Embed Size (px)
Citation preview
Flake Ice Machine
Snow Ice MachineWater Chilling Plant
Condensing Unit
Cold Room
Ice HandlingSystem
Seafoodprocessing
Amusement Park
PharmaceuticalIndustries
Concrete cooling
Chemical & Dyes
Poultryprocessing
India’s No. 1 in Flake Ice Maker
Exporting to Over 10 Countries
PRAJ REFRIGERATION INDUSTRIES
PRAJ FLAKE ICE MAKER
Product DescriptionFlake ice is Small ice in Flat Pieces. The Most Important Application of PRI Flake Ice Plant is in the concrete industry . The classical flake ice of high quality is produced on refrigerated drum by spraying water onto the drum’s ice cold surface where it freezes immediately. After sub-cooling to -7 degree C the ice is sheared from the surface by the ice removal tools and it falls out of the bottom of the ice maker
Model M. O. C.Pump(HP)
Motor(HP/RPM)
Capacity(MTPD)
RefrigerationTR/KW
Physical Size of Machine Total Weight (KG)
500
600
700
1850
2010
2600
3100
4250
48002750 mm
2750 mm
2150 mm
2150 mm
2150 mm
2150 mm
1220 mm
1150 mm
1050 mm650 mm
700 mm
850 mm
1500 mm
1500 mm
1500 mm
1500 mm
2050 mm
2050 mm2050 mm
2500 mm
2450 mm
2100 mm
1750 mm1750 mm
1350 mm
1150 mm
900 mm
850 mm
Height Width Length
1.35 - 1.8 /4.75 - 6.33
2.7 - 3.6 / 9.5- 12.7
4.5 5.4 /15.8 - 19
9 - 12.6 /31.68 - 44.3
12.5 - 16 / 44- 56.3
18 - 21.6 /63.36 - 76
25.5 - 30.6 /90 - 107. 7
34-41.4 /120 - 146
46 - 68 / 162 -240
0.75 - 1
1.5 - 2
2.5 - 3
5 - 6
5 - 7
7 - 8
7 - 10
10 - 12
10 - 14
15 - 17
15 - 19
20 - 23
20 - 25
25 - 35
25 - 40
0.25 HP /1440RPM
0.33 HP /1440 RPM
0.50 HP /1440 RPM
0.25
1.0 HP /1440 RPM
1.0 HP /1440 RPM
1.0 HP /1440 RPM
1.0 HP /1440 RPM
1.5 HP /1440 RPM
1.5 HP /1440 RPM
0.25
0.25
0.5
0.5
0.5
0.5
1.0
1.0
SS
SS
SS
SS
CS
SS
CS
SS
CS
SS
CS
SS
CS
SS
CS
P-050
P-075
P-100
P-250
P-300
P-400
P-500
P-800
P-950
Flake Ice Generator Specifications
PRI SNOW MAKING SYSTEMS
PRI ice equipment has been installed at large ski resorts , theme parks and outdoor snow surfaces for skiing , snow boarding and winter recreation . Produced by industrial flake ice makers, PRI snow can be used to create a realistic winter environment to enhance the visitor’s experience .
PUFF PANEL COLD STORAGE ROOM
*Puff insulated panel 5 inch thickness with 38-40 kg/m Density *Storage capacity as per requirement from 25 tons to 150 ton *Inner and outer 0.5 mm SS/GI powder coated sheet used .
Condenser and Receiver
*Manufactured from IS 2062 grades /BQ 516 Gr.70 Plates*Condensers are very rugged constructed and durable *Tested with Hydro pressure test with 400 PSI at zero leakage.*Two side dish end welded with zero leakage tested . *All Welding Joints Radiography Done & 100 % Tested
Water chilling plant
*Manufactured using high grade tested material .*Available in horizontal/vertical type .*Manufactured in SS or CS Tested Tubes *Provide Safety valves & Equipments.*Enclosed Surge Drum with liquid level controller *Tested at Hydraulic Pressure 400 PSI at zero leakage
PRAJ REFRIGERATION INDUSTRIES
PRI- Ice Storage and Delivery system
Ice Storage and delivery System -PRI ice storage and delivery system is ideally suited to store form 25 to 150 tons of ice . Automated PLC controlled system uniformly levels and Discharge up to and Point
The system discharges ice via screw conveyors as per requirements. These systems are available in the capacities ranging from 25 and 150 Tons storage capacity . we can also supply with customized PUFF insulated and /or refrigerated rooms
Screw ConveyorsScrew conveyor system are the most efficient solution for conveying ice . In order to provide highest flexibility PRI offers a wide range of standardized systems, covering the most common applications.
Details of standard delivery screw conveyors:Length : 2 m to 35 m.Diameter : 300 mm to 450 mm.Execution : trough or tube screw conveyor.Delivery rate : 10t/h to 15 t/h at a filling of 90 %
The screw conveying system is an economical solution to transport ice . Two batching plant can be supplied simultaneously. PRI provides hot dipped galvanized screw conveyors in open trough and in tube execution . The length will be according to the customer.
PRI Concrete Cooling Solution
Benefits of flake ice
1.Flake ice has the highest surface area per ton of ice providing a greater cooling efficiency than any other ice .2.Short melting point by the use of flake ice compared to any other ice .3.Shortage mixing time of the batching plant compared to any other ice as flake ice melts rapidly 4.The latent heat ,the principal source of the cooling is 100% or even higher as the flake ice is sub-cooled (-7 degree )5.Due to dryness , the cooling input of flake ice can be accurately calculated and its effects on the mixtures temperature are quickly apparent .6.Flake ice is free flowing , its flakes remain crisp and do not stick together nor do they form blocks .
PRI ice equipment is the leader in supplying ice making ,storage and delivery systems for concrete cooling applications. PRI ice equipment has been used for mass pour concrete and ready-mix projects around the world and PRI flake ice is preferred for critical pours to reduce the energy dissipation of the exothermic heat generated during the concrete curing process .
PRI Solutions for Concrete Cooling
Comparison to other types of Ice
The Leader in ice Technology
Since 2005, Praj Ice Equipment has been known the world
handing equipment. The Praj Products line includes flake ice
PRAJ REFRIGERATION
INDUSTRIES
Email : [email protected]/[email protected] : www.prajrefrigerationindustries.com & www.indiamart.com/prjajrefrigeration
Meat & PoltryProcessing and value-added prducts. Bakery
Dough cooling.
PRAJ REFRIGERATION INDUSTRIES
Registered office :A/203, Durvankur Society, 2nd Floor, Nagar Mundhwa Bypass, Kharadi,Pune- 411014 (Maharashtra - India)
Manufacturing Unit :Gat No:68/2 Milkat No: 302, Post: ShirswadiWadeBolhai, Tal: Haveli, Dist : Pune - 412 207 (Maharashtra - India)
TELL NO : +91 20 - 65249542/65343794 CELL NO : +91 9890146817/9028187170
