3
How to J ump S tart a C ar? We’ve all gone through it. Some may never admit it. But we’ve all been stranded with a dead battery at some time or the other. Jump S tart a C ar is easy enough. Done improperly, it can have disastrous consequences. Steps for jump starting your car: Park both cars facing each other and close by. Be absolutely sure that they do not touch each other. Open their bonnets and locate both batteries and the necessary leads. Make sure the cables are completely unwound and then, attach the leads in the following order. First, attach a red lead to the positive terminal of the dead battery. Then, attach the other red lead to the live battery. Attach one black lead to the negative lead of the live battery and the other black lead to a grounded metal piece. A grounded metal piece of the B attery J ump S tarter can be any piece not in the engine compartment that isn’t painted or has oil on it. Ensure all connections are properly made. Start the engine of the live car. Keep the car running for 30-60 seconds. Start the engine of the dead car. If that does not work, try the same procedure again (for a longer

How to jump start a car newnow.com

Embed Size (px)

Citation preview

Page 1: How to jump start a car newnow.com

How to Jump Start a Car?

We’ve all gone through it. Some may never admit it. But we’ve all been stranded with a dead

battery at some time or the other. Jump S tart a C ar is easy enough. Done improperly, it can have

disastrous consequences.

Steps for jump starting your car:

Park both cars facing each other and close by. Be absolutely sure that they do not touch each other.

Open their bonnets and locate both batteries and the necessary leads.

Make sure the cables are completely unwound and then, attach the leads in the following order.

First, attach a red lead to the positive terminal of the dead battery. Then, attach the other red lead

to the live battery. Attach one black lead to the negative lead of the live battery and the other black

lead to a grounded metal piece.

A grounded metal piece of the B attery J ump S tarter can be any piece not in the engine

compartment that isn’t painted or has oil on it.

Ensure all connections are properly made.

Start the engine of the live car.

Keep the car running for 30-60 seconds.

Start the engine of the dead car.

If that does not work, try the same procedure again (for a longer time this time).

If it does not work, the battery is dead altogether and needs to be replaced. Call in the

professionals.

Remove the leads in the exact opposite order. Black lead from ground, black lead from live

battery, red lead from live battery, red lead from dead battery.

Keep the engine running for at least 30 mins thereafter to recharge the battery.

MOST IMPORTANT: Do not forget to thank the nice people who took the time to come to your

Page 2: How to jump start a car newnow.com

aid!

J ump S tart B attery Precautions:

The process seems easy enough, but here are some precautions you should before and during the

procedure:

Ensure the problem is a discharged battery. If it’s discharged the headlights or dashboard lights

should be working but dimly.

Check that the live battery you’re using is of the same or higher rating than the dead battery.

Do not let any of the leads dangle in the engine compartment where they could come into contact

with the moving parts.

DO NOT let any of the leads touch each other.

Wear protective gear if available and try and stay at a distance from the whole set-up as much as

possible.

Don’t leave the ignition, stereo, A/C, headlights, or any other device on in either of the cars.

Ensure there’s no damage or leaks in the J ump S tarter P ack battery. If there is, call help

immediately and do not try to jump start the car.

NewNow® Product info about J ump S tarter , please go to http://www.newnow.com/