Upload
enovative-group-inc
View
6.276
Download
4
Tags:
Embed Size (px)
DESCRIPTION
This catalog has all the important information when it comes to the Enovative AutoHot demand controller. The AutoHot demand controller is an on-demand pump control that saves energy and water by only circulating hot water through your circulation when it is needed. It uses advanced sensors and controls to reduce pump runtime from 24 hours a day, down to on average an hour per day or less. You will save electricity, natural gas, and water.
Citation preview
DEMAND CONTROLLED CIRCULATION FOR CENTRAL DOMESTIC HOT WATER
ICC & IAPMO CODE COMPLIANTSIGNIFICANT UTILITY SAVINGS
ENERGY LOSSES IN A CENTRAL DOMESTIC HOT WATER SYSTEM
Approximately 65% of the total energy used in a CDHW system is lost through inefficiencies in
the heating and distribution.
As much as 34% is lost in the recirculation loop, primarily from excessive pump operation.
Most property owners and managers under-evaluate the cost of
constant pump operation by only considering the retail price
(~$400)
The actual (hidden) costs of operating a pump continuously in a
multi-unit building are quite staggering, especially when added
up over the average life (3-5 years) of the product.
THE REALITY OF NOT USING Additional gas used
for water heater
$500-$1000
Longterm Costs
Water Heater LossesCirculation Loop Losses(Distribution Losses)
End-Use Energy(i.e. Hot Water)
%31%34
%35
Mechanical Room
Cold WaterSupply
Hot Water Supply
Hot Water Return
Branch
DecreasedProperty Value(Cost Varies)
Retail Price$400
Purchase Price(The Tip of the Iceberg)
The cost to purchase a pump is only the tip of
the iceberg. Over 90% of the true cost comes
after the purchase is made, in the way
of energy losses and other operational costs.
$200-$300
Additional electricityused for pump
Extra Wear and Tear to the Heating System
(Cost Varies)
THE SOLUTION: Operate Your Distribution with
THE ENOVATIVE SYSTEM "the best demand controlled hot water circulation system available that works in commercial and multifamily buildings."
A pump only needs to run when hot water is not
available, AND when someone is using a hot water
fixture – THIS is called recirculating your
hot water on-demand.
Pumping on demand will:
Put an end to the energy & cost intensive effects of
running the pump when it’s not needed.
Reduce your maintenance costs by extending the
life of your water heating system, from the pipes,
to the tanks, to the water heaters.
Recirculation on-demand is the best balance
between getting hot water quickly while not
wasting energy and overworking
the water heating system.
Annual Costs
Do you keep your lights on when you leave your home?
A pump doesn’t need to run when no one is using hot water.
Do you turn on your lights when there is available sunlight?
A pump doesn’t need to run when hot water is already available
TURN OFF THE PUMP!
THERE IS NO HIGHER EFFICIENCY FOR OPERATING A RECIRCULATION
PUMP THAN WITH
THE PROBLEM WITH HOT WATER DISTRIBUTION
Made in the USA
delivers hot water as consistently
as a pump that operates continuously, but at a
much higher efficiency- without any noticeable
change to the user.
TIMELY HOT WATER
ENERGY SAVINGS
average runtime has been recorded
to be between 30 – 60 minutes per day as opposed
to standard 24/7 pumps that run whether or not
anyone is using hot water.
By activating the pump only when there is user
demand, can save 15 – 30% of
natural gas used by the water heater and 95 –
99% of the pump electricity.
SMART TECHNOLOGY
operates by using sensors. A hot
water demand sensor (flow sensor) instantly
transmits to whenever a user
demands hot water (opens a hot water tap).
Another sensor continuously relays to
. the current temperature of the hot
water that is available in the line.
EXTENDED PUMP LIFE
Because . registers significant
amounts of downtime, the product life cycle
of the system is up to 12 – 15 years.
Typical Pump Runtime
Powered by GRUNDFOS
~1 hour/day
Life Cycle Comparison
Heat Loss Cost Electric Cost Unit Cost
$0 $5K $10K $15K $20K
Typical Pump
24/7
Runtime
WHY USE
“7.1 Efficient Hot Water Distribution (2 points). Design and install an energy-efficient hot water distribution
system. a) Structured Plumbing System: The system must have a demand-controlled circulation loop that is
insulated to at least R-4.”
Multifamily Mid-Rise Buildings Energy And Atmosphere Water Heating (EA 7.1)
USGBC / LEED POINTS:
MINIMIZE PINHOLE LEAKS
sensor controlled technology keeps the turbulent effects
of hot water circulation to a minimum. Doing so reduces wear and tear
on pipes and the occurrence of menacing pinhole leaks.
$140,000
$120,000
$100,000
$80,000
$60,000
$40,000
$20,000
$0$15 $50 $100 $150 $200 $300 $400 $500
Monthly Utility Savings
Res
ult
ing
Incr
ease
in P
roper
ty V
alue
(Bas
ed o
n 5
% m
arke
t ca
p r
ate)
not only offsets the effects
of radiant heat loss in the pipes, but it
minimizes the occurrence of damage to
the pipes.
Reducing the maintenance and repair
costs while lowering utility and energy
charges increases the Net Operating
Income (NOI) and value of your property
dramatically.
THE EQUITY KICKER (NOI)
Save Money and Energy
THE EXTRA BENEFITS...
energy saved isenergy made
HERE’S HOW IT WORKS
The Enovative system has a flow sensor that is installed on the hot water supply that sends a signal every time a tenant opens a hot water faucet.
The Enovative also has a temperature sensor placed on the return line upstream from the pump.
When the temperature sensor reads that the circulation loop is above target temperature, the flow is bypassed and the pump remains off.
When the circulation loop is below target temperature and the flow is triggered the pump turns on delivering fresh hot water to the end user
within seconds.
City Cold Water Supply
Is heated to Approximately 140°F
Hot water is kept in storage until there is a demand for it
Flow sensor is installed on supply line, triggered by user demand
tracks hot water through a heat sensor on the return line, operating only when demand is combined with below target temperature
DESIGN & INSTALLATION
www.EnovativeGroup.com
Detects hot water demand froma single open fixture
Ultra-Sensitive FlowSwitch & Custom Tee
Primes the loop quickly, one time, when hot water is needed
Circ Pump
Adjustable Settings & Diagnostics
Control Boxes
Temperature sensor keeps pump off if there is already hot water
Thermistor
Cut in tee on cold water & screw in flow sensor
Bolt in the new pump
Connect pump & flow switch to control box
Attach thermistor to return line & insulate
EASY INSTALLATION
AC Power Cord
Energy Saved is Energy Made
®Enovative242 Hampton Drive, Venice, CA 90291(866) 495-2734 [email protected]
Distributors:
www.EnovativeGroup.com