Embed Size (px)
Citation preview
STAPLED GLUED FLOATING
INSTALLATION AREAS
INSTALLATION METHODS
FEATURES & BENEFITS
Superior stability than a traditional hardwood by its construction
Superior soundproofing
Superior wear layer
100 % Made in Canada
Perfect for wood-frame new constructions
No toxic volatile organic compounds (VOCs)
Random board lengths for a more natural look
SUGGESTED SUBFLOORS
SoundLoc 2.0, PreVap or an equivalent accepted by the NWFA*.
* National Wood Flooring Association
SoundLoc 2.0 PreVap
AVAILABLE SPECIES
ENGINEERED FLOOR COMPOSED OF REAL SAWN HARDWOOD TOP LAYER ≈5/32” (4MM) WITH RESISTANT SOLID VERTICAL QUARTERSAWN SOFTWOOD FILLETED CORE ≈19/32” (15MM).
Note: Information subject to change without notice. Refer to preverco.com for the latest information.
HOUSE CONDO
RADIANT HEAT:YES
(except for exotic species)
HARDNESS OF SPECIES (COMPARED TO RED OAK)
%
JANKA TEST
JATOBA
CABREUVA
TIGERWOOD
HICKORY
SAPELE
HARD MAPLE
WHITE OAK
ASH
RED OAK
YELLOW BIRCH
WALNUT
CHERRY
(2820)
(2200)
(2160)
(1820)
(1500)
(1450)
(1290)
(1260)
(1010)
(950)
(1360)
(1320)
219%
171%
167%
141%
116%
112%
100%
98%
78%
74%
105%
102%
MAPLE RED OAK WALNUT HICKORY
APPLICABLE STANDARDS
SURFACE BURNING (ASTM-E-84):
• FSI (Flame-Spread index) 95 to 155 Class C (depending on species)
• SD (Smoke Development) 95 to 400 (depending on species)
SURFACE BURNING (ULC-S-102-2):
• FSV (Flame-Spread value) 65 to 155 (depending on species)
• SDC (Smoke Development Classification) 270 to 485 (depending on species)
CRITICAL RADIANT FLUX (ASTM-E-648-94A):
0,42 to 0,65 W/cm2 (depending on species)
FORMALDEHYDE EMISSION (ASTM-E-1333-02): < 0,01 ppm
FORMALDEHYDE EMISSION (BS EN 120:1992): 1,5 mg/100 g (Class E1) (depending on species)
VOC TOTAL (ASTM-D-6670-01):
< 0.011 ppm (depending on species)
SFI-01251
PEFC/26-31-71
Promoting Sustainable Forest Management
www.pefc.org
SFI-01251
PEFC/26-31-71
Promoting Sustainable Forest Management
www.pefc.org
SFI-01251
PEFC/26-31-71
Promoting Sustainable Forest Management
www.pefc.org
RECOMMENDATIONSConduct a moisture test in different areas of the subfloor and record your readings. For plywood and OSB subfloors, the percentage moisture difference between the hardwood floor and the subfloor must not exceed 2 points with a maximum of 12 % for the hardwood. For concrete subfloors, the moisture content of the concrete should never exceed 4 %. The installer and the floor owner are both responsible for measuring the moisture content of the subfloor and making sure it is within the recommended level prior to installation.
PACKAGING DETAILS
Packaging 4 1/4” (108 mm)
Content of a box 19 sq.ft. (1,765 m2)
Size of a box84'' L x 9'' W x 3'' H(213,3 x 22,8 x 7,6 cm)
Weight of a box (Average) 38 lb (17 kg)
Content of a pallet48 boxes = 912 sq.ft. (84,7 m2)4 boxes/W x 12 boxes/H
Size of a pallet85" L x 45" W x 41" H(215,9 x 114,3 x 104,1 cm)
AVAILABLE ACCESSORIES
• Maintenance Kit • Stair Nosing • "T" Molding• Touch up pens • Reducer • Quarter round• Stain • Threshold • Subfloors
SPECIFICATIONS
THICKNESS: ¾” (19 mm)
WIDTHS: 4 1/4" (108 mm)
LENGTH: Random lengths from 12" (35 cm) to 84" (2.13 m)
CREATING AMBIANCE™
285, De Rotterdam Street, Saint-Augustin-de-Desmaures (Quebec) G3A 2E5, Canada
Telephone: 418 878-8930 | Toll free (Canada & USA): 1 877 667-2725 | Email: [email protected]
PREVERCO.COM
VE
RS
ION
: 1
1/14
SIGMA FINISH (40-10-PRO)35-years warranty for residential application (see full warranty brochure)
COMMERCIAL USE3-year warranty for light commercial applications (see full warranty brochure)
PREOILRefer to the paragraph in the warranty brochure for more details concerning the PreOil finish
Confident that its hardwood floors
WARRANTY
YEAR
E EPR V RCO
TM
