Click here to load reader
Upload
tesla-cad-solutions
View
17
Download
1
Embed Size (px)
Citation preview
How to control the selection of elements in Revit?
The requirement of controlling element selection is felt throughout the design development
process by AEC professionals, as only necessary elements can be chosen for performing specific
design activities. For example, when it comes to interference detection in Revit, design and
construction professionals have to select the specific elements of the linked file for checking
them against the elements of the host file, in such cases specific tools have to be utilized by Revit
users.
Use following options for controlling the selection of elements in Revit
For accessing important options meant for controlling element selection in Revit, users
are required to go to Modify tab and click Select option for enlarging drop-down menu.
Within the drop-down menu various options are available for the selections of elements
in Revit such as Select link, Select underlay element, Select pinned elements, Select
element by face and Drag elements on selection.
So when it comes to the selection of linked files and their specific elements, design and
construction professionals have to utilize Select link option.
In any Revit project, linked files may include CAD files, Revit models and point clouds.
So if anyone of the above mentioned file is linked in a current Revit project, users are
required to optimize Select link option for selecting their elements.
For selecting the entire linked file users are required to put the cursor over the link and
then click it when it is effectively highlighted.
On the other hand when it comes to the selection of specific elements of the linked file
users are required to move the cursor above the element and after which they should
press TAB for highlighting it. Once the element is highlighted users can click it for
selecting it.
Whereas when Revit users want to select the elements which are incorporated in an
underlay, they are required to use Select Underlay Elements option that is available in the
drop-down menu.
If in case Revit users are looking forward to select pinned elements which cannot be
moved by users from their place, they are required to use Select Pinned Elements option
from the drop-down menu.
When it comes to dragging an element without its selection, Drag Elements on Selection
option should be used.
In this way element selection can be easily controlled by Revit users.