Embed Size (px)
Citation preview
SAFETY & EFFICIENCY- go hand in hand
Project Sales Corp is pleased to announce its appointment as theAuthorised Representatives in India for the Nordic HSE Group,Norway and Rigtools, Denmark. Rigtools makes a selected range ofinnovative rig use products that is designed to make your workeasier, saferand more productive.
http://nordichsegroup.com http://rigtools.net
The PSC Rigtools Product Range
Innovative Products to Improve Safety and Efficiency
BHA Wash Tool Rigtools Sling Rack
Pipe Wash and Dope Tool S-Torque Tool
Monsoon Shaker Screen Washer Safelift
HP Wash Down Units and Accessories
RigtoolS Taglines
Flowline Magnets Rigtools Backsaver
Drift Cabinet Tarpaulin Hole Covers
Rigtools sub Clamp Elevator Handling Tool
SNAPSHOTS – KEY PRODUCTS
BHA WASH TOOLThe high level of safety in today’s drilling operations around the worldrequires special attention to equipment. Most drilling rigs have fullyautomated derrick and pipe handling systems. In some countries thelegislation prohibits personnel to work on the drill floor while the automaticpipe handling machines are in use. But still we experience personnel usingHP cleaners when BHA etc. are pulled through rotary.
In order to prevent this from happening we have developed the BHA WashTool. Utilizing the BHA Wash Tool the BHA can still be high pressurecleaned, but without exposing personnel to danger of dropped objects orworking close to remote operated machines on Drill floor (Red Zone). Toensure maximum performance the BHA Wash Tool will be specificallydesigned to suit any drilling unit.
The BHA Wash Tool cleans BHA and other oddly shape and sized parts inthe drill string using high pressure water in very limited volumes. The BHAWash Tool will be placed on top of the diverter or bell nipple and connectedto rigs HP wash system. The tool has 4 to 6 high pressure nozzles facingwell center. BHA Wash Tool nozzles will be connected to the rigs HPsystem or a special high pressure unit fit for purpose. Actuation of thewater HP water flow can be done locally on the drill floor or remotely fromDriller cabin. BHA Wash Tool is fully certified for offshore conditions.Following certificates within compliance:
NORSOK I CE- Certification I Material certificates I Welding certificatesI Pressure test
http://rigtools.net/BHA-washtool-reference
https://youtu.be/sppwpaalAlk
BHA Wash Tool highlights:
• Improves safety on rigfloor.• No personnel in Red Zone during pulling of different BHA’s.• Clean BHA when racking back or laying down on deck.• No debris on drill floor or windows from using manual high pressure washer. All debris will be kept below rotary.• BHA can be pulled faster out of hole, no stops for manual HP cleaning.• BHA Wash Tool will be installed after running the diverter and stays in place during entire operation.• Easy to install on top of diverter.• BHA Wash Tool is welded and has no loose items – No risk of dropped objects.
BHA wash tool experience on Transocean Searcher
The BHA wash tool has worked as intended. In my opinion this is a step in the right direction that every drilling rig should consider. It enables us to stay in compliance with red zone requirements without compromising the quality of the craftsmanship on the rig floor. We keep the floor clean while pulling BHA, which is a HSE benefit as a slippery deck represents a risk. It saves time, not having to stop and clean BHA for every couple of meters. The deck crew is also happy, as the string components coming out are cleaner than before.The tool is custom made to fit our diverter. It's mounted once the diverter is in place and stays there until removing the diverter for pulling BOP/riser. It does not affect any operation. The ID of the tool allows the diverter insert packer to pass through. Rigtools have been easy to cooperate with, and they have delivered full documentation.
The high level of safety in today's drilling operations around the world requires specialattention to equipment. Most drilling rigs have fully automated derrick and pipe handlingsystems. In some countries the legislation prohibits personnel to work on the drill floor whilethe automatic pipe handling machines are in use. But still we experience personnel using HPcleaners and manual dope brushes when Drill Pipe and other tubulars are cleaned and dopedprior connection.
In order to prevent this from happening we have developed the Pipe Wash & Dope Tool.Utilizing the Pipe Wash & Dope Tool the tubulars will become high pressure cleaned anddoped without exposing personnel to danger of dropped objects or working close to remoteoperated machines on Drill floor (Red Zone).
The Pipe Wash & Dope Tool cleans and dopes DP and DC; using high pressure water in verylimited volumes. How does the Pipe Wash & Dope Tool work? The pipe is lowered down intothe tool by means of the pipe handler. When the pipe reaches the bottom the treads and insidetool joint is cleaned by means of HP water and air. After a few seconds the pipe can be pulledupwards and threads is applied with a thin layer of dope.
To ensure maximum performance the tool needs supply of HP water (175-200 bars at 60 ºC)and control air of 6 to 10 bar. Rigtools can deliver HP Hot Wash unit RT-EX100 fit for purpose.
In cold conditions we recommend to preheat the dope to ensure perfect layer on threads.Rigtools supplies heating box. Pipe Wash & Dope Tool is fully certified for offshore conditions.Following certificates within compliance:
NORSOK I CE- Certification I Material certificates I Welding certificates
Pipe Wash & Dope Tool
Monsoon Shaker Screen WasherThe high level of safety in today's drilling operations around the world requires specialattention to clean work areas and mud exposures. To increase safety and preventpersonnel being exposed to mud and chemicals, we have introduced the automaticMonsoon Shaker Screen Washer.
Monsoon Shaker Screen Washer highlights:• Fast efficient cleaning of multi-size screens (690x1300x41mm)• Consistent and gentle wash to prolong screen lifetime• Releases human resources• Crew will not be exposed to mud• Work area is always clean and tidy• 100 % control with the critical substances• Mud and cuttings will be drained• Vapors will leave through exhaust pipe• Stainless steel and top quality components• Electrical controlled sequences for precise and reliable operation• Small footprint (900x900mm) – easily installed in Shaker Room
Monsoon is fully certified for offshore conditions. Following certificates within compliance:ATEX certified I NORSOK I CE-Certification
The machine is made with an inner and outer housing. This is to reduce noise level and tominimize personnel being exposed to hot surfaces if using hot water. The machine can becustom made to fit your screens, this allows us to optimize the size of the machine andensure an easier fit into your shaker house.
Watch Animation http://rigtools.net/shaker-screen-clean-machine
Watch the animation at http://rigtools.net/rigtools-s-torque-tool
S-Torque tool
Many rigs are equipped with manual mud pump fluid end caps. These caps are usually tightened and loosened by useof sledgehammer. Use of sledgehammer is a potential hazard to personnel and equipment. Rigtools have introduced theS-Torque Tool in order to prevent accidents while handling mud pump fluid end caps. This tool eliminates use ofsledgehammer.
Highlights:• No use of sledgehammer• Eliminates potential hazard• Controlled torque• Compact design• One size fits all
Drift CabinetCabinet with 20 Drifts for Drillpipe, Heavy weight drillpipe, Drill Collars and other tubulars.
Highlights: • Driller does have the Drift Cabinet key and has full control of where
the Drifts is located.• Always full control of how many and which size of drifts available (long
lifetime because Drifts don't disappears).• Always correct size of Drift available.• Less risk of dropping wrong Drift because size is stamped into each
Drift.• Slick line can easily be attached to Drift.• No flow restriction due to large ID on Drift.
Product description:• Cabinet is made of stainless steel and delivered with Pad Lock.• Drifts are made of stainless steel.• Drift sizes are stamped on each drift.• Each Drift has a special marked place inside the Cabinet.• Inventory list with Drift specifications does follow the Cabinet.
Rigtools Flowline MagnetsThe high level of safety, efficiency and cost in today's drilling operations aroundthe world requires special attention to equipment. Most drilling rigs have the oldtype of Ditch Magnets laying in the bottom of the Flowline. They are heavy andnot efficient or safe to use, which causes risk of back injuries, cut fingers, mudexposures and mud pump failures.
In order to prevent this we have developed Rigtools Flowline Magnets. Utilizingthe Magnets the wellbore fluid will be cleaned without exposing personnel todanger or injuries.
How does the Rigtools Flowline Magnets work?The Flowline Magnets system is placed in a frame which fits to the header boxor flowline (or both). This provides a complete magnetic barrier across the fullwidth and depth of the fluid path. Each Flowline Magnet is pulled one at a timerather than the whole frame having to be lifted. When the magnetic material ispulled above the stopper plate any metal will be discharged from the FlowlineMagnet.
Rigtools Flowline Magnets highlights:• Crew will be not exposed to mud.• Improves safety. Reduces risk of cut fingers and back injuries.• No time spent on cleaning Magnets.• Releases human resources.• Easy to install and retrieve in the Ditch or Flowline.• Swarf will be removed from the Magnets one by one.• Eliminates or reduces metal in Mud Pumps. Case Study at -
http://rigtools.net/files/FlowlineMagnets%20SFAC_en2.pdf
Rigtools ClampRigtools Clamp improves safety and efficiency when handling lifting sub's onbottom hole assemblies.
Rigtools Clamp highlights:• Time saving and more safe when installing and removing lift subs in vertical
and especially horizontal position.• No loose bolts or shackles required.• No need of lifting slings.• Less risk of hanging up in threads when removing lifting subs in vertical
position.
How to use the Rigtools Clamp:Rigtools Clamp is clamped directly on the lifting sub when installing or removingthem from BHA items.
Product description:Rigtools Clamp is made of stainless steel.Weight: 6 kg without lifting gear.We supply the Clamp in following sizes; 3 ½" - 5" - 5 ½" - 5 ⅞" - 6 ⅝"The clamp is delivered with lifting chains and full certification for offshore use.
Rigtools ClampStatement from customer:
The Rigtools Clamps make handling of our lifting subs safer and easier , no more wrapping slings round subs, quick and easy installation of the clamp either vertically or horizontally, no shackles bolts or safety pins to worry about, the subs are held securely and rotate easily so installing into collars etc made safer with little chance of nipped or crushed fingers when using chain tongs. We have a 5½” and 5” Rigtools clamp, two of the best additions to drill floor safety and efficiency we have had.
Best Regards,Alistair. Maersk Convincer
Rigtools Sling RackRigtools Sling Rack improves safety and efficiency when selecting slingsfor lifting operations. Rigtools Sling Rack is designed to ensure use ofcorrect slings in lifting operations.
How does the Sling Rack work?The beams accommodating the slings are adjusted to fit the differentsling sizes. This is done by adjusting the gap between the beams to fitthe sling ferrule outside diameter.The beam can be clearly marked with sling SWL.
Rigtools Sling Rack advantages:• Prevents use of wrong slings (SWL) and thereby potential incidents.• POKA YOKE solution.• Efficiency.• Improves housekeeping• The rack is easy to install any place on the rig.• If required the rack can be placed in designated locker.
SafeliftSafelift improves ergonomics while handling and operation of plug valves.
Safelift highlights:• The Safelift improves the ergonomics and decreases the load on persons
carrying valves.• Safelift ensures firm and secure grip in all valve positions• Designed for easy mounting on plug valves• Safelift can be left on valve while being used• Fits Anson, FMC and SPM-valves.• Easy opening and closing of valves. No loose bars required.• When turned to closed position, the valve can be transported around the
work area. Also up and down stairs.• Safelift makes it easier to see whether the valve is in open or closed
position.• Locking the valves in open or closed position is also an option.
Product description:• Safelift is made from seawater resistant aluminum• Welded body in 8 mm aluminum with Ø 25 mm serrated handles for safe
transport and opera- tion• Three valve lock bolts made from Ø 30 mm diameter aluminum bar• Weight; 2,1 kg
Elevator Handling ToolRigtools Elevator Handling Tool improves safety andefficiency when handling manual and auto elevator inall sizes.
Product description:• Elevator Handling Tool is made of stainless steel• Weight: 11 kg• Is delivered with full lifting certification for offshore
use
How to use the Elevator Handling Tool:• When the auto or manual elevator is hanging on the
bails, then simply pick up the Elevator Handling Toolwith a winch and close the elevator around it
• Slings is no longer required• Elevator is always ready to be picked up and
installed on the Bails because the Elevator is storedwith the Handling Tool inside
Rigtools Backsaver
Rigtools Backsaver is a hydraulic or pneumatically powered drill pipe slip lifter. It can be operated from the driller’s console or at a safe distance from the slips.
Rigtools Backsaver highlights:• Keeps people out of red zone• Reducing the number of personnel required on the rig floor• It will extend slip and insert life by properly setting and pulling slips• Easy and quick to install• No need of removing rotary insert bowls or master bushing like other type of automatic slips or Slip lifter
Portable Container Access RampA lightweight, strong Portable Ramp, the ideal solution to provide easy access to containers etc.The Portable Ramp is easy to position, handle and transport. The ideal temporary solution to provide access when and where you need it.
Product description: Portable Container Access Ramp is made of aluminium with slip-resistant surface.
Available in standard specifications: Model/Width/WeightB800 800 mm 30 kgs.B1200 1200 mm 38 kgs.Alternatively, we can manufacture to your specific requirements
Tarpaulin Hole CoverS
Tarpaulin hole cover for the rotary table to avoid loose parts falling downhole.Special made Tarpaulin covers for Riser etc.can be made on request
The PSC Rigtools Taglines
To avoid crane lift loads collides with other objects, or creating hazardous condition to personnel - Rigtools Taglines attached to the load, allow personnel to have greater control of the lifting operation in a safe distance.
Taglines are available in standard lengths –• 6 metres• 8 metres• 12 metres
Rigtools Tagline highlights:• High visibility Nylon rope.• Quick Attach and Release.• Variety of Lengths Available.• No Knots, Tangles or Cut-offs.
Ready stock at Project Sales Corp, Visakhapatnam, India
NORDIC HSE GROUP NORWAY RIG RULER AND TALLY BOOKS
Easy to read pocket rule for oil and gas professionals, making oilfield measurements and calculations quicker to perform.
Rigrule provides the oil and gas industry with a robost and cost effective pocket tool. Using inch fractions for accurate measurements is critical. Having an easy to read rule in your Tally book ensures you can quickly and easily identify these measurements.
Rigrule makes the task of measuring in inch fractions simple and can be used in conjunction with O.D. and I.D. callipers when measuring bottom hole assembly, measuring nuts and bolts and measuring tool sizes etc. Industry recognised formulas and convensions have been etched on the reverse side of the rule, avoiding the need to look elsewhere for this information.
Rigrule can also be used as a stright edge for checks on couplings and pulley alignments etc.
A hole has been inserted into the rule to allow a lanyard to be attached to prevent it from being accidentally dropped when working around rotary table or at heights.Priced at $11.70 Each when you buy 250+ pcs.
Contact Us
INDIA REPRESENTATIVES -Project Sales Corp28 Founta Plaza,
Suryabagh,
Visakhapatnam 530020, India
Call +91-891-2564393; 6666482
Sales – Anil +91-9866467276
Tech – Satish +91-98851-49412
Customer Support – Archana +91-7729990662
Cust Support – Ranganath +91-891-2564393 Ext 23
Marketing – Indu Bala [email protected]
www.projectsalescorp.in
Branch – Kakinada
Direct Invoicing possible from Nordic for duty benefits -
Nordic HSE GroupP: +47 78 40 33 33
E: [email protected]: www.nordichsegroup.com
Contact information to use for all enquiries etc.
C: +47 45 80 84 88E: [email protected]
Stian Hætta FjellheimManaging Director
Nordic HSE Group ASMarkedsgata 3
9510 AltaNorway
P: +47 78 40 33 33C: +47 45 80 84 88
