Upload
bcj-controls
View
182
Download
2
Embed Size (px)
Citation preview
SOLAR PROTECTION RELAYCOMAP MAINSPRO | ABB CM-UFD.M33 | COMAP INTELIPRO PV
Solar Protection Specialist n Australia
BCJ Controls
COMAP MAINSPRO
• The ComAp MainsPro solar protection relay is
used for grid-tie applications, and provides anti-
islanding protection as required by Distribution
Network Service Providers for solar over 30 kW.
It can be used with any embedded generator
systems such as gen sets, co-generation, or
renewable energy sources including photovoltaic
plants or wind turbines. The ComAp MainsPro
grants adjustable voltage, frequency, and loss of
mains functions to safeguard the distribution
network and the generators.
COMAP MAINSPRO
• With ComAp MainsPro, no special knowledge is needed for the installation process
and no additional units are required. This makes it an optimal solution for both
untrained personnel and professionals. The unit is designed to comply
completely with Utilities’ connection requirements and statutory codes, offering a
high level of protection and safety when working in parallel to the mains.
• This item can be used within our secondary protection units which come as a
switchboard ready to connect inverter cabling to. Have a look
ABB CM-UFD.M33
• The ABB CM-UFD.M33 is a multifunctioning grid
feeding monitoring relay. It trips the section switch
that is connected between the distributed
generation and the public grid allowing the
distributed generation to disconnect in case of
problems (e.g. unstable grid), faults, or grid
maintenance. The device provides different
monitoring services to detect 10-minutes average
overvoltage, real time over- and under-voltage as
well as over- and under-frequency. Additionally,
monitoring of vector shift and ROCOF (rate of
change of frequency) can be configured to trip the
generation in a case of loss of mains.
COMAP INTELIPRO PV
• The ComAp IntelliPro PV is a very flexible
interconnection and mains decoupling protective
relay. With its extensive protective functions, it
meets the strictest utility interconnection
requirements and can be used in a large range of
distributed generation applications. This relay
combines standard and optional features to
protect decentralized energy investments. It is an
ideal solution for smart applications due to its
advanced communications, remote monitoring,
and data logging.
SOLAR PROTECTION INSTALLER
BCJ CONTROLS
• BCJ Controls - commercial solar network protection unit - switchboard
manufacturing including protection relay & anti-islanding and zero export devices.
BCJ Controls is a solar technology company set up by ex-utility industrial sparkies.
Between them they have a large amount of experience in electrical grid protection,
as well as dealing with utilities on a day-to-day basis.
• At BCJ Controls we produce Secondary Protection Switchboards with solar
protection relays for Commercial Solar over 30kW grid connections.
CONTACT US:
BCJ Controls
2,17 Lorraine St, Peakhurst NSW Australia 2210
(02) 9534 8465
www.bcjcontrols.com.au