Upload
finpro
View
209
Download
2
Embed Size (px)
Citation preview
FINNISH WASTE-TO-ENERGY AND BIOENERGYOFFERING
2
• Decades of experience with woody biomass, forest industry side streams and agro waste
• Full range of services and technologies in bioenergy sector for heating and energy supply
• World-class equipment and systems that radically increase the efficiency of supplying the raw material without risking the sustainability aspects
• Best solutions for both large-scale and small-scale, decentralized units
SOLUTIONS FOR THE WHOLE VALUE CHAIN FROM FOREST TO ENERGY END-USER
WHAT FINLAND OFFERS TO YOU
3
• Expertise in efficient waste collection, transportation and storage
• Outstanding technology for refining waste into valuable products e.g. alternative fuels
• Solutions for recycling, sorting and management of all kind of waste materials substantially reducing the amount of waste being landfilled
• Turn-key solutions for W2E plants
SUPREME OFFERING FOR MUNICIPAL SOLID WASTE MANAGEMENT AND PROCESSING
WHAT FINLAND OFFERS TO YOU
4
WHAT FINLAND OFFERS TO YOU
• Finland has a long experience in forest industry and a strong machinery cluster
• Boilers ranging from small to large scale, including Fluidized bed boilers (FBB) and Bubbling fluidized bed boilers (BFB)
• Leading combustion and gasification technologies
• Off-grid solutions
#1FINLAND IS WORLD
IN COMBINED HEAT AND POWER (CHP) TECHNOLOGY
5
WHAT FINLAND OFFERS TO YOU
CIRCULAR ECONOMY – LEADING EXPERTISE IN WASTE MINIMIZING, RAW MATERIAL REUSE AND RECYCLING, ENERGY RECOVERY AND FINAL DISPOSAL
• Globally, 90% of raw materials used end up as waste
• In Finland, nearly 90% of municipal waste was recovered either turning it into energy or by means of material recycling (2015)
• Only 10% of municipal waste end up in landfills and the amount is decreasing since landfilling organic waste and textiles became prohibited as of 2016
• New waste refinery and biorefinery concepts developed and already in operation in Finland
6
• In-depth understanding of turning demanding raw materials like saw dust, wastewater sludge, nitrogen rich manure and slaughterhouse waste into liquid and gaseous biofuels
• “Open access” pilots and demonstration platforms for biogas and liquid biofuels
• Fully automated and controlled process operations with 24h technical support
• Tailored solutions for different climates and customer needs
WHAT FINLAND OFFERS TO YOU
ADVANCED BIOFUELS – ETHANOL, DIESEL AND BIOGAS FROM WASTE
FEEDSTOCK PROCESSING
7
WASTE AND BIOMASS PROCESSING
SMART FORESTRY AND HARVESTING
ENERGY GENERATION
WASTE TO ENERGY PLANTS
BIOENERGY PLANTS
BIOFUEL PRODUCTION
BIOGAS PRODUCTION
LIQUIDBIOFUEL PRODUCTION
FINNISH OFFERING PACKAGES
8
FEEDSTOCK PROCESSING IN A CHANGING WORLD
FEEDSTOCK TRENDS
The most typical feedstock are MUNICIPAL SOLID WASTE (MSW) HAZARDOUS WASTE, INDUSTRIAL WASTE (Food & beverage), FOREST-BASED BIOMASS, AGRO WASTE and WASTEWATER SLUDGE
2 BUT ONLY
GLOBALLY THE ANNUAL VOLUME OF MUNICIPAL SOLID WASTE is estimated to stand at
BILLION TONS,
OF THE WASTE GOES TO WASTE-TO-ENERGY PROCESS 4%
FORESTS ARE A PRODUCTIVE AND SUSTAINABLE SOURCE OF HIGH QUALITY BIOMASS. Annual forest use in finland is
Room for additional use due to SUSTAINABLE SMART FORESTRY PRACTICES
60 MILLION m3
10
FEEDSTOCK PROCESSING; FINNISH OFFERING
BMH Technology Oy specializes in turnkey deliveries of SRF (Solid Recovered Fuel) production plants and solid fuel handling systems for power plants and cement kilns.
The company offers solutions which transform the solid waste streams to high-quality fuel and valuable recyclables.
11
BMH TECHNOLOGY
WORLD-CLASS MATERIAL HANDLING TECHNOLOGY
12
BMH TECHNOLOGY
WORLD-CLASS MATERIAL HANDLING TECHNOLOGY
• Low CO2 emissions
• Thanks to stable combustion, no dioxin is produced
• Reduce usage of traditional fossil fuels, such as coal, gas, oil, etc.
• Increase electricity efficiency
• Recycle metal and other valuable substance
13
CROSS WRAP OY
LEADING WASTE INDUSTRY SOLUTIONS FROM THE LEADING MANUFACTURER
A bale is an efficient way to handle, store and transport waste – and if you so choose, to reuse it i.e. as a source of energy. Wrapped bales are environmentally friendly, effective and economical. What’s more, the automatic opening and dewiring can substantially improve production efficiency.
14
CROSS WRAP OY
LEADING WASTE INDUSTRY SOLUTIONS FROM THE LEADING MANUFACTURER
Cross Wrap builds and installs automatic stretch-film bale wrappers to pack various waste materials and recyclables for transport and storage.
The product range also includes bale openers and de-wiring machines that open up the bales when materials need to be utilized.
The original cross wrapping method is patented globally and other patents for new innovations have followed.
CROSS WRAP OY’S unmatched experience, combined with its leading-edge patented technologies, means that it can deliver an Effective, economical and environmentally friendly wrapping solution for every waste management challenge.
The customer needs only a baler, wrapping line and film – all provided by Cross Wrap and its partners
20 years – 400 machines – 50 countries
15
DUSTCOMB
ENGINEERING AND CONSULTING RELATED TO PROCESSING AND REFINING OF FUEL WOOD
DUSTCOMB offers engineering and consulting related to processing and refining of fuel wood. Solutions include crushing, drying, screening, grinding, etc.
DUSTCOMB’s solutions ensure maximum fuel efficiency, lower fuel consumption, reduced emissions, improved power plant operation reliability and increased storability of the biofuel.
16
DUSTCOMB
ENGINEERING AND CONSULTING RELATED TO PROCESSING AND REFINING OF FUEL WOOD
• Increase the usability of forest residues for energy generation.
• Replace fossil fuels with refined biomass.
• Improve handling and logistic chains for fuel wood.
17
ECOMOND
TCOS – TASK CONTROL AND OPTIMIZATION SOFTWARE
ECOMOND is a software company specialized in electronic task management and optimization software TCOS – Logistics ControlTCOS is a modern non-industry specific solution for managing operations in various businesses from waste management to healthcare and from services to logistics. The solution is made for handling the whole task management chain with large number of transactions and can be integrated to almost any other software like financial, ERP, HR etc.
BENEFITS• 10-30% savings in the operational costs• Improved customer service and remarkable reduction in manual work• 80-90% less time in planning needed and hugely improved reaction rate
into changes• 100% transparent and optimal operations • Typical pay back time 3-6 months
18
ECOMOND
THE PROJECT
REFERENCES Waste management companies and cities:L&T, SITA FINLAND, RENONORDEN, RENOVA (City of Gothenburg) SEVERAL MUNICIPAL COMPANIES
Service companies in different branchesANTICIMEX, LINDSTRÖM, INNOGAS
Logistics in different branchesLATVIAN STATE FOREST, BIOENERGY PROJECTS, PALPA
19
EKOKEM
COMPREHENSIVE ENVIRONMENTAL MANAGEMENT SERVICES
EKOKEM provides treatment of contaminated soils, construction of landfills and waste treatment solutions
ENVIRONMENTAL CONSTRUCTION BUSINESS
• Soil remediation services
• Landfill construction• Utilization solutions for
industrial by-products• Remediation and
reception of contaminated soil
• Demolition operations• Basin construction
ENVIRONMENTAL AND WASTE MANAGEMENT
• Waste recovery and treatment solutions
• Expert services and waste surveys
• Environmental products and equipment
• Treatment of waste originating from commerce and construction to enable
ENERGY AND WATER
• Wholesale of district heating and electricity
• Decentralized energy production solutions
• Groundwater remediation services
• Waste water management solutions
EKOKEM’SBUSINESS AREAS ARE:
TREATMENT CENTRES
• Treatment and recovery of ashes
• Treatment and recoveryof contaminated soil
• Refining construction waste• Refining energy waste • Treatment of the sludge
and water received• Treatment and final
disposal of industrial waste• Manufacturing of recycled
oil products
• Employees 245 • Revenue 114,9
million euros
20
FARMI FOREST
FARMI FOREST, a global pioneer since 1962 in developing value adding innovative forestry machinery and biomass processing solutions and services. We drive for quality, productivity, safety and customer orientation.
FARMI Profi and Smart product lines provide productive and sustainable full forestry management solutions around farming tractor both for semi commercial and professional customers.
Our partners in over 40 countries support our customers finding the right solutions whether you are working on energy wood harvesting or producing biomass wood chip.
Farmi Forest, part of Normet Group is located in the heart of woodlands of Iisalmi, Finland.
farmiforest.fi
21
FERROPLAN OY
FERROPLAN OY produces waste treatment solutions for recycling, sorting, and managing of a wide variety of materials.
• Efficient waste management solutions with 33 years of experience
• Conveyor solutions designed for handling piece goods and bulk cargo
• Solid waste treatment• Water and waste water
treatment, all in one package
• Waste to landfill reduced to a third
• Efficient, reliable, and safe
• Automate and optimise the flow of materials or semi-manufactured products at the customer's site, helping to ensure uninterrupted production
22
FERROPLAN OY
REFERENCES, ONGOING PROJECTS
• BIWASE, Vietnam, composting plant, municipal waste 420 t/d
• VIMELCO, Vietnam, constructing waste treatment line, municipal waste line
• NASTOLA, Finland, water treatment plant renovation
• Andritz, municipal waste treatment line
23
INDUFOR OY
INDUFOR GROUP is one of the world's leading forest consulting service providers. It provides high-quality knowledge and services for its clients over the forest and forest industry value chains.
Related to W2E and bioenergy Indufor offers services considering biomass sourcing, investment feasibility as well as new solutions and markets
CONSULTING FOR THE FOREST INDUSTRY VALUE CHAIN
24
INDUFOR OY
INDUFOR OFFERS
• Biomass sourcing• Feasibility studies• Help in partner search
(raw materials, technology, etc.)• Help in finding new solutions and
new markets (investment and resource needs, technologies, markets, policy environment)
REFERENCES, ONGOING PROJECTS
• Biomass sourcing, pre-feasibility and feasibility studies for CHP-plants in various African countries (e.g. South Africa, Zimbabwe and Ghana)
• Regional biomass supply and price forecasting for a 50MW biomass power plant in North Asia
• EBRD study on transforming wood into biofuels in Russia
25
INMEC INSTRUMENTS
SAMPLE PREPARATION SOLUTIONS FOR LABORATORY ANALYSIS
26
INMEC INSTRUMENTS
SAMPLE PREPARATION SOLUTIONS FOR LABORATORY ANALYSIS
We offer various
models for different
uses
Obtaining reliable measurements from test samples is rife
with challenges that are not catered to
with available industry solutions
Inmec Instruments Ltd Lukkarinpolku
3a 87200 Kajaani
+358 400 280 202
www.inmec.fi
27
LHM HAKKURI
LHM HAKKURI offers state of the art chipping technology
Features of The LHM Giant Mobile Drum Chipper • Powerful throwers (patented technology)• Remote surveillance• Remote programmable & controllable CAN technology• Fast spare-parts delivery• Low life cycle cost (LCC)• High capacity up to 300 l-m3/hour of wood fuel chips
http://www.lhmhakkuri.com/
28
MHG SYSTEMS OY LTD
MODERN IT SOLUTIONS FOR FORESTRY
KEY CONCEPT• Platform for forestry stakeholders• woodlandmanager.com
CUSTOMER BENEFITS• New business opportunities• Modern tools for work management• Networking with partners and other
stakeholders
WHAT CAN WE OFFER FOR THE TARGET COUNTRY/INDUSTRY SECTOR?
• New innovative way to connect forest owners and forestry entrepreneurs
• Bring more wood for the industry
• Raise awareness of forest owners about the possibilities of their forests
29
MHG SYSTEMS OY LTD
MODERN IT SOLUTIONS FOR FORESTRY
REFERENCES, ONGOING PROJECT
• Mobile work management solution used by the biggest forest management associations in Finland
• Mobile field data collection tools in use in multiple developing countries
• Dozens of customers in Finland taking advantage of our ERP solution
30
MIKSEI LTD
We offer green, forest based energy solutions for heat and power supply for every customer need
We offer tailored energy supply services to all kinds of clients from private homes to metropolises. From forest to a warm house: we provide you with complete set of services and technologies whatever your energy needs are.
CUSTOMER BENEFITS• Replace coal as raw material for energy
supply! • Reduction of CO2
• Cost efficient
WORLD CLASS SOLUTIONWe offer full range of services and technologies in bioenergy sector
SECURE SUPPLIEROur technology is in use in hard weather conditions (yearly variaton 50-70 C degrees)
MARKET LEADERFinland is known for its strong know-how in bioenergy technology
WHY CHOOSE US
CLEANTECH FINLAND BIOENERGY – CFB
31
MOLOK OY
YOUR PARTNER IN WASTE COLLECTION
MOLOK Oy is a company manufacturing, marketing and selling Molok® semi-underground DEEP COLLECTION® waste containers.
Leading manufacturer in the world 140 000 installed waste containers in more than 40 countries
32
INNOVATIVE MOLOK ® DEEP COLLECTION® SYSTEM
THE BENEFITS ARE:• Huge underground collection capacity• Vertical design compacts waste• Long emptying intervals• High collecting efficiency• Low emissions
MOLOK OY
33
RAUMASTER
GLOBAL LEADER IN MATERIAL HANDLING SYSTEMS
SOLID FUEL AND BIOMASS HANDLING• Fuel receiving, screening, crushing, storage,
reclaiming & conveying systems• Fuel feeding and ash handling systems• Recovery boiler, lime kiln and smelting plant
conveyor systems
WOOD HANDLING• Wood rooms, chip and bark storage,
screening, receiving and conveying• EPC projects
SERVICE• Retrofits, service audits, field services,
maintenance, repairs, overhauls
raumaster.fi
34
RAUMASTER
CUSTOMER BENEFITS• Low maintenance cost, high availability, reliability and
efficiency • Proven technology and experience from handling different
types of materials
EXAMPLES OF OVER 3300 REFERENCE PROJECTS• Wood, chip and bark handling
EPC Altri Group Celtejo Pulp Mill, Portugal • Chip and bark handling
Arauco Nueva Aldea Mill, Chile• Wood room
Ilim Group Bratsk Mill, Russia• Bio fuel, RDF, TDF and sludge receiving, feeding and ash handling
systems Sumitomo Heavy Industries, Nippon Pulp and Paper Asahikawa Mill, Japan
• Coal, biofuel, bottom ash, sand, limestone handling systems for 4 boilersAmec Foster Wheeler Energia, Korea Southern Power, Samcheok, South Korea
• Fuel yard, biofuel and coal receiving, screening, crushing andfeeding systems ash conveying systemsFortum Värme, Värtaverket, Stockholm, Sweden
35
SAALASTI
MANUFACTURER OF INNOVATIVE HEAVY-DUTY BIOENERGY MACHINERY
• Machines are used mostly in big power plants and wood rooms
• Main products are different types of stationary forest-based biomass chippers, crushers, cutters and bark dewatering presses. The company delivers entire biomass processing stations.
• SAALASTI CHIPPER H (horizontal feed) is suitable for power plants, biomass terminals and other high-volume applications where correct particle size and reliable operation are a necessity
36
SAALASTI
MANUFACTURER OF INNOVATIVE HEAVY-DUTY BIOENERGY MACHINERY
• SAALASTI CRUSH H is designed for effective crushing of stumps and other forest residues. It is a high-capacity crusher for processing stumps, while being versatile to be used to process any other wood based biomass.
• SAALASTI CRUSH V is a real universal crusher, which has become an industry standard in many countries. It is used at paper and pulp mill woodrooms, sawmills and power plants.
www.saalasti.fi
37
SIMOSOL
RAW MATERIAL SOURCING ANALYSIS FOR BIOENERGY & FOREST INDUSTRY INVESTMENTS
• Raw material sourcing analysis for bioenergy & forest industry investments
• Full pre-feasibility analysis of bioenergy plant investments with partners
• Feedstock supply chain and forest management optimization software
• Valuation of forest assets
CUSTOMER BENEFITS• Better investment decisions based on quantitative
analysis• Maximized profit through minimized operational
costs and optimization
38
REFERENCES, ONGOING PROJECTS• Biomass Atlas Pakistan and Vietnam; World Bank funded
ESMAP project – Nationwide mapping of biomass resources and availability for industrial scale power generation
• Optimized long term wood sourcing plan for Metsä Forest Podporozhye, Russia – Minimizing wood sourcing cost at terminals/saw mill taking into account road building investments, harvesting and transport. Included remote sensing based mapping of forest resources.
• Optimized wood chip delivery chain; Finland – maximizing the profit of weekly chip deliveries to power plants taking into account the operational costs and the energy content development in the wood chips
WHAT CAN WE OFFER FOR THE TARGET COUNTRY/INDUSTRY SECTOR?• National / regional analysis of biomass resources and
their sustainable utilization• Analysis services and operational tools to minimize
operational costs / maximize profit
SIMOSOL
39
BIOMASS AND WASTE
ENERGY GENERATION FROM
40
GLOBAL MARKET SIZE FOR WASTE TO ENERGY AND BIOENERGY IN 2016 IS ESTIMATED TO BE
46 bn USD WHILE IN 2020 THE MARKET SIZE IS INCREASED TO
85 bn USD (Frost & Sullivan)
ENERGY GENERATION: TRENDS
30%OF FINNISH ENERGY CONSUMPTION IS BASED ON WOODY BIOMASS AND PEAT
45%MORE ENERGY BY 2030
AS THE WORLD'S POPULATION KEEPS GROWING, WE WILL NEED
14%OF GLOBAL ENERGY CONSUMPTION
TODAY BIOMASS REPRESENTS AROUND
41
ENERGY GENERATION: FINNISH OFFERING
Ekokem Oyj
ARITERM OY
FOR A SUSTAINABLE FUTURE
ARITERM IS A FINNISH MANUFACTURER OF BIOHEATING SYSTEMS
Our main products are bio boilers used for heat production, bio burners and bio heating system solutions.
Modern bio heating is an easy and affordable way to take care of heating. The bio heating solutions developed and manufactured by Ariterm Oy provide an ef
ficient and reliable way of benefiting from different kind of bio fuels.
RECYCLING SOLUTIONS
Ariterm is specializing on recycled wood combustion systems, and technology is feasible to combust recycled wood with metallic impurities and biofuels with
low ash melting temperature with Multijet – combustion technology.
[email protected]+358 400 541 721
www.ariterm.fi
ARITERM OY
CAREFUL PLANNING LEADS TO GOOD RESULTS
ARITERM BIOJET MULTI
BIO BURNER FOR DEMANDING HEATING SYSTEMS FOR WOOD PELLETS
• Combines best features of bio burners: water-cooled structure and moving grate technology
• Extended cleaning intervals• High efficiency (over 95 %)• Automatic ignition
ARITERM BIO BOILERS
ECONOMICAL CENTRAL HEATING BOILER
Cleanly and efficiently burning bio burner needs to be paired with a boiler that is able to transfer produced heat to the boiler water with high efficiency. Ariterm Bio boilers are available in several power classes.
• Nominal output 120 – 3 000 kW • Compatible with Ariterm’s bio burners • Max. working pressure 4 - 10 bar • Can be equipped with a domestic hot water heat exchanger • The boiler has the necessary hatches for cleaning and fire
maintenance. • Insulated steel ash chamber • Ash screws
[email protected]+358 400 541 721
www.ariterm.fi
ARITERM MULTIJET
BIO BURNER FOR DEMANDING HEATING SYSTEMS
• 100 % self cleaning grade structure, designed for recycled wood combustion.
• Capable to handle metals with low melting point (Aluminium, Brass)
• Feasible for biofuels with low ash melting point
44
AURELIA TURBINES OY
THE MOST EFFICIENT SMALL GAS TURBINES IN THE WORLD
40%
AURELIA TURBINES PROVIDES ROBUST, WORLD-CLASS GAS TURBINES WITH ELECTRICAL OUTPUT OF 400 KW AND SUPERIOR ELECTRICAL EFFICIENCY OF ABOVE
CUSTOMER BENEFITS
Outstanding power-to-steam ratioSME industrial sites with steam and power needs can benefit from the highly efficient CHP enabled by the gas turbine combined with a heat recovery boiler providing steam. Such installation can lower the primary energy need by some 40%.
Excellent fuel flexibilityThe turbines are built for multiple applications such as CHP, steam process, O&G, and can utilize a wide range of both, renewable and non-standard fuels.
INEXPENSIVE, EMISSION FREE ENERGY EFFICIENTLY FROM SOLID BIOMASS
BIOFIRE OY
Wood chips
Peat
Pellets
Waste grain
INPUT
More than 30 years of experience in biomass burning and heating plant business. This ensures the best technical know-how is used to Biofire Oy products and services supplied
Biofire Oy manufactures and supplies highly robust and long-lasting heating systems and heating plants which use solid biomass as fuel. Its Palokärki –products are designed for demanding North European conditions
Fully automated heating systems and heating plants in categories from 60 kW up to 5 MW
OUTPUT
Hot water for heating or for steam generating
Hot air for heating or drying
60 kW - 5 MW
100 kW - 3,2 MW
BIOFIRE OY
BIOFIRE TECHNOLOGY AND PRODUCTS ARE SUITABLE FOR MANY PURPOSES
For grain drying 100 – 1600 kW For timber drying 500 – 5000 kW For district heating 500 – 5000 kW
Heating containers 60 – 700 kW
For farmers / small industry 60 – 500 kW
Smart technical solutions for fuel handling
For industrial / commercial heating purposes 500 - 5000 kW
For private / industrial heating purposes 60 - 500 kW
47
CITEC OY AB
MULTI-DISCIPLINE ENGINEERING AND INFORMATION MANAGEMENT SERVICES
Citec provides multi-discipline engineering and information management services to the energy industry and other technology-dependent industries. It helps its customers to deliver sustainable solutions that supply the society with the energy it needs.
CUSTOMER BENEFITS
• CITEC offers complete services and consulting within all project phases: feasibility, concept studies and pre-engineering, basic and detailed engineering as well as site services, built drawings and technical documentation.
• The services range from single discipline engineering to EPCM services for managing the whole project, or specific parts of it.
• Global resourcing enables Citec to to select the best resources from different countries both in terms of competence and cost efficiency.
• Global track-record, capability and references to back up.
48
CITEC OY AB
MULTI-DISCIPLINE ENGINEERING AND INFORMATION MANAGEMENT SERVICES
REFERENCES, ONGOING PROJECTS
• KEA waste to energy plant, Klemetsrud, Norway
• ALSTOM, BIOMASS-FUELLED CHP PLANT, France
• WESTENERGY PLANT, Mustasaari, Finland
• VANTAAN ENERGIA waste to energy plant, Vantaa, Finland
CITEC provides complete engineering and information management services for waste to energy projects as well as services for EPC contractors, utilities (power and heat producers), plant owners and power developers.
The services are provided for power production, district heating & cooling and for CHP generation.
49
EERA WASTE REFINING
WASTE TO ENERGY UTILITY BUSINESS
EERA WASTE REFINING concept includes three major innovations:
The Bridgehead Model, which secures systemic demand and supply as well as builds cooperation in targetcountries
A potential dominant design in waste management
An advanced operations and maintenance model
A serial utility business with a high growth potential by establishing, running and trading (BOOT) Waste-to-Energy facilities mainly outside OECD.
REFERENCES
The first NEWCO is ARAFIN in Oman serving GCC, Iran and North Africa and the first deal is closed in Oman.
A Chilean company EWR Chile has been founded with four projects under development. Turkey and Iran are developing fast with several projects under development.
50
THREE PARALLEL ROUTES TO UTILIZING WASTE BASED FUEL ‘SRF’Our offering provides three ways to convert the energy content of waste into a useful form and usage
Existing gas or coal fired power
plant
Gasifier for fuel
conversion
Waste refining facility
Cement factory
Power plant based on a
fluidized bed boiler
Pat.pend solution for enhanced oil
produciton Electricity grid
Industrial processes
CoolingWater desalination
Municipal waste
Industrial waste streams
For recycling:metals, glass
Non-usable to landfill (max 20 % of the input
Customer interface
Solid Recovered Fuel (SRF)
SRF
SRF
Electricity & steam
Gas
Case a) SRF
Case b) WtG
Case c) WtEl&S
EERA WASTE REFINING
51
EFIREC OY
EFFICIENT RENEWABLE ENERGY SERVICES AND SOLUTIONS
• We provide renewable energy and energy efficiency services and solutions.
• Our solutions provide economic and ecological energy from a local source, district heating (300 kW - 10 000 kW) as well as electrical energy for larger buildings and industry.
• We have also waste heat energy and district cooling solutions and waste treatment in our portfolio.
• We have been one of the pioneers in waste treatment plants as a builder, so we have a comprehensive know-how in this industry.
52
EFIREC OY
EFFICIENT RENEWABLE ENERGY SERVICES AND SOLUTIONS
• Our annual efficiency is of the highest class and our plants have a wide operating range.
• This reduces the costs significantly: with the same amount of fuel we can provide more heat energy than our competitors.
• Our power plants are highly automated.
• The modular method of construction ensures consistently high quality and fast and cost-efficient deliveries.
• Installation phase is extremely short.
53
ENVIROBURNERS
INDUSTRIAL BURNERS FOR ALTERNATIVE FUELS
APPLICATIONS:• Switch from fossil to biofuels• Utilize waste streams for energy
production• Compliance with current and future
emission requirements
Over 600 deliveries to all continents
Supplier for: Alstom, Amec FW, Andritz, Outotec, Valmet
54
ENVIROBURNERS
INDUSTRIAL BURNERS FOR ALTERNATIVE FUELS
ENVIROBURNERS’ REFERENCES
• Largest Waste Gas Flare (35 MW) for the Oki pulp mill in Indonesia• Total 73 Non Condensable/odorous Gas burners and flare incinerators
delivered• Several conversions from fuel oils to wood dust (largest project 120 MW)• Total 51 wood dust burners delivered• Several waste/biomass Gasification Gas burner deliveries• Over 160 start-up burners for CFB and BFB boilers and gasifiers deliveries• Over 200 other multifuel industrial burners for non-conventional fuels
55
ICVF Ltd
DESIGNING WASTE-TO-ENERGY EPCM PROJECTS
• ICVF Waste to Energy plant deliveries enable environmentally friendly and economically feasible electricity production turning Municipal Waste to electricity and other side products.
• Technologies and processes developed for solid waste incineration in Finland have been tested in variety of harsh climates.
• Applying these proven methods to municipal waste, an average of 20 MWh of electricity can be produced from the volume of each 1 million people waste.
56
ICVF Ltd
DESIGNING WASTE-TO-ENERGY EPCM PROJECTS
• ICVF delivers complete Engineering, Procurement and Construction Management shipment that complies with local and international standards
• ICVF can help with financing arrangements with International financiers.
CONTACTS:
• Mr Ari Tuutti+358 405 822 [email protected]
• Mr Asko Tiusanen+ 358 400 701 [email protected]
57
KPA UNICON
CUSTOMIZED AND MODULAR BOILER AND POWER PLANT SOLUTIONS
SOLUTIONS
• Turn-key or process delivery for power plants using biomass as well as oil and gas
• Financing solutions including leasing contract
• Service solutions• PlantSys system for
remote assistance and control
CUSTOMER BENEFITS
• Pre-studies and feasibility calculations to optimize the best project solution
• Support during the whole lifecycle of the plant for the best efficiency
• KPA Unicon takes responsibility for operation and maintenance of the plant
• Guaranteed efficiency, minimum load 15 % with automated operation
• KPA Unicon plants can be manufactured as modules - Modular structure minimizes the delivery time of the plant and installation time on site
CUSTOMIZED AND MODULAR BOILER AND POWER PLANT SOLUTIONS
58
KPA UNICON
ONGOING PROJECTS
• STORA ENSO WOOD PRODUCTS OY LTD, Honkalahti sawmill, Finland
• UNICON BIOGRATE 18, 1 x 17,7 MWth, Fuel: Bark, Sawmill residues
• STORA ENSO, ALA SAWMILL, Ljusen, Sweden• Unicon Biograte 15, 1 x 15 MWth,
Fuel: Sawmill residues, bark• PORVOON ENERGIA LTD, Loviisa, Finland• Unicon Biograte 10, 1 x 10 MWth,
Fuel: Bark, woodchips• ARCELORMITTAL SOUTH AFRICA,
Vanderbijlpark, South Africa • UNICON ST50, 2 X 25 MWTH, steam boiler
plant, Fuel: Blast furnace gas / Coke oven gas
59
NOCART
PROVIDING POWER
Nocart is a Finnish environmentally-conscious
energy company using multiple sources of energy
to produce high-quality electricity for use and
storage. Nocart serves the global demand at three
levels: Power Management Unit (PMU), Power
Systems and Power Sales.
Nocart solutions cover W2E and other renewable
and hybrid power systems.www.nocart.com
NOCART
FOR USE AND STORAGE
www.nocart.com
Nocart PMU is a unique product for the production of high-quality, reliable, flexible, and green grid-independent or grid-connected power from any source for own use, sale, and back-up.
Connectivity to the Smart Grid of the future enables feeding in and selling power back to the grid. Payback time for W2E solutions is typically 4-7 years.
Nocart PMU can be connected to many types of own or external sources of energy:
Industrial or animal waste, wind, hydro, wave, gas motor, sunlight, brake energy, biofuel, etc.
61
NORDAUTOMATION
HEAT AND POWER WITH MULTI-BIOFUEL TECHNOLOGY
Nordautomation’s long experience in mechanical, electrical and automation engineering and the company’s own factory facilities make total responsibility deliveries possible.
EKOHELL – COMPACT 0,5 – 3 MWBIOENERGY STANDARD SOLUTION POWER PLANT• Ekohell Compact is a ready made fully equipped
container, with or without fuel storage • Multi-biofuel power plant • Uninterrupted fuel supply and backfire prevention• Rotating self improving grateless combustion furnace• Efficient combustion process and low emissions• High efficiency• Fully automated and instrumented systems• Fast delivery• Financial leasing possibility• Ekohell 1,5 - 12 MW models are also available
62
NORDAUTOMATION
HEAT AND POWER WITH MULTI-BIOFUEL TECHNOLOGY
EKOHELL biofuel power plants produce heat and also electric power if required
The plant has a stable process even at low power.
Uninterrupted fuel supply and backfire prevention by a hydraulic piston fuel feeder, which also tolerates off-specified fuel.
EKOHELL -COMPACT standard solution adjusted for different needs and customer segments, such as:
• Greenhouse industry• Agriculture industry• Wood processing• District heating, etc.
With the rotating self improving grateless combustion furnace the plant burns peat, bark, wood chips, straw and other biomass efficiently and without clogging.
EKOHELL COMPACT is a fully automated unit.
The Finnish company Nordautomation ensures overall delivery responsibility.
63
PROTACON
SOLUTIONS FOR ENERGY PRODUCERS AND ENERGY SERVICE COMPANIES
EXPERIENCED ENGINEERS TO HANDLE PROJECTS
Protacon’s services encompass consulting, design and engineering, implementation, turn-key deliveries and maintenance & upkeep. Long-term customer relationships, commitment to deliveries and an open-minded approach to modern technologies are the backbone of Protacon’s operations.
64
PROTACON
CUSTOMER BENEFITS
Protacon enhances its customers’ competitive advantage with solutions that create new business models, streamline daily work, increase production quality, improve efficiency and free up resources to allow time for creativity.
Key Products:• ONCE: Customers have reported less than
2-month payback time
• STC (Steam Turbine Control ) A new control- and protection system allows to use higher pressure in steam turbine
REFERENCES, ONGOING PROJECTS
• N:o1 in Finland - 70% of all energy produced using solid fuels in Finland are handled by ONCE fuel management platform
• 20 pc STC projects in 3 year
• Ongoing project: • UPB Fortum Klaipeda, Liettua: ONCE
• Several automation upgrade projects to district heating plant with remote monitoring application
• Metsä Fibre Oy Rauma; STC project
SOLUTIONS FOR ENERGY PRODUCERS AND ENERGY SERVICE COMPANIES
65
SWECO
EUROPE’S LEADING ENGINEERING AND ARCHITECTURE CONSULTANCY FOR RENEWABLE ENERGY SECTOR
INDUSTRIAL ENGINEERING & ENERGY• Well-planned and well-implemented investments
strengthen industrial and energy sector competitiveness. Sweco’s specialists have the full range of skills needed to drive projects from early studies to final realization. The results are effectiveand resource-efficient production and a safe working environment.
• Sweco offers customized solutions for all types of technical investments in the industrial and energy sector, from consulting to planning, design and project management. One of Sweco’s key areas of focus is renewable energy.
SWECO plans and designs the communities, cities & industry of the future. The company’s work results in sustainable buildings, efficient infrastructure and access to electricity and clean water. With 14,500 employees in Europe, Sweco offers its customers the right expertise for every situation.
SWECO carries out projects in 70 countries annually throughout the world. Sweco is Europe’s leading engineering and architecture consultancy with sales of approximately €1.7 billion. The company is listed on NASDAQ Stockholm.
66
SWECO
CONSULTING AND DESIGN SERVICES FOR RENEWABLE ENERGY SECTOR
REFERENCES & ONGOING PROJECTSTHE BIOPRODUCT FACTORY IN FINLANDThe new Metsä Fibre bioproduct factory is the largest individual industrial investment in the history of the Finnish forest industry. It is regionally significant to Central Finland in terms of industrial jobs, wood procurement and investments in infrastructure and logistics. Sweco has acted as the primary designer from the early phases of the project all the way to implementation.
A NEW, MODERN & GREEN POWER PLANT IN HUNGARYThe new power plant at the Hamburger Hungaria paper mill in Dunaújváros is making one of the most modern board mills in Europe even more energy efficient and eco-friendly. Sweco has been involved in the project as the power plant expertin the feasibility study regarding the plant, in basic planning, in drafting questionnaires on the boiler unit and turbine installation procurement, in tender comparisons and purchasing negotiations, drafting purchasing contracts, as well as in monitoring the implementation of the project together with the owner.
• Consulting and design services for renewable energy sector and especially for projects / prospects related to biomass energy
• Feasibility studies and other consulting studies
• Owner’s engineer, lender’s engineer, technical due diligence and EPCM services
67
VALMET
Valmet - Summary• A leading process technology, automation and
services provider for pulp, paper, energy industries• Unique and market’s widest offering including process
technology, automation and services• 12,000 professionals serving global customer base• One of the world’s 300 sustainability leaders• Net sales EUR 2.9 billion• Almost half of the sales from stable Services and
Automation businesses• Increasing global demand of tissue, board, pulp and
energy creates long-term growth possibilities• Vision to become the global champion in serving our
customers
www.valmet.com
TECHNOLOGIES, AUTOMATION AND SERVICES FOR THE PULP, PAPER AND ENERGY INDUSTRIES
68
Valmet’s energy solutions Valmet is a reliable technology partner in changing
energy markets. We know how to combine energy solutions based on biomass, waste and fossil fuels. We enable you to make the most out of them for energy generation.
Together we can develop innovative solutions based on our decades of experience and wide technology, services and automation offering.
Our offering covers process technologies – combustion and gasification - for biomass, waste (RDF, SRF) and multifuel solutions.
A multifuel boiler gives the flexibility to choose the most economic fuel based on availability and price. Valmet’s HYBEX and CYMIC boilers, CFB gasifiers and air emission control systems ensure high efficiency and reliability with low emissions – even with the most challenging fuel combinations. Our advanced services and automation solutions improve the reliability and performance of your processes.
VALMET
VALMET’S ENERGY SOLUTIONS
69
ÅF-Consult Ltd.
STATE-OF-THE-ART CONSULTING AND ENGINEERING SERVICES
www.afconsult.com
CIRCULATION ECONOMY
Ekokem, Circulation Economy Village, Riihimäki, Finland
ÅF Consult Ltd. is an independent consulting and engineering company. We have been involved in design and implementation over 3 Mt/a WtE and 700 MWe biomass based power plants during the last 10 years.
We are leading provider of consultancy, engineering and project management services for WtE and Biomass based power plant projects in Scandinavia.
We operate globally and with a one stop shop approach with our extensive partner network.
ÅF-Consult Ltd.
RECENT WASTE TO ENERGY ASSIGNMENTS
ÅF is currently active in around 90 countries
ÅF has officesÅF has carried out projects
Year Client Project ÅF Services Capacity
2016 Lenders and EPC provider WtE plant in Kuwait Lenders
technical advisor 1000kt/a
2016 Istac WtE plant in Turkey OE Services 1000kt/a
2014-2016 Riikinvoima Oy Varkaus WtE CHP
Plant OE Services 145kt/a
2012-2016 Tammervoima Oy Tarastenjärvi WtE
CHP Plant EPCM 150kt/a
2009-2013 Fortum Oyj Klaipeda WtE CHP
Plant EPCM 272kt/a
2008-2013 Eesti Energia Iru WtE CHP Plant OE Services 240kt/a
2010-2012 Laanilan Voima Oy Oulu WtE Plant EPCM 120kt/a
2006-2008 Kotkan Energia Oy Kotka WtE CHP
Plant EPCM 100kt/a
2005-2007 Ekokem Oy Riihimäki WtE Plant EPCM 150kt/a
www.afconsult.com
BIOFUEL PRODUCTION AS A FUTURE OPPORTUNITY
72
ADVANCED LIQUID (bioethanol and biodiesel) biofuels and BIOGAS canbe produced from waste and residue-based raw materials e.g. animal and fish fats, used cooking oil, organic fraction of MSW, sawdust etc. Landfill gas recovery is an interesting opportunity
BIOFUEL PRODUCTION: TRENDS
EFFICIENT AND SCALABLE BIOGAS SOLUTIONS FOR ENERGY INDEPENDENCY BY REPLACING IMPORTED FOSSIL FUELS AND CREATING LOCAL JOBS
80%COMPARED TO TRADITIONAL FUELS
BIOFUELS CAN REDUCE GREENHOUSE GAS EMISSIONS BY AS MUCH AS
Finnish companies have focused their development on ADVANCED FUEL PRODUCTION technologies also from challenging feedstock and hence can offer unique solutions
73
BIOFUEL PRODUCTION:FINNISH OFFERING
74
BIOGTS LTD.
INDUSTRIAL BIOGAS AND BIODIESEL POWER PLANT MANUFACTURER AND EPC CONTRACTOR
Designing, building and operating utility-scale biogas and biodiesel plants.
Complete next generation waste management solution for Municipal Solid Waste (MSW).
Solid background in the research and development of biogas and biodiesel process technologies.
CUSTOMER BENEFITS
• Completely new way of building biogas and biodiesel power plants: Standardized industrial production, modular structures, easy to scale and retrofit.
• Lowest Capex in the market with low annual Opex. High energy efficiency. Highest energy yield per reactor and fastest breakeven period.
• Quick “plug-in”installation and start-up
• Continuously operated, fully automated, remote controlled process
75
BIOGTS LTD.
RENEWABLE ENERGY PRODUCTION, BIOGAS PLANTS AND LANDFILL GAS UTILIZATION
WHAT CAN WE OFFER FOR THE TARGET COUNTRY/INDUSTRY SECTOR?
• Compact and standard solution for treatment of solid waste.
• Scalable from farm scale to waste treatment solution for metropolises
• Robust process that handles wide variety and quality of feedstock.
REFERENCES, ONGOING PROJECTS
• Biogas plant for treatment of municipal waste, Haminan Energia Ltd., Virolahti, Finland
• Biogas plant for treatment of agricultural waste, Natural Resources Institute, Sotkamo, Finland
• Biodiesel plant for treatment of used cooking oils and animal fats, BioMpower Ltd. Laukaa, Finland
• Biogas plant for treatment of municipal waste, Mustankorkea Ltd., Jyväskylä, Finland
76
DORANOVA
RENEWABLE ENERGY PRODUCTION, BIOGAS PLANTS AND LANDFILL GAS UTILIZATION
Design, permitting, feasibility studies, turnkey deliveries, maintenances
Production of electricity, heat, biomethane and fertilizer products
KEY CONCEPT 1: Usage of organic waste streams and energy crops for biogas production
KEY CONCEPT 2: Landfill gas collection and energy production
CUSTOMER BENEFITS
• Own energy production and/or waste management
• Large variety of technologies combined according customer needs
• Fertilizer production
• Reduction of greenhouse emissions
77
DORANOVA
RENEWABLE ENERGY PRODUCTION, BIOGAS PLANTS AND LANDFILL GAS UTILIZATION
WHAT CAN WE OFFER FOR THE TARGET COUNTRY/INDUSTRY SECTOR?
• Renewable energy production from biomass and organic waste, biogas plants
• Landfill gas utilization systems, production of heat and electricity
• Feasibility studies and technology conceptualization projects
REFERENCES, ONGOING PROJECTS
• Jepua biogas plant, Finland
• BIWASE landfill gas utilization, Vietnam
• Tartu landfill gas utilization and leachate water treatment, Estonia
78
DUCTOR OY
UNIQUE FERMENTATION TECHNOLOGY THAT SERVES BIOGAS PRODUCTION
Unique fermentation technology
that serves biogas production for nitrogen control and process stabilization.
THE DUCTOR PROCESS reduces biologically the amount of nitrogenin the substrate prior to The anaerobic digestion process
The process consists of two steps: fermentation and stripping
CUSTOMER BENEFITS
• Improved turnover: avg. +14%
• Decreased feedstock costs: avg. 50%
• Short payback time: 4-5 years
79
DUCTOR OY
UNIQUE FERMENTATION TECHNOLOGY THAT SERVES BIOGAS PRODUCTION
REFERENCES, ONGOING PROJECTS
Pilot and laboratory in Finland
Sales agreements in Germany
International recognition; GCCA, Fraunhofer UMSICHT, HORIZON 2020
WHAT CAN WE OFFER FOR THE INDUSTRY SECTOR?
• Improved operational performance
• Social and environmental benefits
• Competitiveness among renewable energy
80
ENVOR PROTECH
ENVOR PROTECH offers high-class specialist services in technology, design, project manage-ment and industrial economics. The services also include equipment and plant deliveries.
SERVICES:
• Project management and engineering services in the fields of process and environmental technology
• Process and plan design services• Waste management: Focus is especially on anaerobic digestion
of organic matter (biogasification). The biogasification technology is based on the HLAD (High Loaded Anaerobic Digestion).
• Process technology• Waste water treatment: Envor Protech designs waste water
pumping stations and equipment buildings. The scope of design includes general arrangement plans, detail design of pump tanks, equipment buildings and other equipment. The company also designs waste water unit processes and other waste water solutions for the process industry and industrial plants.
• Equipment and plant deliveries
TURNING BIOWASTE TO BIOGAS AND VALUABLE FERTILIZERS
81
ENVOR PROTECH
REFERENCES
Kunming, China (2014)Capacity: 182 500 t/aWaste type: WWTP sludge
Forssa, Finland (2008-2011)Capacity: 84 000 t/aWaste type: WWTP sludge, biowaste grease pit sludge,
industrial sludge
Hämeenlinna, Finland (2012)Capacity: 17 000 t/aWaste type: Concentrate & solid waste from bioethanol plant
Rayong, Thailand (2004)Capacity: 31 000 t/aWaste type: Biowaste vegetable & fruit waste, municipal sludge
TURNING BIOWASTE TO BIOGAS AND VALUABLE FERTILIZERS
CUSTOMER BENEFITS
• Environmentally sustainable, energy efficient and economical solution for biodegradable waste treatment
• Turnkey solutions, tailored for your need
• Reduce waste amount over 50 %
• Trustable solution with high utilization rate
• Use of biogas for CHP-production or upgrade to fuel
82
FINRENES OY
SOLUTIONS IN BIOENERGY AND BIOFUELS
Finrenes Oy is a company in renewable energy business, providing solutions in bioenergy and biofuels
• Our product is a waste biomass pre-treatment device
• Our key concept is: traffic fuel, heat and power production from second generation waste biomass
• Our technology enables both biogas and heat & power production from widest selection of waste biomass with low operating costs
50%– CAPEX SAVINGS
INCREASE BIOGAS SPEED
USE WASTE BIOMASS TWICE – PROFIT INCREASE FROM WASTE BIOMASS
USE OWN ENERGY FOR PRETREATMENT AND DRYING
– OPEX SAVINGS
PRODUCE TRAFFIC FUEL WITHOUT ENZYMES– OPEX SAVINGS
HONKAJOKI OY
Wealth by Recycling - Honkajoki animal by-product plant
Environmental protection is crucial in today’s world. All solutions that reduce waste are in everyone’s interest.
The Honkajoki production plant utilises animal by-products, such as by-products from slaughterhouses, other animal by-products, dead cattle and pets, carcasses, pigs, fowl, horses, food waste, and plant-based waste. Nothing is left unutilised!
Our recycling process is a highly refined and carefully regulated operating model that returns natural raw materials to nature for reuse.
The operating principle behind the Honkajoki recycling plant of animal by-products is simple: unutilised animal by-products are turned into easily marketable raw materials for the fertilizer industry, the manufacture of fuels, and the production of feed, for example, as well as energy and clean water that be sold to other parties.
www.honkajokioy.fi
AGRO ECOLOGICAL OPERATING MODEL - We create growth through recycling –
HONKAJOKI OY
www.honkajokioy.fi
This high-tech “Honkajoki by-product plant” concept is a valuable investment with an operational model that can be expanded to a complete, self-sufficient and ecological production concept.
85
St1
A PIONEER IN WASTE-BASED BIOETHANOL PRODUCTION
St1 is a Finnish energy company operating in the Nordics, implementing our vision to be the leading producer and seller of CO2-aware energy. We research and develop economically viable, environmentally sustainable energy solutions to replace fossil fuels.
St1 has a network of ~1450 St1 and Shell service stations. Our oil refinery is one of the world’s most energy-efficient refineries and our goal is to transform it into a biorefinery. An advanced ethanol plant is already integrated into it. One of St1’s associated companies is the largest producer of wind power in Finland. We also have an industrial-scale geothermal pilot heat plant project. Our advanced ethanol production plants are based on our own technology and use feedstock outside the food chain: industry residues and waste. We develop waste-to-ethanol business and make strong R&D investments in advanced biofuels.
• Revenue 5800 million euros (2014)• Employees 700
Etanolix® plants refine waste and residues which are rich in starch and sugar into advanced ethanol and valuable side products
Cellunolix® enables the use of sawmill side products like saw dust and chips in ethanol production
Bionolix® plant enables the production of advanced ethanol and biogas from municipal and commercial biowaste
www.st1biofuels.comwww.st1.eu
86
VTT TECHNICAL RESEARCH CENTRE OF FINLAND LTD.
R&D SERVICES, PILOTING AND TESTING RELATED TO BIOENERGY AND WASTE-TO-ENERGY
VTT provides technological background for business related to new solutions and existing assets
• Small scale CHP+C for industry, off-grid and rural areas
• High efficiency Waste-to-Energy and metals recovery
• Optimized boiler operation, lifespan extension and plant economy
CUSTOMER BENEFITS
Efficient use of available, sustainable resources for heat power and cooling secure the profitable energy supply in changing policy environment and challenging grid conditions
• Double your income in W-t-E• World class piloting facilities available for your
testing• Top class technology know how with 50 years
experience of boiler development
87
VTT TECHNICAL RESEARCH CENTRE OF FINLAND LTD.
R&D SERVICES, PILOTING AND TESTING RELATED TO BIOENERGY AND WASTE-TO-ENERGY
REFERENCES, ONGOING PROJECTS• Over 100 CFD modelling cases
of boilers world-wide
• Development of gasification technology with 40% waste-to-energy conversion rate
• Gasification, CFB and pyrolysis pilot plants
What can we offer for the target country/industry sector?
• Feedstock analysis and fuel characterization
• Techno-economic appraisal and feasibility studies
• Comprehensive knowledge of thermo-chemical conversion of waste and biomass to energy, heat and fuels
88
WATREC LTD
GLOBAL LEADER IN MATERIAL HANDLING SYSTEMS
Biogas Plant Our solutions
Wastewater treatment
Expertise
OperationalPyrolysis
Watrec Ltd. is a Finnish company specialized in biogas technology and consultancy services for environmental and energy related issues.
www.watrec.com
89
WATREC LTD
GLOBAL LEADER IN MATERIAL HANDLING SYSTEMS
References
• Riihimäki Biogas Plant - 75 000 t/a, 6 MW
• Materials: Sewage sludge, source separated biowaste, OFMSW, industrial sludge
• More referenes: Oulu BP, Kuopio BP, Honkajoki BP and WWT, etc.
90
OUR EXPERTISE AT YOUR SERVICE
Helena Sarén, Program Directoremail. [email protected]. +358 40 343 3324
Saku Liuksia, Program Manageremail. [email protected]. +358 50 303 8326
Kirsi Koso, Program Coordinatoremail. [email protected]. +358 50 463 2244 /
MORE INFORMATION
www.circularbioecofin.com