8
Melbourne: Unit 2/9 Production Drive, CAMPBELLFIELD, Vic, 3061. Phone: (03) 9357 7470 — Fax: (03) 9357 7450 Agents: WA, NSW, SA, TAS, QLD Email: [email protected]Web: www.ultrahawke.com.au AUSTRALIA’S LARGEST WEIGHBRIDGE MANUFACTURER! Ultrahawke Pty Ltd ABN 97 004 659 358 Henry Binney Hawke arrived in Adelaide on the ship “William Money” on January 3 rd , 1849 at the age of 21, and took a job at a foundry in North Terrace. H.B. Hawke & Company began business in Kapunda, South Australia in 1857 making castings for the nearby Copper Mines and, by 1867, the company was manufacturing and installing weighbridges. In 1884 Hawke sold out to William Thomas and Rees Rees. By 1890 H.B. Hawke & Company employed over 90 people including pattern makers, moulders, fettlers, fitters, turners, apprentices and clerks. In 1912 Sir Sidney Kidman took an interest in the business investing some operating capital. In 1926 Kidman purchased all the company’s assets and liabilities. Horatio Rees, a son of Rees Rees, was enticed back to the business from Castlemaine in Victoria. Horatio promised Kidman that he would revitalise the company, which had slumped some what, and within five years was so successful that he repurchased the business from Sir Sidney. At the age of 37, he became the sole proprietor. In 1931 Hawke & Company produced the first Australian designed hydraulic car hoist, which was an instant success. The company continued to manufacture weighbridges, along with hydraulic presses, road rollers, kerbing machinery, and general engineering and repair work. In 1945, Hawke & Company became Hawke & Company Pty Ltd. In 1957, Horatio Rees died and his daughter Enid, who had been the company secretary since 1937, became Managing Director. In the late 1960s, Ultra Scales Pty Ltd, owned and operated by Eric Brabham, became the representative for Hawke & Company weighbridges on the east coast of Australia. By the mid 1970’s, Ultra Scales Pty Ltd were selling, installing, and servicing many Hawke and Company Pty Ltd weighbridges in eastern Australia, with Eric Brabham having an influence on new designs and manufacturing techniques. During this time, Eric was able to purchase a minor shareholding in the weighbridge side of the business. In 1983, when, due to recession, the Hawke & Company Pty Ltd closed in Kapunda, Eric Brabham purchased the remaining major holding in the weighbridge business and moved manufacturing to Melbourne. Eric Brabham was an innovator in the Weighing Industry, and introduced much forward thinking to a product that hadn’t changed in basic design for nearly 100 years. He was quick to introduce loadcell technology in to weighbridges, and he would always be open to build in the latest technology. When Eric decided to retire in 2000, he passed the company on to the current owners, a company that was an Industry Leader in the field, a position it still holds today. A BRIEF HISTORY OF ULTRAHAWKE WEIGHBRIDGES

Ultrahawke Weighbridge Product Range

Embed Size (px)

Citation preview

Page 1: Ultrahawke Weighbridge Product Range

Melbourne: Unit 2/9 Production Drive, CAMPBELLFIELD, Vic, 3061.Phone: (03) 9357 7470 — Fax: (03) 9357 7450Agents: WA, NSW, SA, TAS, QLDEmail: [email protected] — Web: www.ultrahawke.com.au

AUSTRALIA’S LARGESTWEIGHBRIDGE MANUFACTURER!

Ultrahawke Pty LtdABN 97 004 659 358

Henry Binney Hawke arrived in Adelaide on the ship “William Money” on January 3rd, 1849 at the age of 21, and took a job at a foundry in North Terrace. H.B. Hawke & Company began business in Kapunda, South Australia in 1857 making castings for the nearby Copper Mines and, by 1867, the company was manufacturing and installing weighbridges. In 1884 Hawke sold out to William Thomas and Rees Rees.

By 1890 H.B. Hawke & Company employed over 90 people including pattern makers, moulders, fettlers, fitters, turners, apprentices and clerks. In 1912 Sir Sidney Kidman took an interest in the business investing some operating capital. In 1926 Kidman purchased all the company’s assets and liabilities.

Horatio Rees, a son of Rees Rees, was enticed back to the business from Castlemaine in Victoria. Horatio promised Kidman that he would revitalise the company, which had slumped some what, and within five years was so successful that he repurchased the business from Sir Sidney. At the age of 37, he became the sole proprietor.

In 1931 Hawke & Company produced the first Australian designed hydraulic car hoist, which was an instant success. The company continued to manufacture weighbridges, along with hydraulic presses, road rollers, kerbing machinery, and general engineering and repair work.

In 1945, Hawke & Company became Hawke & Company Pty Ltd. In 1957, Horatio Rees died and his daughter Enid, who had been the company secretary since 1937, became Managing Director.

In the late 1960s, Ultra Scales Pty Ltd, owned and operated by Eric Brabham, became the representative for Hawke & Company weighbridges on the east coast of Australia. By the mid 1970’s, Ultra Scales Pty Ltd were selling, installing, and servicing many Hawke and Company Pty Ltd weighbridges in eastern Australia, with Eric Brabham having an influence on new designs and manufacturing techniques.

During this time, Eric was able to purchase a minor shareholding in the weighbridge side of the business. In 1983, when, due to recession, the Hawke & Company Pty Ltd closed in Kapunda, Eric Brabham purchased the remaining major holding in the weighbridge business and moved manufacturing to Melbourne.

Eric Brabham was an innovator in the Weighing Industry, and introduced much forward thinking to a product that hadn’t changed in basic design for nearly 100 years. He was quick to introduce loadcell technology in to weighbridges, and he would always be open to build in the latest technology.

When Eric decided to retire in 2000, he passed the company on to the current owners, a company that was an Industry Leader in the field, a position it still holds today.

A BRIEF HISTORY OF ULTRAHAWKE WEIGHBRIDGES

Page 2: Ultrahawke Weighbridge Product Range

Melbourne: Unit 2/9 Production Drive, CAMPBELLFIELD, Vic, 3061.Phone: (03) 9357 7470 — Fax: (03) 9357 7450Agents: WA, NSW, SA, TAS, QLDEmail: [email protected] — Web: www.ultrahawke.com.au

Manufacturers of:

Weighbridges (Digital and Analogue)

Axle Weighers Cattle Scales Container Weighers Chlorine Scales Platform Scales In-Motion Weighers Steel Deck Relocatables Driver Control Stations

Suppliers of:

Load Cells and Systems Hire Equipment Digital Weigh Indicators Batching Systems Remote Displays Handheld Data Capture

Systems

Design:

Software Automatic Weighing Customised Weighbridges

and Weighing Systems Driver Control Stations

Service:

Laboratory Scales Scales Weighbridges Platform Scales Axle Weighbridges In-Motion Systems Overhead Track Scales

LEADING SUPPLIERS OF WEIGHING TECHNOLOGY FOR OVER 150 YEARS

ZERO TARE RECIPE

K411

R423

1 2 3

$/\

Clock

1 ABC

View

2 DEF

Report

3 CGHI

Total

4 JKL

ID

5 MNO

Timer

6Add

PQRS

Target

7 TUV

Flight

8WXYZ

Tol

9Del

Alibi

+/-Acc

0 .

Lock

.Edit

OKTOT

NEW FULLY DIGITAL WEIGHBRIDGE NOW

AVAILABLE

Page 3: Ultrahawke Weighbridge Product Range

Melbourne: Unit 2/9 Production Drive, CAMPBELLFIELD, Vic, 3061.Phone: (03) 9357 7470 — Fax: (03) 9357 7450Agents: WA, NSW, SA, TAS, QLDEmail: [email protected] — Web: www.ultrahawke.com.au

Weighbridges

Digital and Analogue Road, Road-Rail, and Off-Road Unique Remotely Operated

Public Weighbridges 4m to 54m or Custom Design Above Ground, In-Ground 10t to 300t Capacity Stainless Steel Load Cells Low Profile Trade Measurement Approved Customised Software Unattended Operation Split Deck, Multiple Deck Heavy Capacity Load Cells Hermetically Sealed In-Built Lightning Protection Manufactured by UltraHawke

Axle Weighers

In-Ground Design 4m x 3m or Customised 30t Capacity Easy Installation Trade and Non-Trade Totalisation and Printing of Axle Groups Stainless Steel Load Cells Manufactured by UltraHawke

In-Motion Axle Weighers

Easy Installation Low Profile Heavy-Duty Design Trade and Non-Trade Stainless Steel Load Cells Axle Totalisation and Printing In-Ground Design Weighs the Vehicle In Motion

Steel Deck Relocatables

Full Steel Construction 6m Modular Sections Stainless Steel Load Cells Lightweight for Transport Trade-ApprovedIn-Ground or Above-Ground

WEIGHBRIDGES • AXLE WEIGHERS • IN-MOTION WEIGHERS • RELOCATABLES

NEW FULLY DIGITAL WEIGHBRIDGE NOW

AVAILABLE

Page 4: Ultrahawke Weighbridge Product Range

Melbourne: Unit 2/9 Production Drive, CAMPBELLFIELD, Vic, 3061.Phone: (03) 9357 7470 — Fax: (03) 9357 7450Agents: WA, NSW, SA, TAS, QLDEmail: [email protected] — Web: www.ultrahawke.com.au

UltraHawke has developed total solution scale software for Batching, Bulk Loading, Check Weighs, Filling or Receiving and Despatching Products that improves effi-

ciency, provides real time information and increases profitability.

Developed In-House Modular for Expandability User Friendly Operation Windows-Based Application Password Protection

Extensive Reporting for Inventory, Batch, Vehicle Control Compatible with all Electronic Weighbridge Indicators Quick Recall of Vehicle, Customer, Product, Details and Entry Multiple Weighbridge Configuration

Advantages:

Standard Packages Available for Refuse, Quarry, Warehousing, Batching, Bulk Loading Vehicle TAG or Proximity Card Options Available for Unattended Weighbridge Operation Operates on the Latest Windows Operating System Easily Linked to Use a Word processing, Spreadsheet or Accounting Software Compatible with all Electronic Weighbridge Indicators

LEADING OFF-THE-SHELF AND CUSTOMISED SOFTWARE SOLUTIONS

Page 5: Ultrahawke Weighbridge Product Range

Melbourne: Unit 2/9 Production Drive, CAMPBELLFIELD, Vic, 3061.Phone: (03) 9357 7470 — Fax: (03) 9357 7450Agents: WA, NSW, SA, TAS, QLDEmail: [email protected] — Web: www.ultrahawke.com.au

Databases Vehicles – with default product, customer, job/order details – fast operation Products – with customer/order specific prices, GST/levy/surcharge Customers – full accounting details, address, fax, ABN, volume, price Operators –specific access restrictions

Cash/Account Sales All cash, account, EFTPOS, cheque transactions are posted to the current operator shift account for cash balancing Reconciliation printout to balance till at end of shift/day Cheque listing printout for attachment to bank deposit forms Invoices can be issued for any given period

Historical Records Full search by any database field View of records in spreadsheet form or as individual records View of the selected weighing ticket on screen Reprint of past dockets available (titled “Duplicate Copy”)

Stock Control Automatic stock update, product in/out transfer Add/remove stock items Change stock item value Stock pile adjustments

Transfer of Information Can export to most accounting packages Can export to Microsoft® Excel, Word, etc. Reports can be emailed

Security Password protected Administrator can restrict operator level of access

Issue of Tickets Can be formatted to suit individual customer’s need Selectable ticket number range, separate sequence for in/out if required Tickets can be of variable length to allow for additional information Hot keys available to reduce number of key strokes, one key transaction for non-weigh items

Vehicle File Tare register can be programmed to alert update required Multiple tares available to allow for different configurations of prime mover and various trailers Fast find vehicle look up to facilitate faster processing

Reporting Full reporting available for any fields in database EPA reports Runners report to record those that have avoided weighing out

Support Program changes and problem solving via modem and PC Anywhere software for fast results

Manned or Unmanned Driver Control Stations

Easy to Use Programs Driver Prompting Full Range of Reports Controls Traffic Lights, Boom Gates,

etc. iButton Tag Operation Stainless Steel Enclosure Fully Weighbridge Integrated

LEADING OFF-THE-SHELF AND CUSTOMISED SOFTWARE SOLUTIONS

Page 6: Ultrahawke Weighbridge Product Range

Melbourne: Unit 2/9 Production Drive, CAMPBELLFIELD, Vic, 3061.Phone: (03) 9357 7470 — Fax: (03) 9357 7450Agents: WA, NSW, SA, TAS, QLDEmail: [email protected] — Web: www.ultrahawke.com.au

Flintec RC3 Digital and Analogue Weighbridge Load Cells, 30t, 40t and 50t Capacities

Our Flintec Stainless Steel Load Cells are designed for Australia’s rugged conditions and manufactured to the highest standards and protected against the ingress of water to IP68.

Civil Works Designed to Australian Standards

All our Civil Works are carried out by professional building contractors, ensuring our customers’ projects are completed on time and fuss free. Alternatively, the civil works can be carried out by your own Civil Works contractors.

Dependable and Reliable Installation and After-Sales Service

Factory trained service personnel carry out the installation quickly and efficiently, leaving you with a quality product that will exceed your expectations.

LEADING SUPPLIERS OF WEIGHING TECHNOLOGY FOR OVER 150 YEARS

Lightning Protection Included

Page 7: Ultrahawke Weighbridge Product Range

Melbourne: Unit 2/9 Production Drive, CAMPBELLFIELD, Vic, 3061.Phone: (03) 9357 7470 — Fax: (03) 9357 7450Agents: WA, NSW, SA, TAS, QLDEmail: [email protected] — Web: www.ultrahawke.com.au

Load Cell Systems

Capacities to 400t Compression and Shear Beam

Design Mounting Systems with Lift-Off

Protection PLC or Computer Compatible Trade-Approved Models Available

Chlorine & Gas Cylinder Scales

Suits 1t Drums and 150kg Cylinders Multiple Drum Operation PLC Compatible Manufactured by UltraHawke Stainless Steel Load Cell

Remote Displays

Display Sizes Ranging from 12mm to 150mm Display Types including Electromechanical, LED and LCD Connection to a Wide Variety of Digital Indicators Easy Installation, Even to Existing Weighbridge Sites Completely Trade-Approved

Handheld Data Capture Systems

Latest Technologies Ideal for Capturing, Computing and Communicating Data Faster and Easier

Full Connectivity (WLAN, WWAN and WPAN) Ideal for Any Mobile Professional’s Data Capture Application A Complete Solution Thanks to a Wide Range of Accessories

Service and Support

24 Hour Call-out Regular Maintenance Factory Trained Service Technicians Heavy Capacity Weighbridge Test Truck Full Range of Spare Parts Electronic and Mechanical Scale Service Contract Service

LEADING SUPPLIERS OF WEIGHING TECHNOLOGY FOR OVER 150 YEARS

Page 8: Ultrahawke Weighbridge Product Range

Melbourne: Unit 2/9 Production Drive, CAMPBELLFIELD, Vic, 3061.Phone: (03) 9357 7470 — Fax: (03) 9357 7450Agents: WA, NSW, SA, TAS, QLDEmail: [email protected] — Web: www.ultrahawke.com.au

QuestionWhat do these companies have in common?

Answer

They commission ultrahawke to install and service their weighing needs.

BORAL BoralHIGH ANALYSIS FERTILIZERS

Australia’s Growing Edge

SHIRE OF DUNDAS