Upload
padmadhar-pd
View
51
Download
3
Tags:
Embed Size (px)
DESCRIPTION
Citation preview
1
VENDOR DEVELOPMENT
Presented to :- Presented by :- Asstt. Pro. M. L. Meena Padamdhar garg (2011PME5258)
Vikrant chandrakar(2011PME5263) Umardaraj (2011PMM5266) M. Tech MNIT Jiapur
2
WHAT IS VENDORVendor means a person (or company) who sells and
supplies his (or its) products.
An intelligent purchasing involves the rational selection of sources from which materials can be obtained. Considerable efforts are needed in identifying, developing and evaluating the prospective suppliers. It is also essential to continuously appraise the performance of the current suppliers
3
A few questions are to be answered before attempting to develop vendors
How much quantity is required to be purchased? How much time is available for making such
purchases? Will the material be required repeatedly or
occasionally? What is the volume of purchase of the required
materials? Which is the industry producing the required
materials? What is commercial viability of the materials?
4
Based on the answers, a list of potential supplier is drawn. For the purchase of items that are of repetitive nature, a detailed evaluation procedure of suppliers is adopted. For a one-time purchase, elaborate inquiries and evaluation procedures may not be necessary.
Unless the item is costly and has a high technological content, such as biological products. Effective negotiations can avoid many difficulties in regard to supplies
5
VENDOR DEVELOPMENT INVOLVES FOUR STAGES:-
First Stage survey stage
Second Stage enquiry stage
Third Stage negotiation & selection stage
Fourth Stage experience & evaluation stage
6
Survey stage-source of information on potential vendors
Survey stage-source of information on potential vendors Survey involves collecting information on different suppliers of the desired materials. The following sources may be consulted:
Trade directories: These give information regarding dealers addresses, regional offices, names, types and range of products including spares. Electronic digital interchange, for example :- computer based trade directories, is useful source.
7
Trade journals:- These contain advertisements of the materials related to specific industries, namely chemicals, plastic , steel etc. these journals can be subscribed, relevant information can be classified, indexed, updated and maintained in proper files by the buyer.
Telephone directories :- These contain classified advertisement arranged alphabetically, item-wise or group- wise. Examples are, abrasives, air-conditioners, castings, diamonds and so on. It is an easy and fast means of collecting the sources.
8
Suppliers catalogues :- many manufacturers periodically publish catalogues and pamphlets giving details of the products they manufacture. These catalogues contain considerable technical information, specifications, prices etc.
Salesmen :- they trained person who continuously visit customers for the possible business and orders. Through their sales presentations, it is possible to collect the information and clarify doubts. They help in expanding the knowledge to a great extent.
9
Inquiry stage- selection of potential suppliers :
After a list of possible suppliers is complied, the next step is to inquire a few of them further. It involves a detailed analysis of supplier’s activities furnished by vendors or collected by the company.
Accreditation, FDA approval and certifications namely ISO 9000, 9002 etc, facilitate the selection. A comparison may be made in regard to four aspects of competition
10
Continue…..Technological competition
Service competition
Price competition
Time based competition (TBC) i. e, response time for delivery.
11
Continue….Internal facilities of vendors:- Adequate
facilities are essential for the manufacture and quality control of items.
These must be done under the supervision of qualified and experienced staff. Additional facilities are to be explored for the supply of items in time. Modern equipment, quality of inputs, maintenance, size and capacity, layout , housekeeping and cleanliness are inspected
12
Continue….. • Financial adequacy and stability:- the financial
status of the vendor company and relations with his bankers should be explored, so that items can be produced and supplied without any financial difficulties at any stage. For this purpose, previous years balance sheets of the company are helpful.
13
Continue….Reputation of the vendor: Methods of selling and
distribution network are important. The supplier ‘s reputation in the market in regard to prices and promises of delivery dates should be considered.
Location of the vendor’s factory:- It should be nearer to the buyers factory. If it is located at a very distant town. Vendors representative should be available in the locality. after sales service :- In case of equipment, after sales service is essential. The availability of maintenance engineers in the locality or town should be advantageous
14
Continue…Industrial relations: Industrial conflicts, frequent strikes,
layoffs etc, seriously affect the supplies. The industrial climate, work culture, employer- employee relationship should be given consideration. Hence, one has to very careful in dealing with such companies. In addition, several other factors should be considered.
a) Is the supplier a direct manufacturer or only a agent? b) Is the buyer looking for one or more suppliers? c) Whether the supplier is small or big?
Hence, full enquiry into all factors should be made in order to arrive at a decision regarding the selection of sources.
Thus short listed suppliers are considered for the third stage.
15
Negotiation and selection stage- finalization of vendors:
The vendors who are successful in the enquiry stage may be called for negotiations in order to discuss business possibilities.
During this stage, various terms namely credit, quantity discount, quality specifications etc, can be decided.
Finally, a list of approved vendor’s drawn. Accordingly, purchase orders are placed with the
approved vendors. Several aspects of buying techniques are used at
third stage.
16
Experience and evaluation stage:
At this stage, the buyer evaluates and appraises the performance of the vendor. The objective is to improve the performance of vendors in which they are deficient.
The evaluation is done especially on two counts, namely quality (judged by rejection of lot- size ) and delivery ( judged by delays on delivery).
17
Vendor Rating:
A few ways by which a vendor can be evaluated are listed below:-
1) categorical method 2) weighted point method 3) cost ratio method
18
Categorical method : The buyer prepares a list of factors, which are considered necessary for evaluation.
At periodic intervals, say once in three- months , the buyer prepares a performance report.
19
The format such a report is given :
Factors Grading
1. Supplies as per quantity specified
Always9 8 7
Usually6 5 4
Seldom3 2 1
Never 0
2. Deliveries are as per schedule
3.Rigorous follow up are not necessary
4.Solves his raw material problem on his own5.Willing to accommodate when production schedules are suddenly changed
20
Always9 8 7
Usually6 5 4
Seldom3 2 1
Never 0
6. Helps in emergency7. Behavior is courteous and considerate8. Reasonable in Pricing9. Miscellaneous
Factors Grading
21
.
Each supplier is evaluated and a number-score is calculated.
Then, it is converted into word rating. The
conversion of scores is as follows:Point Remark
80-100 Excellent
70-80 Good
60-70 Average
50-60 Very poor
22
Weighted point method : this type of evaluation involves a point rating based on the quality of goods received, the promptness of deliveries made and the quality of the service rendered by the vendor.
The point may be assigned as follows:-Performance Points
Quantity 50 points
Delivery 30 points
Price 20 points
Total points 100
23
The performance of each factor is separately quantified.
For example, consider the quality aspect, Assume that 160 lots were received during a year and 16 lots were rejected on account of poor quality, the number lots accepted will be 144.
Quality rating = Number of lots accepted× rating points (i.e., 50 Number of lots received
quality rating = 144 × 50 = 45 160 similarly delivery rating can be obtained using below
equation Delivery rating = number of lots delivered in time ×
rating points total number of lots delivered
24
The price rating is calculated using equation Price rating = least offer received × rating
points supplier’s offer
Cost – ratio method : it is an intricate system of determining the actual costs incurred in purchasing, follow up, transportation, packing, duties, receiving etc,
Based on these costs, the unit cost incurred by the buyer is calculated, the higher the cost, the lower the supplier’s comparative rating .
25
For example, costs relating to quality works out to be Rs 2,000 and the total worth of material purchased is Rs 2.0 lacks per year Quality cost ratio = 2,000 : 2,00,000, (i.e., 1%) Similarly, when the cost of delivery is Rs. 1000 then Delivery cost ratio = 1,000 : 2,00,000 (i.e., 0.5%)
Similarly, all types of costs can be calculated. These ratios must be maintained as minimum of possible.
26
.Using the methods mentioned above, a buyer can exercise better judgment over retaining the vendors.
However, many non- quantifiable factors namely
integrity, behavior, attitudes towards progressiveness etc., should also be given importance.
Thus, the buyers experience and judgment would ultimately count.
27
We can understand vendor rating by this example:Ex. The following information is available on 3 vendors:
A, B and C. Using the data below, determine the best source of supply under weighed point method and substantiate your solution.
Vendor A: Delivered 56, lots 3, were rejected 2 were not according to the schedule.
Vendor B: Supplied 38, lots 2 were rejected 3 were late.Vendor C: Finished 42, lots 4were defective 5 were
delayed deliveries.Give 40 for quality and 30 weightage for service.
28
Solution: Quality performance (40% weightage) = (quality accepted/total quantity
supplied)*40Delivery performance:X, Adherence to time schedule(30%)
=(no. of delivery on the scheduled date/total scheduled deliveries)*30
Y, Adherence to quantity schedule(30%)=(no of correct lot size deliveries/tot no of scheduled deliveries)*30
Total Vendor Rating =X+Y
29
Vendor A= (53/56)*40+(54/56)*30 =66.78
Vendor B=(36/38)*40+(35/38)*30 =65.52
Vendor C =(38/42)*40 +(37/42)*30 =62.62
So Vendor A is selected with best rating.
30
BUYING TECHNIQUES : Purchasing involves procurement of materials, machinery an services needed for production and maintenance.
The purchasing department procures the right kind of material (quality ) , in right – quantities, at right time and makes them available for the production.
It also concentrates on the right source and economic procurement, while procuring the materials, the company pays the price.
31
Price is defined as the amount of money at which a thing is valued or the value that a seller sets on his goods in the market.
Price is a greatest variable in purchasing. Very often price is qualified by terms, best price, lowest price, economic price etc,
In order to determine the right price, the buyer should be conversant with business trends, trade cycles, supply and demand, price advances and declines, quantity discounts .
32
Quotations:Quotation is an inquiry to know whether the
vendor can supply the desired material and if so, by what price.
Quotation are invited on a prescribed form or format from the selected sources for the required items.
The quotation also includes the terms and conditions namely taxes, freight, cartage etc.
33
At the top of this form, the words ‘THIS IS NOT AN ORDER’ is printed
A minimum of three quotations each in duplicate is required from different suppliers.
The quotations are valid for at least one month
from date of opening.
Quotation is not a purchase order
34
Generally materials are bought by one of the following techniques:-
Spot quotations :-The buyer can go to the market and collect minimum of three quotations from three different suppliers and takes spot decision.
This type of practice is not possible in the purchase of pharmaceutical materials.
35
This method is suitable for the purchasing of office stationery and computer peripheries.
The purchasing department selects the suppliers form the approval list and accordingly does the purchasing.
36
Floating a limited enquire :- This method is used when the value of purchases is small. The company sends letters to a few reliable vendors requesting for prices, analytical reports, and other details for a particular material.
A purchase enquiry form is usually prepared for this purpose.
The quotations are collected in duplicate at least from
three suppliers.
After getting quotations, these are opened and a comparative statement is made.
37
It is analyzed in the light of following points:-
1. Price of the material - Material specifications (quality)
2. Place of delivery - Delivery period – 3. Taxes - Terms of payment – 4. Validity of tender - Guarantee period etc.
The comparative statement helps in studying and comparing different quotations at a glance.
Thus a quick decision can be taken as with whom to place order for the purchase of a material.
38
Tenders :-
A tender is a written letter or a published document ( in news papers) that is aimed at finding the price for procuring certain materials or for getting a particular job done within the desired period and under specified conditions.
Tenders are invited from recognized or registered firms. A few types of tenders are given below;-
- single tender - open tender - closed tender or limited tender
39
.Single tender : Single tender is invited from one reliable supplier, under certain conditions.
It is applicable to proprietary items, high quality items and also C- items such as clips, pins, pencils etc., when items are required urgently.
40
Open tender : Open tender method is used when the value of purchases is high. When supply sources are not known or intended to locate more supply sources, open tender ( or public tender ) is used. Open tenders are very expensive.
The buyer is not aware of the capability of the supplier.
Therefore, tenders are invited from recognized or registered firms.
Open tender is also called press tender, because it is published in the news papers, trade journals etc
41
Negotiations :-
• Negotiations may be defined as an art of arriving at a common understanding through bargaining on the essentials of contract such as delivery, specifications, prices and terms.
Negotiations with the concerned vendor(s) are often necessary before finalizing a purchase contract. The purpose is for fixing and finalizing prices of materials, terms and conditions.
42
Need for negotiations :-
In most cases, purchase orders are decided on the basis of quotations. Negotiations are required when a change in the scope of a contract is warranted. Negotiations are considered essential in the following conditions:
- prices are related to large volumes or to a large value.
- terms and conditions are required for large volumes.
- contract is desired for a longer period.
43
Continue….
Variations in quantity to be purchased are possible.
Changes in drawing and specifications are necessary.
Changes in transportation, packing and delivery points are to be decided.
When no acceptable quotations are received from the responding vendors.
44
Process of negotiations : negotiations take place between two individuals or two sets of individuals.
Communication is an important ingredient in the art of negotiation.
Through the communication of ideas, the purchasing department persuades and convinces the vendors to agree with their view point,
So that an agreement can be reached. Negotiations
should attempt at a ‘win-win, situation to both parties. It is mutually satisfactory settlement.
45
Discounts :- Discounts are defined as the cash concessions
offered by the vendor in the payment price, on the goods purchased, in order to enhance the volume of business opportunities.
Reasons for offering discounts :- when large orders are placed, the seller is able to obtain economies in production, packaging, billing, selling etc.,
46
When the bills are cleared immediately after delivery, the supplier gets finance for his activities.
Similarly transportations costs and other costs provide economics.
The supplier is prepared to give a part of his savings to the buyer.
Thus discounts are usually offered by a majority of suppliers.
47
Types of discounts : Materials may be purchased in three
ways.
1. Volume contract 2. Deals 3. Discounts
.
48
Continue……Volume contract : this type of contract is employed to cover
total purchase of ampoules, bottles and other accessories.
Because of a large order, the seller is able to obtain economies in production, packaging, billing, selling etc
Volume contract discount may be defined as a method of offering discount proportionate to the quantity of goods or volume of material ordered.
In this system, the manufacturer (buyer) estimates its annual consumption of a class of products and signs an agreement with the supplier
49
Continue…Such contracts are executed for a period of one year. The advantage of this type of purchase is that
contract price is usually protected from an increase (or decrease) of prices.
In some cases, the buyer directly pays to the supplier.
In case of government purchases, payment is made through Director general of supplies and disposals (DG, S & D ) Cash discount : The normal credit period is 90 days for the payment of bill.
50
Continue….Cash discount is a method of offering discounts depending
on the time of payment made on the delivery.
Cumulative discounts: in this case, quantity might not be fixed in the contract.
Cumulative discounts may be defined as a method of offering proportionate discount on the basis of actual purchases and appropriate to the quantity range in an year.
For example, buying is continued during the course of the
year, but the price will be reduced beyond a certain volume.
51
Consignment terms : This is frequently used in retailing
In consignment terms, the buyer ( usually a trader ) pays the price after selling the goods.
A pharmaceutical company may agree or consignment terms of payment with a chemist’s shop
52
Flow Chart of vendor development process
53
54
55
56
57
58
59
60
61
THANK YOU