Embed Size (px)
Citation preview
Martindale Abrasion and Pilling Tester for Industrial Use
Martindale Abrasion & Pilling Tester is used for checking the abrasion
besides pilling resistance of fabrics. SKZ Industrial provides you the
high-quality Martindale Abrasion and Pilling Tester that is calibrated
& available at affordable price. It consists of 4 testing plates where the
grazing fabrics is attached, these 4-testing table are well mounted on
base plate of this instrument. There’s revolving plate that revolves with
the help of 3 cranks, motor and pegs.
There are 4 sleeves attached on revolving plates. The holders for the
abrasion and pilling testing are offered with the instrument. There’s a set
of weights for the proper pressure on test specimens. The templates for
the cutting of samples and abrading cloth as well as their mallet are also
provided as the standard accessory.
Some of the salient features of Martindale Abrasion and Pilling
Tester are-
Operative speed ratio of the outer pegs towards inner pegs
Four specimen can be examined at the same time.
Maximum load it can hold is 790g (corresponding to the pressure
of 12KN/m2)
Include stainless-steel balls.
Top Plate made of Acrylic for safety
Easy reset counter
Excellent testing performance
Synchronous motor speed
Longer service life
Suitable for all kind of fabrics
The measurement procedure is unavoidably generate scan &
reports that can be printed
The technical Specification of Martindale Abrasion and Pilling Tester
comprise of
No. of heads – 4
Working pressure on the test specimen – 3 KPA, 6KPA, 9KPA &
12 KPA (4 numbers each)
Exposed test specimen area – 6.45 cm2
Maximum pressure available – 12 KPA (790 grams)
Drive speed ratio of inner and outer peg – 32:34
Contact Us
Tel: 0086-15692312640 /13791019917
Fax: 0531-82731861
Email: [email protected]
Add:D-11,NO.9 Lanxiang
RD.,Tianqiao,Jinan,Shandong,China.
