Upload
fadel2100
View
80
Download
0
Tags:
Embed Size (px)
Citation preview
A hospital bed is a bed specially designed for hospitalized
or others in need of patientssome form of health care. These beds have special features both for the comfort and well-being of the patient and for the convenience of health care workers. Common features include adjustable height for the entire bed, the head, and the feet, adjustable side rails, and electronic buttons to operate both the bed and other nearby electronic devices.
Hospital beds and other similar types of beds are used not only in hospitals, but in other health care facilities and settings, such as
assisted living, nursing homes, and outpatient clinicsfacilities,
.home health carein
Electric hospital bed
Size: Twin-size hospital bed measurements: (91.4cm)W x (203.19cm)L (outside overall end-to-end length: (220.97cm))Lift Range: Head - 60˚, Knee - 30˚.Maximum patient weight: 158.7kg .
Bed Height
Casters in Standard Position: Min. 33cm, Max. 59.68cm (at deck level
Motor TypesDC Motors Advantages Easy to understand design Easy to control speed Easy to control torque Simple, cheap drive design
Disadvantages Expensive to produce Can't reliably control at lowest speeds Physically larger High maintenance Dust
DC motorServo motor A servomechanism, or servo is an
automatic device that uses error-sensing feedback to correct the performance of a mechanism. The term correctly applies only to systems where the feedback or error-correction signals help control mechanical position or other parameters. For example, an automotive power window control is not a servomechanism, as there is no automatic feedback which controls position—the operator does this by observation. By contrast the car's cruise control uses closed loop feedback, which classifies it as a servomechanism.
Stepper motors
Stepper motors were and still are often used in computer printers, optical scanners, and digital photocopiers to move the optical scanning element, the print head carriage (of dot matrix and inkjet printers), and the platen. Likewise, many computer plotters (which since the early 1990s have been replaced with large-format inkjet and laser printers)