Best quality lime manufacturer in Rajasthan at low cost price

10 tips you need to know before painting a room

www.gypsonaplaster.com

http://www.gypsonaplaster.com/

• Paint colors will dramatically change the mood and interior design of your home. Painting is one of the easiest and least expensive tools in the interior design world.

• However, there are a few things that you need to know before you paint. These things will make your job much easier.



• But before you paint, you should keep in mind that the use of best quality Gypsum will make your walls stiff and rigid.

• For this, you need to contact some well renowned Gypsum manufacturers who can offer you items at more reasonable rates.



10 tips are mentioned as follows



1. Prepping a Room Does Make a Difference

• If you’re painting your living room, then move large furniture pieces to the center. Cover them up with old sheets or drop cloths.

• You can also use newspapers, drop cloths, or a roll of paper to cover the floor.



2. Test the Paint Color

• It’s very difficult to determine how a particular color will look on your walls, and also with your lighting. If you have a color in mind, then it becomes a good idea to buy a sample.



3. Painting a Room – Allow Color Into Your Life

• You can try a few different colors. This can allow you to create a specific feeling in the room. For example, dark colors add texture and depth to the space.

• This is mainly true if the room is very large with high ceilings.



4. Pay Attention to the Finish You Choose

• To your surprise, the color not only does matter, but the finish, or sheen, does as well. A high gloss paint finish is very durable and easier to clean.

• In most cases, an eggshell finish is the best option. It is still easy to clean, does not highlight imperfections, and not prone to damage as flat paint.



5. Paint Can Be Changed

• You will choose a color after painting a square on the wall and observing it in different light.

• But you may discover that what looked great in a small section is too overwhelming once the walls are finished.



6. Determining How Much Paint You Need

• There are a few things which can help you determine the right amount of paint. First, you should know the square footage of your room.

• Secondly, think about how many coats of paint you want to do. If you’re priming the walls first, one coat is enough, whereas two coats are often needed if walls are not primed.



7. Priming Saves on Paint

• Speaking of priming, this is an important step in the preparation process. Primer seals the walls and provides a base for the paint.

• However primer does not help you skip the step of cleaning the walls. Cleaning the walls is still a very important step.


8. Brush Before Rolling

• Carefully use a high-quality brush to paint the ceiling, corners, and the baseboard. These are areas where a roller can’t reach.

• Use the roller after brushing in order to flatten out any brush marks which have gone further out than the depths of the corner. This can leave you with a smooth flat surface.


9. Prep Your Roller and Paint Brushes

• Rollers are made from fuzzy material. So it’s important that you remove any debris, such as loose fibers from the roller.

• Press your taped hand onto the roller. It will work in a similar manner as a lint roller.


10. Spend Money on Proper Supplies:

• Aside from a good quality paint brush, you need to make sure that you have all the supplies you need prior to getting started. It includes roller extenders and a sturdy step ladder.

• Roller extenders help you reach higher walls without stretching your arms too high or standing on your tiptoes.


Conclusion

These are just a few tips that will make your painting experience much better than you could have expected.

• Prep work is very important• Try samples first• Embrace Color• Primer Is Key• Rollers Save Time


About Author

• Gypsonaplaster is a well renowned gypsum manufacturer in Rajasthan. Our premium quality of Plaster of Paris (P.O.P) is widely used in India.

• Soon we’re going to promote it throughout the world. All our exclusive products are highly accepted by our respected clients in the quality and price cautious market.


Contact Us

Vision Aviation Pvt. Ltd.10th Floor, Office:-1008,

Ansal Bhawan,16, K.G. Marg,New Delhi-110001,India

Email: [email protected]: +91-11-41540776, +91-11-23314230


Thanks


Design

Best quality lime manufacturer in Rajasthan at low cost price