Upload
arkaprava-ghosh
View
405
Download
1
Embed Size (px)
Citation preview
WELDING PROCEDURE SPECIFICATION & WELDER QUALIFICATION PROCEDURE / WELDER PARAMETER RECORD SHEET (APPENDIX – 4)
Document number
PDRP275-8440-PR-2001Report No:-
Contract No: 1-14-4200/4399 Date of Test:-Contract 275/4200 Page Page 1 of 1
`Client : INDIAN OIL CORPORATION LIMITED Consultant /TPIA: FOSTER WHEELER Stamp No. /ID No. - WQT -
WPS No.: -PDRP0275-8440-PR001 Welder’s Name: Position : Base Material: IS 2062 Gr.B Dia : N/A Thickness : 25mm
Max. time between commencement and completion of welds Pre- Heat Temperature: Inter Pass and Initial Cleaning : CHIPPING & BRUSHING Inter Pass Temp. : Type Of Clamp: Polarity : DCEP Method Of Heating : LPG TORCHLocation : STR. FABRICATION SHOP NORTH AREA
Electrode Batch No.:
Type of Welding Set: RECTIFIER
Brand Name: Others – N/A
Weld Process Filler Metal Current inAmps Volts
Travel Speed/ Direction Heat Input
KJ/mm
No. of No. oflayer AWS
ClassBrand Name
Dia in mm
Polarity in mm. Min. of Welding Welders Elect.
ROOTHOT PASS
FILL UP
FINAL
Visual InspectionRoot* : Acceptable / Not Acceptable
Joint Design
QAQC Inspector Inspecting Authority
Sign. : Sign. :Cap* : Acceptable / Not Acceptable Included Angle : N/A
Root Gap : N/A Name : Name :*Strike through whichever is N.A. Root Face : N/A
Date : Date :