The metal and non-metal laser cutting machine utilizes high speed and additionally high temperature ionized gas alongside a circular segment, to cut diverse sorts of materials.

An overview of metal and non-metal cutting machines

The plasma cutter light has a high speed ionized gas that directs power, which is utilized to warm the work piece and in the end liquefies the material. While the reason for the circular segment is to dissolve the material with its high warmth, the capacity of the gas is to clear the liquid material out from the piece and cut the material. Because of the power of the plasma, you get a neat and tidy with almost no or no slag by any stretch of the imagination.

Plasma cutting procedure

Plasma cutting machines are accessible in an assortment of sorts, for example, plasma lights, plasma lights, and plasma cutters. Compacted air or nitrogen is utilized as a cutting gas as a part of plasma cutting lights. The lights have a limited width kerf alongside a water-cooled anode. Plasma lights utilize a high temperature gas steam, which is created by going the gas through an electric circular segment release. The plasma light has two anodes that are metallic and tubular in nature. The electrical bend streams between the negative or positive anodes. Plasma cutters are uniquely utilized for cutting steel and materials that lead power.

Diverse sorts of Plasma cutting machines

Advantages of Plasma cutting machines

1.They give excellent cuts and quick travel speeds.

2.It is an ease process for short keeps running as no physical tooling is required.

3.A practical alternative for thick metal sheets.

4.When contrasted with laser cutting can cut thicker sheets.

5.It can be utilized to cut a wide assortment of geometric shapes alongside 2D shapes that don't require an excess of accuracy.

ParticularsThe procedure can be utilized on ferrous and non-ferrous metals and requires just programming tooling. It lessens cost by decreasing aggregate cut length. Now and again, some twisting may happen on complex parts. The cut edge is to some degree roughened and may demonstrate the vicinity of an oxide layer. Further, the plasma cut surface may not be absolutely opposite to the surface of sheet material. Our company provides you information about various types of CNC machines along with the techniques of metal and non-metal laser cutting machines.

Contact UsJinan AccTek Machinery Co.,Ltd

Website: http://www.acctekcnc.com/Office Address:

2-1015, Yinzuo Jingdu  International Plaza, No. 66, Shunhe East Street,

Shizhong Dist.,JinanChina

Tel： 086-0531-86160023   E-mail - info@acctekcnc.com