Embed Size (px)
DESCRIPTION
SEPCO Steel Electric Products Company was founded in 1938 as a metal fabricating and stamping company by Morris Reddock and his son Philip, and incorporated in 1952. SEPCO carried a product line which included EMT and rigid one-hole and two-hole pipe straps, reducing washers and switch box supports. Malleable iron, steel and die-cast fittings were added to the product line and SEPCO now currently carries approximately 2,000 SKU's with trade sizes 1/2" - 6" on most product groups and is a leading manufacturer in the elctrical industry. All SEPCO products carry the full UL listing.
Citation preview
Zinc Watertight Connectors . . . . . . .134Aluminum Service Entrance Heads . . . . . . .135
Aluminum Service Entrance Ells with Cover and Gasket . . . . . . .138Entrance Heads . . . . . . .139
Zinc Service Entrance Connectors . . . . . . .140Zinc Non-Watertight Short Body Connectors . . . . . . .141
Zinc Two Screw Take-All Connectors . . . . . . .142Service Entrance Straps and Sill Plates . . . . . . .143
SERVICE ENTRANCE FITTINGS
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:19 PM Page 1
134 (718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223www.sepco-usa.com
Zinc Watertight ConnectorsFor Service Entrance Cable
Applications:Used to connect serviceentrance cable to a serviceenclosure in wet locations.
Features:• 2 Insulating Connectors, 1Bare• U-Flat Style• Assembled with rubbergrommet and steel washer
Standard Materials:Zinc Die Cast
Standard Finish:Zinc Die Cast
UL Listed:E198257
Type 1069C
CATALOGNUMBER
TRADESIZE
WIRESIZE
MINIMUMWIRE SIZEA B
MAX. WIRE SIZEGROM OPENING
A B
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
1060 1” 3 #6 0.310 0.585 0.460 0.715 10 100 34 136421060A 1” 3 #4 0.355 0.680 0.530 0.850 10 100 34 136521064 1-1/4” 3 #3 0.455 0.815 0.550 0.910 10 100 52 136621066 1-1/4” 3 #2 0.480 0.845 0.580 0.960 10 100 52 136721066A 1-1/4” 3 #1 0.525 0.955 0.660 1.120 10 100 52 106601068 1-1/2” 3 #1/0 0.555 1.095 0.705 1.195 5 50 65 136821068A 1-1/2” 3 #2/0 0.595 1.125 0.740 1.235 5 50 65 136831069 2” 3 #1/0 0.585 1.085 0.750 1.195 5 50 87 136921069A 2” 3 #2/0 0.635 1.165 0.740 1.235 5 50 87 136931069B 2” 3 #3/0 0.685 1.285 0.830 1.415 5 50 87 13694201069C 2” 3 #4/0 0.655 1.275 0.890 1.540 5 50 87 136951069D 2” 3 #4/0 0.705 1.385 0.995 1.580 5 50 87 13696
®
SERVICEENTRANCEFITTIN
GS
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:19 PM Page 2
135(718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223
www.sepco-usa.com
Application:Threaded type head used withthreaded rigid conduit and IMCfor pulling service dropconductors
Features:• Weather resistant• Assembled with electricalgrade phenolic insulator withmultiple hole
Standard Materials:AluminumPhenolic Insulator
UL Listed:E198257
Aluminum Service Entrance HeadsFor Threaded Rigid Conduit
CAT.NO.
TRADESIZE
DIMA
DIMB
NPSMTHREAD‘C’ SIZE
HOOD + YOKESCREW ‘D’(2Nos.)
INSULATOR‘E’
CAP SIZE
UNITPACK
STD.PACK
WEIGHT(LBS.)
PER 100
NAED MFG #78-5994UPC/DCI #
400 1/2” 2.7462 1.3435 1/2 - 14 10-24 x 1/2 ECI-050 10 50 25 40050
401 3/4” 3.1244 1.4342 3/4 - 14 10-24 x 1/2 ECI-075 10 50 32 40150
402 1” 3.4475 1.7139 1 - 11.5 10-24 x 1/2 ECI-100 10 50 48 40250
403 1-1/4” 4.1567 1.8835 1-1/4 - 11.5 10-24 x 1/2 ECI-125 - 25 53 40350
404 1-1/2” 5.2087 2.1670 1-1/2 - 11.5 10-24 x 1/2 ECI-150 - 10 112 40450
405 2” 6.6744 2.6950 2 - 11.5 10-24 x 1/2 ECI-200 - 5 130 40550
406 2-1/2” 9.3142 3.3057 2-1/2 - 8 5/16 - 18 x 25/32 ECI-250 - 2 416 40650
407 3” 12.2731 4.1252 3 - 8 5/16 - 18 x 25/32 ECI-250 - 1 418 40750
408 3-1/2” 12.7656 4.5940 3-1/2 - 8 5/16 - 18 x 25/32 ECI-300-7 - 1 810 40850
409 4” 12.7656 5.0787 4 - 8 5/16 - 18 x 25/32 ECI-300-6 - 1 835 40950
®
Type 400
Threaded
SERVICEENTRANCEFITTIN
GS
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:19 PM Page 3
136 (718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223www.sepco-usa.com
Application:Clamp-on type head used withrigid conduit, IMC or E.M.T. forpulling service drop conductors
Features:• Bar type Clamp• Heavy pressure clamp inbody• Screw does not bear directlyon conduit• Weather resistant• Assembled with electricalgrade phenolic insulator withmultiple holes
Standard Materials:AluminumPhenolic Insulator
UL Listed:E198257
Aluminum Service Entrance HeadsFor Threaded Rigid Conduit, IMC and EMT Conduit
®
Type 425
CAT.NO.
TRADESIZE
DIMA
DIMB
DIMC
HOOD + YOKESCREW ‘D’(2Nos.)
CLAMP + YOKESCREW ‘E’(2Nos.)
INSULATOR‘F’
CAP SIZE
UNITPACK
STD.PACK
WEIGHT(LBS.)
PER 100
NAED MFG#78-5994
UPC/DCI #
425 1/2” 2.7462 1.1584 2.2694 10-24 x 1/2 10-24 x 1 ECI-050 10 50 30 42250
426 3/4” 3.1244 1.3711 2.4743 10-24 x 1/2 10-24 x 1 ECI-075 5 25 39 42650
427 1” 3.4475 1.6233 2.7580 10-24 x 1/2 10-24 x 1 ECI-100 5 25 54 42750
428 1-1/4” 4.1567 2.0015 3.1205 10-24 x 1/2 10-24 x 1-1/4 ECI-125 5 25 56 42850
429 1-1/2” 5.2087 2.2694 3.7509 10-24 x 1/2 10-24 x 1-1/4 ECI-150 - 10 88 42950
430 2” 6.6744 2.6634 4.3340 10-24 x 1/2 10-24 x 1-1/4 ECI-200 - 5 135 43050
431 2-1/2” 9.3142 3.6406 5.6421 5/16-18 x 25/32 5/16-18 x 2 ECI-250 - 2 445 43150
432 3” 9.3142 3.9400 6.3670 5/16-18 x 25/32 5/16-18 x 2 ECI-250 - 1 448 43250
433 3-1/2” 12.7656 4.8186 6.9226 5/16-18 x 25/32 5/16-18 x 2 ECI-300-7 - 1 810 43350
434 4” 12.7656 5.2205 7.6239 5/16-18 x 25/32 5/16-18 x 2 ECI-300-7 - 1 875 43450
Clamp-On Type
SERVICEENTRANCEFITTIN
GS
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:20 PM Page 4
Application:Combination entrance cap to fit2 - 21⁄2” mast and has 11⁄4 - 2”cap.
Features:Set-screw type.
Standard Materials:AluminumPhenolic Insulator
UL Listed:E198257
Aluminum Service Entrance HeadsFor Threaded Rigid Conduit, IMC and EMT Conduit
137(718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223
www.sepco-usa.com
®
CAT.NO.
TRADESIZE
DIMA
DIMB
DIMC
DIMD
DIME
SET SCREWSCREW ‘F’(2Nos.)
CONDUITSIZE
INSULATORCAP SIZE
UNITPACK
STD.PACK
WEIGHT(LBS.)
PER 100
NAED MFG#78-5994
UPC/DCI #
3032 2” 4.7595 3.4396 2.6713 2.4586 1.4026 1/4 - 20 x 5/8 2 1-1/4 - 10 80 30325
3033 2-1/2” 5.3032 3.4120 3.2150 2.9708 1.5602 1/4 - 20 x 1/2 2-1/2 1-1/4 - 10 90 30335
3035 2-1/2” 6.5995 4.6256 3.1441 2.9471 1.1820 1/4 - 20 x 5/8 2-1/2 2 - 5 155 30355
Type 3032
Mast Type
SERVICEENTRANCEFITTIN
GS
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:20 PM Page 5
Aluminum Service Entrance Ells with Cover and Gasket
For Threaded Rigid Conduit and IMC
138 (718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223www.sepco-usa.com
Application:To provide access to the insideof a service raceway, for wirepulling, where the racewaychanges direction. Materialfinish is metallic gray.
Features:• Assembled with fiber gasketand aluminum die cast cover
Standard Materials:Aluminum
UL Listed:E198257
®
Type 412
CATALOGNUMBER
TRADESIZE
DIMA
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
412 1/2” 3.79 1.76 10 50 26 41250413 3/4” 4.02 1.99 10 50 31 41350414 1” 4.94 2.50 5 25 54 41450415 1-1/4” 5.60 2.72 - 10 105 41550
415XL* 1-1/4” 7.91 2.75 - 10 140 41551416 1-1/2” 6.79 3.10 - 10 130 41650417 2” 7.74 3.88 - 5 170 41750
*Extra Long
SERVICEENTRANCEFITTIN
GS
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:20 PM Page 6
Entrance HeadsFor Threaded Rigid Conduit, IMC, PVC and EMT Conduit
139(718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223
www.sepco-usa.com
Type NS11
Type NS7A
Application:For outlet boxes and hubs.
Features:• Water resistant design
Standard Materials:PVC
Application:Used with Type U serviceentrance cable.
Features:• Removable cap andtwo-piece insulator makewire pulling and assemblyeasy
Standard Materials:Aluminum
UL Listed:E198257
CATALOGNUMBER
TRADESIZE
DIMA
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
NS9 3-#8,6,4,2 2.75 2.50 - 50 28 34096NS10 3-#1/0 - 2/0 4.25 4.00 - 10 70 34106NS11 3-#3/0 - 4/0 4.25 4.81 - 10 70 34116
CATALOGNUMBER
TRADESIZE
DIMA
DIMB
DIMC
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
NS2 3-#8 to 3-#1 2.06 2.97 2.26 - 50 26 34025NS7A 1/0 - 4/0 3.18 4.52 3.60 - 10 31 34175
Service Entrance Heads
®
®
SERVICEENTRANCEFITTIN
GS
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:20 PM Page 7
140 (718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223www.sepco-usa.com
STEELZinc Cable and Conduit ConnectorsFor Non-Metallic Sheathed Cable and Service Entrance Cable
SERVICEENTRANCEFITTIN
GS
®
CATALOGNUMBER
TRADESIZE
DIMA
DIMB
DIMC
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
SC1 3/4” 0.450 1.031 1.220 25 250 10 32012SC2 1” 0.645 1.190 1.500 20 200 16 32022SC3 1-1/4” 0.660 1.330 1.900 10 100 25 32031SC4 1-1/2” 0.740 1.470 2.115 10 100 36 32042SC5 2” 0.750 1.620 2.640 5 50 50 32052
CATALOG NUMBER SE/OVAL DIAMETER IN. SER/ROUND DIAMETER IN.
SC1Non-Metallic Cable 10-3 through 8-2
(.52 by .61) and (.51 by .80) (.59) and (.69)
SC2Non-Metallic Cable 10-3 through 4-3
(.51 by .80) and (.62 by .975) (.69) and (.92)
SC3 (1.065 by 0.635) and (1.250 by 0.740) -SC4 (1.065 by 0.635) and (1.250 by 0.740) -SC5 (1.405 by 0.875) and (1.450 by 0.875) -
Type SC1
Service Entrance ConnectorApplication:Non-watertight. To make atermination of non-metallicsheathed cable and serviceentrance.
Features:• Assembled with die castlocknut and tri-combo screws
Standard Materials:Zinc Die Cast
UL Listed:E198258
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:20 PM Page 8
141(718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223
www.sepco-usa.com
RAINTIGHTZinc Non-Watertight Short Body ConnectorsFor Non-Metallic Sheathed Cable and Service Entrance Cable
SERVICEENTRANCEFITTIN
GS
Application:Used with locknut to terminateservice entrance cable toenclosure.
Features:• Assembled with die castlocknut and tri-combo screws• For round cable
Standard Materials:Zinc Die Cast
UL Listed:E198258
Type C50S
Type C50ST
CATALOGNUMBER
TRADESIZE
DIM AMIN.
DIM AMAX.
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C50S 1” 0.620 1.140 1.500 10 100 15 64601C51S 1-1/4” 0.700 1.380 1.900 10 100 24 64602C52S 1-1/2” 0.750 1.610 2.115 10 100 34 64603C53S 2” 0.900 2.040 2.640 5 50 46 64604
CATALOGNUMBER
TRADESIZE
DIM AMIN.
DIM AMAX.
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C50ST 1” 0.620 1.140 1.500 10 100 15 90138C51ST 1-1/4” 0.700 1.380 1.900 25 250 24 90139C52ST 1-1/2” 0.750 1.610 2.115 25 250 34 90140C53ST 2” 0.900 2.040 2.640 10 100 46 90141
Insulated
®
CATALOG NUMBER SE/OVAL DIAMETER IN. SER/ROUND DIAMETER IN.
C50S and C50STNon-Metallic Cable 10-3 through 4-3
(.51 by .80) and (.62 by .975) (.69) and (.92)
C51S and C51STNon-Metallic Cable 4-3 through 2-3
(.67 by 1.06) and (.73 by 1.235) 1.19
C52S and C52ST (1.15 by 0.73) and (1.41 by 0.89) 1.48C53S and C53ST (1.405 by 0.875) and (1.450 by 0.875) -
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:20 PM Page 9
Zinc Two Screw Take-All ConnectorsFor Armored Cable, Metal Clad, Flexible Metallic Conduitand Non-Metal Sheathed Cable
142 (718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223www.sepco-usa.com
SERVICEENTRANCEFITTIN
GS
Type C50Z
Type C50ZT
CATALOGNUMBER
TRADESIZE
DIM AMIN.
DIM AMAX.
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C48Z 1/2” 0.40 0.95 1.87 25 250 10 32482C49Z 3/4” 0.50 1.10 1.84 20 200 12 32492C50Z 1” 0.62 1.14 2.00 10 100 15 32502C51Z 1-1/4” 0.50 1.38 2.28 10 100 25 32512C52Z 1-1/2” 0.75 1.61 2.49 10 100 38 32522C53Z 2” 0.90 2.04 3.35 5 50 50 32632
CATALOGNUMBER
TRADESIZE
DIM AMIN.
DIM AMAX.
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C48ZT 1/2” 0.40 0.95 1.87 25 250 10 34867C49ZT 3/4” 0.50 1.10 1.84 20 200 12 34967C50ZT 1” 0.62 1.14 2.00 10 100 15 35067C51ZT 1-1/4” 0.50 1.38 2.28 10 100 25 35167C52ZT 1-1/2” 0.75 1.61 2.49 10 100 38 35267C53ZT 2” 0.90 2.04 3.35 5 50 50 35367
Insulated
Application:Used with locknut to terminateservice entrance cable toenclosure.
Features:• Take-all Type• Concrete tight when tapped
Standard Materials:Zinc Die Cast
UL Listed:E309514
®
C US
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:21 PM Page 10
143(718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223
www.sepco-usa.com
Application:For oval service cable.
Standard Materials:Steel
Application:Prevents water from enteringstructure when used withsealing compound.
Standard Materials:Aluminum
Service Entrance Straps and Sill PlatesFor Service Entrance Cable
Type 870S
Type 260L
CATALOGNUMBER
TRADESIZE
DIMA
DIMB
DIMC
DIMD
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
850S “3-#8, #6, or #4” 1.695 0.400 0.570 0.275 100 1000 2 18507860S 3-#3 or #2 1.950 0.615 0.580 0.275 100 1000 2 18607870S “3-#1#0, #1/0 or #2/0” 2.480 0.800 1.000 0.325 100 1000 8 18707880S “3-#3/0, #4/0” 2.795 0.920 1.010 0.325 100 1000 9 18807
CATALOGNUMBER
TRADESIZE
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
260L 3/0-4/0 - 10 70 10010
Aluminum Sill Plates
SERVICEENTRANCEFITTIN
GS
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:21 PM Page 11
144 (718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223www.sepco-usa.com
SERVICEENTRANCEFITTIN
GS
Application:Prevents water from enteringstructure when used withsealing compound.
Standard Materials:PVC
Sill Plates
Discontinued
For Service Entrance Cable
CATALOGNUMBER
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
26P 10 100 4 32645
PVC Sill Plates with Sealing Compound and Wood Screws
Type 26P
SEPCO 2011 (9) 133-144:Layout 1 9/6/11 3:21 PM Page 12
