switch + 4-20 mA 4-wire
Plug M12, IP65 gauge, IP66 absolute PTP35-A1C1 3 4A 461.00 429.00 406.00Cable 5 m, IP66 PTP35-A4C1 3 4A 509.00 473.00 448.00
Plug and cable to be ordered as ‘accessory’* Please add code for measuring range. ** Please add code for process connection.
Accessories Order no. Price/pcs. in USDWeld-in adapter G1, d=60, 316L Flush mount process connection. Seal: Silicone O-ring.
52001051 88.00
M12 socket for plug. 5 m cable PVC, Cu Sn/Ni lock. 52010285 13.00Configuration kit for PC-programmable devices. Set-up programme + interface cable for PC with USB-Port.
TXU10-AA 204.00
Socket for plug 4p-125V, 4A-M12 52006263 22.50M12 elbow plug ready for cable, IP67,PG7 51006327 16.00Prices valid until 09.30.2013 in U.S. dollars per unit (not including shipping and applicable sales tax).See Endress+Hauser, Inc. Terms and Conditions of Sale for shipping, tax, and payment terms.
Complete product information:www.e-direct.us/ptp35
***
Process connections
Code ThreadDB Tri-Clamp ISO2852 DN25-38 (1...1-1/2”),
316L, EHEDG, 3A, DIN32676 DN25-40DL Tri-Clamp ISO2852 DN40-51 (2”),
316L, 3A, EHEDG, DIN32676 DN50
**
Measuring Range
Code Gauge pressure Overload3H 0… 1 bar, 0… 100 kPa 4 bar 3M 0… 4 bar, 0… 400 kPa 16 bar 3P 0… 10 bar, 0… 1 000 kPa 40 bar 3S 0… 40 bar, 0… 4 000 kPa 160 bar
Negative gauge pressure7H -1… +1 bar, -100… +100 kPa 4 bar 7M -1… +4 bar, -100… +400 kPa 16 bar 7P -1… +10 bar, -100… +1 000 kPa 40 bar
Absolute pressure4H 0… 1 bar, 0… 100 kPa 4 bar 4M 0… 4 bar, 0… 400 kPa 16 bar 4P 0… 10 bar, 0… 1 000 kPa 40 bar 4S 0… 40 bar, 0… 4 000 kPa 160 bar
*
Moreproductstocompleteyourmeasuringpoint… TemperatureswitchThermophant T TTR35
FlowswitchFlowphant T DTT35
CompactthermometerEasytemp TMR35
Application / FunctionOverview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Contact
E-directEndress+Hauser, Inc.2350 Endress PlaceGreenwood, IN 46143
Direct order
Internet www.e-direct.usby phone 888- EH-DIRECT
(343-4732)per Fax 317-535-8498E-Mail [email protected]