ERIKS Maintenance Electricians Toolkit

Maintenance Electricians Toolkit

2

LOCAL SERVICE

Combination Pliers VDE

Gripping zones for flat and round material.

▪ Cutting edges for soft and hard wire ▪ Special tool steel, forged, oil hardened ▪ Long cutting edges for thicker cable

Part number Size mm

W90A-51540160 160

W90A-51540180 180

W90A-51540200 200

Diagonal Side Cutting Pliers VDE

Precision cutting edges for soft and hard wire

▪ Clean cutting of thin copper wires, also at the cutting edge tips ▪ Vanadium electric steel, forged , oil hardened. ▪ Narrow head style for use in confined areas

Part numberSize mm

W90A-53050125 125

W90A-53050140 140

W90A-53050160 160

W90A-53050180 180

Diagonal Insulation Stripper VDE

Precision stripping holes for single (solid) conductors of 1.5 and 2.5mm²

▪ Induction hardened precision blades for soft wire up to 4.0mm dia, cutting edge hardness approx 60 HRC

▪ Vanadium electric steel, forged, oil hardened.

Part Number

W90A-53080160

Snipe Nosed Side Cutting Pliers VDE

Suitable for finer gripping and cutting work

▪ Pointed, half round jaws ▪ Serrated gripping surfaces ▪ Cutting edges for medium hard and hard wire ▪ Vanadium electric steel, forged, oil hardened. ▪ 200mm Length

Part Number

W90A-52300200

Wire Stripping Pliers VDE

For single, multiple and fine stranded conductors with plastic or rubber insulation up to a maximum of 5.0mm dia

▪ Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut

▪ Special tool steel, forged, oil hardened ▪ 160mm length

Part Number

W90A-54590160

Water Pump Pliers VDE

Chrome vanadium steel, oil hardened

▪ Gripping surfaces with specially hardened teeth ▪ Multi component handles ▪ Insulated up to 1,000v

Part NumberW90A-56110250

3

OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm

Cable Shears VDE

For cutting copper and aluminium single conductors as well as multiple stranded cables

▪ Not suitable for steel wire and hard drawn copper conductors ▪ Precision ground, hardened blades ▪ High grade special tool steel, forged, oil hardened. ▪ 165mm length

Part Number

W90A-53810165

Combination Pliers

Induction Hardened Cutting Edges

▪ 2 Component Soft Grip Handles ▪ Polished Head

Part Number Length (mm)

Cutting Capacity

(mm)

W90A-51490160 160 1.8

W90A-51490180 180 2.5

W90A-51490200 200 2.8

Diagonal Side Cutting Pliers

Induction Hardened Cutting Edges, for Hard and Soft Wire

▪ 2 Component Soft Grip Handles ▪ Polished Head

Part Number Length (mm)

Cutting Capacity

(mm)

W90A-52920125 125 1.5

W90A-52920140 140 1.8

W90A-52920160 160 2.0

W90A-52920180 180 2.5

Long Nosed Pliers

DIN ISO 5745

▪ Special Tool Steel, Induction Hardened ▪ 2 Component Soft Grip Handles ▪ Chromium Plated Head ▪ 160mm Long


Bent Nosed Radio Pliers

DIN ISO 5745

▪ Special Tool Steel, Induction Hardened With a 45deg Curve ▪ 2 Component Soft Grip Handles ▪ Chromium Plated Head ▪ 200mm Long


3 Piece Pliers SetInduction Hardened Cutting Edges

▪ 2 Component Soft Grip Handles ▪ Polished Head ▪ Set contains-

▪160mm Diagonal Side cutting Pliers

▪180mm Combination Pliers

▪200mm Radio Pliers


4

LOCAL SERVICE

VDE Insulated Slotted Screwdriver

With Lasertip® and nicromat surface technology. The contact force is thereby reduced and prevents slipping out of the screw head.

▪ Ergonomic Kraftform® Plus handle ▪ insulated up to 1,000 V

Part Number Tip Width (mm)

length (mm)

W90A-62820025 2.5* 80

W90A-62820030 3.0* 100

W90A-62820035 3.5 100

W90A-62820040 4.0 100

W90A-62820055 5.5 125

W90A-62820065 6.5 150

W90A-62820080 8.0 175

* Without Lasertip®

VDE Insulated Phillips Screwdriver

▪ Lasertip® surface ▪ Ergonomic Kraftform® Plus handle ▪ insulated up to 1,000 V

Part Number PH Size length (mm)

W90A-63320000 PH0* 80

W90A-63320001 PH1 80

W90A-63320002 PH2 100

W90A-63320003 PH3 150

* Without Lasertip®

VDE Insulated Pozidriv Screwdriver

▪ Lasertip® surface ▪ Ergonomic Kraftform® Plus handle ▪ insulated up to 1,000 V

Part Number PZ Size length (mm)

W90A-63440001 PZ1 80

W90A-63440002 PZ2 100

W90A-63440003 PZ3 150

VDE Insulated Slotted / Phillips Plus Minus Screwdrivers

Plusminus screwdrivers for use in terminal blocks, control cabinets, switches, relays, sockets etc.

▪ Created for the new combination Plus/Minus electrical terminal screws

▪ Combines Phillips and Slotted head to give great grip and feel in the screw head

▪ SoftFinish grips for comfortable use all day ▪ German made, 5 year warranty

Part Number Size length (mm)

W42G-52809 PH/S 1 80

W42G-52808 PH/S 2 100

W42G-52806 PZ/S 1 80

W42G-52807 PZ/S 2 100

5


Wiha TorqueVario® VDE Electricians Screwdriver Set17th Edition Wiring Regulations stipulate adhering to torque settings. Germany’s Wiha Tools have converged their 1000V VDE knowledge with their EN6789 torque knowledge to now offer electrians’ the ultimate solution.

▪ VDE insulation for use near live electrical circuits ▪ Broad 1.0 to 5.0Nm clutch ideal for everything from 1Nm

Auxiliaries and 2.5Nm MCBs right up to 5Nm Isolators ▪ Six slim technology slim Bits included with a further twenty sizes

available ▪ slim technology for access to deep screws whilst still having

1000V VDE safety ▪ Direct drive handle included for general use of the slim Bits all

day ▪ Torque accurate to +-6% international standards BS EN 6789 ▪ Ideal for 17th Edition Wiring Regulation 134.1.1 ▪ German made, 5 year Warranty

Part Number

W42G-53571

VDE insulated 7pc Screwdriver Sets ▪ Featuring Lasertip® technology ▪ Kraftform multi-component handles with non roll feature ▪ Available in slotted/Phillips and slotted/Pozidriv ▪ insulated up to 1,000 V ▪ Each set includes a voltage tester

Part Number Set contains

W90A-63500140

Slotted 3.5 x 754 x 90

5.5 x 1006.5 x 125

PH1 & PH2Voltage tester

W90A-63500150


5.5 x 1006.5 x 125

PZ1 & PZ2Voltage tester

6

LOCAL SERVICE

Slotted Head Screwdrivers

▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection

Part Number Tip Width (mm)

Blade Length (mm)

W90A-62660025 2.5 75

W90A-62660030 3 75

W90A-62660035 3.5 125

W90A-62660040 4 100

W90A-62660045 4.5 90

W90A-62660055 5.5 100

W90A-62660070 7 130

W90A-62660090 9 160

W90A-62660100 10 185

W90A-62660120 12 200

Phillips Cross Head Screwdrivers


Part Number PH Size Blade Length (mm)

W90A-63000001 1 80

W90A-63000002 2 100

W90A-63000003 3 150

Pozidriv Cross Head Screwdrivers


Part Number PZ Size Blade Length (mm)

W90A-63360001 1 80

W90A-63360002 2 100

W90A-63360003 3 150

6 Piece Slotted & Phillips Screwdriver Set ▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection ▪ Set Contains:

▪ Slotted 4.5 x 90 ▪ 5.5 x 100 ▪ 7 x 125 ▪ 9 x 150mm ▪ Phillips PH1& PH2


6 Piece Slotted & Pozidriv Screwdriver Set ▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection ▪ Set Contains:

▪ Slotted 4.5 x 90 ▪ 5.5 x 100 ▪ 7 x 125 ▪ 9 x 150mm ▪ Phillips PZ1& PZ2


7


6pc Screwdriver Sets with Hexagonal Blade ▪ Featuring Lasertip® technology ▪ Kraftform multi-component handles with non roll feature ▪ Available in slotted/Phillips and slotted/Pozidriv

Part Number Set contains

W90A-63500160


5.5 x 1006.5 x 125

PH1 & PH2

W90A-63500165


5.5 x 1006.5 x 125

PZ1 & PZ2

7 Piece Slotted Screwdriver Set ▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection ▪ Set Contains:

▪ 3 x 80 ▪ 3.5 x 125 ▪ 4.5 x 90 ▪ 5.5 x 100 ▪ 7 x 125 ▪ 9 x 150 ▪ 10 x 175mm


10 Piece Screwdriver Set ▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection ▪ Set Contains:

▪ Slotted 3 x 75 ▪ 4.5 x 90 ▪ 5.5 x 100 (2pcs) ▪ 7 x 130mm ▪ Phillips PH1& PH2 (2pcs) ▪ Pozidriv PZ1& PZ2


8

LOCAL SERVICE

Hexagon Nut Drivers

Round blade , micro-matt.

▪ 2 component anti-slip handle ▪ 125mm long

Part number Hex size (mm)W90A-58000050 5.0

W90A-58000055 5.5

W90A-58000060 6.0

W90A-58000070 7.0

W90A-58000080 8.0

W90A-58000090 9.0

W90A-58000100 10.0

W90A-58000110 11.0

W90A-58000120 12.0

W90A-58000130 13.0

VDE Insulated Hexagon Nut Drivers

VDE insulated, individually inspected as per IEC 60900:2004

▪ Zinc phosphate ▪ Kraftform multi-component handle with

non-roll feature.

Part Number Hex Size (mm)W90A-58030055 5.5

W90A-58030060 6.0

W90A-58030070 7.0

W90A-58030080 8.0

W90A-58030090 9.0

W90A-58030100 10.0

W90A-58030110 11.0

W90A-58030120 12.0

W90A-58030130 13.0

Self Grip Universal Pliers

With adjusting screw and quick release lever

▪ Bright nickel plated

Part Number Length mmW90A-56300180 180

W90A-56300250 250

W90A-56300300 300

Crimping Tool KitCrimping tool kit comprising of an assortment of crimp terminals for conductor sizes 0.25mm to 6.00mm Complete with HP3 crimping tool and storage box

Part NumberW13C-50000

Metric Hexagon Wrench Sets with Ball End, Long

▪ Chrome Vanadium Steel ▪ In Plastic Holder

Part Number No of Pieces Contains

W90A-58580005 8 2, 2.5, 3, 4, 5, 6, 8, 10mm

W90A-58580010 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

Hexagon Wrench SetsIn plastic case

Part Number No of Pieces Contains

W90A-58470025 6 2.5, 3, 4, 5, 6, 8mm

W90A-58470030 7 2.5, 3, 4, 5, 6, 8, 10mm

9


Electricians Scissors

Plastic coated finger loops

▪ Small groove in blade for stripping cables ▪ 45mm cutting length

Part Number DescriptionW09A-59692 Normal Blade

W09A-59693 Serrated Blade

Electricians Knife

Electrician’s pocket folding knife

▪ Stainless steel blade with plastic handle ▪ Wire stripping shape

Part Number W09A-51751

Metric / Imperial Pocket Tape

Metric / Imperial

▪ Stainless steel blade ▪ Nylon coated easy to read ▪ Magnetic tip ▪ Automated blade lock

Part Number LengthW09A-14743 5M / 16ft

W09A-14778 8M / 26ft

50ft Electricians Fish Tape

Pulls cables through conduit

▪ Side handle with brake ▪ Made from flexible spring steel

Part NumberW10F-50000

Insulated Electricians Knife

For work on live equipment up to 1000 volts

▪ 3 layer colour insulation coating ▪ IEC 60900, VDE certified


Claw HammersFibreglass handle for maximum shock absorption

▪ Octagonal neck and round head ▪ Bright polished ▪ Comfortable black hand grip ▪ Bright orange colour to make it

easier to find

Part Number Weight (oz/g)W09A-53627 20oz/580g

W09A-53628 28oz/800g

W09A-53630 32oz/880g

10

LOCAL SERVICE

Insulated Junior Hacksaw

VDE rated junior hacksaw

▪ 150mm ▪ Fitted with a 150mm 25tpi blade


80 Series Phosphated Adjustable Wrench

80 series adjustable wrench manufactured to DIN 3117 Form A. Phosphate finish precision-hardened and anti-corrosion treated.

Part Number Type SizeW09A-12221 8070 6” (150mm)

W09A-12222 8071 8” (200mm)

W09A-12204 8072 10” (250mm)

W09A-12205 8073 12” (300mm)

W09A-12223 8074 15” (375mm)

W09A-12206 8075 18” (450mm)

Electricians Holesaw Set

▪ Set contains 22, 29, 35, 44, 51, 64, 68mm holesaws ▪ 2 Arbors ▪ Pilot drill ▪ Supplied in a case


Electricians Stripping Tool

Precise, rapid and safe stripping of all commonly used round cable from 4mm to 28mm dia.

▪ Self-rotating inner knife for round and length cutting ▪ Self-tensioning fixing bracket for safe cable mounting ▪ Convenient stripping with steplessly adjustable cutting depth

via setting screw and self rotating inner knife ▪ Damage to inner conductors is therefore impossible ▪ Spare blade in the tool. ▪ Ergonomically designed lower tool body.

Part NumberW42G-53553

239 Junior Hacksaw

150mm 6inch

▪ Frame of rigid zinc plated flat steel and an ergonomic plastic, pistol-grip styled handle.

▪ Replacing and tensioning of blade through adjustment of the nut incorporated in the handle.

Part Number DescriptionW09A-14317 150MM (6IN) Hacksaw

W09A-14024 Pack of 10 saw blades

11


Automatic Wire StrippersCompact standard tool for all current cable cross-sections, and insulating materials.

▪ For single, multiple and fine stranded cables of 0.2 up to 6.0mm² with standard insulation

▪ Adapts automatically to the respective cable cross section. Prevents damage to the conductor.

▪ Adjustable length stop from 6.0 - 18.0mm for cutting the same stripping lengths during repetitive work

▪ Wire cutter for copper and aluminium wires up to 2.5mm²


VT2 Non-Contact Voltage Indicator

The VT2 is a non-contact voltage indicator for voltages between 200 and 1000 volts.

▪ Check for presence of AC voltage in wall sockets, cables, circuit breakers and many other places

▪ A red light in the tip illuminates when AC volts are detected.

Part NumberW07H-50253

VT12 Voltage Indicator

The Martindale VT12 is an excellent value Voltage and Continuity tester. Constructed in accordance with the latest safety standards and guarantees safe and reliable measurements and testing.Automatic AC/DC detection up to 690V and continuity testing with optical and acoustic indication up to 200k ohms, with polarity indication.


MM64 Digital Multimeter

▪ 600v AC/DC ▪ 0.1µA - 200mA ▪ 1Hz - 40Hz frequency ▪ 0.1µF - 20mF capacitence ▪ Temperature measurement ▪ Continuity & diode test


12

LOCAL SERVICE

CM54 1000A AC Clamp MeterA low cost 1000A AC clamp meter, with basic Multimeter functions. Capable of clamping a 70 x 18mm busbar.Along with AC current, it also measures AC and DC volts, resistance and continuity. Includes Max and Hold buttons.

▪ AC current 100mA - 1000A ▪ 750V AC, 1000V DC ▪ 2000M resitance range ▪ Audible continuity ▪ Jaw diameter 57mm ▪ Supplied with standard test leads, carry case and battery


MARLOKKIT1 Lock-off KitThe Martindale universal lock-off kit is compatible with most circuit breakers. It is supplied with a padlock with a unique key, and a safety hasp that enables multiple users to lock off with space for up to 6 padlocks.


13


Prosafe LED Flashlight

160 lumen white CREE LED

▪ Aluminium, made for durability ▪ Focus control with dimming function ▪ Tactical switch operation ▪ Water resistant

▪ Uses and includes 2 x AA batteries ▪ Includes nylon carry strap and pouch

Part NumberW24B-50000

Thread Restorer

For cleaning out blocked threads in electrical boxes

Part Number Thread Size (mm)W24C-10132 M3.5 x 0.6

W24C-10133 M4 x 0.7

Duracell Procell

The leading industrial and commercial battery in the UK

▪ New improved performance ▪ Advanced longer life power for professional usage ▪ Proven, trusted, reliable energy source ▪ Packed in reclosable boxes of 10 ▪ For professional and volume usage

Part number Type VoltageW70B-10173 AA/LR6 1.5

W70B-10171 AAA/LR03 1.5

W70B-10170 9V/6LR61 9

W70B-10175 C/LR14 1.5

W70B-10176 D/LR20 1.5

Masonry Drill Set

▪ All steel case ▪ set contains:

▪ 4, 5, 6, 6, 8, 10, 12mm drills


7pc SDS-Plus Hammer

Control Cabinet Wrench ▪ Zinc cast iron ▪ 6 7 & 8mm Squares ▪ 9mm three square ▪ Flange with chain 3 to 5mm ▪ double bit slot 1 x 7mm and PH2 ▪ Plastic adaptor 1/4” and square

radiator valve wrench


Drill Set

▪ All Steel Case ▪ Set contains:

▪ 5 x 110, 6 x 110, 6 x 160, 8 x 160, 10 x 160, 12 x 160


14

LOCAL SERVICE

WD40Cleans - Agitates dirt, marks and grease making it easy to wipe away. Also dissolves adhesives for removal of residue

▪ Protects - Corrosion resistant ingredients shield against moisture

▪ Lubricates - Lubricating agents hold firmly to moving parts

▪ Penetrates - Loosened rust to metal bonds and frees frozen parts.

Part Number SizeW84A-33740 100ml

W84A-33720 250ml

W84A-33722 450ml

W84A-33723 600ml

Knee Pads

▪ Hook and loop fastening ▪ Soft ‘bear’ lining ▪ Made from strong synthetic leather with rubber

Part numberW09A-60293

RX® Max WipeRX® Max wipes are industrial tried and tested, heavy duty hand and surface cleaner. Max wipes will help clean the hands and many surfaces of oil and water based paint, adhesives, sealants, oil, grease and more. Max wipes are also effective against pathogenic bacteria and viruses.

▪ Anti-bacterial, Anti viral action ▪ Contains 80 wipes


RX® Multi WipeRX® Multi Wipes are an industry heavy duty hand and surface moise cleaning wipe. RX® Multi Wipes will clean hands and many sufaces of oil and water based paint, adhesives, sealants, oil, grease and more.Anti-bacterial, Anti viral action

▪ Quickly cleans hands - without water ▪ Contains 150 wipes


15


RX® Flat-Fold Disposable Mask

A single use, lightweight, ergonomically shaped disposable respirator for protection against non toxic and toxic particles.

▪ Lightweight; P1 & P1V = 2g; P2 &P2V = 3g, P3V = 4g ▪ Multi layered filter medium electrostatically charged ▪ Ergonomically shaped for comfort and ease of use ▪ Adjustable head straps to provide individual fit ▪ Adjustable nose clip to ensure a good seal around the nose ▪ Individually packed complete with instructions for use ▪ Conforms to the European approved standard EN149:2001 +

A1:2009NR ▪ Non-allergenic ▪ Exhalation Valve added for easier breathing (P1V, P2V & P3V)

Part Number Description PackagingNormal

Protection Factor

Assigned Protection

FactorW93L-50028 RX FF P1 disposable mask folded 20 4 4

W93L-50027 RX FF P1V disposable mask folded + valve 10 4 4

W93L-50029 RX FF P2 disposable mask folded 20 12 10



RX® Dyneema Safe3 Cut Resistant GlovesSeamless knitted Dyneema® glove with polyurethane coating.

▪ Comfort - The seamless construction provides an exceptional level of comfort, whilst the open back style allows excellent breathability

▪ Strength - This lightweight glove with Dyneema® provides excellent resistance to cut, abrasion and tear

▪ Dexterity - The glove has been designed to be tight fitting to give maximum dexterity for the most tactile of operations

▪ Knitted Wrist - Elasticised, for a snug fit. The knitted wrist is extra long for optimal wrist protection.

▪ Applications - Component handling, assembly, electronics and cutting activities ▪ Colour - Grey ▪ sold in packs of 12 pairs

Part Number SizeW93L-50057 6

W93L-50059 7

W93L-50058 8

W93L-50056 9

W93L-50055 10

16

LOCAL SERVICE

Electricians Gloves™Excellent electrical resistance

▪ Class 00 - max working AC voltage 500v ▪ Class 0 - max working AC voltage 1,000v ▪ Class 1 - max working AC voltage 7,500v ▪ Class 2 - max working AC voltage 17,000v ▪ Class 3 - max working AC voltage 26,500v ▪ Class 4 - max working AC voltage 36,000v

Class Size 8 Size 9 Size 10 Size 11

00 W98L-50751 W98L-50752 W98L-50753 W98L-50754

0 W98L-50755 W98L-50756 W98L-50757 W98L-50758

1 W98L-50760 W98L-50761 W98L-50762 W98L-50763

2 W98L-50764 W98L-50765 W98L-50766 W98L-50767

3 W98L-50769 W98L-50770 W98L-50771 W98L-50772

4 W98L-50780 W98L-50781 W98L-50782 W98L-50783

RX® Optiflex-C Safety Glasses

▪ Lightweight (31 g) ▪ Perfect fit (comfortable, soft components for nose, ear and

forehead) ▪ Polycarbonate lens with unique RX® coatings ▪ Ventilating ▪ The safety glasses adapt themselves without adjustments to

the contours of the face ▪ Stylish design ▪ Extremely flexible and unbreakable frame ▪ Impact test according to MIL-PRF-31013 standard (295-

201 m/s) ▪ compliant with EN166 + EN170 standards

Part Number Description

W93L-50000 Safety glasses with clear PC lens

RX® Optiflex-G Wide Vision gogglesThe RX® Optiflex-G wide-vision goggles offer the wearer better protection. Thanks to the wide coverage of the face, the adjustable headband and the superior impact resistance, the RX® Optiflex-G wide-vision goggles are a reference in the market. The sophisticated indirect ventilation system reduces fogging to a minimum. The soft silicone casing ensures an optimum comfort and protects against impact and chemical splashes.

▪ Lightweight (93 g) ▪ Ergonomically designed; 180° wide-vision goggles ▪ Highest optical quality lens class 1 ▪ CE approved, EN166 against splashes of chemical liquids,

large dust particles, molten metal ▪ Wide and fully adjustable elastic head headband. ▪ Indirect ventilation ▪ Anti-scratch and anti fog coating

Part Number DescriptionW93L-50004 Wide-vision goggles

17


RX® Securo Safety shoeThe RX® Securo is a quality safety shoe made of lightweight materials, with shock absorbent soles and composite toe protection, plus MS3 non-metallic penetration resistant midsole. This makes the RX® FOOTWEAR one of the most comfortable and stylish on the market.

▪ Composite toe cap which can resist a pressure of 200J

▪ Anti-perforation sole made from MS3 textile; very flexible, gives a much better walking comfort, isolates against the cold and/or heat, protects a larger area of the foot

▪ Scuff pad allows more ‘give’ at the point where the foot flexes. Ideal for jobs where kneeling is required.

▪ Quality uppers stabilises and supports the foot ▪ TPU heel support ▪ Reflective accents for high visibility ▪ Shock-absorbing comfort sole for better walking

comfort ▪ PU/rubber sole material; oil and petrol resistant ▪ HRO resistant to 300° C contact heat ▪ SRC sole for improved slip resistance ▪ Ladder grip prevents slipping on ladders ▪ Extra wide fit ▪ EU sizes: 38 - 47, UK sizes 5 - 12

Part Number Description UK sizeW93L-50005 RX Safety Shoe Securo 5

W93L-50006 RX Safety Shoe Securo 6

W93L-50007 RX Safety Shoe Securo 6.5





W93L-50012 RX Safety Shoe Securo 10.5



RX® Solido Safety BootThe RX® Solido is a quality safety boot made of lightweight materials, with shock absorbent soles and composite toe protection, plus MS3 non-metallic penetration resistant midsole. This makes the RX® FOOTWEAR one of the most comfortable and stylish on the market.

▪ Composite toe cap which can resist a pressure of 200J

▪ Anti-perforation sole made from MS3 textile; very flexible, gives a much better walking comfort, isolates against the cold and/or heat, protects a larger area of the foot

▪ Scuff pad allows more ‘give’ at the point where the foot flexes. Ideal for jobs where kneeling is required.

▪ Quality uppers stabilises and supports the foot ▪ TPU heel support ▪ Reflective accents for high visibility ▪ Shock-absorbing comfort sole for better walking

comfort ▪ PU/rubber sole material; oil and petrol resistant ▪ HRO resistant to 300° C contact heat ▪ SRC sole for improved slip resistance ▪ Ladder grip prevents slipping on ladders ▪ Extra wide fit ▪ EU sizes: 38 - 47, UK sizes 5 - 12

Part Number Description UK sizeW93L-50015 RX Safety Boot Solido 5

W93L-50016 RX Safety Boot Solido 6

W93L-50017 RX Safety Boot Solido 6.5





W93L-50022 RX Safety Boot Solido 10.5



18

LOCAL SERVICE

Carrying Toolbox 58cm With Carry Strap

66cm Toolbox With Organiser Lid

56cm Toolbox with Deep Non Slip Handle

Electricians Tool Pouch ▪ Reinforced material ▪ Insulation tape holder ▪ Loop large tools ▪ 1 large and 2 medium pockets ▪ Zipped pocket for documents ▪ 4 terminal screwdriver

/ pen pouches ▪ Tools not included


Universal Tool Belt ▪ Reinforced material ▪ Fits all technics accessories ▪ Adjustable size 90-120cm ▪ Quick release buckle


15 Pocket Tool belt for Tools and Small Items ▪ Reinforced material ▪ Cordless drill holster ▪ Hammer loop & tape holder ▪ Quick release buckle ▪ Tools not included


▪ Composite virgin polypropylene ▪ Wall thickness 2.5-3mm ▪ Adjustable shoulder strap ▪ Cover with 4 to 12 modular

compartments ▪ Practical designed to carry

toolbox over shoulder ▪ Non slip handle


▪ Composite virgin polypropylene ▪ Wall thickness 2.5-3mm ▪ Rounded corners for increased

resistance to impact ▪ Cover with 2 removable

organisers ▪ Portable tote tray ▪ ABS and brass closures

▪ Padlock option ▪ Non slip handle


▪ Composite virgin polypropylene

▪ Wall thickness 2.5-3mm ▪ Spacious lower compartment ▪ Side grips ▪ Portable tote tray ▪ ABS and Brass closures ▪ Padlock option

▪ Non slip handle


19


16”/410mm Hard bottom Bag

▪ Reinforced material ▪ Strong - welded plastic base ▪ 25 pockets ▪ W410 x D240 xH260mm ▪ Tools not included


12”/310mm Hard bottom Bag

▪ Reinforced material ▪ Strong - welded plastic base ▪ 17 pockets ▪ Ideal for carrying test equipment ▪ W310 x D190 x H240mm ▪ Tools not included


www.eriks.co.uk0845 006 6000

ERIKS UK

Amber Way, Halesowen

West Midlands, B62 8WG

Business

ERIKS Maintenance Electricians Toolkit