Drainage Engineering

Research, development, production, sales & after

sales support from the same hand

Technodrain India Pvt. Ltd.

About Technodrain India Pvt. Ltd

Technodrain India Pvt. Ltd design and

manufacturespecialized Building

Drainage Systems & Solution products for Wet Room, Balcony , Roof ,

Linear Drainage system of load class A-15, B-125, C-250, D400, E600,

F900, Kerb drain & Shallow Kerb drain.

We provide a modern alternative to traditional drainage systems for

showers, balcony & roof combining a successful blend of

innovative components and stylish design which are manufactured

from high grade Top quality raw materials while keeping true to

elegant and minimalist form, and function, at the same time cost

effective.

Whether you are a Builder , architect, contractor, industrial

client or homeowner. We are dedicated to helping you find

your drainage, plumbing or neon flex lighting solution. All in

Stainless Steel 304 and 316 , PC (Poly Carbonate), FRP, ABS, PP

ensuring

high quality flow and hygiene combined with a minimum of

maintenance.

There are many advantages of using a linear slot drain, the

most obvious is the sleek continuous look your shower & balcony

floor will have. Removing the curb and letting your floor tile cover

the whole area appear larger.

Advantages-

• Can be used with any type of tiles shower configuration.

• Can be used to create wet/ dry areas

• Tiling is simplified with minimal cuts required

• Easy to use with any tile size and material

• Reduced tiling cost due to decreased time required. Decreased tile wastage

due to significantly fewer cuts required.

• Level threshold can be created for easy wheelchair/ disabled (ADA)

access

Quality & Functionality

The high quality of components is not limited to the design, material and finish;

ease of handling and installation are given the same attention of details.

The products are designed to provide a long & reliable service life. The smooth

surface guarantees safe drainage and hygiene in bathroom and balconies.

The Grating is made of grade 304 stainless steel (Electro Polished) and channel

/Tray is made in Poly Carbonate ; leak tested prior to dispatch.

The range of grating designs complements personal design preferences and can

enhance the appearance of the room. Grates are also easily replaceable for a

new look.

Tray / Channel

Material: Poly Carbonate.

Height: 25 mm with inbuilt slope.

Length: 500 mm .

Width: 100 mm.

Number of outlet: One bottom central out let :

50 mm with inbuilt Slope .

Grating

Height : 25 mm inside side

Length : 499.5 mm

Width : 99.5 mm. out to out

Thickness : 1 mm

Plating : Electro plating

Material : Stainless Steel 304

Per slot cavity : 5.2 x35 mm .

Weight load capacity (kg) : 350

Shower Grate Components

The basic alloy. Type 304 (18-8) is an austenitic steel

possessing a minimum of 18% chromium and 8%

nickel, combined with a maximum of 0.08% carbon. It

is a nonmagnetic steel which cannot be hardened by

heat treatment, but instead. must be cold worked to

obtain higher tensile strengths.

Shower Tray Components

Made of Polycarbonate; a durable material which is

high impact & low scratch-resistant . Polycarbonate

can undergo large plastic deformations without

cracking or breaking

Technical Considerations –The flow value for a 2” outlet varies depending upon the head of water above the grating.

In the case of shower channels, a head of water is not typical in practice, due to shallower floor grades. Floor

drains can have a head of water due to ‘basin’ profile of floor grades.

Flow values without any accumulation (head of water) should be used when shower channels are placed

around the perimeter of the shower and no shower threshold step is used.

If the shower channel is installed against a wall, there may be a small amount of accumulation (head of

water) depending on the layout of shower area. Grade of shower floor will determine depth of build up.

In case of outflow rate up to 9.51 GPM based on the floor grade such that 0.2” (5mm) head of water possible.

Installation at the entrance is preferred if the outlet flow rate up to 6.65 GPM based on no water accumulation

(head of water).

Hence the choice of Shower Channel generally depends on the flow values of the shower fitting. 70% of

shower heads have a maximum capacity of less than 3GPM. Technodrain India Pvt. Ltd standard channel has

an outflow of 6.65 GPM. This value assumes no head of water above drain; standard channel can be used in

conjunction with the majority of shower head fittings.

Shower Grate Shop

Grating Options

Stainless Shower Drains - SS Body

Tile Shower Drains

Linear Drainage Options –

Installation against the wall – Simplest slope solution in one direction

– slope away from the bathroom – no risk of bypass – use of CPE

flexible membrane recommended.

Walk through: Installation against the wall – Slope in one direction –

just shower area of whole bathroom floor can be sloped towards

channel – use of CPE flexible membrane recommended.

Walk-in: Installation against the wall – Simplest slope solution in

one direction – slope away from the bathroom – no risk of

overshooting water.

Walk-in: Installation at the entrance-

Two directional slope towards the channel.

Channel length should exactly fit the shower opening.

Installation at shower entrance –Slope in one direction, towards the bathroom – possible risk of bypass – slope of bathroom floor towards shower area is recommended to prevent bypass. Channel length should exactly fit the shower opening

Typical Drain Placement in Bathroom Floor Construction

ENTRANCE

Back of the Shower Location

ENTRANCE ENTRANCE

Multi-Unit Shower Room

ENTRANCE

Entrance Way (Curb or Curbless)

The SMART TILE is an innovative breakthrough lifting the image of floor grates to a new focus in decor

Balcony Drains

L

I

N

E

A

R

Ideal for bathroom, garden, balcony, front of garage,

around swimming pool, landscaping, everywhere,

where storm water control is needed.

-Made of plastic (optional with metal grate)

--Optional bottom outlet or side outlet

-- Have A15 , B125 standard. C125 standard with

metal grate

-Economical and decorative ,

- Light, movable and easy installation

- Impact resistant, Chemical resistance

- Easy water flow

- 2 color options (Black and white)

-- Comes with Child Protection System

Dimensions125x80x500 mm

100x55x500 mm

200x120x500 mm

D

R

A

I

N

Inner surface is manufactured in an oval and carries

waste water very fast. easy to install – can be

extended with hand without machinery and are

quickly set in place.

Grates (Plastic/ Metal)

made of high impact

PVC. produced as a

standard length of 50

cm

produced as stainless

metal or galvanized. They

have high-pressure

resistance. produced

regarding to the standard

B 125

Corner Units

Mounted this corner unit by

hand in 90-degree turns or in

TEE-shaped.

Bottom Outlets

used to connect easy with

waste water pipes.

End Cups

Couplings

T Channel

+ Channel

90 Degree Reflexive Channel

In order to obtain easy flow, channels designed with easy beak areas at its sides.

Corner Balcony Drain

Corner Balcony Drain – Flow rate: 8,51 l/s

70mm Plastic corner balcony drain containing 70mm

of input and outlet. Product consists of: Plastic Body

& Grating with 70mm of outlet for terrace and

balcony

Manhole Models

The raw material for PVC, UV

resistant to different sizes, the grid

or full cover option is available with

high-strength products

OFFICE INDIA)

Address:

Eco Drain (India) Pvt. Ltd

Plot No 7 A HSL/Ajanta/Road Aurangabad

Phone:+912065331100

+918856999493

Email Id: ecodrainn@gmail.com