Access Solutions Brochure

www.essentracomponents.com

Access Solutionswww.essentracomponents.com

AustraliaTel : +61 02 96380100Fax : +61 02 96844521sales@essentracomponents.com.auwww.essentracomponents.com.au

China Tel : +86 400 679 3666Fax : +86 400 679 [email protected]

IndiaTel : +91 (0) 80 4545 3676Fax : +91 (0) 80 4545 [email protected]

JapanTel : +81 45 321 2752Fax : +81 45 410 [email protected]

MalaysiaTel : +60 4 6435 846Fax : +60 4 6438 370Toll free: 1800 88 [email protected]

Singapore Tel : +65 6841 3266Fax : +65 6841 [email protected]

ThailandTel : +66 2 81 99 501 Fax : +66 2 81 99 [email protected]

Group Code: 206 Swing Handle

BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30HANDLE: Polyamide DIN-EN ISO1043-1 PA6GFR 30CYLINDER: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelSEAL: Rubber

• Sliding dust cover• Ergonomic handle• Padlockable version available• 40 mm Euro Profile cylinder fitted

• Large version available• For steel and polyester cabinets• 40 mm Euro Profile single-cylinder fitted• Padlockable version available

APPLICATIONSElectric panels, machinery covers

Mesan was acquired by Essentra in 2014 and forms part of the Components division. Essentra focuses on the manufacture and distribution of high-volume, essential components, which serve customer in a wide variety of end markets and geographies.

ELECTRICAL ENCLOSURES

A wide range of locks, hinges and accessories for indoor and outdoor cabinets, all with excellent security

1IT ENCLOSURES

High-security products that protect an organisation’s data

GENERATORS-COMPRESSORS

Heavy-duty products with numerous benefits including noise isolation and reducing vibration

INDUSTRIAL MACHINERY

Cost-effective machine safetyproducts that provide real value

Padlock applicationSpecial sliding cover is available for padlockable version

APPLICATIONSElectric panels, machinery covers, rack cabinets

Group Code: 001 Swing Handle


BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30HANDLE: Polyamide DIN-EN ISO1043-1 PA6 GFR 30CAM: SteelSEAL: Polyurethane

32

www.essentracomponents.com www.essentracomponents.com

Group Code: 102

Group Code: 502

Swing-Handle Gear

Swing-Handle Gear Box

BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30HANDLE: Polyamide DIN-EN ISO1043-1 PA6 GFR 30MECHANISM: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelSEAL: Polyurethane

BODY: Zamak DIN-EN1774-ZnAl4Cu1HANDLE: Zamak DIN-EN1774-ZnAl4Cu1MECHANISM: Zamak DIN-EN1774-ZnAl4Cu1SEAL: Polyurethane

• Swing handle for steel and polyester cabinets• 40 mm Euro Profile single cylinder fitted• Padlockable version available

• Die-cast construction stronger than polyamide• Thin external profile, 14.4 mm, for flush appearance• High-security, brass, Euro Profile single-cylinder

available• Dust cap available• Padlockable version available• Stainless steel version available

Dust cap and padlockable versions available

For different colours, contact us now!

For 42 mm Euro Profile single cylinder, contact us now!

Group Code: 063 Cam Lock

• Quarter-turn operation• Body length 20.5 mm (Please be sure to order

appropriate cam)• Available in all die-cast zinc alloy or with polyamide

housing


Group Code: 016 Push-to-Close Lock

Striking plate- Custom sizes available

HOUSING: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30CAM: Steel or PlasticGASKET: Rubber


APPLICATIONSElectric panels, outdoor cabinets

BODY: SteelHANDLE: SteelCAM: BrassSCREW: Stainless steelSEAL: PolyurethaneFINISH: Black coated

• Slam-shut operation• Brass cam• Striking plate required• Can open from inside by moving cam

APPLICATIONSGenerators, compressors, electric panels, machinery covers

54


Group Code: 072

Group Code: 071

Functional Lock

Sliding Lock

BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30CAM: Steel or PA6 GFR 30

BODY: ABSSPRING: Stainless Steel

• Suitable for steel and polyester panels• Standard cut out for both versions• Clip fixing version suitable for panels with thickness

of between 0.8 mm and 2 mm

• Easy fixing• Long-lasting stainless steel spring• Suitable for panel thicknesses of between 0.8 mm

and 1.5 mm

Group Code: 077

Group Code: 060

Compression Lock

Quarter Turn - Spring Loaded Lock

HOUSING: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30DRIVER: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30CAM: Steel or PlasticGASKET: RubberFINISH: Chrome or Black coated

• Specially designed internal spring provides 1.5 mm of compression

• Cam does not rotate beyond quarter turn due to stop lip



APPLICATIONSSmall metal machinery covers

BODY: Zamak DIN-EN1774-ZnAl4Cu1HANDLE: Zamak DIN-EN1774-ZnAl4Cu1FIXING BRACKET: Steel

• Available with or without cylinder• 24mm – 46mm grip adjustment• Suitable for maximum 2 mm door thickness• Assemble lock with one fixing bracket• Stainless steel version available

APPLICATIONSGenerators, compressors, electric panels, machinery covers

76


Group Code: 362 Group Code: 064 Quarter Turn-Wing Knob

Compression Lock

Quarter Turn-Wing Knob

Group Code: 050 Cam Lock Group Code: 040

HOUSING: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30KNOB: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30CAM: Steel or PlasticGASKET: RubberFINISH: Chrome or Black coated

HOUSING: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelFINISH: Chrome plated

Wing operates lock and serves as knob

• Special index action to assist locking and keep cam in position

• Stable in open position

HOUSING: Zamak DIN-EN1774-ZnAl4Cu1DRIVER: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelGASKET: RubberFINISH: Chrome or Black coated

• Used for cabinets that require better sealing under vibrating conditions

• 6 mm of compression• Wide grip range with adjustable screw• Noise isolation• Different drivers / cams available



HOUSING: Zamak DIN-EN1774-ZnAl4Cu1DRIVER: Zamak DIN-EN1774-ZnAl4Cu1CAM: Zamak DIN-EN1774-ZnAl4Cu1GASKET: RubberFINISH: Chrome or Black coated

• For soundproof or isolated doors• Tight closure achievable with 270° cam rotation

and stepped cam• Lock supplied with standard housing

APPLICATIONSCentral air conditioning units, isolated panels

APPLICATIONSE lec t r ic pane ls , mach iner y covers , ra i lway applications, construction equipment.

98


Group Code: 065 Quarter Turn- Wing Knob Cam Lock - T Handle

Group Code: 340 Group Code: 013Compression Lock-Wing Knob Fire-Hose Cabinet Lock

Group Code: 110

HOUSING: Zamak DIN-EN1774-ZnAl4Cu1KNOB: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelGASKET: RubberFINISH: Chrome or black coated

HOUSING: Zamak DIN-EN1774-ZnAl4Cu1CAM: Steel or PlasticGASKET: Rubber

• Used for cabinets that require better sealing under vibrating conditions

• Provides 6 mm of compression• Provides noise isolation• Standard cams without stopper required for these

locks

• Quarter-turn operation• Available in all die-cast zinc alloy or with polyamide

wing knob and housing• Optional blind version

HOUSING: Zamak DIN-EN1774-ZnAl4Cu1CAM: Steel or PlasticGASKET: Rubber

• Quarter-turn operation• Available in all die-cast zinc alloy or with polyamide

wing handle and housing• Optional blind version• Stainless steel version available

APPLICATIONSRailway applications, construction equipment, electric panels, machinery covers


BODY: Zamak DIN-EN1774-ZnAl4Cu1KNOB: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelFIXING PLATE: Steel

• Designed for fire-hose cabinets• Special fixing-plate supplied for easy fixing• Flush design provides flat surface on cabinet• Customized colours available

APPLICATIONSFire hose cabinet


1110


Group Code: 193

Group Code: 493

Group Code: 194Side Hinge (16 mm) Concealed Hinge

Side Hinge Group Code: 995 Concealed Hinge

• Side-mounted hinge• Brass 16 mm parts• Parts tightly fitted• Stainless steel version available

BODY: Zamak DIN-EN 1774-ZnAl4Cu1Pin (Version 1): Zamak DIN-EN1774-ZnAl4Cu1Pin (Version 2): Stainless Steel

• Lift-off hinge• Suitable for left- and right-hand applications• Maximum hinge rotation 180°• For heavy doors, version 2 is recommended due to

its stainless steel properties

BODY: SteelWELDING PART: Zamak DIN-EN1774-ZnAl4Cu1

FINISHBODY: Zinc platedWELDING PART: Zinc plated

• Suitable for heavy-duty applications• Suitable for left- and right-hand applications• Suitable for 25 mm bend door cabinets• Door part can be removed by a screw


BODY: Zamak DIN-EN1774-ZnAl4Cu1FIXED PART: SteelBODY FINISHING: Zinc platedWELDING PART: Copper plated

• For doors with a bend of between 18 mm and 27 mm• Centre part copper plated for easy welding• The centre part available in different versions



1312


Group Code: 295

Group Code: 289

Group Code: 097

Group Code: 600

Concealed Hinge

Concealed Hinge

Corner Hinge

HVAC Hinge (2D)

MATERIALSteel

FINISHBODY: Zinc platedWELDING PART: Copper plated

BODY: Stainless Steel (AISI 304)PIN: Stainless Steel (AISI 303)

• For internally mounted doors• Spring-loaded hinge for easy door removal• Both versions either screwed or welded on• Suitable for left- and right-hand applications

BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: SteelBEARING: DelrinFINISH: Black coated

• Designed for plain, side-mounted doors• For side-mounted doors with a bend of 0-15 mm• Hinge supplied pre-assembled to decrease labour

costs• Two-dimensional door adjustments possible• Axial adjustment is ± 2 mm. Radial adjustment is ± 1 mm

FIXED, MOVABLE PARTS: Zamak DIN-EN1774-ZnAl4Cu1PIN: Steel or poliasetal (Delrin)FINISH: Chrome plated or black coated

• Corner hinge• Suitable for steel panels with a thickness of

between 1.0 mm and 2.2 mm• Hinge pin available in three types• Stainless steel version available

APPLICATIONSSmall electric panels

APPLICATIONSCentral air conditioning units, electric panels, machinery covers

• For doors with a bend of between 20 mm and 24 mm• Frame part screwed on, door part welded on• Suitable for left- and right-hand applications• Stainless steel version available


1514


Group Code: 299

Group Code: 399

Group Code: 1399

Group Code: 899

Leaf Hinge Leaf Hinge

Leaf Hinge Leaf Hinge

BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: Stainless Steel


• Generally used for plain /flush-mounted, isolated, heavy doors

• Stud versions fitted with M8 x 14 mm threaded stud

• Stainless steel (AISI 304) hinge pin• Available in three sizes, stud fixing: – 80 mm x 70 mm – 80 mm x 110 mm – 80 mm x 150 mm

APPLICATIONSGenerators, machinery covers, electric panels

• Generally used for plain / flush mounted doors• Stud versions fitted with M5 x 8.5 mm threaded

stud• Stainless steel (AISI 304) hinge pin.• Maximum hinge rotation 270°• Stainless steel version available

APPLICATIONSElectric panels, built-in covers


• Generally used for plain /flush-mounted, isolated heavy doors

• Stud versions fitted with M8 x 14 mm threaded stud

• Stainless steel (AISI 304) hinge pin• Available in three sizes, hole or stud fixing: – 60 mm x 60 mm – 60 mm x 90 mm – 60 mm x 120 mm

BODY: SteelPIN: SteelFINISH: Zinc plated or black coated

• Heavy-duty lift off hinge• Suitable for left- and right-hand applications• Opening angle 180°



1716


Group Code: 2399

Group Code: 2199

Group Code: 800

Group Code: 599

Adjustable Torque Hinge HVAC Hinge (3D)

Torque Hinge Leaf Hinge

BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30SCREWS AND NUTS: Stainless Steel (AISI 304)

BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: SteelBEARING: DelrinFINISH: Black coated

• Suitable for three-dimensional door adjustment• Can be used for flush doors

APPLICATIONSCentral air conditioning units, electric panels, machinery covers

• Hinge torque can be adjusted with screw• Provide position control• Suitable for left- and right-hand applications• Fixed with M4 screw

APPLICATIONSGenerally used for plain /flush-mounted doors

BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: Steel

• 3.4 Nm symmetric torque• Over 25,000 cycle life within ± 20% of static torque

specification• Suitable left- and right-hand applications• M5 screw mounting

BODY: Stainless Steel (AISI 304)PIN: Stainless Steel (AISI 303)

• Generally used for plain / flushmounted, isolated, heavy doors

• Both parts attached by screws or nuts and bolts• Hinge Rotation angle 180°

APPLICATIONSGenerators, machinery covers, electric panelsAPPLICATIONS

Display panels, office equipment, medical equipment, industrial


1918


Group Code: 085 Group Code: 387

Group Code: 287 340.09.202

Drawer Handle Cover Handle

Cover Handle Gasketing

Group Code: 086 340.09.002Cover Handle Gasketing

For different colours and dimensions, contact us now!

FIXING PART: Polyamide DIN-EN ISO1043-1 PA 6 GFR 30HANDLE: Aluminium

• Grip range: 2.0 - 4.0mm• 50m / roll• Over 60 types available

Black EPDMPolyamide DIN-EN ISO 1043-1 PA 6 GFR 30

Zamak DIN-EN 1774-ZnAl4Cu1FINISH: Chrome or black coated

FIXING PART: Polyamide DIN-EN ISO1043-1 PA 6 GFR 30HANDLE: Plastic-coated steel

APPLICATIONSWooden and metal furniture

Stylish handle for keyboard shelf in rack cabinets

APPLICATIONSMachinery covers

• Plastic-coated steel tube• Centre supports should be used for handle lengths

of 1000 mm or more


• Two different fixing types • Grip range: 1.0 - 3.0mm• 100m / roll• Over 60 types available


• Ergonomic elliptical geometry• Matte anodized aluminium

Black EPDM

For different colours and dimensions, contact us now!


2120


340.09.210

340.09.902

340.09.678

Gasketing

Gasketing

Gasketing

Our products are developed with the current and future needs of our customers in mind. Our main objective is to be a solutions partner for our customers, by delivering a full range of products with different styling, colours, materials and functionality.

Your Solutions Partner

Black EPDM

Black EPDM

Black EPDM


• Width: 7.5mm, Height: 16.6mm• 100m / roll• Over 60 types available


R&D and Production

Quality

Our quality system is ISO 9001-2008 certified and our products are manufactured to comply with RoHS standards. We meet our obligations concerning the Registration, Evaluation, Authorisation, andRestriction of Chemicals (REACH).

Our access solutions product range can be customised to meet your needs. In addition to this catalogue you may also be interested in our standard parts catalogue detailing an extremely broad range of components available for immediate dispatch.

Devices & Hardware

Access Solutions Brochure