Case Study CS RS 7315 Louver Integrated in Curtain Wall

Wall Louver Integrated into Curtain Wall

Prepared for Slideshare Dallas by Jon Salis- Construction Specialties Inc - (940) 445-1845 [email protected]

Construction Specialties RS-7315 Louver



Construction Specialties RS-7315 Louver

• AMCA Certified and Tested to 500 L-99 WindDriven Rain

• Continuous Blade Aesthetic

• Mitered and Welded 90 Degree Corners

• Segmented Radius Curved Assembly

• Integrated to Curtain Wall

• Kynar 500 - AAMA 2605 Finish System

• Louvers projected from face of facade



Curtain Wall captures Glazing, Metal Panel and CS Louvers



These photo’s show how the Louver face hasbeen projected out past the face of theCurtain Wall Mullion and the adjacent glazedin Metal Panels.

A unique aesthetic is achieved by the RS-7315 Louvers Field Applied Face Blades thatare actually passing in front of the VerticalCurtain Wall Mullions.



The Construction Specialties RS-7315 Storm Resistant Louver is a 7”Deep Louver. The Rear 4” Storm Resistant Blades perform the WindDriven Rain Performance while the 3” Front Blades provide for acontinuous blade aesthetic. Front Blades are field applied and can be inlengths of up to 20’ before a simple joint.

4” Rear Louver Blade

3” Front Louver Blade



This image shows the 3” Field AppliedLouver blade passing outboard of theintermediate and corner Curtain WallMullions.



This detail show the CS RS-7315 Louverwith a Glazing Frame that allows theLouver to project out from the rest of thebuilding envelope by 2”. A very uniqueAesthetic effect is achieved.

Design

Case Study CS RS 7315 Louver Integrated in Curtain Wall