Warm Welcome

ETERNITY MEXThe Military Exchange

(ULSB MK III)

Introduction

Technology

Architecture

Functions and Operational Specifications

Management and Maintenance

Key Differentiators

Agenda

 

Introduction

ULSB MK III Switch

Sturdy Assembly in a Compact Form factor

Ruggedized as per JS55555 Standards

Ruggedized Main Distribution Frame (LTB)

EMI/EMC MIL STD 461-D Standard Compliance

Compatible with Existing Field Exchanges

JSS-55555

MIL-STD-461 D

Technology

Functions as Local/Transit Switch

Digital PCM-TDM and IP Technology

High-Density Digital 1024X1024 Switching

Distributed Processing Architecture

High-Performance 32-Bit RISC Processor

100% Non-Blocking

Architecture

Elements of ETERNITY MEX

MEX ULSB Switch

FCBC LTB

Input Supply for ULSB Switch

Built-In Battery Charger Circuit

Redundant SMPS

LED Indicators for Supply and

Battery Status

PCM-TDM Access Switch

IP Ready Platform

Modular Architecture

Compact Form-Factor

PBX to Field Terminations

BRI, E1/PRI, Analog Phones,

Magneto Junctions, CO, LD and

E&M Port Terminators

Five-Stage Protection Module

Modular Architecture Total = 12 Slots

Universal Slots = 08Fixed Slots = 4 (2 PS + 2 CPU)

Ruggedized LTB with5-Stage Protection

Interconnection

48V DCOperation

150-300V ACMDF/LTB

FCBC

MEX

ULSB Switch Front View

Buzzer

Headset/Handset Connectivity

MMI Interface

Keypad

VFD Display

ULSB Switch Rear ViewE1 over Fiber Optic

4 Data Ports for DTE/DCE

128-Pin LTB Connector

48V DC Supply

Fuse

FCBC

Redundancy for SMPS

FCBC Input:150-300 VAC Input

Battery Output : 48VDC

FCBC Output: 48VDC to ULSB Power Supply Card

Over Voltage and Reverse Voltage Protection

Micro-Controller Based FCBC

Front Rear

FCBC LED Indicators

Status Indication of Power Supply from AC Mains

Status Indication of Power Feed from Battery

Battery Output On/Off Indication

Absence of Battery Indication

Indication for Over and Under Voltage of Battery

Indication of Battery in Charging Mode

Indication of Battery in Float Mode

Battery Polarity Reversal Indication

Military-Grade LTB

Enclosed in Suitable Harness

Five-Stage Protection Module

Integrated Protection Against Lightning/Electrical Surges/Standing

Voltages for Each Port

Line Termination Box

Standard Configuration

Redundant CPU and Power Supply Cards

Subscriber Stations Capacity

Analog Phones 24

Magneto Phone Junctions 8

Analog Trunk Ports Capacity

Two Wire Central Office (CO) 8

E&M (2W/4W) 8

LD ( Loop Dial) 8

Digital Trunk Ports Capacity

E1 (Software Configurable for CAS, R2MFC, PRI and QSIG) 4

BRI U Interface 8

Interfaces

E&M InterfaceLD Interface

CO

E1 over Fiber

4-Port Ethernet

DTE

Magneto Phones

Analog Phones

E1 overCopper

CPU Card

Digital PCM-TDM Technology

High-Density Digital 1024X1024 Switching

Solid State Flash Memory (32MB)

Memory with High Reliability and Longer Data Retention Time

Voice Messages for Voice Guidance/Help and Greetings

On-board Conferencing Capability of 21 Parties

Redundancy

Hot-Swappable

Power Supply Card

44-57V (+20%) DC Operation

Over Voltage and Current Protection

Redundancy

Hot-Swappable

Interface Ports/Card

Analog Phones 6

Mangeto Phone Junctions 2

E&M Ports 2

Loop Dial (LD) Ports 2

2 Wire Central Office (CO) 2

Common Card for Following Ports:

Automatic Thermal Management on Subscriber and Tie Lines

On-Board Secondary Protection

Hot-Swappable

COMBO Card

8 BRI Ports/Card

BRI (2B + D) U Interface

Connectivity for ISDN Devices via NT1

Hot-Swappable

ISDN BRI Card

E1/PRI Termination Card with 2 PRI Ports/Card

Software Configurable for CAS, R2MFC, PRI and QSIG

Voice and Data Support

Full QSIG Feature Transparency as per ECMA, ETSI & ISO Standards

Copper Interface for E1 Termination

Direct Optical Interface for Monomode Fiber

Fiber Interface up to 20 Km on Monomode OFC

Hot-Swappable

E1FO Card

Integrated 4 Ethernet Ports on Single Card

Data Transfer and Control Applications

A Bifurcated E1 Stream can be Mapped to the Any Ethernet Port

Hot-Swappable

DATA Card

SLT16, and SLT24 Card

VoIP (IP Trunk + IP Extension)

GSM/3G (SIM)

CDMA (SIM)

VMS (Voice Mail Card)

VHF/UHF Radio Interface with PTT

Optional Interfaces and Cards

Features and Operational Specifications

The Operator Console Embeds:

The VFD Display

The Display Menu

The Navigation Keys

The Dial Pad

The Function Keys

Handset and Headset

Operator Console

The VFD Display

4x40 VFD (Vacuum Florescent Display) Display

Called/Calling Number and Name Display

Access Features Like Call Forward, Transfer, Phonebook and Others from the

Menu Displayed on the VFD

View Call Logs, System Activity and Fault Logs

Displays POST (Power-On self-test) and BITE (Built-In Test Equipment) Test Results

The Dial Pad

The Dial Pad is used for Dialing Internal/External Numbers, Dial Access

Codes and Name Characters Or While Programming the System

Consists of 12 Standard Dialing Keys

Numbers from 0-9

Characters “” and “#” and “A to Z”

Key Name Function

F1 to F5 Call Loop 1 to 5

NAME Dial By Name

FWD Call Forward

ACB Auto Call Back

RDL Redial

RING Ringer

CONF Conference

FREL Forced Release

ANS Call Answer

HOLD Call Hold

XFR Call Transfer

REL Call Release

Direct Access Function Keys

The Handset and Headset

Ruggedized Handset with MIL Standard Connector

Headset Connectivity for Hands-Free Operation

Common Interface is Provided for Headset and Headset, Either of One

Can be Connected at an Instant

Alarm To Set/Cancel Alarms

Call Cost Display To View Cost of Calls Made

Call Forward To Set/Cancel Call Forward

Call Logs To View History of Answered, Missed and Dialed Calls

Contacts To Call, Add, Edit, Delete Names and Numbers from the Directory

Change User Password To Alter the Password

Do-Not-Disturb (DND) To Set (Blocking Incoming Calls)/Cancel DND

Dynamic Lock To Change Toll Control Level for Making Calls

Keypad Lock To Lock/Unlock the Keypad

Phone Settings To Change Settings of Volume, Ringer, Display Menu and Others

User Status To Set User Status to Present or Absent

Following Features Can be Accessed from the Display Menu:

Display Menu

Reliability

Continuous Operation on 24 Hour Basis

No Overheating or Breakdowns

Distributed Processing Architecture with Intelligent Local Processing

Units for Each Card

Integrated DSP based SLIC and DAA are used for Analog Subscriber

and Trunk Interfaces

Best-of-Breed Software Protocol Stacks are used for Digital Interfaces

Redundancy for Critical Cards (PSU and CPU)

MTBF better than 5000 Working Hours

MTTR better than 30 Minutes

Ruggedization

Equipped with Necessary Ruggedization for Tactical Military

Environments

Leak Proof Electrical Connectors

Toughened Connectors and LTB

Efficient Thermal Management on Subscriber and Tie Lines

No Moving Parts

Cards are Secured to Slots Avoiding Dislocation During Moves

Transportability

Light-Weight Switch for Easy Transit

Weight of Equipment (Less Accessories) Equals 20 Kgs

Accessories:

Handles on Equipment for Easy Movement

Man-Pack Harness

Transit Case for Easy Transportation

Man-Pack Harness

Man-Pack Harnesses for Easy Carriage During Commutation

Harness for:

ULSB Switch

FCBC

LTB Unit

Laptop

Headset and Handset

LTB, MMI, Power Supply, Earthing, Testing and Other Connecting Cables

Earthing, Tool and Optical Kit

Vehicle Mounting Kit

Testing Telephones

Transit Case

Transit Cases for Easy Movement and Packaging

The Cases Encompasses:

ULSB Switch

FCBC

LTB Unit

Laptop

Headset and Handset

LTB, MMI, Power Supply, Earthing and Other Connecting Cables

Earthing, Tool and Optical Kit

Vehicle Mounting Kit

Testing Telephones

Vehicle Mounting Kit (VMK)

Vehicle Mounting Kit for ULSB Switch

Vehicle Mounting Kit for FCBC

Environmental Specifications

Impervious Performance under Varying Climatic ConditionsParameters Range

Operating Temperature -20 .C to + 55 . C

Operating Humidity 5-95 % RH, Non-Condensing

Storage Temperature -40 . C to +85 . C (-40. F to +185. F)

Storage Humidity 0-95 % RH, Non-Condensing

Earthing

Matrix MEX can Work on Field Type of Earthing (up to 5 ohm)

Earthing Points on Main Switch, FCBC and LTB

Earthing Spikes are Provided with Other Accessories (Earthing Rods,

Cables and Braids)

Earthing Rods

Earthing Braid

Camouflage

Color Scheme Inline to Provide Proper Concealment

ULSB Switch, FCBC, LTB, Transit Cases and Harnesses

– “All in Camouflage”

Management and Maintenance

Ruggedized MMI/NMS Terminal

Local as well as Remote Management

Configuration through Operator Console

Visual Indications for Health Status of Cards

Remote Configuration via Dial-Up Modem

Web based Graphical User Interface

Access Levels Secured with Passwords

Configuration and Management

MMI Interface

MIL Standard MMI Interface on the Front Fascia

EMI Protected Cable with a Sealed Connector on One End and Industrial

Connector to for Laptop

Access GUI

Capture and Download Station Message Detail Records (SMDR)

Capture and Download System Activity and Fault Logs.

Download Call Statistics Reports

Power on Self Test, On-Line and Off-Line Diagnostics

BITE (Built-in Test Equipment) Testing for Self Diagnostic of Various Ports

Like SLT, Magneto, CO(TWT), E&M and LD

Card Level System Diagnostics through MMI/NMS

Visual/Aural Alarm Indicating Critical Failure

System Diagnosis

Test Proper Functioning of Various Trunk and Extension Ports:

SLT, Magneto, CO, Loop Dial, E&M and E1

Proper Functioning of a Port is Tested by Looping Back the Port with the Opposite

Gender Port

BITE Results are Recorded in the System Activity Log

BITE Test

System and Traffic Statistics

Per Port/Trunk Occupation Reports with Time and Duration

Built-in SMDR for 12000 Records

System Event and Fault Logs

Modular Construction to Facilitate Individual Replacement of Faulty Cards

Comprehensive Literature Conforming to JSS 0251-01 Standards

Maintenance and Repairs

Key Differentiators

A Perfect Blend of Innovation, Intelligence and Integration

Flexible and Scalable Communication Platform

Rich Features and Functions

Flexible Call Management

Easy Installation and Setup

Comprehensive Monitoring and Management Reports

Key Differentiators

Redundancy for Critical Cards

Hot-Swappable Cards

CNR Functionality through E&M ports

Built-in SMDR/CDR of 12,000 Call Records

On-board Conferencing Capability of 21 Parties

On-board Secondary Protection

Key Differentiators

LTB with 5-Stage Protection

Self-Diagnostic Tests

System Fault and Event Logs

Watch Dog Functionality

Minimum Internal Cabling

All Aluminum Enclosure

Key Differentiators

Type of Presentation: Product Introduction and Features Number of Slides: 51 Revised On: 29th September, 2011 Version-Release Number: V1R1

For Further Information Please Contact:

Email ID: pmt@matrixcomsec.com

Mobile: +91 9662544401

Visit us at www.matrixcomsec.com

Thank Youwww.MatrixComSec.com