ERIKS RX PPE Catalogue

RX® Personal Protective Equipment

2 3

The use of the correct Personal Protective Equipment at work is essential. The work-ing environment and conditions determine the most appropriate protection in order to guarantee the safety of employees. In this catalogue all the functionalities and charac-teristics of RX® PPE are explained. A great deal of attention has gone into ergonomics and design - without compromising on quality. This means end-user acceptance is high, and compliance with your company’s PPE policy is assured.

In addition, we’ve paid extra attention to guidance in relation to the correct use of RX® PPE. For respiratory protection, the catalogue also provides more information about Fit Testing. Here potential wearers are individually taught how to properly fit a mask. This test can also show whether the mask is truly suited to the facial features of the wearer.

What does the laW say? Personal Protective Equipment (PPE) is equipment intended to be worn or held by a person as protection against health and safety hazards.

When does the employer need to make personal protective equipment available?First of all, risks should be avoided as much as possible at source. When risks cannot be ruled out 100%, the employer is obliged to apply collective protection measures (e.g. by putting a safety guard around a machine). If the aforementioned measures cannot be applied, the em-ployer must make appropriate Personal Protective Equipment (PPE) available, and provide training in its proper use. The employee in turn is required to use the Personal Protective Equipment made available to them.

RX® Personal Protective

Equipment

3

disposable masks 4

Legislation and regulations 6

Selection and use 7

Fit Testing 8

RX® Folded disposable mask 9

RX® Pre-formed (cupped) disposable mask 10

RX® Pre-formed (cupped) and reinforced disposable mask 11

saFety eyeWear 12


Meanings of the EN marking 15

RX® Coating 16

Lenses 17

RX® Range 18

RX® Optiflex-C Clear lens 19

RX® Optiflex-B Brown lens 20

RX® Optiflex-W Welding glasses 21

RX® Optiflex-G Wide-vision Goggles 22

RX® Optiflex-V Visitor glasses 23

saFety shoes 24


Pictograms 27

Specifications 28

RX® Securo 30

RX® Solido 30

saFety gloves 32


Glove Markings 35

Dyneema® Technology 36

Size table 38

Coatings 39

RX® Dyneema Safe3 41

RX® Top-Flex PU Black & White 42

RX® Nitri-4-Grip 43

RX® Durafit NFT 44

RX® Chemresist 45

TablE of conTEnTs

4 5

Disposable masksFine particles, toxic gases, vapours, smoke or mist in the atmosphere are latent health hazards. In the short term, they can cause or worsen acute problems with your airways and in the long term they affect the lung function … and this can have dire consequences of course.

By acting preventatively and providing employees with suitable respirators, a large part of the unhealthy effect can be eliminated.

However, correct use of these respirators is crucial. When the masks are not put on correctly or do not entirely correspond with the face profile, the necessary protection is insufficient or even non-existent. That is why ERIKS attaches so much importance to the correct use of the disposable masks.

A Fit Test will determine what type of mask is best suited to the wearer. It also trains the employee in how to fit a mask correctly.

See page 8 for more information about Fit Tests, or contact your local ERIKS Service Centre.

5

6 7

The law specifies that the employer must carry out a risk inven-tory and evaluation (RI&E) to map possible dangers and take measures if necessary.

ce marking & technical standards Personal Protective Equipment in Europe must have CE marking. To award it to a product, a technical inspection by an independent authority is required as well as a prescribed quality control by the supplier.

european standard (en)These products meet the requirements of EC Directive 89/686/EEC (Personal Protective Equipment Directive) and are therefore CE marked.RX® masks have been tested and CE approved in accordance with EN 149:2001+A1:2009.

Type Offers protection against NPF APF

FFP1 Inert dust and airborne particles. (Not against CMR substances )

4 4

FFP2 Harmful dust and airborne particles.(Not against CMR substances )

12 10

FFP3 Higher concentrations harmful dust and airborne particles

50 20

cmr substances – carcinogenic mutagenic repro-toxic substancesCMR substances are carcinogenic mutagenic repro-toxic sub-stances. More specifically, substances which on their own (car-cinogenic substances) or in combination with other substances (mutagenic substances) can cause cancer. Repro-toxic sub-stances can have a negative effect on fertility, but also cause damage during the development of the unborn child and result in congenital disorders.

npF - nominal protection FactorThe theoretical protection level of a respirator is based on the performance measured during tests in laboratories. The NPF is calculated by the Total Inward Leakage (TIL), as specified in the EN in question, divided by 100. The maximum concentra-tion of a substance in the air, against which a respirator offers protection, is calculated by multiplying this NPF with the limit (the limits are specified in the lists published by the European authorities).The Nominal Protection Factor is a number denoting the level of minimal protection of the relevant type of mask. The higher the number, the better the protection.

apF - assigned protection Factor Determined following practical tests in the workplace. Unsat-isfactory maintenance, instruction, incorrect use, movement, etc. are taken into account. As specified in BS4275, APF is the level of protection, which can be realistically achieved for 95% of trained and supervised users.

For more information on workplace exposure limits, and to view the list of substances currently listed visit www.hse.gov.uk

lEgislaTion and REgulaTions

7

ERIKS does not merely help you with selecting your dispos-able mask, but also gives you more information as to how these high-quality products should be used in order to guarantee maximum protection.

selectionAn RX® disposable mask supplied by ERIKS protects against:

Dust: Particles whether or not floating in the air (i.e caused solid materials are crushed)

Mist: Liquid particles floating in the air Fumes: Metal Particles floating in the air resulting from a

combustion process

Warning:Disposable masks should not be used in Oxy-gen deficient atmospheres, or against harmful gases and vapours in concentrations exceeding the limit value.

useRX® dust masks are high-quality products and offer a high level of protection. However, correct use of the masks is crucial. Incorrect use and a bad fit do not achieve the desired results and can have dire consequences.

steps

Hold the mask firmly and place the bottom headband over the head to the nape of the neck.

Place the mask under the chin, then over the nose, putting the top head band over the crown of the head.

Ensure a good fit by pulling back the side clips on the face and adjust comfort.

Ensure that the nose clip is moulded around the nose security.

sElEcTion and usE

1

2

3

4

fiT TEsTing

8 9

Why Fit test?Personal Protective Equipment offers protection against spe-cific risks to the health and safety of employees. However, PPE can also expose the user to to risk through improper use, incor-rect application, etc. The right choice of PPE and their correct use are therefore essential.

More than with gloves, footwear, or eye wear, the correct fit of respirator is critical for its effectiveness. A Fit Test includes training on how to fit a mask correctly to ensure a good face seal.

useA sweet or bitter solution is sprayed into the hood with an at-omiser. If the wearer can taste the substance, he/she will be retested and adjustments will be made as long as the leak re-mains. The test has only been successful if the employee can no longer taste anything. The mask is then approved.

In addition, before and during the Fit Test, a step by step expla-nation is given of how the masks are used correctly to ensure optimum protection.

Please contact your local ERIKS Service Centre for more infor-mation.

rX FFp1

rX FFp2

rX FFp1v

rX FFp2v rX FFp3v

9

A single use, lightweight, ergonomically shaped disposable respirator for protection against non toxic and toxic particles.

technical specifications Lightweight: P1 & P1V = 2 g; P2 & P2V = 3 g; P3V = 4 g Multi layered filter medium electrostatically charged Ergonomically shaped for comfort and ease of use Adjustable head straps to provide individual fit Adjustable nose clip to ensure good seal around nose Individually packed complete with instructions for use Conforms to the European approved standard

EN149:2001+A1:2009NR Non-allergenic Exhalation Valve added for easier breathing (P1V, P2V &

P3V)

Features beneFits

Flat model Easy to carry and store

Vertically folded Small “dead” space for comfortable breathing

Each piece wrapped in individual bags

Hygienic

Adjustable nose strip Increases comfort and safety

part. n° description packaging npF* apF**

RX-DM-F1 RX FF P1 disposable mask folded 20 4 4

RX-DM-F1V RX FF P1V disposable mask folded + valve 10 4 4

RX-DM-F2 RX FF P2 disposable mask folded 20 12 10



RX® FLAT-FOLD DISPOSABLE MASK

* NPF: Nominal protection factor (see p. 6)**APF: Assigned protection factor (see p. 6)

10 11

rX FFp1

rX FFp2

rX FFp1v

rX FFp2v rX FFp3v

RX® pre-formed masks are manufactured to the highest standards and provide excellent comfort and protection. A range of protective factors are available both with - and without valve.

technical specifications Multi layered filter medium electrostatically charged Ergonomically shaped for comfort and ease of use Adjustable nose clip to ensure good seal around nose Conforms to the European approved standard

EN149:2001+A1:2009NR Non-allergenic Exhalation Valve added for easier breathing (P1V, P2V &

P3V)

Features beneFits

Pre-formed mask Quick to use

Round model Small “dead” space for comfortable breathing


RX-DM-C1 RX FFP1 disposable mask pre-formed 20 4 4

RX-DM-C1V RX FFP1V disposable mask pre-formed + valve 10 4 4

RX-DM-C2 RX FFP2 disposable mask pre-formed 20 12 10



RX® PRE-FORMED (CUPPED) DISPOSABLE MASKS



11

rX FFp2

rX FFp2v rX FFp3v

Due to its lightweight netted construction, this mask has a very low breathing resistance, so even during the most demanding working conditions the wearer enjoys the highest possible comfort.

technical specifications Multi layered filter medium electrostatically charged Reinforced net keeps the mask in its original form making

it last longer. Particularly suitable during hot and humid conditions

The valve cover protects the valve avoiding mechanical damage.

Ergonomically shaped for comfort and ease of use Adjustable head straps to provide individual fit Conforms to the European approved standard

EN149:2001+A1:2009NR Non-allergenic Exhalation Valve added for easier breathing (P2V & P3V)

Features beneFits

Reinforcing net Keeps the mask in its original form making it last longer. Particularly suitable during hot and humid conditions

Valve cover Protects the valve avoiding mechanical damage

Soft seal Comfortable and safe

Adjustable band Adjustable straps provide excellent fit (suitable for wearing with safety glasses)

Fastener inside the band

Convenient to hang around the neck when not using the mask


RX-DM-N2 RX FFP2 Pre-formed disposable mask reinforced 10 12 10

RX-DM-N2V RX FFP2V P2 Pre-formed disposable mask reinforced + valve 10 12 10

RX-DM-N3V RX FFP3V P2 Pre-formed disposable mask reinforced + valve 5 50 20

RX® PRE-FORMED (CUPPED) AND REINFORCED DISPOSABLE MASK

131212 13

13

safety eyeWeaR

13

The Optiflex rangeThe eyes are arguably the most fragile in terms of damage. Once damage has been inflicted, this often has serious consequences and usually the damage is irreversible. Rightly we should do anything to reduce the injuries to an absolute minimum.

Flying particles cause the majority of eye injuries. Splashes of molten metal or corrosive liquids are detrimental in case of eye contact. When welding, the bright light, the ultraviolet and infrared rays can damage your eyes. Reason enough to be extra careful.

All these different risks demand a specific approach. The working environment is decisive when choosing eye protection. This section explains all functions and features of RX® brand safety glasses. In addition to the protection factor we have paid a great deal of attention to the ergonomic aspect. The revolutionary “Shape Memory Technology”, ensures that RX Safety Eyewear gives exceptional wearer comfort, with the added bonus of a modern, stylish design, for every user.


14 15

basic standardsen 166 Personal eye protection specifications

en 167 Optical test methods

en 168 Non-optical test methods

standard for specific applicationsen 169 Filter for welding and related techniques

en 170 Ultraviolet (UV) ray filters

en 171 Infrared (IR) ray filters

en 172 Sunglare filters for industrial use

en 175 Equipment for eye and face protection during welding and allied processes

en 379 Specification for automatic welding filters

lens marking identification2-3 u 1 Ft kn

Shade number Manufacturer Optical class Mechanical

resistanceOptional

requirement

Frame marking identificationu en166 Ft

Manufacturer Standard Mechanical resistance

lens marking identification

2c-1.2 u 1 bt 9 k n 0068

Scale number Manufacturer Optical class Mechanical resistance Field of use

Optional requirement

Notified body

Frame marking identification

u en166 3 4 5 9 bt 2c-1.2 0068

Manufacturer Standard Field of useMechanical resistance

Maximum number of scale

protectionNotified body

marking identification optiflex-c-b-W

marking identification optiflex-g

15

Scale NumbercodE numbER dEscRiPTion shadE numbER dEscRiPTion VlT* RangE

2 Ultraviolet (UV EN170) 1.2 Clear 100% - 74,4%

2c of 3 Ultraviolet with good colour recognition 1.7 In/Out, yellow, clear mirrored, UVR 58,1% - 43,2%

4 Infrared (IR EN171) 2.5 Brown, smoke 29,1% - 17,8%

5Sunglare filter without infrared specification (EN172)

3.1 Smoke mirrored 17,8% - 8,0%

6Sunglare filter with infrared specification (EN172)

3,4,5,... 11 Welding

* VLT – Visible Light Transmission

OPTIcal claSS

TyPE dEscRiPTion

1 Suitable for prolonged use

2 Suitable for sporadic use

3 Suitable for transient use

mechaNIcal reSISTaNce mEchanical REsisTancE imPacT maXimum sPEEd PolycaRbonaTE

glassEs gogglEs

a (t) High energy impact 190 m/s

b (t) Medium energy impact 120 m/s •

F (t) Low energy impact 45 m/s • •

t Tested under extreme temperatures (-5° - + 55C°) • •

k Resistance against surface damage against fine particles • •

n Resistance against fogging • •

FIelD OF uSeSymbOl DeScrIPTION GOGGleS

3 Liquids (droplets or splashes) •

4 Large dust particles (> 5 μm) •

5 Gas and fine dust particles (< 5 μm) •

8 Short circuit electric arc

9 Molten metals and hot solids •

mEanings of ThE En maRking

RX® coaTing

16 17

The innovative RX® coating technology provides the RX® safety glasses with superior resistance to scratches (outside), and fog-ging (inside).

Coatings that have the double-effect (anti-scratch and anti-fog are mixed in 1 coating and therefore attain only half the ef-ficiency); the RX® coating is 100% effective. The 2 coatings are applied separately where the anti-scratch coating is applied exclusively on the outside, and the anti-fog exclusively on the inside.

anti-scratch:The treatment of the external surface of the lens with this coat-ing forms a hard film which constitutes a barrier against superfi-cial damage which obstructs the view. The RX® lenses are thus protected against scratches and wear caused by friction with hard particles and dusty surroundings. The RX® Anti-scratch treatment is certified according the K re-quirements of the EN166 standard.

anti-fog:The anti-fog treatment is a film with a thickness of a few mi-crons which is applied to the entire inner surface of the lens. The chemical and physical characteristics of the coating pre-vent condensation because the coating absorbs the fog. The RX® anti-fog coating is permanent and is certified accord-ing to the N requirement of the EN166 standard.

17

polycarbonateClear

Features: Protects against impact and UV rays Can be used for longer periods of

time and causes neither distortion of the view nor eyestrain

No colour distortion

applications: Mechanical activities requiring a good view.

standards: EN166/EN170

marking: 2C-1.2

vlt*: 89%

polycarbonateBrown

Features: Protection against impact, UV rays

and harmful beams of light Use in the event of sunlight and risk

of blinding Excellent colour recognition - TSR

(Traffic Signal Recognition) Lets the light (spectrum) linearly go

through Ensures a better adaptation of the

eye to variable lighting conditions

applications: Activities outside and mechanical activities with risk of blinding.

standards: EN166/EN170/EN172

marking: 2C-3/5-3.1

vlt*: 16%

sunglasses equivalent: Shade 3

polycarbonateGreen (Shade 5)

Features:Protection against impact, UV and infrared rays and blinding caused by welding activities.

applications:Lens in shade 5 for oxy-fuel welding and cutting

standards: EN166/EN169 & EN170

marking: 5

vlt*: 2%

lEnsEs

* VLT - Visible Light Transmission

RANGE RX® OPTIFLEX SAFETy EyEWEAR

18 19

Where protection, quality and design meet!

Maximum comfort and the highest level of protection are essential when eye-protection must be worn for both longer and occasional periods. Features such as lightweight, stability and a perfect fit contribute to this end.

The RX® Optiflex-C lens is an integral part that helps shaping the geometry of the safety glasses. The lens is only fitted in the middle of the frame, resulting in a perfect adaptation to the contours of the face. Hence an excellent fit is assured without compromising the pro-tective characteristics.

The RX® Optiflex-B brown lens improves the adaptation of the eye to variable lighting con-ditions. This makes the safety glasses highly suitable for activities where bright light and shadow interact.

rX® optiflex-c

rX® optiflex-b

rX® optiflex-W

rX® optiflex-g

rX® optiflex-v

19

Features & beneFits Lightweight (31 g)

Perfect fit (comfortable, soft components for nose, ear and forehead)

Polycarbonate lens with unique RX® coatings

Ventilating

The safety glasses adapt themselves without adjustments to the contours of the face

Stylish design

Extremely flexible and unbreakable frame

Impact test according to MIL-PRF-31013 standard (195-201 m/s)

Compliant with EN166 + EN170 standards

RX® OPTIFLEX-C

31 g

part. n° description

RX-Optiflex-C Safety glasses with clear PC lens

20 21

Features & beneFits Lightweight (31 g) Perfect fit (comfortable, soft components for nose, ear and

forehead) Polycarbonate lens with unique RX® coatings The safety glasses adapt themselves without adjustments to

the contours of the face Stylish design Extremely flexible and unbreakable frame Protection against impact, UV rays and beams of light The brown colour of the lens improves the adaptation of the

eyes to variable lighting conditions Good colour recognition - TSR (Traffic Signal Recognition) Compliant with EN166 + EN170 + EN172 standards

RX® OPTIFLEX-B

31 g UV400


RX-Optiflex-B Safety glasses with brown PC lens

21

Features & beneFits Lightweight (31 g) Perfect fit (comfortable, soft components for nose, ear and

forehead) Polycarbonate lens with anti-fog and anti-scratch coating Ventilating The safety glasses adapt themselves without adjustments to

the contours of the face Stylish design Extremely flexible and unbreakable frame Protection against impact, UV rays and beams Shade 5 lens for oxy-fuel welding and soldering Compliant with EN166 + EN169 standards

RX® OPTIFLEX-W

31 g


RX-Optiflex-W Safety glasses with PC lens shade 5

22 23

Features & beneFits Polycarbonate lens

Lightweight (43 g) more comfortable to wear

Side ventilation

Fits over regular glasses without compromising comfort

RX® OPTIFLEX-V

43 g


RX-Optiflex-V Visitor glasses

23

Features & beneFits Lightweight (93 g)

Ergonomically designed; 180° wide-vision goggles

Highest optical quality lens class 1

CE approved, EN166 against splashes of chemical liquids, large dust particles, molten metal

Wide and fully adjustable elastic headband

Indirect ventilation

Anti-scratch and anti-fog coating

The RX® Optiflex-G wide-vision goggles offer the wearer a better protection. Thanks to the wide coverage of the face, the adjust-able headband and the superior impact resistance, the RX® Optiflex-G wide-vision goggles are a reference in the market. The sophisticated indirect ventilation system reduces fogging to a minimum. The soft silicone casing ensures an optimum comfort and protects against impact and chemical splashes.

RX® OPTIFLEX-G

93 g


RX-Optiflex-G Wide-vision goggles

24 25

safety footWeaRThe right footwear The right safety footwear is vital at work! your working environment is a crucial element when choosing the correct safety footwear. This catalogue explains all the benefits and features of RX® safety shoes & boots. We explain what you should pay attention to, so that your employees are properly protected by foot-wear suited to their needs and requirements.

RX® Securo and RX® SolidoThe RX® Securo and RX® Solido are quality safety shoes & boots made of light-weight materials, with shock absorbent soles and composite toe protection, plus MS3 non-metallic penetration resistant midsole. This makes RX® FOOTWEAR one of the most comfortable and stylish on the market.

25

26 27

iso 20345:2011 specifies basic requirements and additional properties of safety shoes & boots that are for general purpose use. The standard details amongst others, mechanical risks, anti-slip, thermal risks and ergonomic behaviour.

sb = Safety Basic, safety shoes for professional use with a pro-tective toe cap that has been tested for an impact of 200 joules.

The CE mark confirms that the basic health and safety requirements as stated in the Eu-ropean directive EEG/89/686 concerning Per-sonal Protective Equipment are met. This way you are assured that the product is harmless, offers great comfort and stability and protects against falling and slipping. Furthermore, the model is subject to an EC type-examination by a certified body.

s1 - as SB, plus closed & energy absorbing heel.

s1p- as S1, plus penetration resistant midsole

s2 - as S1, plus water resistant uppers

s3- as S2, plus penetration resistant midsole

meaning of the category (performance level) meaning of further symbols identifying the protective function

P Penetration resistance 1100 N

C Conductive no more than 100 kΩ

A Antistatic 0,1 MΩ ad 1000 MΩ

I Electrically insulating shoes

more than 1000 MΩ

HI Insulating against heat

CI Insulating against cold

E Energy absorption in the heel area

20 J

WR Water resistance for classification I footwear

M Metatarsal protection

AN Ankle protection

WRU Water penetration and water absorption

CR Resistance to cuts

HRO Outsole resistant to hot contact

300 °C

The only risks covered are those identified on the shoe. Parts subsequently added may alter the product characteristics.


27

ultra slip resistant soleExcellent traction with extraordinary ultra slip resistant soles. Approved to both SRA (tested with soap on ceramics) and SRB (tested with oil on steel), which automatically achieves the best standard for slip-resistant soles - SRC.

composite toe capA composite toe cap is Non-metallic. Tested to 200 joules (EN12568) composite toe caps benefit from the elasticity of the raw material, which creates a sort of “memory effect”. This means the toes are not trapped, even when the shoe has experienced an impact.

sole resistant to temperatures up to 300 °c contact heatFootwear with this labelling has soles, which are resistant to temperatures up to 300 °C contact heat.

teXtile sole penetration protectionMidsole protection made of special fibres. The midsole protection is certified under EN ISO 20 345:2011. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions, which gives a high comfort degree for the wearer.

scuFF padA scuff pad is a flexible pad which allows more ‘give’ at the point where the foot flexes when kneeling. Ideal for jobs where kneeling is required.

oil and petrol resistant outsoleThe outsole is oil and petrol resistant.

rubber toe reinForcementThe rubber reinforcement on the toe helps resist wear and extends the life of the shoe considerably.

ladder gripA purpose made insert at the edge of the sole to improve grip and safety whilst using ladders.

shock-absorbing comFort soleAll RX® comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.

pictograms

hro 300 °c

28 29

rX® safety footwear relieve the feet and the back

The innovative design of RX® safety shoes & boots promote wearer comfort and ensure better protection of the foot. The component parts of the safety footwear are processed in such a way that no internal materials irritate the foot.

Technical textile materials, such as MS3, are primarily used for the anti-per-foration sole. This makes it possible to cover the entire sole as opposed to a steel plate, which offers no protection around the outer edge. Additionally, MS3 textile offers better protection in cold and warm temperatures. MS3 textile anti-perforation sole also provides more sole flexibility and improved walking comfort.

sPEcificaTions

soft & comfortable inner lining

ultra slip resistant and shock-absorbing comfort sole

oil and petrol resistant

resistant to temperatures up to 300 °c contact

stabilizing tpu

heel support

ladder grip

29

flexible scuff pad for workingon the knees

composite toe cap

anti-perforation sole made from ms3 textile for more flexibility

rubber toe reinforcement

30 31

RX® SECURO

RX® SOLIDO

hro 300 °c

31

Features & beneFits Composite toe cap which can resist a pressure of 200 J Anti-perforation sole made from MS3 textile; very

flexible, gives a much better walking comfort, isolates against the cold and/or heat and protects a larger area of the foot

Scuff pad allows more ‘give’ at the point where the foot flexes. Ideal for jobs where kneeling is required.

Quality uppers stabilises and supports the foot TPU heel support Reflective accents for high visibility Shock-absorbing comfort sole for better walking

comfort PU/rubber sole material; oil and petrol resistant HRO resistant to 300 °C contact heat SRC sole for improved slip resistance Ladder grip prevents slipping on ladders Extra Wide Fit EU sizes: 38 – 47 , UK sizes: 5 – 12

SAFETy FOOTWEAR

a study on the anatomy of the foot

The days of wearing heavy safety footwear, offering poor standing and walking comfort, and annoying, hard, irritating materials are now finally gone. Wear-ers of safety footwear now demand much greater comfort – especially those working long shifts. The provision of high quality safety footwear to employ-ees results, not only in accident reduction, but also a reduction in worker fatigue. Less fatigue = increased productivity. The development of RX® safety footwear is based on the anatomy of the foot, and the way in which a person moves around dur-ing a working day. This has resulted in safety foot-wear with a difference.

part. n° description size eu/uk

RX-SECURO-38 RX safety shoe S3 Securo, size 38/5 RU/PU HRO composite toe + MS3 mid-sole

38/5


39/6

RX-SECURO-40 RX safety shoe S3 Securo, size 40/6.5 RU/PU HRO composite toe + MS3 mid-sole

40/6.5


41/7


42/8


43/9


44/10

RX-SECURO-45 RX safety shoe S3 Securo, size 45/10.5 RU/PU HRO composite toe + MS3 mid-sole

45/10.5


46/11


47/12

RX-SOLIDO-38 RX safety boot S3 Solido, size 38/5 RU/PU HRO composite toe + MS3 mid-sole

38/5


39/6

RX-SOLIDO-40 RX safety boot S3 Solido, size 40/6.5 RU/PU HRO composite toe + MS3 mid-sole

40/6.5


41/7


42/8


43/9


44/10

RX-SOLIDO-45 RX safety boot S3 Solido, size 45/10.5 RU/PU HRO composite toe + MS3 mid-sole

45/10.5


46/11


47/12

32 33

33

safety GloVes Why hand protection?The hand is a complex body part and contains an ingenious network of nerves and tendons that allow us to execute the most ordinary to the most complex motor movements.

During every day activities all parts of the hand are exposed to risks such as cuts and burns, chemicals, etc. Most accidents involving injury to the hands happen in the workplace. Without adequate protection, any injury, no matter how small, can have a serious impact on an indivual, both at work and in the home.

Attention to the various dangers in the workplace and the provision of the cor-rect glove for different applications helps reduce risks to a minimum. This can result in reduced accidents, reduced sickness, reduced litigation, and increased production.


34 35

In order to help in making the right choice of Personal Pro-tective Equipment simple, the PPE directive (89/686/EEG) was drafted. The various types of safety equipment are classified, which enables the responsible safety personnel to correctly assess the possible dangers and risks so that adequate PPE

GlOve STaNDarDS

EN 420 General requirements for gloves

Construction and design, level of protection, cleaning, maintenance and storage, durability, dimensions and user instructions

EN 388 en 388: 2003 Protective gloves against mechanical risks

Rating:a. abrasive resistance 1-4 Resistance # cycles 1≥100 2≥500 3≥2000 4≥8000 b. cut resistance 1-5 Cutting index # cycles 1≥1.2 2≥2.5 3≥5 4≥10 5≥ 20c. tear resistance 1-4 Force (N) necessary to tear the material 1≥10 2≥25 3≥50 4≥75d. perforation resistance 1-4 Force (N) necessary to perforate the material 1≥20 2≥60 3≥100 4≥150

EN 374 en 374: 2003 Glove with low chemical resistance or water-tightness

Incubation time > 30 min for at least 3 chemicals from the list below

EN 374 en 374: 2003 Protection against micro-organisms

AQL (Acceptable Quality Level) < 2

EN 374 en 374: 2003 Chemical-resistant glove. The 3 letters represent the chemicals from the list of 12 standard chemicals.

LETTER CODE CHEMICAL SUBSTANCE

A Methanol B Acetone C Acetonitrile D Dichloromethane E Carbon disulfide F Toluene G Diethylamine H Tetrahydrofuran I Ethyl acetate J n-Heptane K Sodium hydroxide L Sulphuric acid

Performance level (AQL) 1 2 3 4 5 6

Incubation time (min.) >10 >30 >60 >120 >240 >480

can be made available.

As far as safety gloves are concerned, the characteristics which the gloves must comply with are described in a series of Euro-pean standards.

XXXX

XXXX

XXXX

XXXX

35

gloVE maRkings

XXXX

NamecODeSIze

XXXX

Relevant Pictograms

Rating

Notified Body Number

CE Mark

Product Name

ERIKS Part Number

Size of Glove

Logo

dynEEma® TEchnology

36 37

Dyneema® Technology, a patented fibre innovation from DSM Dyneema, offers the most comfortable and lightest solution for extreme cut resistance. This state-of-the-art technology is pushing forward the properties of cut resistance in a lightweight and ‘natural feeling’ fibre.Applying Dyneema® Technology in a lightweight elasticised glove can boost cut performance levels up to EN388 Level 4, without the use of glass fibre or steel wire. It requires no com-promise on comfort, tactility and weight of the glove, while pro-viding significantly higher cut resistant performance, and better durability - especially compared to aramid based gloves.

abrasion resistanceProtective gloves are often exposed to (sharp) objects that can abrade the glove. The more the glove is abraded the less pro-tection it offers. Naturally, the higher the abrasion resistance a glove offers, the longer the wearer is protected. The chart shows the correlation between abrasion resistance and cut resistance consistency. Thanks to the high crystalline proper-ties of the Dyneema® fibre, the abrasion resistance is extremely high; therefore the cut resistance remains at a constant high level, unlike other materials like cotton and aramids that show a decline in cut protection during wear of the gloves.

comfortGloves with Dyneema® will keep your hands cool. In order to keep the hand or body temperature on a constant and therefore comfortable level, it is necessary to keep heat emission in bal-ance with heat production. Protective clothes have to support this by dissipating heat from the inside to the outside. High Modulus Polyethylene (HMPE) has the property to transfer heat very quickly from the inside to the outside of the glove. Thanks to HMPE’s high heat conductivity, a glove made with sufficient HMPE content can release body heat much faster to the outside of the glove compared to other materials. This will prevent body heat accumulation inside the glove and thus sweaty hands.

The higher the Dyneema® content in a glove, the higher the comfort. The heat accumulation on the inside of a glove after one hour of static wear shows that there is correlation between hand temperature and HMPE content of the glove.

a dsm brand

cotton

cotton

aramid

aramid

leather

leather

0-100x cycles

100-500 x cycles

500-2000x cycles

2000-8000x cycles

>8000x cycles

00

20 0,05

400,1

60

0,15

80

0,25

0,2100

120

WEAR

HEA

T R

ELEA

SES

RAT

EJ/

cm2 /

s.

REL

ATIV

E C

R D

ECLI

NE

ON

AST

M

37

The picture visualises what the end user will feel. The hands will stay dry and cool when wearing gloves all day – the actual temperature will stay close to body temperature. Gloves with other fibres cause an increase of hand temperature of several degrees above body temperature. The result is that the more HMPE fibre used in the glove, the more comfortable and cooler it will feel.

Summary of Benefits

cut resistance Protection towards mechanical risks

cost-efficient High durability due to high abrasion resistance Chemical resistance Launder ability (< 90 °C) UV resistance

comfort Light, thin and flexible High dexterity No skin irritation Quick heat release

The more Dyneema®, the cooler the hand.

40°c

36°c 0% 50% 95%

laboRaToRy TEsTs

38 39

en388 protective gloves against mechanical risksThe following equipment is used to assess the properties of gloves specified by the EN388 standard.

a martindale wear and abrasion tester is used to measure the abrasion resistance. The test involves rubbing samples, cut from the palms of gloves, against a standard glass paper until a hole is worn through one of the samples. The number of abra-sion cycles is used to assess the performance.

a sodemat (coup) cut tester is used to measure the resist-ance to cutting. Samples are cut from gloves and placed in a frame which enables a circular, counter-rotating blade to slice through the glove material. The number of cycles required by the blade to cut through the glove are recorded. These are con-verted into a cutting index by comparison with the number of cycles required to cut through a standard reference material. The standard now allows for an alternative test method to be used for highly cut resistant products and this test is described in EN ISO 13997. It measures the force required to make a cut in the test sample 20mm long and is often referred to as the

ISO Cut Test. Performance levels are established according to cutting index.

Puncture and tear resistance are measured with a tensometer. Puncture resistance is measured as the force required to break through samples from gloves with a standard puncture needle (it should be noted that the design of this needle is comparable to that of a large nail, and the puncture strength from this test cannot be used to assess resistance to puncture by hypodermic needles). Tear resistance is measured as the force required to tear apart samples from the glove, which are in the form of a pair of trou-sers (this test is also known as a trouser tear test). The legs of the trouser samples are pulled apart and the maximum force used to assess tearing resistance of the material.

en420 general requirements for glovesThis standard includes tests for glove dimensions, dexterity and allergens. For example, leather gloves are required to have a chromium VI content less than the limit of detection. Gloves are required to be neutral with respect to skin contact.

Coup Cut Machine

performance level 1 2 3 4 5

abrasion cycles 100 500 2000 8000 n/a

cutting index 1.2 2.5 5 10 20

tear Force (n) 10 25 50 75 n/a

puncture Force (n) 20 60 100 150 n/a

iso cut load (n) ≥13 ≥22

sizE guidE

39

pskade

Sticky Note

change Polyco to RX

40 41

RANGE SAFETy GLOVES

rX® chemresist

rX® dyneema safe3

rX® top-Flex pu

rX® nitri-4-grip

rX® durafit nFt

cuT REsiTanT gloVEs

41

RX® DyNEEMA SAFE3

test perFormance level

Abrasion 4

Cut 3

Tear 4

Puncture 3

GLOVE TyPE Reusable

OFFERS PROTECTION FROM Cuts

WORKING ENVIRONMENTS Indoor, outdoor, dry, oil, grease, dirty

LEVEL OF GRIP High

LEVEL OF DEXTERITy High

Resistance against mechanical hazards

size 6 7 8 9 10

part. n° RX-PG-CR6 RX-PG-CR7 RX-PG-CR8 RX-PG-CR9 RX-PG-CR10

colour Grey Grey Grey Grey Grey

packaging 12 pair/pack - 48 pair/box 12 pair/pack - 48 pair/box 12 pair/pack - 48 pair/box 12 pair/pack - 48 pair/box 12 pair/pack - 48 pair/box

Features

comfort The seamless construction provides an exceptional level of comfort, whilst the open back style allows excellent breathability.

strength This lightweight glove with Dyneema® provides excellent resistance to cut, abrasion and tear.

dexterityThe glove has been designed to be tight fitting to give maximum dexterity for the most tactile of operations.

knitted wristElasticated, for a snug fit. The knitted wrist is extra long for optimal wrist protection.

applications Component handling Assembly Electronics Cutting activities

en 388: 2003

4343

Seamless knitted Dyneema® glove with polyurethane coating

PREcision gloVEs

42 43

RX® TOP-FLEX PU BLACK & WHITE


Abrasion 4

Cut 1

Tear 4

Puncture 2

GLOVE TyPE Reusable

OFFERS PROTECTION FROM Abrasion


LEVEL OF GRIP High


Resistance against Mechanical Hazards

Features

comfort Seamless for extra comfort, whilst the open back style allows excellent breathability.

low linting Reduces the risk of product contamination.

dexterityThe glove has been designed to be tight fitting to give maximum dexterity for the most tactile of applications.

knitted wristElasticated for a snug fit

applications Component handling Assembly Electronics Light engineering

en 388: 2003

4142

Seamless knitted nylon glove with polyurethane coating

size 6 7 8 9 10

part. n° RX-PG-TF6-W RX-PG-TF7-W RX-PG-TF8-W RX-PG-TF9-W RX-PG-TF10-W

colour White White White White White


size 6 7 8 9 10

part. n° RX-PG-TF6-Z RX-PG-TF7-Z RX-PG-TF8-Z RX-PG-TF9-Z RX-PG-TF10-Z

colour Black Black Black Black Black


safETy gloVEs foR EXTRa gRiP

43

GLOVE TyPE Reusable

OFFERS PROTECTION FROM Abrasion


LEVEL OF GRIP High


RX® NITRI-4-GRIP


Abrasion 4

Cut 1

Tear 2

Puncture 1

Resistance against mechanical hazards

Features

comfort The soft seamless knitted yarn provides an exceptional level of comfort, whilst the open back style allows excellent breathability.

dexterity and fitThe snug fit provides maximum dexterity for the most tactile of applications.

dry and wet gripAs well as providing excellent dry grip, Nitri-4 Grip chan-nels oils and liquids away from the surface ensuring su-perb wet grip.

applications Component handling Assembly

Seamless knitted nylon glove with light porous breathable foam nitrile coating

en 388: 2003

4121

size 6 7 8 9 10

part. n° RX-PG-GF6 RX-PG-GF7 RX-PG-GF8 RX-PG-GF9 RX-PG-GF10

colour White White White White White


all Round safETy gloVE

44 45

RX® DURAFIT NFT


Abrasion 4

Cut 1

Tear 2

Puncture 1

GLOVE TyPE Reusable

OFFERS PROTECTION FROM Abrasion, scratches, dirt


LEVEL OF GRIP High


Features

dry and wet grip The foamed nitrile coating channels liquids away from the glove surface, ensuring superb wet grip.

durabilityOutstanding abrasion resistance, for longevity and durability.

dexterity and fit The breathable, seamless liner provides outstanding dexterity and a snug fit for the most tactile of applications.

applications Component handling Assembly Electronics Light engineering Construction Automotive

Seamless nylon glove with a foamed nitrile palm coating

Protective gloves against mechanical risks

size 6 7 8 9 10

part. n° RX-PG-DF6 RX-PG-DF7 RX-PG-DF8 RX-PG-DF9 RX-PG-DF10

colour Black Black Black Black Black


en 388: 2003

4121

45

chEmical REsisTanT gloVEs

RX® CHEMRESIST


Abrasion 4

Cut 1

Tear 0

Puncture 1

GLOVE TyPE Reusable

OFFERS PROTECTION FROM Chemicals


LEVEL OF GRIP High


Protective gloves against mechanical risks

Protection against micro-organisms

Chemical resistant glove. The letters represent the chemicals from the list of 12 standard chemicals. For these chemicals a break-through period of >30 min was reached. For more information on chemical categorization visit www.hse.gov.uk

Featuresperformance Offers very good abrasion and puncture resistance, and protection against a wide range of chemicals including strong detergents, oils and certain solvents.

comfort Anatomically shaped ensuring comfort, and reducing hand fatigue.

good grip Slip resistant raised diamond pattern on palm of glove ensuring good grip in both wet and dry conditions.

Flock lined Soft cotton flock lining absorbs perspiration keeping hands cool. Easier to put on and take off.

sanitized Contains a fungicidal and bacteriostatic agent.Thickness: 0.38mm (measured on the palm)Lengte: 33 cm

anti-static properties Meets the surface resistivity requirements of EN1149 part1: 1995.

applications

Synthetic rubber glove with nitrile coating

en 374: 2003

Graphics industry Agriculture Production & assembly Food manufacturing &

preparation

Automotive Engineering & manufacture Chemical manufacture & use Laboratory & pharmaceutical Janitorial

size 6 7 8 9 10

part. n° RX-PG-NI6 RX-PG-NI7 RX-PG-NI8 RX-PG-NI9 RX-PG-NI10

colour Green Green Green Green Green


en 388: 2003

4101

en 374: 2003

aJk

noTEs

4746 47

caTalogs

4747

ERIKS’ catalogsERIKS continuously invests in the creation and updating of catalogs.

Materials Handling

RX Spill Control

Format Tools

Tech Direct

Tools & Maintenance

Know+How

join our mailing list for the latest eriKs publications

Call 0845 006 6000www.eriks.co.uk

Business

ERIKS RX PPE Catalogue