G-392_94963.qxp 9/25/09 9:12 AM Page 1

2 TRUCK & FLEET PRODUCTS

AMSOIL synthetic diesel motor oilshelp decrease downtime andincrease profits with better protec-tion and less expense.

Wear Control AMSOIL synthetic diesel motor oilshave been proven to keep wearrates lower than conventional oils.Synthetic base stocks are tailored toreduce friction more effectively thanconventional base stocks, whichlowers wear rates and helps keepengine heat from climbing exces-sively. Outstanding-quality anti-wearadditives protect surfaces from wearin conditions that prevent a full lubri-cating film from developing.

Acid Neutralization andSoot Control AMSOIL synthetic diesel motor oilsare proven to neutralize acids andcontrol corrosion for longer periodsthan conventional oils. The top-quality detergents responsible forlong-term acid neutralization alsoinhibit deposit formation on hot enginesurfaces. The highly-effective disper-sants in AMSOIL synthetic diesel motoroils control soot and other contami-nants, providing long-lasting protectionagainst wear and sludge formation.

Low-Temperature Fluidity AMSOIL synthetic diesel motor oilsremain fluid in low temperatures. Low-temperature fluidity helps enginesstart in cold temperatures and ensuresrapid cold-temperature post-startupprotection.

Chemical and Physical Stability AMSOIL synthetic diesel motor oilsoffer superior thermal, oxidative andshear stability. Thermal stability allows

them to work in high temperatureswithout undergoing molecular break-down and consequently increasingoil consumption and starting the for-mation of sludge. Oxidative stabilityallows them to work in high temper-atures without undergoing chemicalchanges leading to oil thickening,loss of lubricating ability, and sludgeand acid formation. Shear stabilitykeeps them from falling out ofviscosity grade and losing their abilityto protect against metal-to-metalcontact and wear in engine operatingtemperatures as a result of shearforces.

Fuel Economy AMSOIL synthetic diesel motor oilshave a low coefficient of friction thatimproves fuel economy by reducingthe loss of power to friction. In fact,AMSOIL synthetic diesel motor oilscan increase fuel efficiency up tothree percent.

Premium API CJ-4 SyntheticDiesel OilsAMSOIL Synthetic 5W-40 (DEO) and15W-40 (DME) Diesel Oils are thepremium choice for API CJ-4 emis-sion-quality diesel oil required bymodel-year 2007 and newerdiesel engines. They deliverextraordinary lubrication indiesel engines found in com-mercial, fleet and personalvehicles. AMSOIL PremiumCJ-4 Diesel Oils exceedemission system require-ments and are compati-ble with all exhausttreatment devices. Theycontrol soot-thickeningand wear, maximize fueleconomy and reduce oilconsumption.

Series 3000 Synthetic 5W-30Heavy Duty Diesel OilAMSOIL Series 3000Synthetic 5W-30 HeavyDuty Diesel Oil (HDD),formulated for dieseland gasoline engineuse, offers a com-bination of engineprotection and fueleconomy unmatchedby other oils. Inde-pendent lab testsshow Series 3000outprotects otherpopular diesel oils –even 15W-40 oils –by a wide margin.

It’s a Proven Long-Drain Oil. An ongoing class 8 fleet demon-stration shows Series 3000 usedcontinuously for 80,000 milesoffers better TBN and viscosityretention, soot control and wearprevention than does a popular conventional 15W-40 oil changedat 20,000-mile intervals.

Diesel Motor OilsSynthetic SAE 5W-30, 5W-40, 15W-40 and 30 and Synthetic Blend 15W-40 API CJ-4, CI-4, CI-4 Plus, CF, CF-2, SL, Mack EO-O Premium Plus ‘03, Cat ECF-1, DDC Powerguard 93K214, as labeled

DEO

HDD

DME

G-392_94963.qxp 9/25/09 9:12 AM Page 2

TRUCK & FLEET PRODUCTS 3ACD

PCO

AME

Synthetic 15W-40 HeavyDuty Diesel and Marine OilAMSOIL Synthetic 15W-40Heavy Duty Diesel and MarineOil (AME) has been provensuperior to conventional oils infleet demonstrations andcountless miles of over-the-road use. AMSOIL Synthetic15W-40 Heavy Duty Dieseland Marine Oil reduces wearrates, provides extended drainservice and saves truckers sig-nificant money.

15W-40 Synthetic Blend Gasoline & Diesel Motor OilAMSOIL Synthetic Blend Heavy DutyMotor Oil (PCO) offers the advan-tages of a synthetic at a more afford-able price. AMSOIL Synthetic BlendHeavy Duty Motor Oil provides high- and low-temperature protec-tion, thermal and oxidative stabilityand retention of TBN, dispersencyand viscosity in gasoline and dieselapplications.

Synthetic 10W-30/SAE 30 Diesel Motor OilAMSOIL Synthetic 10W-30/ SAE 30 Diesel MotorOil (ACD) offers high- and low-temperature service and protection. Its low-temperature fluidity is superior to that of conventional 15W-40 motoroils. Its shear stability, low volatility and high-temperature film strength make it ideal for high-stress applications.

G-392_94963.qxp 9/25/09 9:12 AM Page 3

4 TRUCK & FLEET PRODUCTS

Donaldson® Endurance™

Donaldson Endurance air and oil filters provide the highest level of fil-tration efficiency in the heavy-duty industry. Specifically designed for on-road, heavy-duty class 6, 7 and 8 vehicles, Donaldson Endurance airand oil filters feature revolutionary nanofiber technology.

Endurance air filters offer longer engine life, longer filter life, initial effi-ciency up to 99.99 percent and five times more capacity than con-ventional cellulose filters.

Endurance air filters come with a “twice the miles” guarantee to delivertwice the miles between change intervals over cellulose air filters for on-highway applications, or customers receive a new filter at no charge.

Donaldson Endurance oil filters are made with advanced synthetictechnology that results in fibers that have a controlled size, down to sub-micron diameters.

This controlled process allows Endurance oil filters to deliver bothhigher dirt-holding capacity at the same pressure differential and higherefficiency compared to conventional cellulose filters. The syntheticmedia also has better durability and increased resistance to water.

Donaldson P-SeriesAMSOIL also offers filtration products from Donaldson’s P-Series line.With many applications that differ from, and several that coincide withthe Endurance line, Donaldson P-Series filters offer premium filtrationat a competitive price.

Donaldson Filtration ProductsNanofiber technology and rugged construction provide exceptional performance and extended service life.

OIL FILTERSDonaldson P-Series oil filters feature housing constructed with heavygauge steel and domed construction, providing superior pressurefatigue performance. Donaldson P-Series oil filters are constructedwith either full-synthetic media or synthetic blends for high efficiency.The center tube allows more flow without compromising strength, andthe louvered design helps eliminate tearing during pleat movement.

HYDRAULIC FILTERS

AMSOIL offers a full line of hydraulic filters from Donaldson.Donaldson P-Series hydraulic filters provide superior protection forhundreds of machinery and component applications, both in the fac-tory and on heavy-duty equipment.

FUEL FILTERS

Donaldson fuel filters provide clean, filtered fuel to helpprevent pump wear, injector clogging, and prematureengine wear and can boost fuel efficiency. AMSOIL offersa complete line of spin-on and cartridge-style Donaldsonfuel filters. Donaldson filter media features a multiple-lay-ered design specifically made to remove water and conta-minants from the fuel stream.

COOLANT FILTERS

Donaldson P-Series coolant filters remove contaminantsfrom the cooling system, minimize the risk of filter plug-ging and keep engines running efficiently.

G-392_94963.qxp 9/25/09 9:12 AM Page 4

TRUCK & FLEET PRODUCTS 5

AMSOIL Heavy-Duty and DUAL-GARD By-Pass Oil Filtration Systems(BMK30, BMK22) treat oil to ultrafine filtration, which increasesengine and oil life and enhances engine performance.

AMSOIL Ea By-Pass Filter elements remove submicron-sizedparticles, keeping oil analytically clean. Clean oil lubricates and coolsefficiently because its coefficient of friction is low. It promotes supe-rior piston ring seal, which improves compression and engine power,and reduces blow-by, oil consumption and fuel dilution. Oil lastslongest when clean, since its additives are not consumed by cont-aminant control.

The DUAL-GARD system allows the installation of two AMSOIL EaBy-Pass Oil Filters, doubling the by-pass filter change intervals. Thesystem also makes room for a larger volume of lubricating oil, allowingthe oil to run cooler and rest more. Both increase oil durability.

Heavy-Duty By-Pass Oil Filtration Systems

Synthetic PowershiftTransmission FluidsSynthetic SAE 10W, 30, 50AMSOIL Synthetic SAE 50 Powershift Transmission Fluid exceeds Rockwell/Eaton/FullerCD-50 performance specifications and is ideal for use in Fuller, Rockwell, Spicer, Fabco,Warner and other large truck manual transmissions.Superior Wear ProtectionAMSOIL Synthetic Powershift Transmission Fluids (CTG, CTJ, CTL) areformulated for superior wear protection, without viscosity index improvers.They maintain grade throughout service life, providing long-term protectionagainst equipment wear, even when equipment is frequently subjected tosustained periods of applied pressure or high horsepower and high torque.

High- and Low-Temperature PerformanceAMSOIL Synthetic Powershift Transmission Fluids provide superior protectionin high temperatures. They inhibit the formation of varnish, deposits andsludge, while their excellent heat transferring abilities help hot-runningequipment operate up to 50°F cooler. In low temperatures, AMSOIL Syn-thetic Powershift Transmission Fluids flow readily for dependable startup andpost-startup protection.

Extended DrainsAMSOIL Synthetic Powershift Transmission Fluids provide two to five timesthe service life of conventional petroleum fluids if kept free of dirt andmoisture. They may be used in manual transmissions for 250,000 miles orfive years, whichever comes first.

CTL

G-392_94963.qxp 9/25/09 9:12 AM Page 5

AMSOIL synthetic gear lubes keep differentials and EPgear lube-equipped transmissions running clean, pro-tected and at top efficiency.

Load-Bearing and Extreme-Pressure ProtectionAMSOIL synthetic gear lubes are formulated to protectgears operating in heavily-loaded conditions, whetheror not the gears operate with full-film lubrication. Supe-rior film strength and viscosity retention offer superiorprotection in full-film regimes, while top-quality extreme-pressure agents protect when a full lubricating filmdoes not separate gear surfaces.

The thermal durability of AMSOIL synthetic gearlubes ensures extreme-pressure protection afterextended exposure to extreme temperatures. Theextreme-pressure agents in conventional gear lubessometimes lose their effectiveness after extendedexposure to high temperatures, leaving gears vulner-able to metal-to-metal contact and wear.

Friction ReductionAMSOIL synthetic gear lubes effectively reduce friction,power loss and temperatures through the use of high-quality synthetic oils and an extra treatment of extreme-pressure additives. Reduced axle friction is associatedwith reduced fuel consumption and can provide sig-nificant annual savings.

High- and Low-Temperature PerformanceAMSOIL synthetic gear lubes maintain their viscositybetter with changes in temperature than conventionallubes, which allows them to protect over a broadertemperature range.

They maintain better low-temperature fluidity thanconventional gear lubes, while also protecting better inhigher temperatures.

Extended DrainsIn commercial long-haul trucks, AMSOILFGR and FGO gear lubes may beused up to 500,000 miles. In cars,SUVs and light-duty trucks AMSOILgear lubes greatly exceed originalequipment manufacturer’s petro-leum gear lube drain intervals andmay be used up to 50,000 miles insevere service or 100,000 miles innormal service, or according to theowner’s manual, whichever is longer.

Additional BenefitsAMSOIL synthetic gear lubes provide limited-slip capa-bility, and may be used in limited-slip differentials with-out special additives.

AMSOIL synthetic gear lubes also provide out-standing protection against rust, which is important forstored equipment.

Severe Gear ®

Synthetic EP Gear LubesAMSOIL Severe Gear Gear Lubes (SVG,SVT, SVO) are specifically engineeredfor high-demand applications, includ-ing trailer towing, heavy hauling, 4X4off-road driving, commercial use andracing. Their superior lube filmstrength combined with extra addi-tives protects gears and bearingsfrom scoring and wear. Severe GearGear Lubes resist high heat and pos-sess excellent cold-flow properties.They are engineered to outperformall conventional gear oils and arecompatible with most limited-slip differentials.

Synthetic Gear LubesAPI GL-5, MT-1, SAE 75W-90, 80W-90, 75W-140, 75W-110, 80W-140

AMSOIL Synthetic 5th Wheel and Open GearCompound (GFW) provides outstanding trucktractor fifth-wheel lubrication and protection.

AMSOIL Synthetic 5th Wheel and OpenGear Compound adheres to metal surfacesthat are dirty or otherwise poorly prepared forlubrication, making it ideal for hard-to-serviceequipment operating in hostile environments.

AMSOIL Synthetic 5th Wheel and OpenGear Compound resists water washout, pro-tecting fifth-wheels that are exposed to water.

Its top-quality anti-rust and anti-corrosionagents protect surfaces from the rust and cor-rosion water exposure may cause.

AMSOIL Synthetic 5th Wheel and OpenGear Compound offers superior protectionin high and low temperatures. It is designed notto flake in low temperatures or soften in high temperatures.

AMSOIL Synthetic 5th Wheel and OpenGear Compound sprays on easily. It’s quick,neat and economical to use.

5th Wheel and Open Gear CompoundAGMA 14R, NLGI No. 1

6 TRUCK & FLEET PRODUCTS

FGR

SVG

GFW

G-392_94963.qxp 9/25/09 9:12 AM Page 6

AMSOIL synthetic extreme-pressure lithium-complexgreases offer outstanding protection and extendedservice lives.

Load-Bearing and Extreme-PressureProtectionAMSOIL synthetic extreme-pressure lithium-complexgreases offer outstanding protection in high-load andextreme-pressure operations. The great film strengthof synthetic base stocks, mechanical stability of lithium-complex thickeners and the protective shield providedby extreme-pressure agents make AMSOIL greases topof the line.

Friction ReductionAMSOIL synthetic extreme-pressure lithium-complexgreases have a low coefficient of friction that helps keepwear rates low and efficiency high by minimizing friction.

High- and Low-Temperature PerformanceOutstanding thermal and oxidative stability allowAMSOIL synthetic greases to protect in highertemperatures than conventional greases withoutbreaking down or forming deposits. Outstandingcold-temperature pumpability allows them to protectin lower temperatures than conventional greases.

Additional BenefitsExcellent washout resistance and corrosion inhibitionoffer outstanding protection in wet applications or forstored equipment.

Synthetic GreasesNLGI No. 2, GC-LB

Series 2000 Synthetic Racing GreaseAMSOIL Series 2000 SyntheticRacing Grease (GRG) is for-mulated for high-speed/high-temperature and low-speedhigh-load applications. It pro-vides the load-bearing capac-ity of a heavy-duty grease andthe high-temperature protec-tion of a multi-purpose grease.

Synthetic Heavy DutyGreasesAMSOIL Synthetic Heavy DutyGreases (GHD) are moly-forti-fied greases formulated forlow-speed high-load applica-tions. They provide depend-able performance in extreme-pressure conditions.

Synthetic Multi-Purpose GreasesAMSOIL Synthetic Multi-Purpose Greases (GLC) areformulated for high-speed/high-temperature service.Their outstanding thermal and oxidative stability inhibitsdeposit formation and grease breakdown in high-temperature applications. Their superior friction-reducing ability helps keep high-speed componentsoperating in their optimal temperature range and helpskeep them running clean.

TRUCK & FLEET PRODUCTS 7

GRG

GWR

GHD

GLC

G-392_94963.qxp 9/25/09 9:12 AM Page 7

Oil analysis enables equipment owners and maintenance personnel to evaluatemotor oil service life and engine condition and save significantly on downtime, equip-ment repair and oil-related costs.

OIL ANALYZERS INC. puts technologically advanced testing equipment in thehands of experienced diagnosticians.

Accurate, reliable OIL ANALYZERS INC. findings may be used to reduce equip-ment replacements and repairs, reduce the volume of lubricant purchased anddestined for disposal and reduce equipment downtime.

OIL ANALYZERS INC. normally turns out reports one working day after a sampleis received. When a time-sensitive condition is detected, OAI calls with the information.

OIL ANALYZERS INC. kits include everything required for analysis: sample gath-ering materials, sample testing and, in the U.S., return postage.

Oil Analysis Pump (G1206) sold separately. For more information on oil analysisand OIL ANALYZERS INC. go to www.oaitesting.com or call (715) 395-0222.

AMSOIL® products and Dealership information are available from your local AMSOIL® Dealer.

AMSOIL® INC., AMSOIL® Bldg., Superior, WI 54880 Printed in U.S.A. © Copyright 2009 (715) 392-7101 Fax (715) 392-5225 or (715) 392-5267 G392 9/09

INC.

AMSOIL Cetane BoostAMSOIL Cetane Boost (ACB) improvesdiesel fuel quality to benefit all dieselengines, especially high-performancedesigns. AMSOIL Cetane Boost reducesoperating costs by increasing fuel econ-omy up to 2 percent. It improves thespontaneous auto-ignition point of dieselfuel, shortening ignition lag time and pro-viding more complete combustion forbetter performance, power and drivability.AMSOIL Cetane Boost improves dieselengine performance, increasing cetane

value by up to seven points.

AMSOIL Diesel ConcentrateAMSOIL Diesel Concentrate(ADF) is a total system cleanerand lubricity improver for alltypes of diesel engines.AMSOIL Diesel Concentratecompensates for the qualityvariances of different fuels(including biodiesels) and thedeficiencies of today’s ultra-low-sulfur diesel fuel (ULSD)for better engine operation. Itreduces cylinder wear, retainsTBN longer, minimizes sootloading and acts as a fuel sta-bilizer. AMSOIL Diesel Concen-trate restores horsepower tolike-new levels and improves fueleconomy by up to five percent.

ADF

AMSOIL Cold Flow ImproverAMSOIL Cold Flow Improver (ACF) for dieselfuel is designed for use in ULSD, yet works wellwith conventional fuels. It functions by mod-

ifying wax crystal formation at low temper-atures to depress the pour point andimprove cold-flow filtration properties.AMSOIL Cold Flow Improver contains jetfuel-type deicer to help prevent ice for-mation in fuels contaminated with water. Itis recommended for use with dieselengines and is compatible with dieselexhaust particulate filters.

AMSOIL Diesel ConcentratePlus Cold Flow ImproverDiesel Concentrate Plus Cold Flow Improver(DFC) improves the performance, fuel effi-

ciency and longevity of diesel engines whilereducing deposits, black smoke and emis-sions. Also lowers the cold filter-pluggingpoint by as much as 34°F and decreasesthe need for #1 diesel fuel that is diluted withkerosene. Convenient combination of twoproducts in one bottle.

DFC

Diesel RecoveryAMSOIL Diesel Recovery (DRC) is an emergencydiesel fuel treatment that dissolves the wax crys-tals that form when diesel fuel has surpassed itscloud point. Diesel Recovery liquefies gelleddiesel fuel and thaws frozen fuel filters, avoidingcostly towing charges and getting diesels back onthe road.

DRC

ACF

ACB

AMSOIL Diesel Fuel Additives

G-392_94963.qxp 9/25/09 9:12 AM Page 8